Results 1 to 10 of 10

Thread: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

  1. #1
    Join Date
    May 2007
    Location
    Santa Fe, Argentina
    Beans
    518
    Distro
    Ubuntu 11.04 Natty Narwhal

    [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Como puedo obtener el sonido 5.1 en Hardy Heron? Tengo una motherboard Asus M2N-VM DVI con chipset nForce 630a. He googleado, pero o no he comprendido qué hacer, o simplemente no funciona. No sé como manejar lo de ALSA ni de lo de PulseAudio. Ya me quedé sin ideas...

    Les emito la siguiente info y cualquier otro dato, me lo piden:

    lspci
    00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
    00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
    00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
    00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
    00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
    00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
    00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
    00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
    00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
    00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
    00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
    00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
    00:0b.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0e.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:0f.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:10.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:11.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
    00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    01:06.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
    01:07.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
    01:07.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
    02:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1)


    lsmod
    Module Size Used by
    binfmt_misc 12808 1
    tun 12672 0
    vboxdrv 76736 0
    powernow_k8 16704 1
    cpufreq_ondemand 9740 1
    cpufreq_conservative 8712 0
    cpufreq_userspace 5284 0
    cpufreq_stats 7104 0
    freq_table 5536 3 powernow_k8,cpufreq_ondemand,cpufreq_stats
    cpufreq_powersave 2688 0
    video 19856 0
    output 4736 1 video
    container 5632 0
    dock 11280 0
    sbs 15112 0
    sbshc 7680 1 sbs
    battery 14212 0
    xt_TCPMSS 5504 1
    xt_limit 3584 8
    xt_tcpudp 4096 30
    nf_nat_irc 3712 0
    nf_nat_ftp 4352 0
    ipt_LOG 7296 8
    ipt_MASQUERADE 4608 1
    ipt_TOS 3200 0
    ipt_REJECT 5632 1
    nf_conntrack_irc 7576 1 nf_nat_irc
    nf_conntrack_ftp 10144 1 nf_nat_ftp
    xt_state 3328 8
    ac 6916 0
    it87 20876 0
    hwmon_vid 4352 1 it87
    lp 12324 0
    af_packet 23812 2
    ipv6 267780 22
    bt878 11832 0
    tuner 42912 0
    tea5767 6788 1 tuner
    tda8290 12420 1 tuner
    tuner_simple 10248 1 tuner
    mt20xx 13192 1 tuner
    tea5761 6020 1 tuner
    serio_raw 7940 0
    bttv 175860 1 bt878
    parport_pc 36260 1
    ir_common 36100 1 bttv
    parport 37832 2 lp,parport_pc
    psmouse 40336 0
    pcspkr 4224 0
    evdev 13056 3
    compat_ioctl32 2304 1 bttv
    i2c_algo_bit 7300 1 bttv
    nvidia 6896812 30
    k8temp 6656 0
    gspca 643920 0
    videobuf_dma_sg 14980 1 bttv
    videobuf_core 18820 2 bttv,videobuf_dma_sg
    btcx_risc 5896 1 bttv
    tveeprom 16656 1 bttv
    i2c_core 24832 10 tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761, bttv,i2c_algo_bit,nvidia,tveeprom
    agpgart 34760 1 nvidia
    videodev 29440 2 bttv,gspca
    v4l2_common 18304 3 tuner,bttv,videodev
    wmi_acer 9644 0
    v4l1_compat 15492 2 bttv,videodev
    snd_hda_intel 344856 3
    snd_pcm_oss 42144 0
    snd_mixer_oss 17920 1 snd_pcm_oss
    snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
    snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
    snd_hwdep 10500 1 snd_hda_intel
    snd_seq_dummy 4868 0
    snd_seq_oss 35584 0
    snd_seq_midi 9376 0
    snd_rawmidi 25760 1 snd_seq_midi
    snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
    button 9232 0
    snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
    snd_timer 24836 2 snd_pcm,snd_seq
    snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
    snd 56996 17 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,sn d_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_ seq,snd_timer,snd_seq_device
    shpchp 34452 0
    pci_hotplug 30880 1 shpchp
    soundcore 8800 1 snd
    iptable_nat 8324 1
    nf_nat 20396 4 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
    nf_conntrack_ipv4 19080 10 iptable_nat
    nf_conntrack 66752 9 nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,nf_conntrack_ irc,nf_conntrack_ftp,xt_state,iptable_nat,nf_nat,n f_conntrack_ipv4
    iptable_mangle 3712 0
    iptable_filter 3840 1
    ip_tables 14820 3 iptable_nat,iptable_mangle,iptable_filter
    x_tables 16132 10 xt_TCPMSS,xt_limit,xt_tcpudp,ipt_LOG,ipt_MASQUERAD E,ipt_TOS,ipt_REJECT,xt_state,iptable_nat,ip_table s
    ext3 136840 3
    jbd 48404 1 ext3
    mbcache 9600 1 ext3
    sg 36880 0
    sr_mod 17956 0
    cdrom 37408 1 sr_mod
    sd_mod 30720 7
    usb_storage 73664 0
    libusual 19108 1 usb_storage
    ahci 28548 6
    ata_generic 8324 0
    pata_amd 14212 0
    floppy 59588 0
    pata_acpi 8320 0
    libata 159344 4 ahci,ata_generic,pata_amd,pata_acpi
    tulip 53536 0
    forcedeth 51980 0
    scsi_mod 151436 5 sg,sr_mod,sd_mod,usb_storage,libata
    ehci_hcd 37900 0
    ohci_hcd 26640 0
    usbcore 146412 6 gspca,usb_storage,libusual,ehci_hcd,ohci_hcd
    thermal 16796 0
    processor 37384 2 powernow_k8,thermal
    fan 5636 0
    fbcon 42912 0
    tileblit 3456 1 fbcon
    font 9472 1 fbcon
    bitblit 6784 1 fbcon
    softcursor 3072 1 bitblit
    fuse 50708 7


