Hi toloykhan,
Thanks for your contribution.
I need to know what modem models are supported by this application.
Hi toloykhan,
Thanks for your contribution.
I need to know what modem models are supported by this application.
HI zero-n
I had just bought zain connect Hawawi E77 and found that files in it. but I think all Hawawi other modems are supported like E220, E169 and E1690. But as I mentioned above I used E77 and it work just fine.
hi guys
am running ubuntu quental 12.10, just came by your nice thread, but i terribly need help with my c-motech canar modem it doesnt work what ever, it gives me the following message: arrahman@fatharrahman-HP-Mini-110-1100:~$ sudo apt-get install wvdialconf
[sudo] password for fatharrahman:
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo apt-get install ppp
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo wvdialconf
sudo: wvdialconf: command not found
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo kppp
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo apt-get install wvdialconf
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package wvdialconf
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo apt-get install wvdial
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
calligra-l10n-engb cdparanoia k3b k3b-data k3b-i18n kde-l10n-engb
kde-l10n-zhcn kdevelop-l10n kdevelop-php-docs-l10n kdevelop-php-l10n
language-pack-kde-en libdvdnav4 libdvdread4 libflac++6 libk3b6 libkcddb4
libmpcdec6
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
libuniconf4.6 libwvstreams4.6-base libwvstreams4.6-extras
The following NEW packages will be installed:
libuniconf4.6 libwvstreams4.6-base libwvstreams4.6-extras wvdial
0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded.
Need to get 870 kB of archives.
After this operation, 2,579 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://sd.archive.ubuntu.com/ubuntu/ quantal/main libwvstreams4.6-base i386 4.6.1-5 [210 kB]
Get:2 http://sd.archive.ubuntu.com/ubuntu/ quantal/main libwvstreams4.6-extras i386 4.6.1-5 [454 kB]
Get:3 http://sd.archive.ubuntu.com/ubuntu/ quantal/main libuniconf4.6 i386 4.6.1-5 [129 kB]
Get:4 http://sd.archive.ubuntu.com/ubuntu/ quantal/main wvdial i386 1.61-4.1 [76.6 kB]
Fetched 870 kB in 1min 51s (7,816 B/s)
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
Selecting previously unselected package libwvstreams4.6-base.
(Reading database ... 194814 files and directories currently installed.)
Unpacking libwvstreams4.6-base (from .../libwvstreams4.6-base_4.6.1-5_i386.deb) ...
Selecting previously unselected package libwvstreams4.6-extras.
Unpacking libwvstreams4.6-extras (from .../libwvstreams4.6-extras_4.6.1-5_i386.deb) ...
Selecting previously unselected package libuniconf4.6.
Unpacking libuniconf4.6 (from .../libuniconf4.6_4.6.1-5_i386.deb) ...
Selecting previously unselected package wvdial.
Unpacking wvdial (from .../wvdial_1.61-4.1_i386.deb) ...
Processing triggers for man-db ...
debconf: DbDriver "config": /var/cache/debconf/config.dat is locked by another process: Resource temporarily unavailable
dpkg: error processing man-db (--unpack):
subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
Errors were encountered while processing:
man-db
E: Sub-process /usr/bin/dpkg returned an error code (1)
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://alumnit.ca/wiki/?WvDial
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo gedit /etc/wvdial.conf
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://alumnit.ca/wiki/?WvDial
fatharrahman@fatharrahman-HP-Mini-110-1100:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7
Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15
Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23
Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://alumnit.ca/wiki/?WvDial
any ideas?
please
Teach Ubuntu as a newbie JoinComputer is not a device anymore. It is an extension of your mind and your gateway to other people
O'Reilly's CD bookshelf Ubuntu 11.04 =D>
Hi fatharraxman
wvdialconf is a tool that is included in wvdial package so you need to install wvdial package:
connect your modem to any of USB port and run this command:Code:sudo apt-get install wvdial
if it detects your modem then edit wvdial.conf file with your preferable editor like gedit or anything else:Code:sudo wvdialconf
enter your connection information user name, password and dial numberCode:gedit /etc/wvdial.conf
Salam and shukren jazeelen
I have this CanarGo USB modem
I don't know if it is the same model for which you have provided this very useful post, but i gues it is because when i insert it the syslog gives this NEW info:
I followed your steps to the letter in Part1, but when I use the command:Code:Farisalhoaba AptDaemon: INFO: Quitting due to inactivity Mar 13 18:43:35 Farisalhoaba AptDaemon: INFO: Quitting was requested Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.236078] usb 5-1: new full-speed USB device number 5 using uhci_hcd Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.394993] usb 5-1: New USB device found, idVendor=16d8, idProduct=6803 Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.395004] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.395013] usb 5-1: Product: USB Mass Storage Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.395019] usb 5-1: Manufacturer: CMOTECH CO., LTD. Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.395025] usb 5-1: SerialNumber: 000000000002 Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.397319] scsi8 : usb-storage 5-1:1.0 Mar 13 18:45:55 Farisalhoaba mtp-probe: checking bus 5, device 5: "/sys/devices/pci0000:00/0000:00:1d.0/usb5/5-1" Mar 13 18:45:55 Farisalhoaba mtp-probe: bus: 5, device: 5 was not an MTP device Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.400567] scsi 8:0:0:0: CD-ROM CMOTECH Mass Storage 2.31 PQ: 0 ANSI: 0 CCS Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.409751] sr1: scsi3-mmc drive: 372x/372x caddy Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.410158] sr 8:0:0:0: Attached scsi CD-ROM sr1 Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.413923] sr 8:0:0:0: Attached scsi generic sg2 type 5 Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.559656] sr1: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.559689] sr: Sense Key : Hardware Error [current] Mar 13 18:45:56 Farisalhoaba kernel: [ 4178.559699] sr: Add. Sense: No additional sense information Mar 13 18:45:56 Farisalhoaba usb_modeswitch: switching device 16d8:6803 on 005/005 Mar 13 18:48:36 Farisalhoaba kernel: [ 4337.936183] usb 5-1: USB disconnect, device number 5 Mar 13 18:48:36 Farisalhoaba kernel: [ 4337.938303] cdrom: issuing MRW background format suspend Mar 13 18:48:36 Farisalhoaba udevd[3726]: failed to execute '/usr/bin/cmotech-qtmodem-out' '/usr/bin/cmotech-qtmodem-out 26627': No such file or directory Mar 13 18:48:36 Farisalhoaba udevd[3729]: failed to execute '/usr/bin/cmotech-qtmodem-out' '/usr/bin/cmotech-qtmodem-out 26627': No such file or directory
I get this error message:Code:sudo wvdialconf
.Code:Scanning your serial ports for a modem Modem Port Scan<*1>: S0 S1 S2 S3 S4 S5 S6 S7 Modem Port Scan<*1>: S8 S9 S10 S11 S12 S13 S14 S15 Modem Port Scan<*1>: S16 S17 S18 S19 S20 S21 S22 S23 Modem Port Scan<*1>: S24 S25 S26 S27 S28 S29 S30 S31 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://alumnit.ca/wiki/?WvDial
I also tried to detect my modem in Gnome ppp but it says no modem was detected.
No need to mention that the modem works fine under Ms Windows
Any help?
Alslam alaikom Faris, and welcome to Ubuntu forums
sorry for the late response
from this line and can assume that it Cmotech CNU-680:
and it seems that you have installed the application that comes with the modem for Linux could you please remove and then try againCode:Mar 13 18:45:55 Farisalhoaba kernel: [ 4177.394993] usb 5-1: New USB device found, idVendor=16d8, idProduct=6803
وعليكم السلام ورحمة الله وبركاته
Thank you brother
Indeed it is because I had to revert back to Ubuntu 11.10 live session and the modem was detected out of the box as Cmotech CNU-680 and all I had to do was to enter my account name and password.
I did install the application but after failing to make the modem work.
I am glad that your problem is solved
feel free to ask here and members will help you if they can
slam
Hello ..
I'm new in using Linux I'm using openSuSE*
my question is does these steps work on all linux or only opunto ?
thanQ
Bookmarks