Hi
Here is my xorg.conf placed in /etc/X11/
Code:
Section "Device"
Identifier "Intel HD Graphics"
Driver "intel"
VendorName "INTEL Corporation"
BusID "PCI:0:2:0"
Option "monitor-VGA1" "none"
Option "monitor-DP1" "none"
Option "monitor-HDMI1" "none"
Option "monitor-HDMI2" "none"
Option "monitor-HDMI3" "HCG"
Option "monitor-DP2" "none"
Option "monitor-DP3" "none"
Option "ModeDebug" "true"
# Option "UseDisplayDevice" "HCG"
# Option "ConnectedMonitor" "HCG"
# Option "UseEDID" "FALSE"
# Option "IgnoreEDID" "true"
# Option "DDCMode" "false"
Option "noDDC"
EndSection
Section "Monitor"
Identifier "HCG"
VendorName "HarmanKardon"
Option "enable" "true"
# HorizSync 14.0 - 70.0
# VertRefresh 24.0 - 62.0
# Option "DPMS" "true"
Modeline "1920x1080@24p" 74.230 1920 2560 2604 2752 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080@50p" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080@59.94p" 148.352 1920 1960 2016 2200 1080 1082 1088 1125 +hsync +vsync
Modeline "1920x1080@60p" 148.500 1920 2008 2056 2200 1080 1084 1089 1125 +hsync +vsync
EndSection
Section "Monitor"
Identifier "none"
Option "Ignore" "true"
EndSection
Section "Screen"
Identifier "TV"
Device "Intel HD Graphics"
Monitor "HCG"
# Option "ColorRange" "Full"
# Option "ColorSpace" "RGB"
Option "UseDisplayDevice" "HCG"
Option "ConnectedMonitor" "HCG"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080@24p" "1920x1080@50p" "1920x1080@59.94p" "1920x1080@60p"
EndSubSection
EndSection
My HDMI cable is connected to amplituner AVR260 (HarmanKardon).
When i start PC when amplituner is turned on all works well.
But when it starts on powered off amplituner i cannot get the screen to work afterwards.
How can i force (fake) detection of connected amplituner to HDMI port?
lubuntu 12.10 - forgot to mention that
Bookmarks