Extremely slow Internet Connection Ubuntu 9.10 Dell Inspiron 1100
Hello once again everyone, I'm very new to Ubuntu in general and I just got my internet working through the wireless card with some help. However, my downloading speeds are beyond extremely slow. While I type on this computer, I am downloading things @ ~500-700kb/s, but when I try to download the package updates etc for my Ubuntu 9.10 laptop, It downloads @ ~ 4k b/s- which is UNBEARABLY slow, putting me at 14h left to complete a 200 mb update. Could anybody give me a hand here?
Dell Inspiron 1100
Ubuntu 9.10
$ lspci
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 02)
02:01.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
02:04.0 CardBus bridge: Texas Instruments PCI1510 PC card Cardbus Controller
03:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0d:56:af:b9:ea
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:7
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:240 (240.0 B) TX bytes:240 (240.0 B)
wlan0 Link encap:Ethernet HWaddr 00:14:bf:49:7f:b7
inet addr:192.168.1.105 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::214:bfff:fe49:7fb7/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5199 errors:0 dropped:0 overruns:0 frame:0
TX packets:4678 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7005315 (7.0 MB) TX bytes:407169 (407.1 KB)
wmaster0 Link encap:UNSPEC HWaddr 00-14-BF-49-7F-B7-34-39-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:"linksys"
Mode:Managed Frequency:2.462 GHz Access Point: 00:14:BF:7C:C6:39
Bit Rate=54 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=40/70 Signal level=-70 dBm Noise level=-70 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
$ lsmod
Module Size Used by
nls_iso8859_1 3740 1
nls_cp437 5372 1
vfat 10716 1
fat 51452 1 vfat
nls_utf8 1568 1
isofs 31620 1
usb_storage 52544 2
binfmt_misc 8356 1
ppdev 6688 0
iptable_filter 3100 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
arc4 1660 2
ecb 2524 2
b43 122136 0
mac80211 181236 1 b43
cfg80211 93052 2 b43,mac80211
snd_intel8x0 30168 2
led_class 4096 1 b43
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
snd_seq_midi 6432 0
dell_wmi 2564 0
snd_rawmidi 22208 1 snd_seq_midi
pcmcia 36808 0
joydev 10272 0
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 22276 2 snd_pcm,snd_seq
yenta_socket 24200 2
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
rsrc_nonstatic 11644 1 yenta_socket
snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device
psmouse 56180 0
lp 8964 0
pcmcia_core 35792 3 pcmcia,yenta_socket,rsrc_nonstatic
dcdbas 7292 0
serio_raw 5280 0
soundcore 7264 1 snd
parport 35340 2 ppdev,lp
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
shpchp 32272 0
fbcon 36640 72
tileblit 2460 1 fbcon
font 8124 1 fbcon
bitblit 5372 1 fbcon
softcursor 1756 1 bitblit
b44 28684 0
ssb 35300 2 b43,b44
mii 5212 1 b44
i915 221064 2
drm 159584 2 i915
i2c_algo_bit 5760 1 i915
intel_agp 27484 2 i915
agpgart 34988 2 drm,intel_agp
video 19380 1 i915
output 2780 1 video
$ dmesg
[ 0.164429] system 00:0b: ioport range 0x5bc0-0x5bdf has been reserved
[ 0.164435] system 00:0b: ioport range 0x5fb0-0x5fbb has been reserved
[ 0.164442] system 00:0b: ioport range 0x5fc0-0x5fdf has been reserved
[ 0.164449] system 00:0b: ioport range 0x63b0-0x63bb has been reserved
[ 0.164455] system 00:0b: ioport range 0x63c0-0x63df has been reserved
[ 0.164462] system 00:0b: ioport range 0x67b0-0x67bb has been reserved
[ 0.164468] system 00:0b: ioport range 0x67c0-0x67df has been reserved
[ 0.164475] system 00:0b: ioport range 0x6bb0-0x6bbb has been reserved
[ 0.164481] system 00:0b: ioport range 0x6bc0-0x6bdf has been reserved
[ 0.164488] system 00:0b: ioport range 0x6fb0-0x6fbb has been reserved
[ 0.164494] system 00:0b: ioport range 0x6fc0-0x6fdf has been reserved
[ 0.164501] system 00:0b: ioport range 0x73b0-0x73bb has been reserved
[ 0.164508] system 00:0b: ioport range 0x73c0-0x73df has been reserved
[ 0.164515] system 00:0b: ioport range 0x77b0-0x77bb has been reserved
[ 0.164521] system 00:0b: ioport range 0x77c0-0x77df has been reserved
[ 0.164528] system 00:0b: ioport range 0x7bb0-0x7bbb has been reserved
[ 0.164535] system 00:0b: ioport range 0x7bc0-0x7bdf has been reserved
[ 0.164541] system 00:0b: ioport range 0x7fb0-0x7fbb has been reserved
[ 0.164548] system 00:0b: ioport range 0x7fc0-0x7fdf has been reserved
[ 0.164555] system 00:0b: ioport range 0x83b0-0x83bb has been reserved
[ 0.164562] system 00:0b: ioport range 0x83c0-0x83df has been reserved
[ 0.164569] system 00:0b: ioport range 0x87b0-0x87bb has been reserved
[ 0.164577] system 00:0b: ioport range 0x87c0-0x87df has been reserved
[ 0.164584] system 00:0b: ioport range 0x8bb0-0x8bbb has been reserved
[ 0.164591] system 00:0b: ioport range 0x8bc0-0x8bdf has been reserved
[ 0.164599] system 00:0b: ioport range 0x8fb0-0x8fbb has been reserved
[ 0.164607] system 00:0b: ioport range 0x8fc0-0x8fdf has been reserved
[ 0.164615] system 00:0b: ioport range 0x93b0-0x93bb has been reserved
[ 0.164622] system 00:0b: ioport range 0x93c0-0x93df has been reserved
[ 0.164630] system 00:0b: ioport range 0x97b0-0x97bb has been reserved
[ 0.164638] system 00:0b: ioport range 0x97c0-0x97df has been reserved
[ 0.164645] system 00:0b: ioport range 0x9bb0-0x9bbb has been reserved
[ 0.164653] system 00:0b: ioport range 0x9bc0-0x9bdf has been reserved
[ 0.164661] system 00:0b: ioport range 0x9fb0-0x9fbb has been reserved
[ 0.164668] system 00:0b: ioport range 0x9fc0-0x9fdf has been reserved
[ 0.164676] system 00:0b: ioport range 0xa3b0-0xa3bb has been reserved
[ 0.164683] system 00:0b: ioport range 0xa3c0-0xa3df has been reserved
[ 0.164691] system 00:0b: ioport range 0xa7b0-0xa7bb has been reserved
[ 0.164699] system 00:0b: ioport range 0xa7c0-0xa7df has been reserved
[ 0.164707] system 00:0b: ioport range 0xabb0-0xabbb has been reserved
[ 0.164715] system 00:0b: ioport range 0xabc0-0xabdf has been reserved
[ 0.164722] system 00:0b: ioport range 0xafb0-0xafbb has been reserved
[ 0.164730] system 00:0b: ioport range 0xafc0-0xafdf has been reserved
[ 0.164738] system 00:0b: ioport range 0xb3b0-0xb3bb has been reserved
[ 0.164746] system 00:0b: ioport range 0xb3c0-0xb3df has been reserved
[ 0.164754] system 00:0b: ioport range 0xb7b0-0xb7bb has been reserved
[ 0.164763] system 00:0b: ioport range 0xb7c0-0xb7df has been reserved
[ 0.164771] system 00:0b: ioport range 0xbbb0-0xbbbb has been reserved
[ 0.164779] system 00:0b: ioport range 0xbbc0-0xbbdf has been reserved
[ 0.164787] system 00:0b: ioport range 0xbfb0-0xbfbb has been reserved
[ 0.164796] system 00:0b: ioport range 0xbfc0-0xbfdf has been reserved
