Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: DVD playback Hardy 8.04

  1. #1
    Join Date
    Oct 2005
    Location
    Nice, France
    Beans
    137
    Distro
    Ubuntu 8.04 Hardy Heron

    Question DVD playback Hardy 8.04

    Hi everyone,

    I'm having trouble enabling DVD playback on Hardy 8.04. I stopped using Ubuntu for a few months, but now I've reinstalled it and followed the steps I'd previously written down for DVD playback (worked like a charm a few months ago) - but this time it isn't working. The DVD drive makes noises but no player will let me open the disc.

    • I installed Ubuntu Restricted Extras.
    • I enabled Medibuntu sources.
    • I installed totem-xine.
    • I pasted this into the terminal: sudo apt-get install libdvdcss2 libdvdread3 libdvdnav4 build-essential debhelper fakeroot
    • Then: sudo /usr/share/doc/libdvdread3/install-css.sh
    • I restarted the computer then configured Totem-Xine as default.


    I tried with VLC, but nothing happens. And I tried searching the forums, but I couldn't find anything related to Hardy... (bad searching perhaps?)

    Thanks a lot for any help or suggestions.
    Google is my friend. Saves my butt every time (well most times).

  2. #2
    Join Date
    Feb 2008
    Location
    Oblivion
    Beans
    Hidden!
    Distro
    Xubuntu

    Re: DVD playback Hardy 8.04

    http://ubuntu-tutorials.com/2008/07/...on-ubuntu-804/

    ... might help, from here:

    http://au.altavista.com/web/results?...04&kgs=0&kls=0

    Never restrict your searches to the forum. There are tutorials all over and the forums also pop up in a general search. I personally never search the forums specifically. Half the time I end up here from a general search if there is anything pertinent to my prob.

  3. #3
    Join Date
    Oct 2005
    Location
    Nice, France
    Beans
    137
    Distro
    Ubuntu 8.04 Hardy Heron

    Re: DVD playback Hardy 8.04

    Hi, thanks a lot for your suggestions. I did search Google for solutions to my problem, but most of the results I got were for the latest version of Ubuntu, or said to do stuff I already did. Hence my search through the forums.

    I did already see the site you linked to, but it seems it just tells me what I've already done? (Installing libdvdread3 and/or libdvdcss2.) I tried it anyway, still no luck. I have rebooted a few times, no change.

    Any more ideas?

    Cheers
    Last edited by duckgoesoink; September 12th, 2009 at 10:40 AM.
    Google is my friend. Saves my butt every time (well most times).

  4. #4
    Join Date
    Jul 2009
    Location
    India
    Beans
    233
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: DVD playback Hardy 8.04

    When you tried Totem to play the DVD, didn't it ask for additional plugin? If not, try it once more, and see whether it asks for a plugin or not. If yes, then just click that, and wait for the plugin to be installed.
    Spread the Light of Ubuntu, to all. Like the first showers of Monsoon, like the cool breeze from the Himalayas, and like the fresh air flowing around us, it is free, free from all Crashes, Viruses and all that can cause us trouble. .

  5. #5
    Join Date
    Oct 2005
    Location
    Nice, France
    Beans
    137
    Distro
    Ubuntu 8.04 Hardy Heron

    Re: DVD playback Hardy 8.04

    Quote Originally Posted by rocket16 View Post
    When you tried Totem to play the DVD, didn't it ask for additional plugin? If not, try it once more, and see whether it asks for a plugin or not. If yes, then just click that, and wait for the plugin to be installed.
    Hi, thanks for the suggestion, but neither Totem nor VLC asked for plugins (since I started using Ubuntu a couple of years ago, I've always had to follow a few steps to set it up manually).

    I tried running totem-xine as sudo, but the option to play a disc is greyed out. I also get this message in the terminal:
    Code:
    ** (totem-xine:8578): WARNING **: Failed to create dbus proxy for org.gnome.SettingsDaemon: Could not get owner of name 'org.gnome.SettingsDaemon': no such name
    I tried running vlc as sudo, but it doesn't work either. VLC says:
    Code:
    Unable to open 'dvd:///dev/scd0'
    and the terminal says:
    Code:
    libdvdnav: Using dvdnav version 0.1.10 from http://dvd.sf.net
    libdvdread: Using libdvdcss version 1.2.9 for DVD access
    libdvdread: Could not open /dev/scd0 with libdvdcss.
    libdvdread: Can't open /dev/scd0 for reading
    libdvdnav: vm: faild to open/read the DVD
    I would appreciate a human explanation of the errors (I don't really understand terminal garble).

    Thanks a lot
    Google is my friend. Saves my butt every time (well most times).

  6. #6
    Join Date
    Oct 2007
    Beans
    Hidden!

    Re: DVD playback Hardy 8.04

    Does the dvd show up at all in places > computer ? Im thinking perhaps you're having problem accessing or reading the DVD, and it has nothing to do with codecs to read or decrypt it. Does it read data cds or dvds ?

    edit: our posts crossed, but it seems I was right. Let me look at those messages...

  7. #7
    Join Date
    Oct 2005
    Location
    Nice, France
    Beans
    137
    Distro
    Ubuntu 8.04 Hardy Heron

    Re: DVD playback Hardy 8.04

    Quote Originally Posted by P4man View Post
    Does the dvd show up at all in places > computer ? Im thinking perhaps you're having problem accessing or reading the DVD, and it has nothing to do with codecs to read or decrypt it. Does it read data cds or dvds ?
    Hi, thanks for the reply. It does successfully read data CDs and DVDs, but is really having issues with commercial DVDs. I tried using different DVDs - some of them (but not all) show up in Places > Computer, but still none of them play... They all cause the disc drive to do spinny stuff (you can hear it trying).

    When I go to Computer in Nautilus and try to open the CD-RW/DVD-+RW Drive, it says:
    Unable to mount location, No media in the drive.
    Google is my friend. Saves my butt every time (well most times).