    Como debo proceder para obtener el sonido 5.1 ? En ween, me funciona desde el arranque, todo OK, con los drivers, pero agradecería poder solucionarlo en Ubuntu!
    No, no estoy testeando con un mp3 de 2 canales, ni con un archivo de video con audio MP3.
    Algun gurú del sonido en GNU/Linux y/o Ubuntu ? Desde ya, muchisimas gracias
    << User21 / FreeDownload >>
    http://twitter.com/user21


  2. #2
    Join Date
    May 2007
    Location
    Santa Fe, Argentina
    Beans
    518
    Distro
    Ubuntu 11.04 Natty Narwhal

    Post Re: Necesito sonido 5.1 en Hardy (a como de lugar)

    Aparentemente, obtuve el sonido de 6 canales.
    No estoy muy seguro como lo hice, pero explico lo que hice! xD

    Mi tarjeta de sonido es, segun lspci : nVidia Corporation MCP67 High Definition Audio
    Pero se identifica en la info de la motherboard como Realtek ALC662 High Definition Audio 6-Channel CODEC con soporte S/PDIF y detección de JACKs.

    Me basé en este tutorial y en este otro. Este último parece haber dado la solución. Lo traduzco al español por si alguien lo necesita.

    Identifica tu codec:
    Code:
    aplay -l
    cat /proc/asound/card0/codec#* | grep Codec
    Yo obtuve las siguientes salidas.
    Code:
    **** Lista de PLAYBACK Dispositivos Hardware ****
    tarjeta 0: NVidia [HDA NVidia], dispositivo 0: ALC662 Analog [ALC662 Analog]
      Subdispositivos: 0/1
      Subdispositivo #0: subdevice #0
    tarjeta 0: NVidia [HDA NVidia], dispositivo 1: ALC662 Digital [ALC662 Digital]
      Subdispositivos: 1/1
      Subdispositivo #0: subdevice #0
    
    Codec: Realtek ALC662 rev1
    Ahora, edita /etc/modprobe.d/alsa-base con el siguiente comando:
    Code:
    gksudo gedit /etc/modprobe.d/alsa-base
    Modifica (o agrega) la siguiente linea con el modelname = apropiado, de la lista que se muestra debajo.
    Code:
    options snd-hda-intel model=modelname
    Lista de modelnames según tu CODEC:

    Code:
    Module snd-hda-intel
      --------------------
    
        Module for Intel HD Audio (ICH6, ICH6M, ESB2, ICH7, ICH8),
            ATI SB450, SB600, RS600,
            VIA VT8251/VT8237A,
            SIS966, ULI M5461
    
        [Multiple options for each card instance]
        model    - force the model name
        position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
        probe_mask  - Bitmask to probe codecs (default = -1, meaning all slots)
        bdl_pos_adj    - Specifies the DMA IRQ timing delay in samples.
            Passing -1 will make the driver to choose the appropriate
            value based on the controller chip.
        
        [Single (global) options]
        single_cmd  - Use single immediate commands to communicate with
            codecs (for debugging only)
        enable_msi    - Enable Message Signaled Interrupt (MSI) (default = off)
        power_save    - Automatic power-saving timtout (in second, 0 =
            disable)
        power_save_controller - Reset HD-audio controller in power-saving mode
            (default = on)
    
        This module supports multiple cards and autoprobe.
        
        Each codec may have a model table for different configurations.
        If your machine isn't listed there, the default (usually minimal)
        configuration is set up.  You can pass "model=<name>" option to
        specify a certain model in such a case.  There are different
        models depending on the codec chip.
    
          Model name    Description
          ----------    -----------
        ALC880
          3stack    3-jack in back and a headphone out
          3stack-digout    3-jack in back, a HP out and a SPDIF out
          5stack    5-jack in back, 2-jack in front
          5stack-digout    5-jack in back, 2-jack in front, a SPDIF out
          6stack    6-jack in back, 2-jack in front
          6stack-digout    6-jack with a SPDIF out
          w810        3-jack
          z71v        3-jack (HP shared SPDIF)
          asus        3-jack (ASUS Mobo)
          asus-w1v    ASUS W1V
          asus-dig    ASUS with SPDIF out
          asus-dig2    ASUS with SPDIF out (using GPIO2)
          uniwill    3-jack
          fujitsu    Fujitsu Laptops (Pi1536)
          F1734        2-jack
          lg        LG laptop (m1 express dual)
          lg-lw        LG LW20/LW25 laptop
          tcl        TCL S700
          clevo        Clevo laptops (m520G, m665n)
          medion    Medion Rim 2150
          test        for testing/debugging purpose, almost all controls can be
                adjusted.  Appearing only when compiled with
                $CONFIG_SND_DEBUG=y
          auto        auto-config reading BIOS (default)
    
        ALC260
          hp        HP machines
          hp-3013    HP machines (3013-variant)
          fujitsu    Fujitsu S7020
          acer        Acer TravelMate
          will        Will laptops (PB V7900)
          replacer    Replacer 672V
          basic        fixed pin assignment (old default model)
          test        for testing/debugging purpose, almost all controls can
                adjusted.  Appearing only when compiled with
                $CONFIG_SND_DEBUG=y
          auto        auto-config reading BIOS (default)
    
        ALC262
          fujitsu    Fujitsu Laptop
          hp-bpc    HP xw4400/6400/8400/9400 laptops
          hp-bpc-d7000    HP BPC D7000
          hp-tc-t5735    HP Thin Client T5735
          hp-rp5700    HP RP5700
          benq        Benq ED8
          benq-t31    Benq T31
          hippo        Hippo (ATI) with jack detection, Sony UX-90s
          hippo_1    Hippo (Benq) with jack detection
          sony-assamd    Sony ASSAMD
          ultra        Samsung Q1 Ultra Vista model
          lenovo-3000    Lenovo 3000 y410
          basic        fixed pin assignment w/o SPDIF
          auto        auto-config reading BIOS (default)
    
        ALC267/268
          quanta-il1    Quanta IL1 mini-notebook
          3stack    3-stack model
          toshiba    Toshiba A205
          acer        Acer laptops
          dell        Dell OEM laptops (Vostro 1200)
          zepto        Zepto laptops
          test        for testing/debugging purpose, almost all controls can
                adjusted.  Appearing only when compiled with
                $CONFIG_SND_DEBUG=y
          auto        auto-config reading BIOS (default)
    
        ALC269
          basic        Basic preset
    
        ALC662/663
          3stack-dig    3-stack (2-channel) with SPDIF
          3stack-6ch     3-stack (6-channel)
          3stack-6ch-dig 3-stack (6-channel) with SPDIF
          6stack-dig     6-stack with SPDIF
          lenovo-101e     Lenovo laptop
          eeepc-p701    ASUS Eeepc P701
          eeepc-ep20    ASUS Eeepc EP20
          m51va        ASUS M51VA
          g71v        ASUS G71V
          h13        ASUS H13
          g50v        ASUS G50V
          auto        auto-config reading BIOS (default)
    
        ALC882/885
          3stack-dig    3-jack with SPDIF I/O
          6stack-dig    6-jack digital with SPDIF I/O
          arima        Arima W820Di1
          targa        Targa T8, MSI-1049 T8
          asus-a7j    ASUS A7J
          asus-a7m    ASUS A7M
          macpro    MacPro support
          mbp3        Macbook Pro rev3
          imac24    iMac 24'' with jack detection
          w2jc        ASUS W2JC
          auto        auto-config reading BIOS (default)
    
        ALC883/888
          3stack-dig    3-jack with SPDIF I/O
          6stack-dig    6-jack digital with SPDIF I/O
          3stack-6ch    3-jack 6-channel
          3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
          6stack-dig-demo  6-jack digital for Intel demo board
          acer        Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
          acer-aspire    Acer Aspire 9810
          medion    Medion Laptops
          medion-md2    Medion MD2
          targa-dig    Targa/MSI
          targa-2ch-dig    Targs/MSI with 2-channel
          laptop-eapd   3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
          lenovo-101e    Lenovo 101E
          lenovo-nb0763    Lenovo NB0763
          lenovo-ms7195-dig Lenovo MS7195
          haier-w66    Haier W66
          3stack-hp    HP machines with 3stack (Lucknow, Samba boards)
          6stack-dell    Dell machines with 6stack (Inspiron 530)
          mitac        Mitac 8252D
          clevo-m720    Clevo M720 laptop series
          fujitsu-pi2515 Fujitsu AMILO Pi2515
          auto        auto-config reading BIOS (default)
    
        ALC861/660
          3stack    3-jack
          3stack-dig    3-jack with SPDIF I/O
          6stack-dig    6-jack with SPDIF I/O
          3stack-660    3-jack (for ALC660)
          uniwill-m31    Uniwill M31 laptop
          toshiba    Toshiba laptop support
          asus        Asus laptop support
          asus-laptop    ASUS F2/F3 laptops
          auto        auto-config reading BIOS (default)
    
        ALC861VD/660VD
          3stack    3-jack
          3stack-dig    3-jack with SPDIF OUT
          6stack-dig    6-jack with SPDIF OUT
          3stack-660    3-jack (for ALC660VD)
          3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
          lenovo    Lenovo 3000 C200 & ASUS X20SG, ASUS U1E
          dallas    Dallas laptops, Toshiba satellite L30-106
          hp        HP TX1000
          auto        auto-config reading BIOS (default)
    
        CMI9880
          minimal    3-jack in back
          min_fp    3-jack in back, 2-jack in front
          full        6-jack in back, 2-jack in front
          full_dig    6-jack in back, 2-jack in front, SPDIF I/O
          allout    5-jack in back, 2-jack in front, SPDIF out
          auto        auto-config reading BIOS (default)
    
        AD1882
          3stack    3-stack mode (default)
          6stack    6-stack mode
    
        AD1884A / AD1883 / AD1984A / AD1984B
          desktop    3-stack desktop (default)
          laptop    laptop with HP jack sensing
          mobile    mobile devices with HP jack sensing
          thinkpad    Lenovo Thinkpad X300
    