[ 0.164804] system 00:0b: ioport range 0xc3b0-0xc3bb has been reserved
[ 0.164812] system 00:0b: ioport range 0xc3c0-0xc3df has been reserved
[ 0.164821] system 00:0b: ioport range 0xc7b0-0xc7bb has been reserved
[ 0.164829] system 00:0b: ioport range 0xc7c0-0xc7df has been reserved
[ 0.164837] system 00:0b: ioport range 0xcbb0-0xcbbb has been reserved
[ 0.164846] system 00:0b: ioport range 0xcbc0-0xcbdf has been reserved
[ 0.164854] system 00:0b: ioport range 0xcfb0-0xcfbb has been reserved
[ 0.164863] system 00:0b: ioport range 0xcfc0-0xcfdf has been reserved
[ 0.164883] system 00:0b: ioport range 0xf3b0-0xf3bb has been reserved
[ 0.164892] system 00:0b: ioport range 0xf3c0-0xf3df has been reserved
[ 0.164901] system 00:0b: ioport range 0xf7b0-0xf7bb has been reserved
[ 0.164910] system 00:0b: ioport range 0xf7c0-0xf7df has been reserved
[ 0.164921] system 00:0b: ioport range 0xfbb0-0xfbbb has been reserved
[ 0.164930] system 00:0b: ioport range 0xfbc0-0xfbdf has been reserved
[ 0.164939] system 00:0b: ioport range 0xffb0-0xffbb has been reserved
[ 0.164948] system 00:0b: ioport range 0xffc0-0xffdf has been reserved
[ 0.199886] AppArmor: AppArmor Filesystem Enabled
[ 0.199949] pci 0000:02:04.0: CardBus bridge, secondary bus 0000:03
[ 0.199954] pci 0000:02:04.0: IO window: 0x00d000-0x00d0ff
[ 0.199962] pci 0000:02:04.0: IO window: 0x00d400-0x00d4ff
[ 0.199969] pci 0000:02:04.0: PREFETCH window: 0x10000000-0x13ffffff
[ 0.199977] pci 0000:02:04.0: MEM window: 0xf8000000-0xfbffffff
[ 0.199984] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.200018] pci 0000:00:1e.0: IO window: 0xd000-0xefff
[ 0.200027] pci 0000:00:1e.0: MEM window: 0xf8000000-0xfdffffff
[ 0.200035] pci 0000:00:1e.0: PREFETCH window: 0x10000000-0x13ffffff
[ 0.200058] pci 0000:00:1e.0: setting latency timer to 64
[ 0.200071] pci 0000:02:04.0: enabling device (0000 -> 0003)
[ 0.200383] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.200390] PCI: setting IRQ 11 as level-triggered
[ 0.200398] pci 0000:02:04.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.200413] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.200418] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.200424] pci_bus 0000:02: resource 0 io: [0xd000-0xefff]
[ 0.200429] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfdffffff]
[ 0.200434] pci_bus 0000:02: resource 2 pref mem [0x10000000-0x13ffffff]
[ 0.200439] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.200444] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.200450] pci_bus 0000:03: resource 0 io: [0xd000-0xd0ff]
[ 0.200454] pci_bus 0000:03: resource 1 io: [0xd400-0xd4ff]
[ 0.200459] pci_bus 0000:03: resource 2 pref mem [0x10000000-0x13ffffff]
[ 0.200464] pci_bus 0000:03: resource 3 mem: [0xf8000000-0xfbffffff]
[ 0.200526] NET: Registered protocol family 2
[ 0.200686] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.201132] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.201203] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.201276] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.201283] TCP reno registered
[ 0.201522] NET: Registered protocol family 1
[ 0.201662] Trying to unpack rootfs image as initramfs...
[ 0.540777] Freeing initrd memory: 7463k freed
[ 0.556085] cpufreq-nforce2: No nForce2 chipset.
[ 0.556140] Scanning for low memory corruption every 60 seconds
[ 0.556354] audit: initializing netlink socket (disabled)
[ 0.556384] type=2000 audit(1267545051.556:1): initialized
[ 0.566436] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.568982] VFS: Disk quotas dquot_6.5.2
[ 0.569121] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.570400] fuse init (API version 7.12)
[ 0.570620] msgmni has been set to 486
[ 0.571206] alg: No test for stdrng (krng)
[ 0.571260] io scheduler noop registered
[ 0.571265] io scheduler anticipatory registered
[ 0.571269] io scheduler deadline registered
[ 0.571402] io scheduler cfq registered (default)
[ 0.571431] pci 0000:00:02.0: Boot video device
[ 0.571698] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.571751] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.572371] ACPI: AC Adapter [AC] (on-line)
[ 0.572530] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.572945] ACPI: Lid Switch [LID]
[ 0.573049] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.573060] ACPI: Power Button [PBTN]
[ 0.573146] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.573153] ACPI: Sleep Button [SBTN]
[ 0.573710] processor LNXCPU:00: registered as cooling_device0
[ 0.573719] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.579803] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.579825] ACPI: Thermal Zone [THM] (25 C)
[ 0.604184] isapnp: Scanning for PnP cards...
[ 0.700044] Switched to high resolution mode on CPU 0
[ 0.923871] ACPI: Battery Slot [BAT0] (battery present)
[ 0.967500] isapnp: No Plug & Play device found
[ 0.970663] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.971608] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 7
[ 0.971616] PCI: setting IRQ 7 as level-triggered
[ 0.971624] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 0.971636] serial 0000:00:1f.6: PCI INT B disabled
[ 0.973708] brd: module loaded
[ 0.974804] loop: module loaded
[ 0.975029] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.975281] ata_piix 0000:00:1f.1: version 2.13
[ 0.975303] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.975317] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.975398] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.975591] scsi0 : ata_piix
[ 0.975861] scsi1 : ata_piix
[ 0.976218] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 0.976225] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 0.978396] Fixed MDIO Bus: probed
[ 0.978487] PPP generic driver version 2.4.2
[ 0.978748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.979121] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.979131] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.979162] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.979168] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.979345] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.983286] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.983297] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.983722] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf6f7fc00
[ 0.996043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.996246] usb usb1: configuration #1 chosen from 1 choice
[ 0.996324] hub 1-0:1.0: USB hub found
[ 0.996352] hub 1-0:1.0: 6 ports detected
[ 0.996531] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.996593] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.996694] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.996715] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.996722] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.996845] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.996888] uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
[ 0.997079] usb usb2: configuration #1 chosen from 1 choice
[ 0.997172] hub 2-0:1.0: USB hub found
[ 0.997205] hub 2-0:1.0: 2 ports detected
[ 0.997674] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.997683] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.997703] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.997710] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.997856] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.997899] uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000bf40
[ 0.998103] usb usb3: configuration #1 chosen from 1 choice
[ 0.998181] hub 3-0:1.0: USB hub found
[ 0.998208] hub 3-0:1.0: 2 ports detected
[ 0.998670] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.998679] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.998699] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.998706] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.998837] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.998881] uhci_hcd 0000:00:1d.2: irq 11, io base 0x0000bf20
[ 0.999075] usb usb4: configuration #1 chosen from 1 choice
[ 0.999161] hub 4-0:1.0: USB hub found
[ 0.999193] hub 4-0:1.0: 2 ports detected
[ 0.999437] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.999618] i8042.c: Warning: Keylock active.
[ 1.002175] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.002190] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.002397] mice: PS/2 mouse device common for all mice
[ 1.002798] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.002829] rtc0: alarms up to one day, 114 bytes nvram
[ 1.003090] device-mapper: uevent: version 1.0.3
[ 1.003394] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.003716] device-mapper: multipath: version 1.1.0 loaded
[ 1.003724] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.004212] EISA: Probing bus 0 at eisa.0
[ 1.004247] EISA: Detected 0 cards.
[ 1.004448] cpuidle: using governor ladder
[ 1.004453] cpuidle: using governor menu
[ 1.005307] TCP cubic registered
[ 1.005602] NET: Registered protocol family 10
[ 1.006351] lo: Disabled Privacy Extensions
[ 1.006800] NET: Registered protocol family 17
[ 1.006866] Bluetooth: L2CAP ver 2.13
[ 1.006870] Bluetooth: L2CAP socket layer initialized
[ 1.006876] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.006879] Bluetooth: SCO socket layer initialized
[ 1.007045] Bluetooth: RFCOMM TTY layer initialized
[ 1.007054] Bluetooth: RFCOMM socket layer initialized
[ 1.007058] Bluetooth: RFCOMM ver 1.11
[ 1.007128] Using IPI No-Shortcut mode
[ 1.007316] PM: Resume from disk failed.
