I've got a VPN tunnel established with Private Internet Access VPN. I don't mind if all the internet traffic goes through that tunnel, but there is still some traffic I'd like to pass through my regular eth0 interface.
Current traceroute
Code:traceroute to 69.16.179.26 (69.16.179.26), 30 hops max, 60 byte packets 1 10.113.1.1 (10.113.1.1) 32.193 ms 32.948 ms 33.391 ms 2 * * * 3 162.253.128.161 (162.253.128.161) 54.270 ms 52.773 ms 53.530 ms 4 te0-7-0-9.221.ccr22.yyz02.atlas.cogentco.com (38.122.69.121) 55.012 ms xe-9-2-1-31.tor10.ip4.gtt.net (199.229.229.153) 51.876 ms te0-7-0-9.221.ccr22.yyz02.atlas.cogentco.com (38.122.69.121) 53.529 ms
Current routing table
Now I add in my static route:Code:Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.113.1.5 128.0.0.0 UG 0 0 0 tun0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 10.113.1.1 10.113.1.5 255.255.255.255 UGH 0 0 0 tun0 10.113.1.5 * 255.255.255.255 UH 0 0 0 tun0 128.0.0.0 10.113.1.5 128.0.0.0 UG 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 209.222.15.237. 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0
Traceroute:Code:Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.113.1.5 128.0.0.0 UG 0 0 0 tun0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 10.113.1.1 10.113.1.5 255.255.255.255 UGH 0 0 0 tun0 10.113.1.5 * 255.255.255.255 UH 0 0 0 tun0 69.16.179.26 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0 128.0.0.0 10.113.1.5 128.0.0.0 UG 0 0 0 tun0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 209.222.15.237. 192.168.1.1 255.255.255.255 UGH 0 0 0 eth0
Why wouldn't this static route send traffic correctly?Code:traceroute to 69.16.179.26 (69.16.179.26), 30 hops max, 60 byte packets 1 192.168.1.1 (192.168.1.1) 1.167 ms 1.853 ms 1.827 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * *
Adv Reply
Bookmarks