  8. #8
    Join Date
    Oct 2007
    Beans
    Hidden!

    Re: DVD playback Hardy 8.04

    So you got a problem with the dvd drive. (Im assuming you are sure those cds/dvds are fine by themselve and play on a different OS or computer).

    Can you open a terminal and type

    Code:
    dmesg > log.txt
    then attach your log.txt (in your homefolder) to a post here so we can have a look?

  9. #9
    Join Date
    Oct 2005
    Location
    Nice, France
    Beans
    137
    Distro
    Ubuntu 8.04 Hardy Heron

    Re: DVD playback Hardy 8.04

    The DVD drive works fine on Vista, and has previously worked fine on Feisty and Hardy... (the discs work on other computers too).

    The log.txt is too big to attach - there is a limit of 19.5 KB for this filetype. I'll throw it in code tags.

    Code:
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Linux version 2.6.24-24-generic (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Tue Aug 18 17:04:53 UTC 2009 (Ubuntu 2.6.24-24.59-generic)
    [    0.000000] BIOS-provided physical RAM map:
    [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ffa8000 (usable)
    [    0.000000]  BIOS-e820: 000000003ffa8000 - 000000003ffb0000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
    [    0.000000]  BIOS-e820: 000000003ffbe000 - 0000000040000000 (ACPI NVS)
    [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [    0.000000]  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
    [    0.000000] 127MB HIGHMEM available.
    [    0.000000] 896MB LOWMEM available.
    [    0.000000] found SMP MP-table at 000ff780
    [    0.000000] Entering add_active_range(0, 0, 262056) 0 entries of 256 used
    [    0.000000] Zone PFN ranges:
    [    0.000000]   DMA             0 ->     4096
    [    0.000000]   Normal       4096 ->   229376
    [    0.000000]   HighMem    229376 ->   262056
    [    0.000000] Movable zone start PFN for each node
    [    0.000000] early_node_map[1] active PFN ranges
    [    0.000000]     0:        0 ->   262056
    [    0.000000] On node 0 totalpages: 262056
    [    0.000000]   DMA zone: 32 pages used for memmap
    [    0.000000]   DMA zone: 0 pages reserved
    [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
    [    0.000000]   Normal zone: 1760 pages used for memmap
    [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
    [    0.000000]   HighMem zone: 255 pages used for memmap
    [    0.000000]   HighMem zone: 32425 pages, LIFO batch:7
    [    0.000000]   Movable zone: 0 pages used for memmap
    [    0.000000] DMI 2.4 present.
    [    0.000000] ACPI: RSDP signature @ 0xC00F7AF0 checksum 0
    [    0.000000] ACPI: RSDP 000F7AF0, 0014 (r0 ACPIAM)
    [    0.000000] ACPI: RSDT 3FFB0000, 0040 (r1 AMI    OEMRSDT   2000715 MSFT       97)
    [    0.000000] ACPI: FACP 3FFB0200, 0084 (r2 AMI    OEMFACP   2000715 MSFT       97)
    [    0.000000] ACPI: DSDT 3FFB05E0, 8918 (r1  F3J00 F3J00001        1 INTL  2002026)
    [    0.000000] ACPI: FACS 3FFBE000, 0040
    [    0.000000] ACPI: APIC 3FFB0390, 005C (r1 AMI    OEMAPIC   2000715 MSFT       97)
    [    0.000000] ACPI: MCFG 3FFB03F0, 003C (r1 AMI    OEMMCFG   2000715 MSFT       97)
    [    0.000000] ACPI: BOOT 3FFB05B0, 0028 (r1 AMI    OEMBOOT   2000715 MSFT       97)
    [    0.000000] ACPI: SLIC 3FFB0430, 0176 (r1 AMI    OEMSLIC   2000715 MSFT       97)
    [    0.000000] ACPI: OEMB 3FFBE040, 0046 (r1 AMI    AMI_OEM   2000715 MSFT       97)
    [    0.000000] ACPI: HPET 3FFB8F00, 0038 (r1 AMI        ASUS  2000715 MSFT       97)
    [    0.000000] ACPI: PM-Timer IO Port: 0x808
    [    0.000000] ACPI: Local APIC address 0xfee00000
    [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [    0.000000] Processor #0 6:15 APIC version 20
    [    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [    0.000000] Processor #1 6:15 APIC version 20
    [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [    0.000000] ACPI: IRQ0 used by override.
    [    0.000000] ACPI: IRQ2 used by override.
    [    0.000000] ACPI: IRQ9 used by override.
    [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
    [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [    0.000000] Using ACPI (MADT) for SMP configuration information
    [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
    [    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    [    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
    [    0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260009
    [    0.000000] Kernel command line: root=UUID=5d4b8625-2a5c-44a0-b5ff-e8336206890a ro quiet splash
    [    0.000000] mapped APIC to ffffb000 (fee00000)
    [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
    [    0.000000] Enabling fast FPU save and restore... done.
    [    0.000000] Enabling unmasked SIMD FPU exception support... done.
    [    0.000000] Initializing CPU#0
    [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
    [    0.000000] Detected 1662.576 MHz processor.
    [   16.272780] Console: colour VGA+ 80x25
    [   16.272784] console [tty0] enabled
    [   16.273051] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [   16.273346] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [   16.296588] Memory: 1027072k/1048224k available (2181k kernel code, 20504k reserved, 1006k data, 368k init, 130720k highmem)
    [   16.296595] virtual kernel memory layout:
    [   16.296596]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
    [   16.296597]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    [   16.296598]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    [   16.296599]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
    [   16.296600]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
    [   16.296601]       .data : 0xc0321548 - 0xc041cdc4   (1006 kB)
    [   16.296602]       .text : 0xc0100000 - 0xc0321548   (2181 kB)
    [   16.296606] Checking if this processor honours the WP bit even in supervisor mode... Ok.
    [   16.296636] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    [   16.296781] hpet clockevent registered
    [   16.376666] Calibrating delay using timer specific routine.. 3328.90 BogoMIPS (lpj=6657803)
    [   16.376683] Security Framework initialized
    [   16.376687] SELinux:  Disabled at boot.
    [   16.376698] AppArmor: AppArmor initialized
    [   16.376702] Failure registering capabilities with primary security module.
    [   16.376709] Mount-cache hash table entries: 512
    [   16.376813] Initializing cgroup subsys ns
    [   16.376817] Initializing cgroup subsys cpuacct
    [   16.376826] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
    [   16.376834] monitor/mwait feature present.
    [   16.376835] using mwait in idle threads.
    [   16.376839] CPU: L1 I cache: 32K, L1 D cache: 32K
    [   16.376842] CPU: L2 cache: 2048K
    [   16.376844] CPU: Physical Processor ID: 0
    [   16.376845] CPU: Processor Core ID: 0
    [   16.376849] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
    [   16.376857] Compat vDSO mapped to ffffe000.
    [   16.376868] Checking 'hlt' instruction... OK.
    [   16.393041] SMP alternatives: switching to UP code
    [   16.394702] Early unpacking initramfs... done
    [   16.738755] ACPI: Core revision 20070126
    [   16.738808] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    [   16.795779] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
    [   16.795796] SMP alternatives: switching to SMP code
    [   16.796543] Booting processor 1/1 eip 3000
    [   16.806747] Initializing CPU#1
    [   16.899857] Calibrating delay using timer specific routine.. 3072.74 BogoMIPS (lpj=6145492)
    [   16.899864] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001 00000000
    [   16.899869] monitor/mwait feature present.
    [   16.899872] CPU: L1 I cache: 32K, L1 D cache: 32K
    [   16.899874] CPU: L2 cache: 2048K
    [   16.899876] CPU: Physical Processor ID: 0
    [   16.899877] CPU: Processor Core ID: 1
    [   16.899880] CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0000e39d 00000000 00000001 00000000
    [   16.900462] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
    [   16.900485] Total of 2 processors activated (6401.64 BogoMIPS).
    [   16.900679] ENABLING IO-APIC IRQs
    [   16.900869] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    [   17.047743] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    [   17.067727] Brought up 2 CPUs
    [   17.067752] CPU0 attaching sched-domain:
    [   17.067755]  domain 0: span 03
    [   17.067757]   groups: 01 02
    [   17.067760] CPU1 attaching sched-domain:
    [   17.067762]  domain 0: span 03
    [   17.067763]   groups: 02 01
    [   17.068007] net_namespace: 64 bytes
    [   17.068019] Booting paravirtualized kernel on bare hardware
    [   17.068490] Time: 11:27:04  Date: 09/12/09
    [   17.068518] NET: Registered protocol family 16
    [   17.068732] EISA bus registered
    [   17.068737] ACPI: bus type pci registered
    [   17.068989] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
    [   17.068991] PCI: Using configuration type 1
    [   17.069012] Setting up standard PCI resources
    [   17.073139] ACPI: EC: Look up EC in DSDT
    [   17.079618] APIC error on CPU1: 00(40)
    [   17.133496] ACPI: Interpreter enabled
    [   17.133499] ACPI: (supports S0 S1 S3 S4 S5)
    [   17.133520] ACPI: Using IOAPIC for interrupt routing
    [   17.141540] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [   17.141543] ACPI: EC: driver started in poll mode
    [   17.141682] ACPI: PCI Root Bridge [PCI0] (0000:00)
    [   17.142479] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    [   17.142483] PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    [   17.143931] PCI: Transparent bridge - 0000:00:1e.0
    [   17.143981] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [   17.144172] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [   17.144285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
    [   17.144399] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [   17.144514] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    [   17.144632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [   17.157738] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12)
    [   17.157903] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 12)
    [   17.158065] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 12)
    [   17.158226] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 12)
    [   17.158387] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 12) *0, disabled.
    [   17.158550] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 12) *0, disabled.
    [   17.158712] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 12) *0, disabled.
    [   17.158874] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 12)
    [   17.159029] Linux Plug and Play Support v0.97 (c) Adam Belay
    [   17.159062] pnp: PnP ACPI init
    [   17.159070] ACPI: bus type pnp registered
    [   17.161476] pnp: PnP ACPI: found 13 devices
    [   17.161479] ACPI: ACPI bus type pnp unregistered
    [   17.161483] PnPBIOS: Disabled by ACPI PNP
    [   17.161728] PCI: Using ACPI for IRQ routing
    [   17.161731] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    [   17.203515] NET: Registered protocol family 8
    [   17.203518] NET: Registered protocol family 20
    [   17.203555] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [   17.203559] hpet0: 3 64-bit timers, 14318180 Hz
    [   17.204592] AppArmor: AppArmor Filesystem Enabled
    [   17.207388] Time: tsc clocksource has been installed.
    [   17.207402] Switched to high resolution mode on CPU 0
    [   17.207506] Switched to high resolution mode on CPU 1
    [   17.220368] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
    [   17.220379] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    [   17.220381] system 00:08: ioport range 0x800-0x87f has been reserved
    [   17.220384] system 00:08: ioport range 0x480-0x4bf has been reserved
    [   17.220387] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
    [   17.220390] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
    [   17.220393] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
    [   17.220397] system 00:08: iomem range 0xfed45000-0xfed89fff has been reserved
    [   17.220400] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved
    [   17.220403] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
    [   17.220411] system 00:0a: ioport range 0x250-0x253 has been reserved
    [   17.220414] system 00:0a: ioport range 0x256-0x25f has been reserved
    [   17.220417] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
    [   17.220419] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved
    [   17.220422] system 00:0a: iomem range 0xfec10000-0xfec17fff has been reserved
    [   17.220425] system 00:0a: iomem range 0xfec18000-0xfec1ffff has been reserved
    [   17.220428] system 00:0a: iomem range 0xfec20000-0xfec27fff has been reserved
    [   17.220434] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
    [   17.220440] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
    [   17.220443] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
    [   17.220445] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
    [   17.220448] system 00:0c: iomem range 0x100000-0x3fffffff could not be reserved
    [   17.220451] system 00:0c: iomem range 0x0-0x0 could not be reserved
    [   17.250877] PCI: Bridge: 0000:00:01.0
    [   17.250879]   IO window: disabled.
    [   17.250882]   MEM window: f9f00000-fdffffff
    [   17.250886]   PREFETCH window: bdf00000-ddefffff
    [   17.250890] PCI: Bridge: 0000:00:1c.0
    [   17.250893]   IO window: c000-cfff
    [   17.250899]   MEM window: fe000000-fe0fffff
    [   17.250903]   PREFETCH window: disabled.
    [   17.250909] PCI: Bridge: 0000:00:1c.1
    [   17.250910]   IO window: disabled.
    [   17.250916]   MEM window: fe100000-fe1fffff
    [   17.250920]   PREFETCH window: disabled.
    [   17.250926] PCI: Bridge: 0000:00:1c.2
    [   17.250929]   IO window: d000-dfff
    [   17.250935]   MEM window: fe200000-fe9fffff
    [   17.250940]   PREFETCH window: ddf00000-dfefffff
    [   17.250946] PCI: Bridge: 0000:00:1e.0
    [   17.250948]   IO window: disabled.
    [   17.250953]   MEM window: fea00000-feafffff
    [   17.250958]   PREFETCH window: disabled.
    [   17.250976] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    [   17.250981] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [   17.251005] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    [   17.251011] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [   17.251035] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
    [   17.251041] PCI: Setting latency timer of device 0000:00:1c.1 to 64
    [   17.251066] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    [   17.251071] PCI: Setting latency timer of device 0000:00:1c.2 to 64
    [   17.251086] PCI: Setting latency timer of device 0000:00:1e.0 to 64
    [   17.251097] NET: Registered protocol family 2
    [   17.288286] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [   17.288501] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [   17.288952] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [   17.289169] TCP: Hash tables configured (established 131072 bind 65536)
    [   17.289172] TCP reno registered
    [   17.300345] checking if image is initramfs... it is
    [   17.978234] Freeing initrd memory: 7326k freed
    [   17.978398] Simple Boot Flag at 0x52 set to 0x1
    [   17.979106] audit: initializing netlink socket (disabled)
    [   17.979119] audit(1252754824.448:1): initialized
    [   17.979324] highmem bounce pool size: 64 pages
    [   17.981451] VFS: Disk quotas dquot_6.5.1
    [   17.981531] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [   17.981668] io scheduler noop registered
    [   17.981670] io scheduler anticipatory registered
    [   17.981672] io scheduler deadline registered
    [   17.981683] io scheduler cfq registered (default)
    [   17.981801] Boot video device is 0000:01:00.0
    [   17.981917] PCI: Setting latency timer of device 0000:00:01.0 to 64
    [   17.981957] assign_interrupt_mode Found MSI capability
    [   17.981989] Allocate Port Service[0000:00:01.0:pcie00]
    [   17.982075] PCI: Setting latency timer of device 0000:00:1c.0 to 64
    [   17.982135] assign_interrupt_mode Found MSI capability
    [   17.982188] Allocate Port Service[0000:00:1c.0:pcie00]
    [   17.982224] Allocate Port Service[0000:00:1c.0:pcie02]
    [   17.982332] PCI: Setting latency timer of device 0000:00:1c.1 to 64
    [   17.982391] assign_interrupt_mode Found MSI capability
    [   17.982439] Allocate Port Service[0000:00:1c.1:pcie00]
    [   17.982473] Allocate Port Service[0000:00:1c.1:pcie02]
    [   17.982579] PCI: Setting latency timer of device 0000:00:1c.2 to 64
    [   17.982638] assign_interrupt_mode Found MSI capability
    [   17.982685] Allocate Port Service[0000:00:1c.2:pcie00]
    [   17.982719] Allocate Port Service[0000:00:1c.2:pcie02]
    [   17.982995] isapnp: Scanning for PnP cards...
    [   18.337402] isapnp: No Plug & Play device found
    [   18.364350] Real Time Clock Driver v1.12ac
    [   18.364552] hpet_resources: 0xfed00000 is busy
    [   18.364601] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    [   18.365912] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
    [   18.365984] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [   18.366089] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [   18.368682] i8042.c: Detected active multiplexing controller, rev 1.1.
    [   18.370103] serio: i8042 KBD port at 0x60,0x64 irq 1
    [   18.370108] serio: i8042 AUX0 port at 0x60,0x64 irq 12
    [   18.370110] serio: i8042 AUX1 port at 0x60,0x64 irq 12
    [   18.370113] serio: i8042 AUX2 port at 0x60,0x64 irq 12
    [   18.370115] serio: i8042 AUX3 port at 0x60,0x64 irq 12
    [   18.389641] mice: PS/2 mouse device common for all mice
    [   18.389769] EISA: Probing bus 0 at eisa.0
    [   18.389807] EISA: Detected 0 cards.
    [   18.389810] cpuidle: using governor ladder
    [   18.389811] cpuidle: using governor menu
    [   18.389893] NET: Registered protocol family 1
    [   18.389920] Using IPI No-Shortcut mode
