do_IRQ: 0.91 No irq handler for vector

[luisfpg]

Hi.
I keep getting this message in TTYs, and the syslog is flooded by this message: do_IRQ: 0.91 No irq handler for vector
Does anyone have any idea?

[luisfpg]

Here is the full dmesg output just after logging in:
[luis@luis-desktop ~]$ dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-15-generic (buildd@yellow) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #48-Ubuntu SMP Wed Jul 29 08:53:35 UTC 2009 (Ubuntu 2.6.28-15.48-generic)
[ 0.000000] Command line: root=UUID=be57c5ab-ba41-489e-ab50-3394f1e7d542 ro locale=pt_BR quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7fee0 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fee0000 (usable)
[ 0.000000] modified: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
[ 0.000000] modified: 000000007fee3000 - 000000007fef0000 (ACPI data)
[ 0.000000] modified: 000000007fef0000 - 000000007ff00000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] init_memory_mapping: 0000000000000000-000000007fee0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007fee0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7fee0000 @ 10000-14000
[ 0.000000] last_map_addr: 7fee0000 end: 7fee0000
[ 0.000000] RAMDISK: 37858000 - 37fef69e
[ 0.000000] ACPI: RSDP 000F75E0, 0024 (r2 AWARD )
[ 0.000000] ACPI: XSDT 7FEE30C0, 004C (r1 AWARD ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FEEB080, 00F4 (r3 AWARD ASUSACPI 42302E31 AWRD 0)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (8) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 7FEE3240, 7DDB (r1 AWARD ASUSACPI 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 7FEE0000, 0040
[ 0.000000] ACPI: HPET 7FEEB2C0, 0038 (r1 AWARD ASUSACPI 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 7FEEB340, 003C (r1 AWARD ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FEEB1C0, 0090 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 7FEEB8A0, 0304 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fee0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 0000b7bbb0] TEXT DATA BSS ==> [0000200000 - 0000b7bbb0]
[ 0.000000] #3 [0037858000 - 0037fef69e] RAMDISK ==> [0037858000 - 0037fef69e]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000f5b40] 000f5b40
[ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fee0
[ 0.000000] On node 0 totalpages: 523887
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 2531 pages reserved
[ 0.000000] DMA zone: 1396 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7109 pages used for memmap
[ 0.000000] DMA32 zone: 512795 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 5, version 0, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x11068201 base: 0xfe800000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514191
[ 0.000000] Kernel command line: root=UUID=be57c5ab-ba41-489e-ab50-3394f1e7d542 ro locale=pt_BR quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2128.009 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] allocated 20971520 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Checking aperture...
[ 0.004000] AGP bridge at 00:00:00
[ 0.004000] Aperture from AGP @ d0000000 old size 32 MB
[ 0.004000] Aperture from AGP @ d0000000 size 128 MB (APSIZE f20)
[ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2024756k/2096000k available (4749k kernel code, 452k absent, 70124k reserved, 2523k data, 532k init)
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.01 BogoMIPS (lpj=8512036)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.005124] ACPI: Checking initramfs for custom DSDT
[ 0.320144] Setting APIC routing to flat
[ 0.321762] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.362668] CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 0.364001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4262.87 BogoMIPS (lpj=8525752)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.448508] CPU1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz stepping 06
[ 0.448539] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.452060] Brought up 2 CPUs
[ 0.452063] Total of 2 processors activated (8518.89 BogoMIPS).
[ 0.452295] CPU0 attaching sched-domain:
[ 0.452298] domain 0: span 0-1 level MC
[ 0.452301] groups: 0 1
[ 0.452307] CPU1 attaching sched-domain:
[ 0.452309] domain 0: span 0-1 level MC
[ 0.452311] groups: 1 0
[ 0.452392] net_namespace: 1400 bytes
[ 0.452392] Booting paravirtualized kernel on bare hardware
[ 0.452392] Time: 20:23:54 Date: 08/09/09
[ 0.452392] regulator: core version 0.5
[ 0.452392] NET: Registered protocol family 16
[ 0.452392] ACPI: bus type pci registered
[ 0.452392] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.452392] PCI: MCFG area at e0000000 reserved in E820
[ 0.469306] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.469311] PCI: Using configuration type 1 for base access
[ 0.469357] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.469361] mtrr: probably your BIOS does not setup all CPUs.
[ 0.469366] mtrr: corrected configuration.
[ 0.473620] ACPI: EC: Look up EC in DSDT
[ 0.490534] ACPI: Interpreter enabled
[ 0.490539] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.490571] ACPI: Using IOAPIC for interrupt routing
[ 0.504725] ACPI: No dock devices found.
[ 0.504739] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.504810] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.505351] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.505356] pci 0000:00:02.0: PME# disabled
[ 0.505418] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.505422] pci 0000:00:03.0: PME# disabled
[ 0.505498] pci 0000:00:0f.0: reg 10 io port: [0xfc00-0xfc07]
[ 0.505506] pci 0000:00:0f.0: reg 14 io port: [0xf800-0xf803]
[ 0.505513] pci 0000:00:0f.0: reg 18 io port: [0xf400-0xf407]
[ 0.505521] pci 0000:00:0f.0: reg 1c io port: [0xf000-0xf003]
[ 0.505529] pci 0000:00:0f.0: reg 20 io port: [0xec00-0xec0f]
[ 0.505536] pci 0000:00:0f.0: reg 24 io port: [0xe800-0xe8ff]
[ 0.505612] pci 0000:00:0f.1: reg 20 io port: [0xe400-0xe40f]
[ 0.505701] pci 0000:00:10.0: reg 20 io port: [0xe000-0xe01f]
[ 0.505723] pci 0000:00:10.0: supports D1 D2
[ 0.505725] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.505729] pci 0000:00:10.0: PME# disabled
[ 0.505787] pci 0000:00:10.1: reg 20 io port: [0xdc00-0xdc1f]
[ 0.505809] pci 0000:00:10.1: supports D1 D2
[ 0.505811] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.505815] pci 0000:00:10.1: PME# disabled
[ 0.505873] pci 0000:00:10.2: reg 20 io port: [0xd800-0xd81f]
[ 0.505895] pci 0000:00:10.2: supports D1 D2
[ 0.505897] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.505901] pci 0000:00:10.2: PME# disabled
[ 0.505959] pci 0000:00:10.3: reg 20 io port: [0xd400-0xd41f]
[ 0.505981] pci 0000:00:10.3: supports D1 D2
[ 0.505983] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.505987] pci 0000:00:10.3: PME# disabled
[ 0.506024] pci 0000:00:10.4: reg 10 32bit mmio: [0xdffff000-0xdffff0ff]
[ 0.506067] pci 0000:00:10.4: supports D1 D2
[ 0.506069] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.506074] pci 0000:00:10.4: PME# disabled
[ 0.506478] pci 0000:02:00.0: reg 10 32bit mmio: [0xdc000000-0xdcffffff]
[ 0.506490] pci 0000:02:00.0: reg 14 64bit mmio: [0xa0000000-0xbfffffff]
[ 0.506502] pci 0000:02:00.0: reg 1c 64bit mmio: [0xdd000000-0xddffffff]
[ 0.506509] pci 0000:02:00.0: reg 24 io port: [0xac00-0xac7f]
[ 0.506516] pci 0000:02:00.0: reg 30 32bit mmio: [0xdefe0000-0xdeffffff]
[ 0.506586] pci 0000:00:02.0: bridge io port: [0xa000-0xafff]
[ 0.506590] pci 0000:00:02.0: bridge 32bit mmio: [0xdc000000-0xdeffffff]
[ 0.506598] pci 0000:00:02.0: bridge 64bit mmio pref: [0xa0000000-0xbfffffff]
[ 0.506693] pci 0000:03:00.0: reg 24 32bit mmio: [0xdfefe000-0xdfefffff]
[ 0.506703] pci 0000:03:00.0: reg 30 32bit mmio: [0xdfee0000-0xdfeeffff]
[ 0.506717] pci 0000:03:00.0: PME# supported from D3hot
[ 0.506722] pci 0000:03:00.0: PME# disabled
[ 0.506775] pci 0000:03:00.1: reg 10 io port: [0xcc00-0xcc07]
[ 0.506784] pci 0000:03:00.1: reg 14 io port: [0xc800-0xc803]
[ 0.506793] pci 0000:03:00.1: reg 18 io port: [0xc400-0xc407]
[ 0.506802] pci 0000:03:00.1: reg 1c io port: [0xc000-0xc003]
[ 0.506812] pci 0000:03:00.1: reg 20 io port: [0xbc00-0xbc0f]
[ 0.506907] pci 0000:00:03.0: bridge io port: [0xb000-0xcfff]
[ 0.506912] pci 0000:00:03.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.506966] pci 0000:04:07.0: reg 10 io port: [0x9c00-0x9cff]
[ 0.506974] pci 0000:04:07.0: reg 14 32bit mmio: [0xdfdff000-0xdfdff0ff]
[ 0.507003] pci 0000:04:07.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.507014] pci 0000:04:07.0: supports D1 D2
[ 0.507016] pci 0000:04:07.0: PME# supported from D1 D2 D3hot D3cold
[ 0.507020] pci 0000:04:07.0: PME# disabled
[ 0.507063] pci 0000:00:13.1: transparent bridge
[ 0.507067] pci 0000:00:13.1: bridge io port: [0x9000-0x9fff]
[ 0.507071] pci 0000:00:13.1: bridge 32bit mmio: [0xdfd00000-0xdfdfffff]
[ 0.507100] bus 00 -> node 0
[ 0.507109] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.507668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT]
[ 0.507866] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.508076] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
[ 0.613277] ACPI: PCI Root Bridge [PCI1] (0000:80)
[ 0.613341] pci 0000:80:01.0: reg 10 64bit mmio: [0x9fffc000-0x9fffffff]
[ 0.613376] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
[ 0.613380] pci 0000:80:01.0: PME# disabled
[ 0.613436] bus 80 -> node 0
[ 0.613444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[ 0.614189] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
[ 0.614468] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.614751] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12)
[ 0.615033] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[ 0.615303] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12)
[ 0.615545] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.615787] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.616059] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12)
[ 0.616257] ACPI: WMI: Mapper loaded
[ 0.616327] SCSI subsystem initialized
[ 0.616327] libata version 3.00 loaded.
[ 0.616327] usbcore: registered new interface driver usbfs
[ 0.616327] usbcore: registered new interface driver hub
[ 0.616327] usbcore: registered new device driver usb
[ 0.616327] PCI: Using ACPI for IRQ routing
[ 0.628011] Bluetooth: Core ver 2.13
[ 0.628028] NET: Registered protocol family 31
[ 0.628028] Bluetooth: HCI device and connection manager initialized
[ 0.628028] Bluetooth: HCI socket layer initialized
[ 0.628028] NET: Registered protocol family 8
[ 0.628028] NET: Registered protocol family 20
[ 0.628037] NetLabel: Initializing
[ 0.628039] NetLabel: domain hash size = 128
[ 0.628041] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.628056] NetLabel: unlabeled traffic allowed by default
[ 0.628094] hpet0: at MMIO 0xfe800000, IRQs 2, 8, 0
[ 0.628099] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.632075] AppArmor: AppArmor Filesystem Enabled
[ 0.636009] Switched to high resolution mode on CPU 0
[ 0.636409] Switched to high resolution mode on CPU 1
[ 0.644046] pnp: PnP ACPI init
[ 0.644056] ACPI: bus type pnp registered
[ 0.650295] pnp: PnP ACPI: found 16 devices
[ 0.650297] ACPI: ACPI bus type pnp unregistered
[ 0.650308] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.650311] system 00:01: ioport range 0x500-0x50f has been reserved
[ 0.650317] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.650320] system 00:02: ioport range 0x290-0x29f has been reserved
[ 0.650322] system 00:02: ioport range 0x800-0x805 has been reserved
[ 0.650325] system 00:02: ioport range 0x880-0x88f has been reserved
[ 0.650335] system 00:0c: iomem range 0x10000000-0x10000fff could not be reserved
[ 0.650341] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.650348] system 00:0f: iomem range 0xd3000-0xd3fff has been reserved
[ 0.650351] system 00:0f: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.650354] system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.650356] system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
[ 0.650359] system 00:0f: iomem range 0xfe800000-0xfe8000ff has been reserved
[ 0.650362] system 00:0f: iomem range 0x7fee0000-0x7fefffff could not be reserved
[ 0.650365] system 00:0f: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.650367] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.650370] system 00:0f: iomem range 0x100000-0x7fedffff could not be reserved
[ 0.650373] system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.650376] system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.650379] system 00:0f: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.655092] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.655094] pci 0000:00:01.0: IO window: disabled
[ 0.655100] pci 0000:00:01.0: MEM window: disabled
[ 0.655104] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.655111] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.655114] pci 0000:00:02.0: IO window: 0xa000-0xafff
[ 0.655120] pci 0000:00:02.0: MEM window: 0xdc000000-0xdeffffff
[ 0.655125] pci 0000:00:02.0: PREFETCH window: 0x000000a0000000-0x000000bfffffff
[ 0.655132] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.655136] pci 0000:00:03.0: IO window: 0xb000-0xcfff
[ 0.655142] pci 0000:00:03.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.655147] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.655155] pci 0000:00:13.1: PCI bridge, secondary bus 0000:04
[ 0.655158] pci 0000:00:13.1: IO window: 0x9000-0x9fff
[ 0.655164] pci 0000:00:13.1: MEM window: 0xdfd00000-0xdfdfffff
[ 0.655168] pci 0000:00:13.1: PREFETCH window: 0x00000080000000-0x000000800fffff
[ 0.655185] pci 0000:00:01.0: setting latency timer to 64
[ 0.655197] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.655201] pci 0000:00:02.0: setting latency timer to 64
[ 0.655211] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.655216] pci 0000:00:03.0: setting latency timer to 64
[ 0.655224] pci 0000:00:13.1: setting latency timer to 64
[ 0.655228] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.655230] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.655233] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.655234] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.655236] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.655238] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.655240] bus: 02 index 0 io port: [0xa000-0xafff]
[ 0.655242] bus: 02 index 1 mmio: [0xdc000000-0xdeffffff]
[ 0.655244] bus: 02 index 2 mmio: [0xa0000000-0xbfffffff]
[ 0.655246] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.655248] bus: 03 index 0 io port: [0xb000-0xcfff]
[ 0.655250] bus: 03 index 1 mmio: [0xdfe00000-0xdfefffff]
[ 0.655252] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.655253] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.655255] bus: 04 index 0 io port: [0x9000-0x9fff]
[ 0.655257] bus: 04 index 1 mmio: [0xdfd00000-0xdfdfffff]
[ 0.655260] bus: 04 index 2 mmio: [0x80000000-0x800fffff]
[ 0.655262] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.655264] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.655266] bus: 80 index 0 io port: [0x00-0xffff]
[ 0.655268] bus: 80 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.655278] NET: Registered protocol family 2
[ 0.688106] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.688427] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.693527] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.694600] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.694602] TCP reno registered
[ 0.704213] NET: Registered protocol family 1
[ 0.704367] checking if image is initramfs... it is
[ 1.554959] Freeing initrd memory: 7773k freed
[ 1.559500] audit: initializing netlink socket (disabled)
[ 1.559538] type=2000 audit(1249849435.556:1): initialized
[ 1.567353] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.568508] VFS: Disk quotas dquot_6.5.1
[ 1.568555] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.569085] fuse init (API version 7.10)
[ 1.569152] msgmni has been set to 3971
[ 1.569316] alg: No test for stdrng (krng)
[ 1.569326] io scheduler noop registered
[ 1.569328] io scheduler anticipatory registered
[ 1.569330] io scheduler deadline registered
[ 1.569364] io scheduler cfq registered (default)
[ 1.569380] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.569504] pci 0000:02:00.0: Boot video device
[ 1.578634] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.578691] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.578730] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X
[ 1.578744] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.578757] pci_express 0000:00:02.0:pcie01: allocate port service
[ 1.578766] pci_express 0000:00:02.0:pcie02: allocate port service
[ 1.578776] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.578839] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 1.578886] pcieport-driver 0000:00:03.0: found MSI capability
[ 1.578927] pcieport-driver 0000:00:03.0: irq 2302 for MSI/MSI-X
[ 1.578943] pci_express 0000:00:03.0:pcie00: allocate port service
[ 1.578953] pci_express 0000:00:03.0:pcie01: allocate port service
[ 1.578963] pci_express 0000:00:03.0:pcie02: allocate port service
[ 1.578973] pci_express 0000:00:03.0:pcie03: allocate port service
[ 1.584221] aer 0000:00:02.0:pcie01: service driver aer loaded
[ 1.589352] aer 0000:00:03.0:pcie01: service driver aer loaded
[ 1.589360] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.589913] pciehp 0000:00:02.0:pcie02: HPC vendor_id 1106 device_id a327 ss_vid 0 ss_did 0
[ 1.589943] pciehp 0000:00:02.0:pcie02: service driver pciehp loaded
[ 1.590443] pciehp 0000:00:03.0:pcie02: HPC vendor_id 1106 device_id c327 ss_vid 0 ss_did 0
[ 1.590472] pciehp 0000:00:03.0:pcie02: service driver pciehp loaded
[ 1.590481] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.590641] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.590644] ACPI: Power Button (FF) [PWRF]
[ 1.590692] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.590694] ACPI: Power Button (CM) [PWRB]
[ 1.590745] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.590753] ACPI: Sleep Button (CM) [SLPB]
[ 1.590816] fan PNP0C0B:00: registered as cooling_device0
[ 1.590822] ACPI: Fan [FAN] (on)
[ 1.591834] ACPI: SSDT 7FEEB3C0, 0175 (r1 AWARD ASUSACPI 42302E31 AWRD 0)
[ 1.592195] processor ACPI_CPU:00: registered as cooling_device1
[ 1.592400] ACPI: SSDT 7FEEB7D0, 00CE (r1 AWARD ASUSACPI 42302E31 AWRD 0)
[ 1.592807] processor ACPI_CPU:01: registered as cooling_device2
[ 1.599951] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.600551] ACPI: Thermal Zone [THRM] (40 C)
[ 1.640780] Linux agpgart interface v0.103
[ 1.640789] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.640874] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.641182] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.641883] brd: module loaded
[ 1.642161] loop: module loaded
[ 1.642218] Fixed MDIO Bus: probed
[ 1.642223] PPP generic driver version 2.4.2
[ 1.642273] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 1.642296] Driver 'sd' needs updating - please use bus_type methods
[ 1.642304] Driver 'sr' needs updating - please use bus_type methods
[ 1.642344] ahci 0000:03:00.0: version 3.0
[ 1.642362] ahci 0000:03:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 1.642404] ahci 0000:03:00.0: PCI: Disallowing DAC for device
[ 1.656563] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.656567] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.656573] ahci 0000:03:00.0: setting latency timer to 64
[ 1.656692] do_IRQ: 0.99 No irq handler for vector
[ 1.656795] scsi0 : ahci
[ 1.656887] scsi1 : ahci
[ 1.656927] ata1: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe100 irq 28
[ 1.656930] ata2: SATA max UDMA/133 abar m8192@0xdfefe000 port 0xdfefe180 irq 28
[ 1.976023] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.312022] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.328127] sata_via 0000:00:0f.0: version 2.4
[ 2.328139] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.328167] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 2.328247] scsi2 : sata_via
[ 2.328306] scsi3 : sata_via
[ 2.329911] ata3: SATA max UDMA/133 cmd 0xfc00 ctl 0xf800 bmdma 0xec00 irq 21
[ 2.329913] ata4: SATA max UDMA/133 cmd 0xf400 ctl 0xf000 bmdma 0xec08 irq 21
[ 2.532010] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.696334] ata3.00: ATA-7: SAMSUNG SP2504C, VT100-50, max UDMA7
[ 2.696337] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.736349] ata3.00: configured for UDMA/133
[ 2.940030] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 2.950722] isa bounce pool size: 16 pages
[ 2.950810] scsi 2:0:0:0: Direct-Access ATA SAMSUNG SP2504C VT10 PQ: 0 ANSI: 5
[ 2.950887] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.950903] sd 2:0:0:0: [sda] Write Protect is off
[ 2.950905] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.950928] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.951002] sd 2:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.951015] sd 2:0:0:0: [sda] Write Protect is off
[ 2.951017] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.951039] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.951042] sda: sda1 < sda5 > sda3 sda4
[ 2.954462] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.954517] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.954780] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 2.954787] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 29 (level, low) -> IRQ 29
[ 2.954814] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 2.954870] scsi4 : pata_jmicron
[ 2.954918] scsi5 : pata_jmicron
[ 2.954952] ata5: PATA max UDMA/100 cmd 0xcc00 ctl 0xc800 bmdma 0xbc00 irq 29
[ 2.954954] ata6: PATA max UDMA/100 cmd 0xc400 ctl 0xc000 bmdma 0xbc08 irq 29
[ 3.275263] pata_via 0000:00:0f.1: version 0.3.3
[ 3.275429] scsi6 : pata_via
[ 3.275484] scsi7 : pata_via
[ 3.276966] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 3.276968] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 3.440461] ata7.00: ATAPI: HL-DT-STDVD-RAM GSA-H22N, 1.02, max UDMA/66
[ 3.456336] ata7.00: configured for UDMA/66
[ 3.613315] scsi 6:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22N 1.02 PQ: 0 ANSI: 5
[ 3.617450] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.617454] Uniform CD-ROM driver Revision: 3.20
[ 3.617559] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 3.617611] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 3.617744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.617763] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.617778] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.617841] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 3.617874] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdffff000
[ 3.628010] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 3.628091] usb usb1: configuration #1 chosen from 1 choice
[ 3.628120] hub 1-0:1.0: USB hub found
[ 3.628130] hub 1-0:1.0: 8 ports detected
[ 3.628244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.628257] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.628281] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.628290] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 3.628328] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 3.628371] uhci_hcd 0000:00:10.0: irq 20, io base 0x0000e000
[ 3.628436] usb usb2: configuration #1 chosen from 1 choice
[ 3.628461] hub 2-0:1.0: USB hub found
[ 3.628467] hub 2-0:1.0: 2 ports detected
[ 3.628534] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 3.628544] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 3.628580] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 3.628621] uhci_hcd 0000:00:10.1: irq 22, io base 0x0000dc00
[ 3.628687] usb usb3: configuration #1 chosen from 1 choice