        AD1884
          N/A
    
        AD1981
          basic        3-jack (default)
          hp        HP nx6320
          thinkpad    Lenovo Thinkpad T60/X60/Z60
          toshiba    Toshiba U205
    
        AD1983
          N/A
    
        AD1984
          basic        default configuration
          thinkpad    Lenovo Thinkpad T61/X61
          dell        Dell T3400
    
        AD1986A
          6stack    6-jack, separate surrounds (default)
          3stack    3-stack, shared surrounds
          laptop    2-channel only (FSC V2060, Samsung M50)
          laptop-eapd    2-channel with EAPD (Samsung R65, ASUS A6J)
          laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
          ultra        2-channel with EAPD (Samsung Ultra tablet PC)
    
        AD1988/AD1988B/AD1989A/AD1989B
          6stack    6-jack
          6stack-dig    ditto with SPDIF
          3stack    3-jack
          3stack-dig    ditto with SPDIF
          laptop    3-jack with hp-jack automute
          laptop-dig    ditto with SPDIF
          auto        auto-config reading BIOS (default)
        
        Conexant 5045
          laptop-hpsense    Laptop with HP sense (old model laptop)
          laptop-micsense   Laptop with Mic sense (old model fujitsu)
          laptop-hpmicsense Laptop with HP and Mic senses
          benq        Benq R55E
          test        for testing/debugging purpose, almost all controls
                can be adjusted.  Appearing only when compiled with
                $CONFIG_SND_DEBUG=y
    
        Conexant 5047
          laptop    Basic Laptop config 
          laptop-hp    Laptop config for some HP models (subdevice 30A5)
          laptop-eapd    Laptop config with EAPD support
          test        for testing/debugging purpose, almost all controls
                can be adjusted.  Appearing only when compiled with
                $CONFIG_SND_DEBUG=y
    
        Conexant 5051
          laptop    Basic Laptop config (default)
          hp        HP Spartan laptop
    
        STAC9200
          ref        Reference board
          dell-d21    Dell (unknown)
          dell-d22    Dell (unknown)
          dell-d23    Dell (unknown)
          dell-m21    Dell Inspiron 630m, Dell Inspiron 640m
          dell-m22    Dell Latitude D620, Dell Latitude D820
          dell-m23    Dell XPS M1710, Dell Precision M90
          dell-m24    Dell Latitude 120L
          dell-m25    Dell Inspiron E1505n
          dell-m26    Dell Inspiron 1501
          dell-m27    Dell Inspiron E1705/9400
          gateway    Gateway laptops with EAPD control
          panasonic    Panasonic CF-74
    
        STAC9205/9254
          ref        Reference board
          dell-m42    Dell (unknown)
          dell-m43    Dell Precision
          dell-m44    Dell Inspiron
    
        STAC9220/9221
          ref        Reference board
          3stack    D945 3stack
          5stack    D945 5stack + SPDIF
          intel-mac-v1    Intel Mac Type 1
          intel-mac-v2    Intel Mac Type 2
          intel-mac-v3    Intel Mac Type 3
          intel-mac-v4    Intel Mac Type 4
          intel-mac-v5    Intel Mac Type 5
          macmini    Intel Mac Mini (equivalent with type 3)
          macbook    Intel Mac Book (eq. type 5)
          macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
          macbook-pro    Intel Mac Book Pro 2nd generation (eq. type 3)
          imac-intel    Intel iMac (eq. type 2)
          imac-intel-20    Intel iMac (newer version) (eq. type 3)
          dell-d81    Dell (unknown)
          dell-d82    Dell (unknown)
          dell-m81    Dell (unknown)
          dell-m82    Dell XPS M1210
    
        STAC9202/9250/9251
          ref        Reference board, base config
          m2-2        Some Gateway MX series laptops
          m6        Some Gateway NX series laptops
          pa6        Gateway NX860 series
    
        STAC9227/9228/9229/927x
          ref        Reference board
          3stack    D965 3stack
          5stack    D965 5stack + SPDIF
          dell-3stack    Dell Dimension E520
          dell-bios    Fixes with Dell BIOS setup
    
        STAC92HD71B*
          ref        Reference board
          dell-m4-1    Dell desktops
          dell-m4-2    Dell desktops
    
        STAC92HD73*
          ref        Reference board
          dell-m6    Dell desktops
    
        STAC9872
          vaio        Setup for VAIO FE550G/SZ110
          vaio-ar Setup for VAIO AR
    
        The model name "genric" is treated as a special case.  When this
        model is given, the driver uses the generic codec parser without
        "codec-patch".  It's sometimes good for testing and debugging.
    
        If the default configuration doesn't work and one of the above
        matches with your device, report it together with the PCI
        subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
        ML (see the section "Links and Addresses").
    
        power_save and power_save_controller options are for power-saving
        mode.  See powersave.txt for details.
    
        Note 2: If you get click noises on output, try the module option
            position_fix=1 or 2.  position_fix=1 will use the SD_LPIB
            register value without FIFO size correction as the current
            DMA pointer.  position_fix=2 will make the driver to use
            the position buffer instead of reading SD_LPIB register.
            (Usually SD_LPLIB register is more accurate than the
            position buffer.)
    
        NB: If you get many "azx_get_response timeout" messages at
        loading, it's likely a problem of interrupts (e.g. ACPI irq
        routing).  Try to boot with options like "pci=noacpi".  Also, you
        can try "single_cmd=1" module option.  This will switch the
        communication method between HDA controller and codecs to the
        single immediate commands instead of CORB/RIRB.  Basically, the
        single command mode is provided only for BIOS, and you won't get
        unsolicited events, too.  But, at least, this works independently
        from the irq.  Remember this is a last resort, and should be
        avoided as much as possible...
        
        MORE NOTES ON "azx_get_response timeout" PROBLEMS:
        On some hardwares, you may need to add a proper probe_mask option
        to avoid the "azx_get_response timeout" problem above, instead.
        This occurs when the access to non-existing or non-working codec slot
        (likely a modem one) causes a stall of the communication via HD-audio
        bus.  You can see which codec slots are probed by enabling
        CONFIG_SND_DEBUG_VERBOSE, or simply from the file name of the codec
        proc files.  Then limit the slots to probe by probe_mask option.
        For example, probe_mask=1 means to probe only the first slot, and
        probe_mask=4 means only the third slot.
    
        The power-management is supported.
    En mi caso particular, mi codec es ALC662 , por lo cual, según el tipo, elegi el modelname "3stack-6ch-dig" :

    Code:
    options snd-hda-intel model=3stack-6ch-dig
    Reiniciar Ubuntu (seguramente no es necesario si se sabe reiniciar todos los servidores de sonido, los modulos implicados, y los procesos necesarios, pero como no lo se, simplemente reinicio)

    Al reiniciar, al hacer doble clic en el CONTROL DE VOLUME de Gnome, tengo las opciones para activar los 6 canales. Mis películas codificadas en AC3 y DVDs comerciales, ya funcionan con sonido 5.1!!!

    Para testear que todos los canales estén funcionando, desde terminal:
    Code:
    speaker-test -Dplug:surround51 -c6 -l1 -twav
    Y a disfrutar..!
    Attached Images Attached Images
    Last edited by User21; November 17th, 2008 at 04:25 AM.
    << User21 / FreeDownload >>
    http://twitter.com/user21


  3. #3
    Join Date
    Aug 2007
    Beans
    490

    Re: Necesito sonido 5.1 en Hardy (a como de lugar)

    que compu tenes capo?

  4. #4
    Join Date
    May 2007
    Location
    Santa Fe, Argentina
    Beans
    518
    Distro
    Ubuntu 11.04 Natty Narwhal

    Post Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Es un AMD Athlon 64 X2 4600+; Motherboard ASUS M2N-VM DVI chipset Nforce 630a; 2Gb RAM DDR2 800Mhz; Video Nvidia GT 8500GT 512 Mb RAM DDR2 y un gabinete "PICHINCHO". Por?
    << User21 / FreeDownload >>
    http://twitter.com/user21


  5. #5
    Join Date
    Jan 2007
    Location
    Caracas, Venezuela
    Beans
    16
    Distro
    Kubuntu 9.10 Karmic Koala

    Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Hey, muy útil tu post, tenía el mismo problema pero mi configuración es 4.0 y sirve el sonido perfecto en las cornetas traseras con la configuración de 6ch pero deja de funcionar la entrada del mic, y por consecuencia no tengo micrófono; me imagino que esto ocurre debido a que toma el jack del mic para las cornetas del medio (o que se yo). No sabes si existe una configuración de 4ch?

    Saludos, Alberto Guevara

  6. #6
    Join Date
    Apr 2006
    Beans
    16
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Desde que tengo Ubuntu 8.10 me quedé sin sonido...

    Probando el tutorial no puedo pasar de la primer linea

    Code:
    yunow@yunowPC:~$ aplay -l
    aplay: device_list:215: no se encontraron tarjetas de sonido...
    Code:
    lspci | grep Audio
    00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 04)
    No puedo cargar ningún módulo, parecen no existir...

    Code:
     
    sudo modprobe snd-hda-intel
    sudo: unable to resolve host yunowPC
    FATAL: Module snd_hda_intel not found.
    Sabes que puede ser???

  7. #7
    Join Date
    Feb 2009
    Beans
    1
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Thumbs up Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Hola gente antes que nada muchas gracias ^^ , entre al foro por q tenia un drama con mi placa de sonido (no se escuchaba nada xD) bueno este tuto me ayudo y esta completamente solucionado ^^

    Tengo Ubuntu 8.10 un mother ASUS P5GD2-X, Chipset de sonido CMI 9880 (para este chipset no existen mas soporte ni drivers en al pagina oficial, me fue mas facil instalarlo con Ubuntu q con Vista XD)

    Gracias!!!.

  8. #8
    Join Date
    Jul 2009
    Beans
    2

    Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    error abajo si esta lo q queria decir
    Last edited by daikun; November 5th, 2009 at 02:44 AM.

  9. #9
    Join Date
    Jul 2009
    Beans
    2

    Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Sabes tengo exactamente la misma tarjeta que tu, me sale la misma. y logro hacer estos pasos, modificando el alsa-base.conf o algo asi, lo pongo en la ultima linea

    options snd-hda-intel model=3stack-6ch-dig y no sucede nada, pero ahora buscando mas posibilidades y probando aca y haya. desconfigure Alsa por que no me sale ninguna posibilidad de hardware, nada de nada

    Por cierto estoy usando 9.10 y me encantaria poder usar mi tarjeta con todas sus funcionalidades ah!

    Alguien sabe si las tarjetas Genius 5.1 "basicas" son compatibles con Alsa?

    Gracias

  10. #10
    Join Date
    May 2007
    Location
    Buenos Aires - Argentina
    Beans
    3,661
    Distro
    Xubuntu 12.04 Precise Pangolin

    Re: [SOLVED] Necesito sonido 5.1 en Hardy (a como de lugar)

    Quote Originally Posted by daikun View Post
    Sabes tengo exactamente la misma tarjeta que tu, me sale la misma. y logro hacer estos pasos, modificando el alsa-base.conf o algo asi, lo pongo en la ultima linea

    options snd-hda-intel model=3stack-6ch-dig y no sucede nada, pero ahora buscando mas posibilidades y probando aca y haya. desconfigure Alsa por que no me sale ninguna posibilidad de hardware, nada de nada

    Por cierto estoy usando 9.10 y me encantaria poder usar mi tarjeta con todas sus funcionalidades ah!

    Alguien sabe si las tarjetas Genius 5.1 "basicas" son compatibles con Alsa?

    Gracias
    No se si te detuviste para leer el asunto de este thread pero lo que aqui se converso es sobre otra version mas antigua de Ubuntu: Hardy Heron 8.04

    Esta solucion es especifica para esta version, no para la que estas usando porque hay cosas que han cambiado y mucho.

    En todo caso, hay threads que hablan del problema con los sonidos en 9.10 en la seccion de software.
    Guillermo Lisi
    ----------------
    Minds are like parachutes. They only function when they are open.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •