Hello Poland! (have good friends there)
What are you running, 32-bit or 64-bit Lucid?
Hello Poland! (have good friends there)
What are you running, 32-bit or 64-bit Lucid?
All the best
Antonio
Nice to hear that.
It's a brand new 32-bit Lucid Lynx Ubuntu.
ok, will try now to recompile the 32-bit driver. But, I bet it will only work on 1280x800 laptops.
All the best
Antonio
Driver re-compiled, now it is a native Lucid driver, please retry.
All the best
Antonio
Thank you Antonio for you effort. Unfortunately it didn't work for me... I tried without xorg.conf, with generated by Xorg -configure and with yours. Always more less the same error. But at least the driver was loaded up.
You can check my log - http://download.dekoderek.net/sis-on...ira/Xorg.0.log
I was trying to add VertRefresh/HorizSync values and some Modelines and nothing helped.
hello,
i'm running ubuntu 9.10, i have sis 672 as graphic card.
i tried to upgrade to ubuntu 10.04, but i have some troubles on server (mismuch...), so i decided to download an image cd burn it and run it as live session, but i obtain a blanck screen,
any one help me!!!
@azzedline go to my xorg page and follow the instructions for vesa driver (the very first ones), it will be the only working
@dekoderek none of the available modes is supported by your card, on my card:
#:~$ xrandr
Screen 0: minimum 640 x 480, current 1280 x 800, maximum 1280 x 800
default connected 1280x800+0+0 0mm x 0mm
1280x800 60.0*
1024x768 60.0
800x600 60.0
640x480 60.0
next step will be downloading the current kernel driver and try to make it recognize our board...back in the night...
All the best
Antonio
Yeah, and for me there's only
For default sis without any xorg.conf (as right after clean install) I don't even get 1024x768...piotrek@stanleymarsh:~$ xrandr
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected 1024x768+0+0 0mm x 0mm
1024x768 76.0*
800x600 73.0
640x480 73.0
ok, looked at the code.
{ PCI_CHIP_SIS670, "[M]670/[M]770[GX]" },
{ PCI_CHIP_SIS671, "[M]671/[M]771[GX]" },
these two chipsets were deliberately omitted from the code at some phase during a rewrite. It will require another substantial rewrite to get those supported. Now I don't have time to do it. We will have to live with the old recompiled driver for the moment being.
All the best
Antonio
Hey!
I have problem with SiS Mirage 3. 10.04 Install doesn't work - when I run the LiveCD 10.04 and Alternate CD 10.04, because screen flickering. How can I install 10.04 if there are these problems?
Thank you in advance!
Bookmarks