[ 3.628707] hub 3-0:1.0: USB hub found
[ 3.628712] hub 3-0:1.0: 2 ports detected
[ 3.628783] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.628788] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 3.628824] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 3.628842] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d800
[ 3.628905] usb usb4: configuration #1 chosen from 1 choice
[ 3.628925] hub 4-0:1.0: USB hub found
[ 3.628930] hub 4-0:1.0: 2 ports detected
[ 3.629002] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.629010] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 3.629043] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 3.629084] uhci_hcd 0000:00:10.3: irq 23, io base 0x0000d400
[ 3.629145] usb usb5: configuration #1 chosen from 1 choice
[ 3.629165] hub 5-0:1.0: USB hub found
[ 3.629172] hub 5-0:1.0: 2 ports detected
[ 3.629290] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 3.629292] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 3.632431] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.632436] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.644078] mice: PS/2 mouse device common for all mice
[ 3.692102] rtc_cmos 00:05: RTC can wake from S4
[ 3.692140] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.692193] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 3.692260] device-mapper: uevent: version 1.0.3
[ 3.692344] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.692411] device-mapper: multipath: version 1.0.5 loaded
[ 3.692414] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.692502] cpuidle: using governor ladder
[ 3.692503] cpuidle: using governor menu
[ 3.692869] TCP cubic registered
[ 3.692928] NET: Registered protocol family 10
[ 3.693279] lo: Disabled Privacy Extensions
[ 3.693527] NET: Registered protocol family 17
[ 3.693544] Bluetooth: L2CAP ver 2.11
[ 3.693546] Bluetooth: L2CAP socket layer initialized
[ 3.693548] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.693549] Bluetooth: SCO socket layer initialized
[ 3.693575] Bluetooth: RFCOMM socket layer initialized
[ 3.693584] Bluetooth: RFCOMM TTY layer initialized
[ 3.693586] Bluetooth: RFCOMM ver 1.10
[ 3.695049] registered taskstats version 1
[ 3.695191] Magic number: 5:632:396
[ 3.695284] rtc_cmos 00:05: setting system clock to 2009-08-09 20:23:57 UTC (1249849437)
[ 3.695287] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.695288] EDD information not available.
[ 3.695323] Freeing unused kernel memory: 532k freed
[ 3.695450] Write protecting the kernel read-only data: 6688k
[ 3.751626] do_IRQ: 0.91 No irq handler for vector
[ 3.751681] do_IRQ: 0.91 No irq handler for vector
[ 3.751709] do_IRQ: 0.91 No irq handler for vector
[ 3.751739] do_IRQ: 0.91 No irq handler for vector
[ 3.751768] do_IRQ: 0.91 No irq handler for vector
[ 3.751826] do_IRQ: 0.91 No irq handler for vector
[ 3.751855] do_IRQ: 0.91 No irq handler for vector
[ 3.751884] do_IRQ: 0.91 No irq handler for vector
[ 3.896823] Floppy drive(s): fd0 is 1.44M
[ 3.920787] FDC 0 is a post-1991 82077
[ 3.941529] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.941560] r8169 0000:04:07.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.941575] r8169 0000:04:07.0: PCI: Disallowing DAC for device
[ 3.941605] r8169 0000:04:07.0: no PCI Express capability
[ 3.942157] eth0: RTL8169sc/8110sc at 0xffffc2000007e000, 00:1a:92:31:80:4c, XID 18000000 IRQ 20
[ 4.240515] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 4.326658] PM: Starting manual resume from disk
[ 4.326661] PM: Resume from partition 8:5
[ 4.326662] PM: Checking hibernation image.
[ 4.326829] PM: Resume from disk failed.
[ 4.334866] EXT4-fs: barriers enabled
[ 4.345145] kjournald2 starting. Commit interval 5 seconds
[ 4.345163] EXT4-fs: delayed allocation enabled
[ 4.345165] EXT4-fs: file extents enabled
[ 4.346034] EXT4-fs: mballoc enabled
[ 4.346038] EXT4-fs: mounted filesystem with ordered data mode.
[ 4.401773] usb 3-1: configuration #1 chosen from 1 choice
[ 4.644055] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 4.850773] usb 3-2: configuration #1 chosen from 1 choice
[ 7.077367] __ratelimit: 3261 callbacks suppressed
[ 7.077369] do_IRQ: 0.91 No irq handler for vector
[ 7.310047] do_IRQ: 0.91 No irq handler for vector
[ 7.320637] do_IRQ: 0.91 No irq handler for vector
[ 8.350018] do_IRQ: 0.91 No irq handler for vector
[ 8.430594] udev: starting version 141
[ 8.636322] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.742280] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 9.020064] parport_pc 00:0a: reported by Plug and Play ACPI
[ 9.020147] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 9.083941] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0904
[ 9.083965] usbcore: registered new interface driver usblp
[ 9.309183] nvidia: module license 'NVIDIA' taints kernel.
[ 9.563777] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 9.563787] nvidia 0000:02:00.0: setting latency timer to 64
[ 9.564165] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009
[ 9.572239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.578191] ppdev: user-space parallel port driver
[ 9.588834] agpgart: Detected VIA P4M890 chipset
[ 9.594481] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 9.615558] usbcore: registered new interface driver hiddev
[ 9.628375] input: HID 0566:3108 as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.0/input/input5
[ 9.656439] generic-usb 0003:0566:3108.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 0566:3108] on usb-0000:00:10.1-1/input0
[ 9.680057] input: HID 0566:3108 as /devices/pci0000:00/0000:00:10.1/usb3/3-1/3-1:1.1/input/input6
[ 9.712215] generic-usb 0003:0566:3108.0002: input,hidraw1: USB HID v1.10 Device [HID 0566:3108] on usb-0000:00:10.1-1/input1
[ 9.712245] usbcore: registered new interface driver usbhid
[ 9.712266] usbhid: v2.6:USB HID core driver
[ 9.774152] HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9.774240] HDA Intel 0000:80:01.0: setting latency timer to 64
[ 9.774245] HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
[ 9.797360] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
[ 9.879762] do_IRQ: 0.91 No irq handler for vector
[ 9.899490] do_IRQ: 0.91 No irq handler for vector
[ 9.909439] do_IRQ: 0.91 No irq handler for vector
[ 9.934786] lp0: using parport0 (interrupt-driven).
[ 9.946625] do_IRQ: 0.91 No irq handler for vector
[ 9.999201] do_IRQ: 0.91 No irq handler for vector
[ 10.015023] Adding 2088376k swap on /dev/sda5. Priority:-1 extents:1 across:2088376k
[ 10.557502] EXT4 FS on sda3, internal journal on sda3:8
[ 10.646089] do_IRQ: 0.91 No irq handler for vector
[ 11.360317] kjournald starting. Commit interval 5 seconds
[ 11.364173] EXT3 FS on sda4, internal journal
[ 11.364179] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.364719] __ratelimit: 43 callbacks suppressed
[ 12.364722] do_IRQ: 0.91 No irq handler for vector
[ 12.364745] do_IRQ: 0.91 No irq handler for vector
[ 12.724608] do_IRQ: 0.91 No irq handler for vector
[ 12.895631] do_IRQ: 0.91 No irq handler for vector
[ 12.895657] do_IRQ: 0.91 No irq handler for vector
[ 13.059090] do_IRQ: 0.91 No irq handler for vector
[ 13.589887] do_IRQ: 0.91 No irq handler for vector
[ 13.589912] do_IRQ: 0.91 No irq handler for vector
[ 13.608769] do_IRQ: 0.91 No irq handler for vector
[ 14.105464] do_IRQ: 0.91 No irq handler for vector
[ 15.453335] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.453338] Bluetooth: BNEP filters: protocol multicast
[ 15.495211] Bridge firewalling registered
[ 18.691102] ppdev0: registered pardevice
[ 18.740613] ppdev0: unregistered pardevice
[ 18.920605] __ratelimit: 62 callbacks suppressed
[ 18.920608] do_IRQ: 0.91 No irq handler for vector
[ 18.920629] do_IRQ: 0.91 No irq handler for vector
[ 18.920658] do_IRQ: 0.91 No irq handler for vector
[ 18.944941] do_IRQ: 0.91 No irq handler for vector
[ 18.945228] do_IRQ: 0.91 No irq handler for vector
[ 18.945431] do_IRQ: 0.91 No irq handler for vector
[ 18.945839] do_IRQ: 0.91 No irq handler for vector
[ 19.161710] do_IRQ: 0.91 No irq handler for vector
[ 21.196757] r8169: eth0: link up
[ 22.943803] do_IRQ: 0.91 No irq handler for vector
[ 30.457740] CPU0 attaching NULL sched-domain.
[ 30.457746] CPU1 attaching NULL sched-domain.
[ 30.472077] CPU0 attaching sched-domain:
[ 30.472081] domain 0: span 0-1 level MC
[ 30.472084] groups: 0 1
[ 30.472089] CPU1 attaching sched-domain:
[ 30.472091] domain 0: span 0-1 level MC
[ 30.472093] groups: 1 0
[ 31.360007] eth0: no IPv6 routers present
[ 36.006672] do_IRQ: 0.91 No irq handler for vector
[ 48.105308] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 50.325037] do_IRQ: 0.91 No irq handler for vector
[ 50.325059] do_IRQ: 0.91 No irq handler for vector
[ 53.241806] do_IRQ: 0.91 No irq handler for vector
[ 53.241856] do_IRQ: 0.91 No irq handler for vector
[ 53.327950] do_IRQ: 0.91 No irq handler for vector
[ 54.579994] do_IRQ: 0.91 No irq handler for vector
[ 54.580806] do_IRQ: 0.91 No irq handler for vector
[ 54.594205] do_IRQ: 0.91 No irq handler for vector
[ 55.446774] do_IRQ: 0.91 No irq handler for vector
[ 55.448078] do_IRQ: 0.91 No irq handler for vector
[ 55.541347] do_IRQ: 0.91 No irq handler for vector
[ 55.589649] do_IRQ: 0.91 No irq handler for vector
[ 55.657587] do_IRQ: 0.91 No irq handler for vector
[ 57.032300] do_IRQ: 0.91 No irq handler for vector
[ 57.032615] do_IRQ: 0.91 No irq handler for vector
[ 57.032702] do_IRQ: 0.91 No irq handler for vector
[ 57.032730] do_IRQ: 0.91 No irq handler for vector
[ 57.034127] do_IRQ: 0.91 No irq handler for vector

[luisfpg]

No one?
Could at least someone point me where to ask such a question?

[JohanLingen]

It seems to be related to the Asus P5VD2 motherboards, does that account for you, too?

Please refer to https://bugs.launchpad.net/ubuntu/+s...ux/+bug/480997

[luisfpg]

Yeah, my one is a P5VD2-X.
I've tried to solve this issue in the kernel mailing list, but had no success: http://linux.derkeiler.com/Mailing-L.../msg03954.html

[Andur]

Solved: The massive amount of entries in several logs occured after Installation of the ATI-Graphics Drivers on my PC...Its a bug on my VIA motherboard!

00:02.0 PCI bridge: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000a000-0000afff
    Memory behind bridge: dfa00000-dfafffff
    Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
    Capabilities: [40] Express Root Port (Slot+), MSI 00
    Capabilities: [68] Power Management version 2
    Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
    Capabilities: [88] HyperTransport: MSI Mapping Enable- Fixed+
    Capabilities: [98] Subsystem: VIA Technologies, Inc. Device c323
    Capabilities: [100] Advanced Error Reporting <?>
    Capabilities: [140] Virtual Channel <?>
    Capabilities: [180] Root Complex Link <?>
    Kernel driver in use: pcieport-driver
    Kernel modules: shpchp

To get rid of them, add a Kernel-Bootoption to your Grub-Bootloader. for Grub2 follow these steps:

1. sudo gedit /etc/default/grub
2. change GRUB_CMDLINE_LINUX_DEFAULT="quiet splash pci=nomsi,noaer"
3.sudo update-grub

and the syslog gets quiet and useable again...

[luisfpg]

Thank you so much for this tip!
Worked like a charm.
Hope the kernel devs manage to put this as default for these VIA chipsets...

[guillermolisi]

Thank you so much !!
I have two Asus P5VD2-X motherbords and this tip worked absolutely, with KK and Grub 1 in both cases.

[Life On Mars]

Thanks!

I added 'quiet splash pci=nomsi,noaer' to default options in /boot/grub/menu.lst and it worked fine

[fallenshadow]

Love you!! Got mine fixed too!