[ 1.007356] registered taskstats version 1
[ 1.007542] Magic number: 2:508:840
[ 1.007670] rtc_cmos 00:06: setting system clock to 2010-03-02 15:50:52 UTC (1267545052)
[ 1.007678] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.007681] EDD information not available.
[ 1.008193] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.100059] hub 2-0:1.0: over-current change on port 1
[ 1.144705] ata2.00: ATA-6: IC25N020ATMR04-0, MO1OAD0A, max UDMA/100
[ 1.144711] ata2.00: 39070080 sectors, multi 8: LBA48
[ 1.160491] ata1.00: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4240N, E112, max UDMA/33
[ 1.160956] ata2.00: configured for UDMA/100
[ 1.176255] ata1.00: configured for UDMA/33
[ 1.181262] scsi 0:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4240N E112 PQ: 0 ANSI: 5
[ 1.192393] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.192402] Uniform CD-ROM driver Revision: 3.20
[ 1.192591] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.192733] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.193007] scsi 1:0:0:0: Direct-Access ATA IC25N020ATMR04-0 MO1O PQ: 0 ANSI: 5
[ 1.193293] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.193457] sd 1:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 1.193693] sd 1:0:0:0: [sda] Write Protect is off
[ 1.193700] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.193820] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.194399] sda: sda1 sda2 < sda5 >
[ 1.261013] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.261046] Freeing unused kernel memory: 540k freed
[ 1.262056] Write protecting the kernel text: 4568k
[ 1.262097] Write protecting the kernel read-only data: 1836k
[ 1.659642] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:20/input/input5
[ 1.659732] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 1.721173] Linux agpgart interface v0.103
[ 1.726356] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 1.726531] agpgart-intel 0000:00:00.0: detected 892K stolen memory
[ 1.729108] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
[ 2.001232] [drm] Initialized drm 1.1.0 20060810
[ 2.027757] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 2.027769] i915 0000:00:02.0: setting latency timer to 64
[ 2.058603] b44 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 2.173742] [drm] DAC-5: set mode 640x480 0
[ 2.637165] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[ 2.637228] b44.c:v2.0
[ 2.646163] i2c-adapter i2c-1: unable to read EDID block.
[ 2.646175] i915 0000:00:02.0: LVDS-1: no EDID data
[ 2.655748] [drm] fb0: inteldrmfb frame buffer device
[ 2.655769] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.657122] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0d:56:af:b9:ea
[ 2.799688] render error detected, EIR: 0x00000010
[ 2.799696] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking
[ 2.799710] render error detected, EIR: 0x00000010
[ 2.806718] [drm] LVDS-7: set mode 1024x768 a
[ 2.972789] Console: switching to colour frame buffer device 128x48
[ 3.425193] PM: Starting manual resume from disk
[ 3.425203] PM: Resume from partition 8:5
[ 3.425206] PM: Checking hibernation image.
[ 3.425485] PM: Resume from disk failed.
[ 3.466578] EXT4-fs (sda1): barriers enabled
[ 3.483326] kjournald2 starting: pid 316, dev sda1:8, commit interval 5 seconds
[ 3.483367] EXT4-fs (sda1): delayed allocation enabled
[ 3.483373] EXT4-fs: file extents enabled
[ 3.486047] EXT4-fs: mballoc enabled
[ 3.486091] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 4.607548] type=1505 audit(1267545056.098:2): operation="profile_load" pid=339 name=/usr/share/gdm/guest-session/Xsession
[ 4.613255] type=1505 audit(1267545056.104:3): operation="profile_load" pid=340 name=/sbin/dhclient3
[ 4.614035] type=1505 audit(1267545056.104:4): operation="profile_load" pid=340 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 4.614493] type=1505 audit(1267545056.104:5): operation="profile_load" pid=340 name=/usr/lib/connman/scripts/dhclient-script
[ 4.680407] type=1505 audit(1267545056.172:6): operation="profile_load" pid=341 name=/usr/bin/evince
[ 4.692627] type=1505 audit(1267545056.184:7): operation="profile_load" pid=341 name=/usr/bin/evince-previewer
[ 4.699847] type=1505 audit(1267545056.188:8): operation="profile_load" pid=341 name=/usr/bin/evince-thumbnailer
[ 4.731984] type=1505 audit(1267545056.220:9): operation="profile_load" pid=343 name=/usr/lib/cups/backend/cups-pdf
[ 4.733026] type=1505 audit(1267545056.224:10): operation="profile_load" pid=343 name=/usr/sbin/cupsd
[ 6.540538] Adding 730916k swap on /dev/sda5. Priority:-1 extents:1 across:730916k
[ 6.733468] udev: starting version 147
[ 7.006132] EXT4-fs (sda1): internal journal on sda1:8
[ 7.488449] intel_rng: FWH not detected
[ 7.541585] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.755285] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 7.855374] lp: driver loaded but no devices found
[ 9.970816] yenta_cardbus 0000:02:04.0: CardBus bridge found [1028:0149]
[ 9.970841] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 9.970846] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 9.970854] yenta_cardbus 0000:02:04.0: TI: mfunc 0x00001002, devctl 0x64
[ 10.176102] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x254ab1, caps: 0x804713/0x0
[ 10.200691] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0478, PCI irq 11
[ 10.200699] yenta_cardbus 0000:02:04.0: Socket status: 30000020
[ 10.200706] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #02 to #06
[ 10.200724] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge I/O window: 0xd000 - 0xefff
[ 10.200731] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xefff: clean.
[ 10.201800] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0xf8000000 - 0xfdffffff
[ 10.201806] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge Memory window: 0x10000000 - 0x13ffffff
[ 10.229278] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[ 10.328794] dell-wmi: No known WMI GUID found
[ 10.848356] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 10.848401] pci 0000:03:00.0: reg 10 32bit mmio: [0x000000-0x001fff]
[ 10.848660] b43-pci-bridge 0000:03:00.0: enabling device (0000 -> 0002)
[ 10.848681] b43-pci-bridge 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 10.848698] b43-pci-bridge 0000:03:00.0: setting latency timer to 64
[ 10.912187] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[ 11.090936] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 11.092330] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 11.092934] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.093098] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.094072] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 11.117123] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 7 (level, low) -> IRQ 7
[ 11.117195] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 11.173291] cfg80211: Calling CRDA to update world regulatory domain
[ 11.350658] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 11.594875] cfg80211: World regulatory domain updated:
[ 11.594885] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.594891] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.594896] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.594901] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.594906] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.594910] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.661005] phy0: Selected rate control algorithm 'minstrel'
[ 11.662229] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 11.944101] intel8x0_measure_ac97_clock: measured 55154 usecs (2657 samples)
[ 11.944108] intel8x0: clocking to 48000
[ 13.396213] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.236470] __ratelimit: 3 callbacks suppressed
[ 14.236477] type=1505 audit(1267566665.728:12): operation="profile_replace" pid=736 name=/usr/share/gdm/guest-session/Xsession
[ 14.241459] type=1505 audit(1267566665.732:13): operation="profile_replace" pid=737 name=/sbin/dhclient3
[ 14.242262] type=1505 audit(1267566665.732:14): operation="profile_replace" pid=737 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.242719] type=1505 audit(1267566665.732:15): operation="profile_replace" pid=737 name=/usr/lib/connman/scripts/dhclient-script
[ 14.259685] type=1505 audit(1267566665.748:16): operation="profile_replace" pid=738 name=/usr/bin/evince
[ 14.273074] type=1505 audit(1267566665.764:17): operation="profile_replace" pid=738 name=/usr/bin/evince-previewer
[ 14.281351] type=1505 audit(1267566665.772:18): operation="profile_replace" pid=738 name=/usr/bin/evince-thumbnailer
[ 14.296568] type=1505 audit(1267566665.788:19): operation="profile_replace" pid=740 name=/usr/lib/cups/backend/cups-pdf
[ 14.297547] type=1505 audit(1267566665.788:20): operation="profile_replace" pid=740 name=/usr/sbin/cupsd
[ 14.302898] type=1505 audit(1267566665.792:21): operation="profile_replace" pid=741 name=/usr/sbin/tcpdump
[ 18.055753] ppdev: user-space parallel port driver
[ 19.015721] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.104125] b43 ssb1:0: firmware: requesting b43/ucode5.fw
[ 19.570286] b43 ssb1:0: firmware: requesting b43/pcm5.fw
[ 19.735404] b43 ssb1:0: firmware: requesting b43/b0g0initvals5.fw
[ 20.265540] b43 ssb1:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 20.396060] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 20.448476] Registered led device: b43-phy0::tx
[ 20.448543] Registered led device: b43-phy0::rx
[ 20.448593] Registered led device: b43-phy0::radio
[ 20.449029] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.326940] i2c-adapter i2c-0: unable to read EDID block.
[ 22.326950] i915 0000:00:02.0: VGA-1: no EDID data
[ 22.336671] i2c-adapter i2c-0: unable to read EDID block.
[ 22.336681] i915 0000:00:02.0: VGA-1: no EDID data
[ 22.342791] i2c-adapter i2c-1: unable to read EDID block.
[ 22.342801] i915 0000:00:02.0: LVDS-1: no EDID data
[ 22.357172] i2c-adapter i2c-0: unable to read EDID block.
[ 22.357185] i915 0000:00:02.0: VGA-1: no EDID data
[ 22.378254] i2c-adapter i2c-0: unable to read EDID block.
[ 22.378266] i915 0000:00:02.0: VGA-1: no EDID data
[ 22.441008] i2c-adapter i2c-1: unable to read EDID block.
[ 22.441018] i915 0000:00:02.0: LVDS-1: no EDID data
[ 27.550769] i2c-adapter i2c-0: unable to read EDID block.
[ 27.550781] i915 0000:00:02.0: VGA-1: no EDID data
[ 27.561661] i2c-adapter i2c-0: unable to read EDID block.
[ 27.561671] i915 0000:00:02.0: VGA-1: no EDID data
[ 27.573321] i2c-adapter i2c-1: unable to read EDID block.
[ 27.573329] i915 0000:00:02.0: LVDS-1: no EDID data
[ 27.592710] i2c-adapter i2c-0: unable to read EDID block.
[ 27.592720] i915 0000:00:02.0: VGA-1: no EDID data
[ 27.605389] i2c-adapter i2c-0: unable to read EDID block.
[ 27.605401] i915 0000:00:02.0: VGA-1: no EDID data
[ 27.613447] i2c-adapter i2c-1: unable to read EDID block.
[ 27.613459] i915 0000:00:02.0: LVDS-1: no EDID data
[ 27.665991] i2c-adapter i2c-0: unable to read EDID block.
[ 27.666003] i915 0000:00:02.0: VGA-1: no EDID data
[ 27.675947] i2c-adapter i2c-0: unable to read EDID block.
[ 27.675958] i915 0000:00:02.0: VGA-1: no EDID data
[ 27.684390] i2c-adapter i2c-1: unable to read EDID block.
[ 27.684400] i915 0000:00:02.0: LVDS-1: no EDID data
[ 50.926966] i2c-adapter i2c-0: unable to read EDID block.
[ 50.926978] i915 0000:00:02.0: VGA-1: no EDID data
[ 50.936781] i2c-adapter i2c-0: unable to read EDID block.
[ 50.936790] i915 0000:00:02.0: VGA-1: no EDID data
[ 50.944590] i2c-adapter i2c-1: unable to read EDID block.
[ 50.944602] i915 0000:00:02.0: LVDS-1: no EDID data
[ 50.979026] i2c-adapter i2c-0: unable to read EDID block.
[ 50.979037] i915 0000:00:02.0: VGA-1: no EDID data
[ 51.006386] i2c-adapter i2c-0: unable to read EDID block.
[ 51.006397] i915 0000:00:02.0: VGA-1: no EDID data
[ 51.022841] i2c-adapter i2c-1: unable to read EDID block.
[ 51.022852] i915 0000:00:02.0: LVDS-1: no EDID data
[ 51.071653] i2c-adapter i2c-0: unable to read EDID block.
[ 51.071665] i915 0000:00:02.0: VGA-1: no EDID data
[ 51.089288] i2c-adapter i2c-0: unable to read EDID block.
[ 51.089301] i915 0000:00:02.0: VGA-1: no EDID data
[ 51.109171] i2c-adapter i2c-1: unable to read EDID block.
[ 51.109183] i915 0000:00:02.0: LVDS-1: no EDID data
[ 240.905947] wlan0: authenticate with AP 00:14:bf:7c:c6:39
[ 240.908847] wlan0: authenticated
[ 240.908856] wlan0: associate with AP 00:14:bf:7c:c6:39
[ 240.916940] wlan0: RX AssocResp from 00:14:bf:7c:c6:39 (capab=0x401 status=0 aid=4)
[ 240.916949] wlan0: associated
[ 240.918084] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 251.280046] wlan0: no IPv6 routers present
[ 1415.896080] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 1416.044602] usb 1-3: configuration #1 chosen from 1 choice
[ 1416.835388] Initializing USB Mass Storage driver...
[ 1416.837024] scsi2 : SCSI emulation for USB Mass Storage devices
[ 1416.837617] usbcore: registered new interface driver usb-storage
[ 1416.837631] USB Mass Storage support registered.
[ 1416.839335] usb-storage: device found at 2
[ 1416.839342] usb-storage: waiting for device to settle before scanning
[ 1421.848179] usb-storage: device scan complete
[ 1421.853342] scsi 2:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS
[ 1421.854470] scsi 2:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0
[ 1421.856262] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1421.890000] sd 2:0:0:0: [sdb] 3915775 512-byte logical blocks: (2.00 GB/1.86 GiB)
[ 1421.893853] sd 2:0:0:0: [sdb] Write Protect is off
[ 1421.893862] sd 2:0:0:0: [sdb] Mode Sense: 45 00 00 08
[ 1421.893867] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1421.894657] sr1: scsi3-mmc drive: 48x/48x tray
[ 1421.894998] sr 2:0:0:1: Attached scsi CD-ROM sr1
[ 1421.895201] sr 2:0:0:1: Attached scsi generic sg3 type 5
[ 1421.912216] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1421.912231] sdb: sdb1
[ 1421.929730] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 1421.929745] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 1424.062105] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 1424.183289] ISOFS: changing to secondary root
$ sudo lshw -C network
*-network
description: Ethernet interface
product: BCM4401 100Base-T
vendor: Broadcom Corporation
physical id: 1
bus info: pci@0000:02:01.0
logical name: eth0
version: 01
serial: 00:0d:56:af:b9:ea
size: 10MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=half latency=32 link=no multicast=yes port=twisted pair speed=10MB/s
resources: irq:7 memory:fcffe000-fcffffff
*-network
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 1
bus info: pci@0000:03:00.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=64
resources: irq:11 memory:f8000000-f8001fff
*-network
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:14:bf:49:7f:b7
capabilities: ethernet physical wireless
configuration: broadcast=yes ip=192.168.1.105 multicast=yes wireless=IEEE 802.11bg
$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
wlan0 Scan completed :
Cell 01 - Address: 00:14:BF:7C:C6:39
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=38/70 Signal level=-72 dBm
Encryption key:off
ESSID:"linksys"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=00000074baea9354
Extra: Last beacon: 51276ms ago
IE: Unknown: 00076C696E6B737973
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0104
IE: Unknown: 2F0104
IE: Unknown: 32040C121860
IE: Unknown: DD060010180200F0
$ uname -mr
2.6.31-14-generic i686
-Thanks, Ubuntu noobzor
Adv Reply
Originally Posted by Ghost|BTFH
Bookmarks