    [   18.389951] registered taskstats version 1
    [   18.390063]   Magic number: 9:12:479
    [   18.390131] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [   18.390133] EDD information not available.
    [   18.390317] Freeing unused kernel memory: 368k freed
    [   18.390342] Write protecting the kernel read-only data: 802k
    [   18.422619] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [   19.609811] fuse init (API version 7.9)
    [   19.628633] ACPI: SSDT 3FFB8F40, 0D24 (r1    AMI   CPU1PM        1 INTL  2002026)
    [   19.629260] ACPI: CPU0 (power states: C1[C1] C2[C2])
    [   19.629265] ACPI: Processor [CPU1] (supports 8 throttling states)
    [   19.629326] ACPI: SSDT 3FFB9C70, 0D24 (r1    AMI   CPU2PM        1 INTL  2002026)
    [   19.629977] ACPI: CPU1 (power states: C1[C1] C2[C2])
    [   19.629982] ACPI: Processor [CPU2] (supports 8 throttling states)
    [   19.631590] ACPI: EC: non-query interrupt received, switching to interrupt mode
    [   19.636900] ACPI: Thermal Zone [THRM] (57 C)
    [   19.998070] r8169 Gigabit Ethernet driver 2.2LK loaded
    [   19.998101] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    [   19.998124] PCI: Setting latency timer of device 0000:02:00.0 to 64
    [   19.998520] eth0: RTL8168b/8111b at 0xf8854000, 00:1e:8c:61:4b:80, XID 38000000 IRQ 219
    [   20.038577] usbcore: registered new interface driver usbfs
    [   20.038602] usbcore: registered new interface driver hub
    [   20.038871] SCSI subsystem initialized
    [   20.038898] usbcore: registered new device driver usb
    [   20.071192] USB Universal Host Controller Interface driver v3.0
    [   20.071255] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
    [   20.071267] PCI: Setting latency timer of device 0000:00:1d.0 to 64
    [   20.071271] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [   20.071511] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    [   20.071545] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ec00
    [   20.071684] usb usb1: configuration #1 chosen from 1 choice
    [   20.071710] hub 1-0:1.0: USB hub found
    [   20.071716] hub 1-0:1.0: 2 ports detected
    [   20.074648] libata version 3.00 loaded.
    [   20.174952] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
    [   20.174965] PCI: Setting latency timer of device 0000:00:1d.1 to 64
    [   20.174970] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [   20.174996] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    [   20.175028] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e880
    [   20.175145] usb usb2: configuration #1 chosen from 1 choice
    [   20.175171] hub 2-0:1.0: USB hub found
    [   20.175176] hub 2-0:1.0: 2 ports detected
    [   20.278778] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    [   20.278790] PCI: Setting latency timer of device 0000:00:1d.2 to 64
    [   20.278794] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [   20.278818] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    [   20.278851] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
    [   20.278966] usb usb3: configuration #1 chosen from 1 choice
    [   20.278990] hub 3-0:1.0: USB hub found
    [   20.278994] hub 3-0:1.0: 2 ports detected
    [   20.382598] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    [   20.382610] PCI: Setting latency timer of device 0000:00:1d.3 to 64
    [   20.382615] uhci_hcd 0000:00:1d.3: UHCI Host Controller
    [   20.382643] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    [   20.382677] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e480
    [   20.382795] usb usb4: configuration #1 chosen from 1 choice
    [   20.382820] hub 4-0:1.0: USB hub found
    [   20.382825] hub 4-0:1.0: 2 ports detected
    [   20.486577] ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    [   20.512902] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
    [   20.512916] PCI: Setting latency timer of device 0000:00:1d.7 to 64
    [   20.512920] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [   20.512949] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
    [   20.516871] ehci_hcd 0000:00:1d.7: debug port 1
    [   20.516877] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    [   20.516884] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00
    [   20.521104] usb 2-1: new low speed USB device using uhci_hcd and address 2
    [   20.531268] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [   20.531384] usb usb5: configuration #1 chosen from 1 choice
    [   20.531411] hub 5-0:1.0: USB hub found
    [   20.531417] hub 5-0:1.0: 8 ports detected
    [   20.539275] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16]  MMIO=[feaff800-feafffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
    [   20.634285] ata_piix 0000:00:1f.2: version 2.12
    [   20.634297] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    [   20.634348] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
    [   20.634395] PCI: Setting latency timer of device 0000:00:1f.2 to 64
    [   20.634600] scsi0 : ata_piix
    [   20.635162] scsi1 : ata_piix
    [   20.636157] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    [   20.636160] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    [   20.798229] ata1.00: ATA-8: ST9120817AS, 3.AAA, max UDMA/133
    [   20.798234] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [   20.814207] ata1.00: configured for UDMA/133
    [   21.133862] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PR03, max UDMA/33
    [   21.305529] ata2.00: configured for UDMA/33
    [   21.305676] scsi 0:0:0:0: Direct-Access     ATA      ST9120817AS      3.AA PQ: 0 ANSI: 5
    [   21.309447] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PR03 PQ: 0 ANSI: 5
    [   21.321223] Driver 'sd' needs updating - please use bus_type methods
    [   21.321300] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    [   21.321313] sd 0:0:0:0: [sda] Write Protect is off
    [   21.321315] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [   21.321332] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [   21.321386] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    [   21.321396] sd 0:0:0:0: [sda] Write Protect is off
    [   21.321399] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [   21.321415] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [   21.321419]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
    [   21.341360]  sda1 sda2 < sda5 sda6 sda7 >
    [   21.369763] sd 0:0:0:0: [sda] Attached SCSI disk
    [   21.374014] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [   21.374035] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [   21.389583] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [   21.389588] Uniform CD-ROM driver Revision: 3.20
    [   21.389639] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [   21.393949] usb 5-4: new high speed USB device using ehci_hcd and address 3
    [   21.745578] usb 5-4: configuration #1 chosen from 1 choice
    [   21.824577] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c0000159349]
    [   22.223685] usb 5-8: new high speed USB device using ehci_hcd and address 5
    [   22.356393] usb 5-8: configuration #1 chosen from 1 choice
    [   22.356690] usbcore: registered new interface driver libusual
    [   22.362195] Initializing USB Mass Storage driver...
    [   22.436866] Attempting manual resume
    [   22.436869] swsusp: Resume From Partition 8:7
    [   22.436871] PM: Checking swsusp image.
    [   22.437071] PM: Resume from disk failed.
    [   22.472075] kjournald starting.  Commit interval 5 seconds
    [   22.472090] EXT3-fs: mounted filesystem with ordered data mode.
    [   22.595115] usb 2-1: new low speed USB device using uhci_hcd and address 3
    [   22.773259] usb 2-1: configuration #1 chosen from 1 choice
    [   23.014468] usb 3-1: new full speed USB device using uhci_hcd and address 2
    [   23.275415] usb 3-1: configuration #1 chosen from 1 choice
    [   23.279678] scsi2 : SCSI emulation for USB Mass Storage devices
    [   23.279755] usb-storage: device found at 3
    [   23.279757] usb-storage: waiting for device to settle before scanning
    [   23.279775] usbcore: registered new interface driver usb-storage
    [   23.279782] USB Mass Storage support registered.
    [   28.270516] usb-storage: device scan complete
    [   28.271014] scsi 2:0:0:0: Direct-Access     WD       3200BMV External 1.05 PQ: 0 ANSI: 4
    [   28.272600] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [   28.273473] sd 2:0:0:0: [sdb] Write Protect is off
    [   28.273477] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
    [   28.273481] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [   28.274470] sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [   28.275350] sd 2:0:0:0: [sdb] Write Protect is off
    [   28.275354] sd 2:0:0:0: [sdb] Mode Sense: 21 00 00 00
    [   28.275357] sd 2:0:0:0: [sdb] Assuming drive cache: write through
    [   28.275362]  sdb:<6>input: PC Speaker as /devices/platform/pcspkr/input/input2
    [   30.201448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [   30.308322] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   30.393636] iTCO_vendor_support: vendor-support=0
    [   30.504499] Linux agpgart interface v0.102
    [   30.603126] input: Power Button (FF) as /devices/virtual/input/input3
    [   30.642750] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
    [   30.642849] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x0860)
    [   30.642887] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [   30.666731] ACPI: Power Button (FF) [PWRF]
    [   30.666846] input: Lid Switch as /devices/virtual/input/input4
    [   30.701550] ACPI: Lid Switch [LID]
    [   30.701613] input: Power Button (CM) as /devices/virtual/input/input5
    [   30.762567] ACPI: Power Button (CM) [PWRB]
    [   30.762631] input: Sleep Button (CM) as /devices/virtual/input/input6
    [   30.813203] intel_rng: FWH not detected
    [   30.826471] ACPI: Sleep Button (CM) [SLPB]
    [   30.826487] asus-laptop: Asus Laptop Support version 0.42
    [   30.826720] asus-laptop:   F3JC model detected
    [   30.830167] Registered led device: asus:touchpad
    [   30.908502] ricoh-mmc: Ricoh MMC Controller disabling driver
    [   30.908506] ricoh-mmc: Copyright(c) Philip Langdale
    [   30.908552] ricoh-mmc: Ricoh MMC controller found at 0000:06:01.2 [1180:0843] (rev 1)
    [   30.908564] ricoh-mmc: Controller is now disabled.
    [   31.113476] sdhci: Secure Digital Host Controller Interface driver
    [   31.113479] sdhci: Copyright(c) Pierre Ossman
    [   31.113527] sdhci: SDHCI controller found at 0000:06:01.1 [1180:0822] (rev 19)
    [   31.113548] ACPI: PCI Interrupt 0000:06:01.1[B] -> GSI 17 (level, low) -> IRQ 17
    [   31.113568] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
    [   31.113622] mmc0: SDHCI at 0xfeaff400 irq 17 DMA
    [   31.224926] ACPI: AC Adapter [AC0] (on-line)
    [   31.346093] ACPI: Battery Slot [BAT0] (battery present)
    [   31.407925] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:14/LNXVIDEO:00/input/input7
    [   31.466477] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    [   31.637974] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
    [   31.637978] iwl3945: Copyright(c) 2003-2007 Intel Corporation
    [   31.638128] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    [   31.638143] PCI: Setting latency timer of device 0000:03:00.0 to 64
    [   31.638166] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
    [   31.779065] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
    [   31.788349] usbcore: registered new interface driver hiddev
    [   31.802683] input: Genius       NetScroll+Mini Traveler as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input8
    [   31.802747] Bluetooth: Core ver 2.11
    [   31.822821] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
    [   31.835123] NET: Registered protocol family 31
    [   31.835126] Bluetooth: HCI device and connection manager initialized
    [   31.835131] Bluetooth: HCI socket layer initialized
    [   31.857029] input,hidraw0: USB HID v1.10 Mouse [Genius       NetScroll+Mini Traveler] on usb-0000:00:1d.1-1
    [   31.857052] usbcore: registered new interface driver usbhid
    [   31.857056] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    [   31.927855] Linux video capture interface: v2.00
    [   31.957960] Bluetooth: HCI USB driver ver 2.9
    [   31.960297] usbcore: registered new interface driver hci_usb
    [   31.975604] stk11xx: Syntek USB2.0 webcam driver startup
    [   31.975639] stk11xx: Syntek USB2.0 - STK-1135 based webcam found.
    [   31.975642] stk11xx: Syntek AVStream USB2.0 1.3M WebCam - Product ID 0x0501.
    [   31.975645] stk11xx: Release: 0005
    [   31.975647] stk11xx: Number of interfaces : 1
    [   31.977343] stk11xx: Initialize USB2.0 Syntek Camera
    [   32.005482] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
    [   32.005517] PCI: Setting latency timer of device 0000:00:1b.0 to 64
    [   32.177387]  sdb1
    [   32.177468] sd 2:0:0:0: [sdb] Attached SCSI disk
    [   32.177518] sd 2:0:0:0: Attached scsi generic sg2 type 0
    [   32.222541] stk11xx: Syntek USB2.0 Camera is ready
    [   32.222583] stk11xx: Syntek USB2.0 Camera is now controlling video device /dev/video0
    [   32.222616] usbcore: registered new interface driver usb_stk11xx_driver
    [   32.222620] stk11xx: v1.3.1 : Syntek USB Video Camera
    [   32.871473] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
    [   32.874259] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
    [   33.191413] lp: driver loaded but no devices found
    [   33.296135] Adding 1429744k swap on /dev/sda7.  Priority:-1 extents:1 across:1429744k
    [   33.840154] EXT3 FS on sda6, internal journal
    [   34.951637] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   35.410199] No dock devices found.
    [   35.736921] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070126]
    [   35.736942] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PSS] (Node f7c24c48), AE_AML_PACKAGE_LIMIT
    [   35.736991] ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126]
    [   35.737188] ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFD) is beyond end of object [20070126]
    [   35.737206] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PSS] (Node f7c24e58), AE_AML_PACKAGE_LIMIT
    [   35.737255] ACPI Exception (processor_perflib-0234): AE_AML_PACKAGE_LIMIT, Evaluating _PSS [20070126]
    [   36.466584] apm: BIOS not found.
    [   36.602476] ppdev: user-space parallel port driver
    [   36.719279] audit(1252747643.643:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5291 profile="/usr/sbin/cupsd" namespace="default"
    [   38.419332] r8169: eth0: link up
    [   38.419345] r8169: eth0: link up
    [   38.430404] Bluetooth: L2CAP ver 2.9
    [   38.430409] Bluetooth: L2CAP socket layer initialized
    [   38.507914] Bluetooth: RFCOMM socket layer initialized
    [   38.507930] Bluetooth: RFCOMM TTY layer initialized
    [   38.507932] Bluetooth: RFCOMM ver 1.8
    [   41.589079] NET: Registered protocol family 17
    [   47.730522] NET: Registered protocol family 10
    [   47.730791] lo: Disabled Privacy Extensions
    [   47.731704] ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [   58.000598] eth0: no IPv6 routers present
    [   62.280054] CPU0 attaching NULL sched-domain.
    [   62.280068] CPU1 attaching NULL sched-domain.
    [   62.302995] CPU0 attaching sched-domain:
    [   62.303004]  domain 0: span 03
    [   62.303007]   groups: 01 02
    [   62.303015] CPU1 attaching sched-domain:
    [   62.303018]  domain 0: span 03
    [   62.303020]   groups: 02 01
    [ 3573.375382] UDF-fs: No VRS found
    [ 3573.387954] ISO 9660 Extensions: Microsoft Joliet Level 1
    [ 3573.387982] ISOFS: changing to secondary root
    [ 3627.538500] UDF-fs: Partition marked readonly; forcing readonly mount
    [ 3627.598377] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'DVD_VIDEO', timestamp 2009/09/11 20:29 (1078)
    [ 3630.306041] attempt to access beyond end of device
    [ 3630.306054] sr0: rw=0, want=2098424, limit=2097151
    [ 3630.306058] Buffer I/O error on device sr0, logical block 524605
    [ 3630.306065] attempt to access beyond end of device
    [ 3630.306069] sr0: rw=0, want=2098428, limit=2097151
    [ 3630.306072] Buffer I/O error on device sr0, logical block 524606
    [ 3630.306080] attempt to access beyond end of device
    [ 3630.306085] sr0: rw=0, want=2098432, limit=2097151
    [ 3630.306090] Buffer I/O error on device sr0, logical block 524607
    [ 3630.306095] attempt to access beyond end of device
    [ 3630.306099] sr0: rw=0, want=2098436, limit=2097151
    [ 3630.306104] Buffer I/O error on device sr0, logical block 524608
    [ 3630.306111] attempt to access beyond end of device
    [ 3630.306116] sr0: rw=0, want=2098440, limit=2097151
    [ 3630.306120] Buffer I/O error on device sr0, logical block 524609
    [ 3630.306125] attempt to access beyond end of device
    [ 3630.306130] sr0: rw=0, want=2098444, limit=2097151
    [ 3630.306134] Buffer I/O error on device sr0, logical block 524610
    [ 3630.306144] attempt to access beyond end of device
    [ 3630.306148] sr0: rw=0, want=2098448, limit=2097151
    [ 3630.306153] Buffer I/O error on device sr0, logical block 524611
    [ 3630.306158] attempt to access beyond end of device
    [ 3630.306163] sr0: rw=0, want=2098452, limit=2097151
    [ 3630.306168] Buffer I/O error on device sr0, logical block 524612
    [ 3630.306174] attempt to access beyond end of device
    [ 3630.306179] sr0: rw=0, want=2098424, limit=2097151
    [ 3630.306183] Buffer I/O error on device sr0, logical block 524605
    [ 3630.306188] attempt to access beyond end of device
    [ 3630.306193] sr0: rw=0, want=2098428, limit=2097151
    [ 3630.306197] Buffer I/O error on device sr0, logical block 524606
    [ 3630.306210] attempt to access beyond end of device
    [ 3630.306214] sr0: rw=0, want=2098424, limit=2097151
    [ 3630.306220] attempt to access beyond end of device
    [ 3630.306224] sr0: rw=0, want=2098428, limit=2097151
    [ 3630.306240] attempt to access beyond end of device
    [ 3630.306245] sr0: rw=0, want=2098424, limit=2097151
    [ 3630.306250] attempt to access beyond end of device
    [ 3630.306264] sr0: rw=0, want=2098428, limit=2097151
    [ 3630.306805] attempt to access beyond end of device
    [ 3630.306809] sr0: rw=0, want=4195572, limit=2097151
    [ 3630.306813] attempt to access beyond end of device
    [ 3630.306817] sr0: rw=0, want=4195576, limit=2097151
    [ 3630.306822] attempt to access beyond end of device
    [ 3630.306825] sr0: rw=0, want=4195580, limit=2097151
    [ 3630.306828] attempt to access beyond end of device
    [ 3630.306831] sr0: rw=0, want=4195584, limit=2097151
    [ 3630.306836] attempt to access beyond end of device
    [ 3630.306839] sr0: rw=0, want=4195588, limit=2097151
    [ 3630.306842] attempt to access beyond end of device
    [ 3630.306844] sr0: rw=0, want=4195592, limit=2097151
    [ 3630.306848] attempt to access beyond end of device
    [ 3630.306851] sr0: rw=0, want=4195596, limit=2097151
    [ 3630.306854] attempt to access beyond end of device
    [ 3630.306857] sr0: rw=0, want=4195600, limit=2097151
    [ 3630.306861] attempt to access beyond end of device
    [ 3630.306864] sr0: rw=0, want=4195572, limit=2097151
    [ 3630.306866] attempt to access beyond end of device
    [ 3630.306869] sr0: rw=0, want=4195576, limit=2097151
    [ 3630.306875] attempt to access beyond end of device
    [ 3630.306878] sr0: rw=0, want=4195572, limit=2097151
    [ 3630.306881] attempt to access beyond end of device
    [ 3630.306884] sr0: rw=0, want=4195576, limit=2097151
    [ 3630.306893] attempt to access beyond end of device
    [ 3630.306896] sr0: rw=0, want=4195572, limit=2097151
    [ 3630.306898] attempt to access beyond end of device
    [ 3630.306901] sr0: rw=0, want=4195576, limit=2097151
    [ 3630.307512] attempt to access beyond end of device
    [ 3630.307515] sr0: rw=0, want=6292720, limit=2097151
    [ 3630.307519] attempt to access beyond end of device
    [ 3630.307522] sr0: rw=0, want=6292724, limit=2097151
    [ 3630.307527] attempt to access beyond end of device
    [ 3630.307530] sr0: rw=0, want=6292728, limit=2097151
    [ 3630.307533] attempt to access beyond end of device
    [ 3630.307536] sr0: rw=0, want=6292732, limit=2097151
    [ 3630.307540] attempt to access beyond end of device
    [ 3630.307543] sr0: rw=0, want=6292736, limit=2097151
    [ 3630.307546] attempt to access beyond end of device
    [ 3630.307548] sr0: rw=0, want=6292740, limit=2097151
    [ 3630.307553] attempt to access beyond end of device
    [ 3630.307555] sr0: rw=0, want=6292744, limit=2097151
    [ 3630.307558] attempt to access beyond end of device
    [ 3630.307561] sr0: rw=0, want=6292748, limit=2097151
    [ 3630.307564] attempt to access beyond end of device
    [ 3630.307567] sr0: rw=0, want=6292720, limit=2097151
    [ 3630.307570] attempt to access beyond end of device
    [ 3630.307572] sr0: rw=0, want=6292724, limit=2097151
    [ 3630.307578] attempt to access beyond end of device
    [ 3630.307582] sr0: rw=0, want=6292720, limit=2097151
    [ 3630.307584] attempt to access beyond end of device
    [ 3630.307587] sr0: rw=0, want=6292724, limit=2097151
    [ 3630.307597] attempt to access beyond end of device
    [ 3630.307600] sr0: rw=0, want=6292720, limit=2097151
    [ 3630.307603] attempt to access beyond end of device
    [ 3630.307606] sr0: rw=0, want=6292724, limit=2097151
    [ 3630.308235] attempt to access beyond end of device
    [ 3630.308239] sr0: rw=0, want=8389868, limit=2097151
    [ 3630.308243] attempt to access beyond end of device
    [ 3630.308245] sr0: rw=0, want=8389872, limit=2097151
    [ 3630.308250] attempt to access beyond end of device
    [ 3630.308254] sr0: rw=0, want=8389876, limit=2097151
    [ 3630.308257] attempt to access beyond end of device
    [ 3630.308260] sr0: rw=0, want=8389880, limit=2097151
    [ 3630.308266] attempt to access beyond end of device
    [ 3630.308269] sr0: rw=0, want=8389884, limit=2097151
    [ 3630.308272] attempt to access beyond end of device
    [ 3630.308274] sr0: rw=0, want=8389888, limit=2097151
    [ 3630.308278] attempt to access beyond end of device
    [ 3630.308281] sr0: rw=0, want=8389892, limit=2097151
    [ 3630.308284] attempt to access beyond end of device
    [ 3630.308287] sr0: rw=0, want=8389896, limit=2097151
    [ 3630.308291] attempt to access beyond end of device
    [ 3630.308293] sr0: rw=0, want=8389868, limit=2097151
    [ 3630.308296] attempt to access beyond end of device
    [ 3630.308298] sr0: rw=0, want=8389872, limit=2097151
    [ 3630.308305] attempt to access beyond end of device
    [ 3630.308308] sr0: rw=0, want=8389868, limit=2097151
    [ 3630.308310] attempt to access beyond end of device
    [ 3630.308313] sr0: rw=0, want=8389872, limit=2097151
    [ 3630.308322] attempt to access beyond end of device
    [ 3630.308326] sr0: rw=0, want=8389868, limit=2097151
    [ 3630.308329] attempt to access beyond end of device
    [ 3630.308332] sr0: rw=0, want=8389872, limit=2097151
    [ 3815.307060] UDF-fs: Partition marked readonly; forcing readonly mount
    [ 3815.367022] UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'DORA_PIRATEADV_EU_AU', timestamp 2005/12/21 05:51 (1078)
    [ 4933.934442] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
    Thanks a bunch for your help.
    Google is my friend. Saves my butt every time (well most times).

  10. #10
    Join Date
    Oct 2007
    Beans
    Hidden!

    Re: DVD playback Hardy 8.04

    well, I think you can tell yourself from that log there is a problem
    i've seen those " Buffer I/O error on device sr0" in countless bug reports, with solutions ranging from updating the DVD firmware, to upgrading to a newer kernel, to booting with the cd drive open (I kid you not) and changing IDE channel or settings,

    Too many possible causes and solution that i could give you a straightforward answer Im afraid. Have a look here:
    https://bugs.launchpad.net/ubuntu/+s...ux/+bug/266951

    and everywhere else when you google "Buffer I/O error on device sr0".

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •