8.10 External monitor screen resolution problem

**DigitalRonin** · November 3rd, 2008

I've just upgraded to 8.10 from 8.04 on my Panasonic Let's Note CF-R4. I use an external monitor, and can now dual-head, which I couldn't before. Woot!

But, the native resolution of the external monitor no longer shows up in the screen resolution config applet. I was using 1280x1024, but now the closest options are 1024x768 or 1360x768 (which is fugly).

Has anyone experienced a similar problem, or have any suggestions how to fix this?

Here are the relevant lines from lspci;

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)

Thanks in advance

David

**DigitalRonin** · November 4th, 2008

Solved.

Edit /etc/X11/xorg.conf

Find the Screen section - mine looked like this;

Section "Screen"
Identifier "Configured Screen Device"
Device "Configured Video Device"
SubSection "Display"
Virtual 2384 768
EndSubSection
EndSection

Delete the "Virtual* line and save the file. Then logout to restart xorg. I had my external monitor plugged in, at this point, which is almost certainly necessary.

After xorg restarts, go to the screen resolution applet and (in my case), the correct resolutions appear.

HTH

David

**posterberg** · November 5th, 2008

Originally Posted by DigitalRonin

Solved.

Edit /etc/X11/xorg.conf

Find the Screen section - mine looked like this;

Delete the "Virtual* line and save the file. Then logout to restart xorg. I had my external monitor plugged in, at this point, which is almost certainly necessary.

After xorg restarts, go to the screen resolution applet and (in my case), the correct resolutions appear.

HTH

David

I have the same problem, same graphics card. I don't, however, have that virtual line in my xorg.conf. But still have the problem.

My xorg.conf look like this

Code:

Section "Device"
        Identifier      "Configured Video Device"
EndSection

Section "Monitor"
        Identifier      "Configured Monitor"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Monitor         "Configured Monitor"
        Device          "Configured Video Device"
EndSection

I just get 1024x768 with a monitor that did 1600x1200 properly in hardy heron.

Totally fresh install, haven't touched anything....

Highest resolution that I can find in the Screen Resolution tool is 1024x768.

Have a Dell 20" flat screen connected with DVI, using my DELL laptop's docking station....

**posterberg** · November 5th, 2008

I just tried the 'xfix' solution that was suggested in another thread.

That didn't work for me :-/

**posterberg** · November 6th, 2008

I tried:

Code:

 xrandr --output TMDS-1 --mode 1600x1200

That did work for me, but I don't think that I should have to pull of stunts like this. It should detect the proper resolution by itself. I don't like workarounds....

xrandr also report

Code:

Screen 0: minimum 320 x 200, current 1024 x 768, maximum 1680 x 1680
VGA disconnected (normal left inverted right x axis y axis)
LVDS connected 1024x768+0+0 (normal left inverted right x axis y axis) 261mm x 163mm
   1280x800       59.8 +
   1024x768       60.0* 
   800x600        60.3  
   640x480        59.9  
TMDS-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 367mm x 275mm
   1600x1200      60.0 +   60.0  
   1680x1050      60.0  
   1600x1024      60.2  
   1400x1050      74.8     70.0     60.0  
   1280x1024      75.0     60.0     60.0  
   1440x900       59.9  
   1280x960       60.0  
   1360x768       59.8  
   1152x864       75.0     75.0     75.0     70.0     60.0  
   1024x768       75.1     75.0     70.1     60.0* 
   832x624        74.6  
   800x600        72.2     75.0     60.3     56.2  
   640x480        75.0     72.8     75.0     60.0     59.9  
   720x400        70.1  
TV disconnected (normal left inverted right x axis y axis)

Which clearly shows that my monitor do report it's resolution properly...

**wgrant** · November 6th, 2008

See the X resolution fixing documentation.

posterberg: It's probable that your monitor needs an EDID quirk; please attach /var/log/Xorg.0.log, the output of 'xrandr --verbose' and your monitor's model details.

**posterberg** · November 6th, 2008

Thank you for your response!

Here's the requested information.

Monitor details:
DELL 2007FPb (I couldn't find anything better, sorry about that. Have read every small sticker on it)

xrandr

Code:

Screen 0: minimum 320 x 200, current 1600 x 1200, maximum 1680 x 1680
VGA disconnected (normal left inverted right x axis y axis)
    Identifier: 0x3b
    Timestamp:  70060
    Subpixel:   unknown
    Clones:    
    CRTCs:      0 1
LVDS connected 1024x768+0+0 (0x40) normal (normal left inverted right x axis y axis) 261mm x 163mm
    Identifier: 0x3c
    Timestamp:  70060
    Subpixel:   horizontal rgb
    Clones:    
    CRTC:       1
    CRTCs:      1
    EDID_DATA:
        00ffffffffffff004ca3415400000000
        00110103801a10780a87f594574f8c27
        27505400000001010101010101010101
        010101010101121b008b502010303020
        360005a3100000190000000f00000000
        000000000032d2023200000000fe0050
        593637350331323141540a20000000fe
        00263741496c88b0ff01010a20200084
    PANEL_FITTING: full
        supported: center       full_aspect  full        
    BACKLIGHT_CONTROL: combination
        supported: native       legacy       combination  kernel      
    BACKLIGHT: 312 (0x00000138) range:  (0,312)
  1280x800 (0x3f)   69.3MHz -HSync -VSync +preferred
        h: width  1280 start 1328 end 1360 total 1419 skew    0 clock   48.8KHz
        v: height  800 start  803 end  809 total  816           clock   59.8Hz
  1024x768 (0x40)   65.0MHz -HSync -VSync *current
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   48.4KHz
        v: height  768 start  771 end  777 total  806           clock   60.0Hz
  800x600 (0x41)   40.0MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock   37.9KHz
        v: height  600 start  601 end  605 total  628           clock   60.3Hz
  640x480 (0x42)   25.2MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock   31.5KHz
        v: height  480 start  490 end  492 total  525           clock   59.9Hz
TMDS-1 connected 1600x1200+0+0 (0x43) normal (normal left inverted right x axis y axis) 367mm x 275mm
    Identifier: 0x3d
    Timestamp:  70060
    Subpixel:   horizontal rgb
    Clones:    
    CRTC:       0
    CRTCs:      0 1
    EDID_DATA:
        00ffffffffffff0010ac21a0534a3830
        2a10010380291f78eeee91a3544c9926
        0f5054a54b008180a940714f01010101
        010101010101483f403062b0324040c0
        13006f131100001e000000ff00593939
        323336414830384a530a000000fc0044
        454c4c203230303746500a20000000fd
        00384c1e5311000a2020202020200071
  1600x1200 (0x43)  162.0MHz +HSync +VSync *current +preferred
        h: width  1600 start 1664 end 1856 total 2160 skew    0 clock   75.0KHz
        v: height 1200 start 1201 end 1204 total 1250           clock   60.0Hz
  1600x1200 (0x44)  161.0MHz -HSync +VSync
        h: width  1600 start 1704 end 1880 total 2160 skew    0 clock   74.5KHz
        v: height 1200 start 1201 end 1204 total 1242           clock   60.0Hz
  1680x1050 (0x45)  146.2MHz -HSync +VSync
        h: width  1680 start 1784 end 1960 total 2240 skew    0 clock   65.3KHz
        v: height 1050 start 1053 end 1059 total 1089           clock   60.0Hz
  1600x1024 (0x46)  103.1MHz +HSync +VSync
        h: width  1600 start 1600 end 1656 total 1664 skew    0 clock   62.0KHz
        v: height 1024 start 1024 end 1029 total 1030           clock   60.2Hz
  1400x1050 (0x47)  155.8MHz +HSync +VSync
        h: width  1400 start 1464 end 1784 total 1912 skew    0 clock   81.5KHz
        v: height 1050 start 1052 end 1064 total 1090           clock   74.8Hz
  1400x1050 (0x48)  145.1MHz -HSync +VSync
        h: width  1400 start 1496 end 1648 total 1896 skew    0 clock   76.5KHz
        v: height 1050 start 1051 end 1054 total 1093           clock   70.0Hz
  1400x1050 (0x49)  122.0MHz +HSync +VSync
        h: width  1400 start 1488 end 1640 total 1880 skew    0 clock   64.9KHz
        v: height 1050 start 1052 end 1064 total 1082           clock   60.0Hz
  1280x1024 (0x4a)  135.0MHz +HSync +VSync
        h: width  1280 start 1296 end 1440 total 1688 skew    0 clock   80.0KHz
        v: height 1024 start 1025 end 1028 total 1066           clock   75.0Hz
  1280x1024 (0x4b)  108.9MHz -HSync +VSync
        h: width  1280 start 1360 end 1496 total 1712 skew    0 clock   63.6KHz
        v: height 1024 start 1025 end 1028 total 1060           clock   60.0Hz
  1280x1024 (0x4c)  108.0MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock   64.0KHz
        v: height 1024 start 1025 end 1028 total 1066           clock   60.0Hz
  1440x900 (0x4d)  106.5MHz -HSync +VSync
        h: width  1440 start 1520 end 1672 total 1904 skew    0 clock   55.9KHz
        v: height  900 start  903 end  909 total  934           clock   59.9Hz
  1280x960 (0x4e)  108.0MHz +HSync +VSync
        h: width  1280 start 1376 end 1488 total 1800 skew    0 clock   60.0KHz
        v: height  960 start  961 end  964 total 1000           clock   60.0Hz
  1360x768 (0x4f)   84.8MHz -HSync +VSync
        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock   47.7KHz
        v: height  768 start  771 end  781 total  798           clock   59.8Hz
  1152x864 (0x50)  108.0MHz +HSync +VSync
        h: width  1152 start 1216 end 1344 total 1600 skew    0 clock   67.5KHz
        v: height  864 start  865 end  868 total  900           clock   75.0Hz
  1152x864 (0x51)  105.0MHz -HSync +VSync
        h: width  1152 start 1224 end 1352 total 1552 skew    0 clock   67.6KHz
        v: height  864 start  865 end  868 total  902           clock   75.0Hz
  1152x864 (0x52)  105.0MHz -HSync +VSync
        h: width  1152 start 1224 end 1352 total 1552 skew    0 clock   67.6KHz
        v: height  864 start  865 end  868 total  902           clock   75.0Hz
  1152x864 (0x53)   96.8MHz -HSync +VSync
        h: width  1152 start 1224 end 1344 total 1536 skew    0 clock   63.0KHz
        v: height  864 start  865 end  868 total  900           clock   70.0Hz
  1152x864 (0x54)   81.6MHz -HSync +VSync
        h: width  1152 start 1216 end 1336 total 1520 skew    0 clock   53.7KHz
        v: height  864 start  865 end  868 total  895           clock   60.0Hz
  1024x768 (0x55)   78.8MHz +HSync +VSync
        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock   60.1KHz
        v: height  768 start  769 end  772 total  800           clock   75.1Hz
  1024x768 (0x56)   78.8MHz +HSync +VSync
        h: width  1024 start 1040 end 1136 total 1312 skew    0 clock   60.0KHz
        v: height  768 start  769 end  772 total  800           clock   75.0Hz
  1024x768 (0x57)   75.0MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1328 skew    0 clock   56.5KHz
        v: height  768 start  771 end  777 total  806           clock   70.1Hz
  1024x768 (0x40)   65.0MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock   48.4KHz
        v: height  768 start  771 end  777 total  806           clock   60.0Hz
  832x624 (0x58)   57.3MHz -HSync -VSync
        h: width   832 start  864 end  928 total 1152 skew    0 clock   49.7KHz
        v: height  624 start  625 end  628 total  667           clock   74.6Hz
  800x600 (0x59)   50.0MHz +HSync +VSync
        h: width   800 start  856 end  976 total 1040 skew    0 clock   48.1KHz
        v: height  600 start  637 end  643 total  666           clock   72.2Hz
  800x600 (0x5a)   49.5MHz +HSync +VSync
        h: width   800 start  816 end  896 total 1056 skew    0 clock   46.9KHz
        v: height  600 start  601 end  604 total  625           clock   75.0Hz
  800x600 (0x41)   40.0MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock   37.9KHz
        v: height  600 start  601 end  605 total  628           clock   60.3Hz
  800x600 (0x5b)   36.0MHz +HSync +VSync
        h: width   800 start  824 end  896 total 1024 skew    0 clock   35.2KHz
        v: height  600 start  601 end  603 total  625           clock   56.2Hz
  640x480 (0x5c)   31.5MHz -HSync -VSync
        h: width   640 start  656 end  720 total  840 skew    0 clock   37.5KHz
        v: height  480 start  481 end  484 total  500           clock   75.0Hz
  640x480 (0x5d)   31.5MHz -HSync -VSync
        h: width   640 start  664 end  704 total  832 skew    0 clock   37.9KHz
        v: height  480 start  489 end  492 total  520           clock   72.8Hz
  640x480 (0x5c)   31.5MHz -HSync -VSync
        h: width   640 start  656 end  720 total  840 skew    0 clock   37.5KHz
        v: height  480 start  481 end  484 total  500           clock   75.0Hz
  640x480 (0x5e)   25.2MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock   31.5KHz
        v: height  480 start  490 end  492 total  525           clock   60.0Hz
  640x480 (0x42)   25.2MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock   31.5KHz
        v: height  480 start  490 end  492 total  525           clock   59.9Hz
  720x400 (0x5f)   28.3MHz -HSync +VSync
        h: width   720 start  738 end  846 total  900 skew    0 clock   31.5KHz
        v: height  400 start  412 end  414 total  449           clock   70.1Hz
TV disconnected (normal left inverted right x axis y axis)
    Identifier: 0x3e
    Timestamp:  70060
    Subpixel:   unknown
    Clones:    
    CRTCs:      0 1
    BOTTOM: 37 (0x00000025) range:  (0,100)
    RIGHT: 46 (0x0000002e) range:  (0,100)
    TOP: 36 (0x00000024) range:  (0,100)
    LEFT: 54 (0x00000036) range:  (0,100)
    TV_FORMAT: NTSC-M
        supported: NTSC-M       NTSC-443     NTSC-J       PAL-M       
                   PAL-N        PAL

Xorg.0.log

Code:

X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-19-server i686 Ubuntu
Current Operating System: Linux XXX-XXXXXX 2.6.27-7-generic #1 SMP Tue Nov 4 19:33:20 UTC 2008 i686
Build Date: 24 October 2008  08:00:16AM
xorg-server 2:1.5.2-2ubuntu3 (buildd@rothera.buildd) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov  6 08:49:30 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section.  Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Configured Monitor"
(**) |   |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d9a40
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/0, 0xd0000000/0, 0xefec0000/0, I/O @ 0x0000eff8/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/0
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"

(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"

(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"

(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 2.4.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B]
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B]
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B]
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"

(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEFF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"

(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 8
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): I2C device "SDVOB DDC Bus:ddc2" registered at address 0xA0.
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using fuzzy aspect match for initial modes
(II) intel(0): Output LVDS using initial mode 1024x768
(II) intel(0): Output TMDS-1 using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 2.4.0
    ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x80000203 to 0x00000000
(WW) intel(0): PIPEASTAT before: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): PIPEASTAT after: status:
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000242 to 0x00000000
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status:
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x10000000 to 0x000c0000
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x800010bb
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[B]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] 0    0    0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    [5] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    [6] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    [7] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[B]
    [8] -1    0    0x00000000 - 0x00000000 (0x1) IX[B]
    [9] 0    0    0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [10] 0    0    0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] loaded kernel module for "i915" driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xeff00000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000
(II) intel(0): [drm] mapped back buffer at 0xd5000000, handle = 0xd5000000
(II) intel(0): [drm] mapped depth buffer at 0xd6000000, handle = 0xd6000000
(II) intel(0): [drm] mapped classic textures at 0xd7000000, handle = 0xd7000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 41287680 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): Current clock rate multiplier: 8
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06000000 (pgoffset 24576)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x07000000 (pgoffset 28672)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x000000007f820000 physical
)
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x000000007fe20000 physical
)
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x000000007fe21000 physical
)
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x000000007fe33000 physical
)
(II) intel(0): 0x007bf000:            end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (13440 kB) X tiled
(II) intel(0): 0x02000000-0x0475ffff: exa offscreen (40320 kB)
(II) intel(0): 0x05000000-0x05ffffff: back buffer (13440 kB) X tiled
(II) intel(0): 0x06000000-0x06ffffff: depth buffer (13440 kB) X tiled
(II) intel(0): 0x07000000-0x08ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is on
(II) intel(0):   Display plane B is now enabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe none
(II) intel(0):   Output LVDS is connected to pipe B
(II) intel(0):   Output TMDS-1 is connected to pipe A
(II) intel(0):   Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 261 x 163
(EE) intel(0): underrun on pipe B!
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"

(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 2.0.99
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
(II) LoadModule: "synaptics"

(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.2, module version = 0.15.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.15.2
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(**) Option "Device" "/dev/input/event12"
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(**) AlpsPS/2 ALPS GlidePoint: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
(II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
(--) AlpsPS/2 ALPS GlidePoint touchpad found
(II) config/hal: Adding input device PS/2 Mouse
(**) PS/2 Mouse: always reports core events
(**) PS/2 Mouse: Device: "/dev/input/event11"
(II) PS/2 Mouse: Found x and y relative axes
(II) PS/2 Mouse: Found 3 mouse buttons
(II) PS/2 Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "se"
(**) AT Translated Set 2 keyboard: xkb_layout: "se"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) AT Translated Set 2 keyboard: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event4"
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found 5 mouse buttons
(II) Logitech USB Receiver: Configuring as mouse
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Microsoft Natural? Ergonomic Keyboard 4000
(**) Microsoft Natural? Ergonomic Keyboard 4000: always reports core events
(**) Microsoft Natural? Ergonomic Keyboard 4000: Device: "/dev/input/event3"
(II) Microsoft Natural? Ergonomic Keyboard 4000: Found 1 mouse buttons
(II) Microsoft Natural? Ergonomic Keyboard 4000: Found keys
(II) Microsoft Natural? Ergonomic Keyboard 4000: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Natural? Ergonomic Keyboard 4000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_model: "pc105"
(**) Option "xkb_layout" "se"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_layout: "se"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_options: "lv3:ralt_switch"
(**) Microsoft Natural? Ergonomic Keyboard 4000: YAxisMapping: buttons 4 and 5
(**) Microsoft Natural? Ergonomic Keyboard 4000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) config/hal: Adding input device Microsoft Natural? Ergonomic Keyboard 4000
(**) Microsoft Natural? Ergonomic Keyboard 4000: always reports core events
(**) Microsoft Natural? Ergonomic Keyboard 4000: Device: "/dev/input/event2"
(II) Microsoft Natural? Ergonomic Keyboard 4000: Found keys
(II) Microsoft Natural? Ergonomic Keyboard 4000: Configuring as keyboard
(II) XINPUT: Adding extended input device "Microsoft Natural? Ergonomic Keyboard 4000" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_model: "pc105"
(**) Option "xkb_layout" "se"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_layout: "se"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Microsoft Natural? Ergonomic Keyboard 4000: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event9"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "se"
(**) Video Bus: xkb_layout: "se"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Video Bus: xkb_options: "lv3:ralt_switch"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Video Bus: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) Video Bus: xkb_model: "pc105"
(**) Option "xkb_layout" "se"
(**) Video Bus: xkb_layout: "se"
(**) Option "xkb_options" "lv3:ralt_switch"
(**) Video Bus: xkb_options: "lv3:ralt_switch"
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
AUDIT: Thu Nov  6 08:49:41 2008: 5684 X: client 4 rejected from local host ( uid=0 gid=0 pid=5953 )
AUDIT: Thu Nov  6 08:49:45 2008: 5684 X: client 4 rejected from local host ( uid=1001 gid=1001 pid=5959 )
AUDIT: Thu Nov  6 08:49:45 2008: 5684 X: client 4 rejected from local host ( uid=1001 gid=1001 pid=5960 )
AUDIT: Thu Nov  6 08:49:45 2008: 5684 X: client 4 rejected from local host ( uid=1001 gid=1001 pid=5961 )
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(EE) intel(0): underrun on pipe B!
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993
(II) intel(0): EDID vendor "SEC", prod id 21569
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1419  800 803 809 816 -hsync -vsync (48.8 kHz)
(II) intel(0): EDID vendor "SEC", prod id 21569
(EE) intel(0): Unable to write to SDVOCTRL_E for SDVOB Slave 0x70.
(II) intel(0): EDID vendor "DEL", prod id 40993

**wgrant** · November 6th, 2008

Actually, please install read-edid, run 'sudo get-edid > /tmp/getedid.dat', and attach that file here. It's binary, so don't try to copy and paste.

**posterberg** · November 6th, 2008

Thank,

attached and parsed for your convenience =)

Code:

get-edid: get-edid version 1.4.1

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
    Function supported
    Call successful

    VBE version 300
    VBE string at 0x11110 "Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS"

VBE/DDC service about to be called
    Report DDC capabilities

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
    Function supported
    Call successful

    Monitor and video card combination does not support DDC1 transfers
    Monitor and video card combination supports DDC2 transfers
    0 seconds per 128 byte EDID block transfer
    Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
    Read EDID

    Performing real mode VBE call
    Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
parse-edid: parse-edid version 1.4.1
    Function supported
    Call successful

parse-edid: EDID checksum passed.

    # EDID version 1 revision 3
Section "Monitor"
    # Block type: 2:0 3:ff
    # Block type: 2:0 3:fc
    Identifier "DELL 2007FP"
    VendorName "DEL"
    ModelName "DELL 2007FP"
    # Block type: 2:0 3:ff
    # Block type: 2:0 3:fc
    # Block type: 2:0 3:fd
    HorizSync 30-83
    VertRefresh 56-76
    # Max dot clock (video bandwidth) 170 MHz
    # DPMS capabilities: Active off:yes  Suspend:yes  Standby:yes

    Mode     "1600x1200"    # vfreq 60.000Hz, hfreq 75.000kHz
        DotClock    162.000000
        HTimings    1600 1664 1856 2160
        VTimings    1200 1201 1204 1250
        Flags    "+HSync" "+VSync"
    EndMode
    # Block type: 2:0 3:ff
    # Block type: 2:0 3:fc
    # Block type: 2:0 3:fd
EndSection

**wgrant** · November 6th, 2008

OK, so that all looks fine.

Glancing over the X server's code, it seems that on startup it should by default pick the biggest resolution that works on all attached displays. This looks like fairly normal behaviour.

You can cause the correct resolution to be set on login using System->Preferences->Screen Resolution.

Thread: 8.10 External monitor screen resolution problem

Thread Tools

Display

[SOLVED] 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Re: 8.10 External monitor screen resolution problem

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions