Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: [SOLVED] USB: device not accepting address, new high speed USB device using ehci_hcd.

  1. #1
    Join Date
    May 2007
    Beans
    29

    [SOLVED] USB: device not accepting address, new high speed USB device using ehci_hcd.

    I'm getting the following in a loop inside dmesg. What can I do? I have no idea where to start.


    Code:
    [  109.248889] usb 4-4: device descriptor read/64, error -71
    [  109.464033] usb 4-4: device descriptor read/64, error -71
    [  109.679679] usb 4-4: new high speed USB device using ehci_hcd and address 21
    [  110.086994] usb 4-4: device not accepting address 21, error -71
    [  110.199317] usb 4-4: new high speed USB device using ehci_hcd and address 22
    [  110.607133] usb 4-4: device not accepting address 22, error -71
    [  110.881679] usb 4-4: new high speed USB device using ehci_hcd and address 23
    [  110.993818] usb 4-4: device descriptor read/64, error -71
    [  111.209143] usb 4-4: device descriptor read/64, error -71
    [  111.424775] usb 4-4: new high speed USB device using ehci_hcd and address 24
    [  111.538083] usb 4-4: device descriptor read/64, error -71
    [  111.752229] usb 4-4: device descriptor read/64, error -71
    [  111.967892] usb 4-4: new high speed USB device using ehci_hcd and address 25
    [  112.375194] usb 4-4: device not accepting address 25, error -71

  2. #2
    Join Date
    May 2007
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: USB: device not accepting address, new high speed USB device using ehci_hcd... lo

    Try unloading the ehci_hcd module
    Code:
    sudo rmmod ehci_hcd
    This sometimes happens with USB2, though I'm not sure why or when exactly.

  3. #3
    Join Date
    May 2007
    Beans
    29

    Re: USB: device not accepting address, new high speed USB device using ehci_hcd... lo

    just switched it over to uhci:

    Code:
    [  225.574244] hub 4-0:1.0: cannot disable port 4 (err = -19)
    [  225.574252] hub 4-0:1.0: cannot disable port 4 (err = -19)
    [  225.574261] usb 4-6: USB disconnect, address 7
    [  225.579303] ehci_hcd 0000:00:1a.7: USB bus 4 deregistered
    [  225.580585] ACPI: PCI interrupt for device 0000:00:1a.7 disabled
    [  225.857765] usb 3-2: new full speed USB device using uhci_hcd and address 2
    [  226.025110] usb 3-2: configuration #1 chosen from 1 choice
    [  226.028734] scsi9 : SCSI emulation for USB Mass Storage devices
    [  226.028959] usb-storage: device found at 2
    [  226.028961] usb-storage: waiting for device to settle before scanning
    [  226.265088] usb 2-2: new full speed USB device using uhci_hcd and address 2
    [  226.385887] usb 2-2: device descriptor read/64, error -71
    [  226.608517] usb 2-2: device descriptor read/64, error -71
    [  226.824163] usb 2-2: new full speed USB device using uhci_hcd and address 3
    [  226.943963] usb 2-2: device descriptor read/64, error -71
    [  227.168584] usb 2-2: device descriptor read/64, error -71

  4. #4
    Join Date
    May 2007
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: USB: device not accepting address, new high speed USB device using ehci_hcd... lo

    What device are you trying to plug in here? Is it a flash drive, an external hard disk, a printer? Have you tried unplugging the device's cables and then reconnecting them (I know, sounds silly)?

  5. #5
    Join Date
    May 2007
    Beans
    29

    Re: USB: device not accepting address, new high speed USB device using ehci_hcd... lo

    between messages i determined it was the 4 port hub on my dell screen. i unplugged it and the messages stopped. i plugged in back in and so far so good.

    for anyone searching, this started when xwin crashed and ubuntu forced me into a reboot for an unknown reason. i turned the computer off and it had no effect on the problem. if this happens again, i'll try shutting the power to the screen off as well.

    actual cause is still unknown, i guess?

  6. #6
    Join Date
    Mar 2007
    Beans
    57

    Re: [SOLVED] USB: device not accepting address, new high speed USB device using ehci_

    Thanks Rocketman. I had the same problem, your ehci_hcd line has solved my usb woes.

    Rockon dude!

  7. #7
    Join Date
    Jun 2007
    Beans
    11

    Re: [SOLVED] USB: device not accepting address, new high speed USB device using ehci_

    Thanks a lot Rocket2DMn. I was having problem with a mp3 player and with your line its fixed now, really awesome!!

  8. #8
    Join Date
    Nov 2008
    Beans
    11
    Distro
    Kubuntu 9.04 Jaunty Jackalope

    Re: USB: device not accepting address, new high speed USB device using ehci_hcd... lo

    the same were here w/ kubuntu 8.04 athlon dual core 64, but not anymore thanks to your fix Rocket2DMn!
    great hint tnx a lot!

  9. #9
    Join Date
    Dec 2005
    Beans
    10

    Re: [SOLVED] USB: device not accepting address, new high speed USB device using ehci_

    I don't mean to be a party-pooper, but doesn't removing ehci_hcd also prevent you from using USB at high-speed?

    Note that I have the exact same problem you guys have, and I had it already since Hardy. I either have to choose between loading ehci_hcd (in which case some devices won't work), or limiting myself to uhci_hcd (where everything works but is limited to sloooow USB 1.1 speeds...)

    I see lots of reports about this problem in the forums and in Launchpad. I think the Ubuntu kernel devs should dignify us with a better answer than "wait for 9.10" (because it seems the 9.04 alpha also suffers from this same problem).

    Cheers,
    A not so happy Ubuntero

  10. #10
    Join Date
    Mar 2008
    Location
    Vancouver, Canada
    Beans
    1
    Distro
    Ubuntu 8.04 Hardy Heron

    Re: [SOLVED] USB: device not accepting address, new high speed USB device using ehci_

    I'm having the same problem as everyone else - mine is that I can't seem to get a webcam going (either Logitech 9000 or QuickCam Communicate Deluxe). I gave the 9000 back, hoping it would solve the problem.

    Does anyone have a recommendation for a webcam that will work out of the box?

    This is SO frustrating!

    Gee, maybe I should give some money to the development effort - maybe that will get their attention.

    - Randy

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •