Page 28 of 121 FirstFirst ... 1826272829303878 ... LastLast
Results 271 to 280 of 1210

Thread: Comprehensive ndiswrapper troubleshooting guide

  1. #271
    Join Date
    May 2007
    Location
    London UK
    Beans
    94
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Comprehensive ndiswrapper troubleshooting guide

    Hello pytheas22: Thanks for your how-to guide.

    I have followed it diligently and still cannot get my PC and laptop to connect to a recently purchased wireless router "Netgear wireless router" (WNB100) using the USB wireless adapter that came with it.

    I am at my wits end, bearing in mind I have been working on this since Dec 24th when I bought my laptop HP Pavillion DV-7 1132nr which came with windows Vista.
    I exorcised the laptop of Microsoft and loaded Ubuntu intrepid which I also have on my desktop at home.

    The wifi worked using vista on the laptop, but since loading ubuntu I can't seem to get a wifi connection on laptop.

    I am able to connect laptop and desktop to the internet using a wired ethernet cable via the purchased Netgear wireless router (WNB100). The router was bundled with a wireless USB adapter driver version (WNV11v2) which I have problems getting to lap/desktop to work with.

    The windows CD that came with it uses the netgear WN111v2 drivers which I was able to unpack the .exe file under windows xp at work and retrieve the relevant .inf and .sys files using an application called universal-unpacker.

    I have installed Ndisgtk and installed the relevant windows drivers -see attachment below for details



    However there is another driver calleed arusb_hl.inf which ndisgtk also loads and gives a similar message as device present. These are the only two drivers from the unpacked .exe files that it recognises.




    when i click on configure network i get "Could not find a network configuration tool" This is the cae for both options of drivers loaded.



    I also get the following messages whilst following your tutorial -

    albert@albert-desktop:~$ lsusb
    Bus 005 Device 006: ID 0781:9191 SanDisk Corp. ImageMate CF
    Bus 005 Device 005: ID 0846:9001 NetGear, Inc.
    Bus 005 Device 003: ID 090c:1000 Feiya Technology Corp. Memory Bar
    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 002: ID 0a81:0101 Chesen Electronics Corp. Keyboard
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 005: ID 047d:1012 Kensington PocketMouse
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


    then:
    albert@albert-desktop:~$ ndiswrapper -l
    arusb_xp : driver installed
    device (0846:9001) present

    Which believe to be correct.

    more messages from shell -

    albert@albert-desktop:~$ sudo lshw -C Network
    [sudo] password for albert:
    *-network
    description: Ethernet interface
    product: 82562EZ 10/100 Ethernet Controller
    vendor: Intel Corporation
    physical id: 8
    bus info: pci@0000:01:08.0
    logical name: eth2
    version: 02
    serial: 00:0c:76:6a:8d:68
    size: 100MB/s
    capacity: 100MB/s
    width: 32 bits
    clock: 33MHz
    capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
    configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.23-k4-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=32 link=yes maxlatency=56 mingnt=8 module=e100 multicast=yes port=MII speed=100MB/s
    *-network DISABLED
    description: Ethernet interface
    physical id: 1
    logical name: pan0
    serial: c2:f1:6d:0f:36:1a
    capabilities: ethernet physical
    configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
    ================================================== ==========================

    I blacklisted the bridge driver but when i did the same for e100 i lost my ethernet connect, so i have to remove it from the blaklist)


    ================================================== =========================

    and ...
    ================================================== ===================
    albert@albert-desktop:~$ lsmod | grep ndis
    ndiswrapper 196380 0
    usbcore 149360 7 ndiswrapper,usb_storage,libusual,usbhid,ehci_hcd,u hci_hcd
    albert@albert-desktop:~$ dmesg | grep -e ndis -e wlan
    [ 14.688241] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 15.158764] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateReceiveNetBufferLists'
    [ 15.158831] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferList'
    [ 15.158905] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBuffer'
    [ 15.158976] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferList'
    [ 15.159047] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBuffer'
    [ 15.159117] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeMdl'
    [ 15.159198] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisOpenConfigurationEx'
    [ 15.159272] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSendNetBufferListsComplete'
    [ 15.159344] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMOidRequestComplete'
    [ 15.159419] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMIndicateStatusEx'
    [ 15.159501] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMSetMiniportAttributes'
    [ 15.159581] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMDeregisterMiniportDriver'
    [ 15.159654] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMRegisterMiniportDriver'
    [ 15.159766] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferListPool'
    [ 15.159840] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateIoWorkItem'
    [ 15.159925] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateMemoryWithTagPriority'
    [ 15.160049] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisGetSystemUpTimeEx'
    [ 15.160121] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferListPool'
    [ 15.160192] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisQueueIoWorkItem'
    [ 15.160272] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeNetBufferPool'
    [ 15.160344] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisAllocateNetBufferPool'
    [ 15.160415] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisFreeIoWorkItem'
    [ 15.160485] ndiswrapper (import:242): unknown symbol: NDIS.SYS:'NdisMResetComplete'
    [ 15.160553] ndiswrapper (import:242): unknown symbol: WDFLDR.SYS:'WdfVersionBind'
    [ 15.160620] ndiswrapper (import:242): unknown symbol: WDFLDR.SYS:'WdfVersionUnbind'
    [ 15.160682] ndiswrapper (load_sys_files:206): couldn't prepare driver 'arusb_lh'
    [ 15.163767] ndiswrapper (load_wrap_driver:108): couldn't load driver arusb_lh; check system log for messages from 'loadndisdriver'
    [ 15.163896] usbcore: registered new interface driver ndiswrapper
    [ 717.503045] usbcore: deregistering interface driver ndiswrapper
    [ 717.503527] ndiswrapper (ntoskernel_exit:2671): object f7918120(2) was not freed, freeing it now
    [ 717.533076] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 717.551749] usbcore: registered new interface driver ndiswrapper
    [ 764.550167] usbcore: deregistering interface driver ndiswrapper
    [ 764.579216] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 764.602641] usbcore: registered new interface driver ndiswrapper
    [ 779.980963] usbcore: deregistering interface driver ndiswrapper
    [ 780.016481] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 780.037672] usbcore: registered new interface driver ndiswrapper
    [ 791.529378] usbcore: deregistering interface driver ndiswrapper
    [ 791.559280] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 791.580993] usbcore: registered new interface driver ndiswrapper
    [ 810.146747] usbcore: deregistering interface driver ndiswrapper
    [ 810.175415] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [ 810.484325] ndiswrapper (import:242): unknown symbol: ntoskrnl.exe:'NlsMbCodePageTag'
    [ 810.484559] ndiswrapper (load_sys_files:206): couldn't prepare driver 'arusb_xp'
    [ 810.487784] ndiswrapper (load_wrap_driver:108): couldn't load driver arusb_xp; check system log for messages from 'loadndisdriver'
    [ 810.487855] usbcore: registered new interface driver ndiswrapper

    =========================
    more..
    =============================
    albert@albert-desktop:~$ lsmod | grep ndis
    ndiswrapper 196380 0
    usbcore 149360 7 ndiswrapper,usb_storage,libusual,usbhid,ehci_hcd,u hci_hcd

    ===============================================
    albert@albert-desktop:~$ lspci
    00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
    00:02.0 VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)
    00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
    00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
    00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    01:08.0 Ethernet controller: Intel Corporation 82562EZ 10/100 Ethernet Controller (rev 02)
    ================================================== =======

    I hope the above is enough for you to go on at the moment. I have blacklisted certain files and as mentioned earlier followed every step of you tutorial to the end. Not sure what next to do.

    My pc runs an intel P4 2.4 ghz and the architecture is i686 running ubuntu 32 bit.

    Cheers Albert
    Attached Images Attached Images

  2. #272
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    etherealethel: it looks like you have some major packet-loss issues, which explains the slow connection. Let's see if we can figure out a better driver for you. It looks like your card has an rt73 chipset (were you using ndiswrapper at all or was this just the default driver that ships with Ubuntu?), but please post the output of these commands to confirm:

    Code:
    lsusb
    ndiswrapper -l
    uname -rm
    Also, if you plug into ethernet (if possible), do you have any connection problems (don't worry about testing this if it's a hassle to connect your machine via the wire)?

    murlig: yes, I couldn't get 1.48 to compile on my Ubuntu 8.10 system either, even with the patch. Unfortunately I don't know enough to be able to fix it.

    I have to admit that I'm also out of ideas for your situation. I think you might be better off using 8.04 until either the native libertas driver supports your card or the next version of Ubuntu is released in April...

  3. #273
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    mixtri: it looks like ndiswrapper doesn't like the Windows driver that you tried to load into it--hence all the errors in dmesg about 'unknown symbol...'.

    I googled around and found this thread, where someone in post #8 links to a driver that he says works for your card. Please give that driver a try. To uninstall the bad one and install the one that's purported to work, please first download the netmw345.tar.gz file from this link and save it to your desktop. Then run:

    Code:
    sudo ndiswrapper -r arusb_xp
    cd ~/Desktop
    tar -xzvf netmw245.tar.gz
    cd netmw245
    sudo ndiswrapper -i netmw245.inf
    Then please reboot and see if this works. If not, please post the output of:
    Code:
    dmesg | grep -e ndis
    ndiswrapper -l
    Last edited by pytheas22; January 21st, 2009 at 12:12 AM.

  4. #274
    Join Date
    May 2007
    Location
    London UK
    Beans
    94
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Comprehensive ndiswrapper troubleshooting guide

    Thanks for you help, I hsall try that when I get home this evening, currently at work. hehe. Looks like another sleepless night for me again.

    Will be in touch. And thanks again.

  5. #275
    Join Date
    Dec 2008
    Beans
    24

    Re: Comprehensive ndiswrapper troubleshooting guide

    Hello again Pytheus - and many thanks for your continued support!

    I am not using ndiswrapper as the adaptor initially worked fine with the Ubuntu driver, so it is not loaded atm - the adaptor is the Dlink DWL-G122 AirPlus G wireless adaptor ver 3.00

    I have moved the PC back upstairs so can't use ethernet cable, but it all worked fine when it was wired up...

    Here is the output requested...
    lisa@lisa-Ubuntu-desktop:~$ lsusb
    Bus 002 Device 002: ID 07d1:3c03 D-Link System DWL-G122 802.11g Adapter [ralink rt73]
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    lisa@lisa-Ubuntu-desktop:~$ uname -rm
    2.6.27-9-generic i686

  6. #276
    Join Date
    Jan 2009
    Beans
    17
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Comprehensive ndiswrapper troubleshooting guide

    Quote Originally Posted by pytheas22 View Post
    AMTQ: the password that you enter should be just to unlock encryption keys so that Network Manager can use them to connect. It shouldn't affect the device itself. But I guess something weird could be happening. You might want to see if you have better luck using wicd, which won't prompt you for passwords. Unfortunately I don't know of any way to grant Network Manager permanent access, without prompting for passwords.

    I'm more inclined to believe that the issue lies at a lower level than Network Manager, however. Could you please post the output of the following commands, once when the device is connected before you turn on the computer, and once when you plug it in after the computer boots:
    Code:
    dmesg
    lsusb
    It will be pretty long, but useful.
    pytheas22:

    I tried wicd but it didn't work at all, so I switched back to the Network-Manager because at least it works most of the time...

    Here is what I got (before using wicd ):


    Device connected before boot
    Code:
    [    0.569622] tracer: 772 pages allocated for 65536 entries of 48 bytes
    [    0.569625]    actual entries 65620
    [    0.569744] AppArmor: AppArmor Filesystem Enabled
    [    0.569771] ACPI: RTC can wake from S4
    [    0.572044] Switched to high resolution mode on CPU 0
    [    0.572200] Switched to high resolution mode on CPU 1
    [    0.576028] system 00:01: ioport range 0x1000-0x107f has been reserved
    [    0.576031] system 00:01: ioport range 0x1080-0x10ff has been reserved
    [    0.576033] system 00:01: ioport range 0x1400-0x147f has been reserved
    [    0.576036] system 00:01: ioport range 0x1480-0x14ff has been reserved
    [    0.576039] system 00:01: ioport range 0x1800-0x187f has been reserved
    [    0.576042] system 00:01: ioport range 0x1880-0x18ff has been reserved
    [    0.576048] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
    [    0.576051] system 00:02: ioport range 0x800-0x87f has been reserved
    [    0.576054] system 00:02: ioport range 0x290-0x297 has been reserved
    [    0.576067] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved
    [    0.576073] system 00:0e: iomem range 0xd2800-0xd3fff has been reserved
    [    0.576076] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
    [    0.576079] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
    [    0.576082] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
    [    0.576085] system 00:0e: iomem range 0xfefff000-0xfefff0ff could not be reserved
    [    0.576088] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
    [    0.576091] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
    [    0.576094] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    [    0.576097] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
    [    0.576100] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.576103] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
    [    0.576106] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
    [    0.576109] system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved
    [    0.576112] system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved
    [    0.576116] system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved
    [    0.611325] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
    [    0.611327] pci 0000:00:06.0:   IO window: disabled
    [    0.611331] pci 0000:00:06.0:   MEM window: 0xfde00000-0xfdefffff
    [    0.611334] pci 0000:00:06.0:   PREFETCH window: disabled
    [    0.611338] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
    [    0.611340] pci 0000:00:0a.0:   IO window: 0x9000-0x9fff
    [    0.611343] pci 0000:00:0a.0:   MEM window: 0xfa000000-0xfcffffff
    [    0.611347] pci 0000:00:0a.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
    [    0.611351] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:03
    [    0.611353] pci 0000:00:0e.0:   IO window: 0x7000-0x8fff
    [    0.611356] pci 0000:00:0e.0:   MEM window: 0xfdd00000-0xfddfffff
    [    0.611359] pci 0000:00:0e.0:   PREFETCH window: disabled
    [    0.611367] pci 0000:00:06.0: setting latency timer to 64
    [    0.611372] pci 0000:00:0a.0: setting latency timer to 64
    [    0.611377] pci 0000:00:0e.0: setting latency timer to 64
    [    0.611380] bus: 00 index 0 io port: [0, ffff]
    [    0.611382] bus: 00 index 1 mmio: [0, ffffffff]
    [    0.611384] bus: 01 index 0 mmio: [0, 0]
    [    0.611386] bus: 01 index 1 mmio: [fde00000, fdefffff]
    [    0.611388] bus: 01 index 2 mmio: [0, 0]
    [    0.611390] bus: 01 index 3 io port: [0, ffff]
    [    0.611392] bus: 01 index 4 mmio: [0, ffffffff]
    [    0.611394] bus: 02 index 0 io port: [9000, 9fff]
    [    0.611396] bus: 02 index 1 mmio: [fa000000, fcffffff]
    [    0.611399] bus: 02 index 2 mmio: [e0000000, efffffff]
    [    0.611401] bus: 02 index 3 mmio: [0, 0]
    [    0.611403] bus: 03 index 0 io port: [7000, 8fff]
    [    0.611405] bus: 03 index 1 mmio: [fdd00000, fddfffff]
    [    0.611407] bus: 03 index 2 mmio: [0, 0]
    [    0.611409] bus: 03 index 3 mmio: [0, 0]
    [    0.611420] NET: Registered protocol family 2
    [    0.624054] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.624315] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.624820] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.625068] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.625071] TCP reno registered
    [    0.632076] NET: Registered protocol family 1
    [    0.632186] checking if image is initramfs... it is
    [    1.262910] Freeing initrd memory: 8005k freed
    [    1.263961] audit: initializing netlink socket (disabled)
    [    1.263979] type=2000 audit(1232643347.261:1): initialized
    [    1.269503] highmem bounce pool size: 64 pages
    [    1.269509] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    1.272185] VFS: Disk quotas dquot_6.5.1
    [    1.272277] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    1.272382] msgmni has been set to 1743
    [    1.272499] io scheduler noop registered
    [    1.272501] io scheduler anticipatory registered
    [    1.272503] io scheduler deadline registered
    [    1.272514] io scheduler cfq registered (default)
    [    1.289063] pci 0000:00:05.0: Enabling HT MSI Mapping
    [    1.289079] pci 0000:00:05.1: Enabling HT MSI Mapping
    [    1.289094] pci 0000:00:05.2: Enabling HT MSI Mapping
    [    1.289108] pci 0000:00:06.0: Enabling HT MSI Mapping
    [    1.289124] pci 0000:00:06.1: Enabling HT MSI Mapping
    [    1.289141] pci 0000:00:08.0: Enabling HT MSI Mapping
    [    1.289157] pci 0000:00:09.0: Enabling HT MSI Mapping
    [    1.289172] pci 0000:00:0a.0: Enabling HT MSI Mapping
    [    1.289188] pci 0000:00:0e.0: Enabling HT MSI Mapping
    [    1.289212] pci 0000:02:00.0: Boot video device
    [    1.289355] pcieport-driver 0000:00:0a.0: setting latency timer to 64
    [    1.289379] pcieport-driver 0000:00:0a.0: found MSI capability
    [    1.289400] pci_express 0000:00:0a.0:pcie00: allocate port service
    [    1.289452] pci_express 0000:00:0a.0:pcie03: allocate port service
    [    1.289533] pcieport-driver 0000:00:0e.0: setting latency timer to 64
    [    1.289556] pcieport-driver 0000:00:0e.0: found MSI capability
    [    1.289573] pci_express 0000:00:0e.0:pcie00: allocate port service
    [    1.289623] pci_express 0000:00:0e.0:pcie03: allocate port service
    [    1.289986] isapnp: Scanning for PnP cards...
    [    1.642393] isapnp: No Plug & Play device found
    [    1.680412] hpet_resources: 0xfefff000 is busy
    [    1.680512] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [    1.680647] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.681362] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.683433] brd: module loaded
    [    1.683510] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [    1.683645] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    1.684028] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.684034] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.684374] mice: PS/2 mouse device common for all mice
    [    1.684518] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.684548] rtc0: alarms up to one year, y3k, hpet irqs
    [    1.684705] EISA: Probing bus 0 at eisa.0
    [    1.684712] Cannot allocate resource for EISA slot 1
    [    1.684724] Cannot allocate resource for EISA slot 7
    [    1.684726] Cannot allocate resource for EISA slot 8
    [    1.684729] EISA: Detected 0 cards.
    [    1.684732] cpuidle: using governor ladder
    [    1.684735] cpuidle: using governor menu
    [    1.685208] TCP cubic registered
    [    1.685232] Using IPI No-Shortcut mode
    [    1.685437] registered taskstats version 1
    [    1.685580]   Magic number: 9:210:945
    [    1.685601] tty ttya0: hash matches
    [    1.685680] tty tty2: hash matches
    [    1.685746] rtc_cmos 00:05: setting system clock to 2009-01-22 16:55:48 UTC (1232643348)
    [    1.685749] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.685751] EDD information not available.
    [    1.685992] Freeing unused kernel memory: 424k freed
    [    1.686050] Write protecting the kernel text: 2576k
    [    1.686087] Write protecting the kernel read-only data: 936k
    [    1.710703] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    1.854359] fuse init (API version 7.9)
    [    1.896195] fan PNP0C0B:00: registered as cooling_device0
    [    1.896203] ACPI: Fan [FAN] (on)
    [    1.908204] processor ACPI0007:00: registered as cooling_device1
    [    1.908270] processor ACPI0007:01: registered as cooling_device2
    [    1.910990] thermal LNXTHERM:01: registered as thermal_zone0
    [    1.911518] ACPI: Thermal Zone [THRM] (40 C)
    [    2.445096] usbcore: registered new interface driver usbfs
    [    2.445122] usbcore: registered new interface driver hub
    [    2.450401] usbcore: registered new device driver usb
    [    2.466861] No dock devices found.
    [    2.480563] SCSI subsystem initialized
    [    2.504180] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.504641] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [    2.504652] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
    [    2.504664] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    2.504667] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    2.504717] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [    2.504739] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [    2.546173] libata version 3.00 loaded.
    [    2.576232] usb usb1: configuration #1 chosen from 1 choice
    [    2.576264] hub 1-0:1.0: USB hub found
    [    2.576275] hub 1-0:1.0: 10 ports detected
    [    2.786141] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [    2.786153] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
    [    2.786168] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [    2.786171] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [    2.786196] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    [    2.786221] ehci_hcd 0000:00:02.1: debug port 1
    [    2.786225] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    [    2.786243] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
    [    2.960026] usb 1-1: new full speed USB device using ohci_hcd and address 2
    [    2.972017] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [    2.972168] usb usb2: configuration #1 chosen from 1 choice
    [    2.972207] hub 2-0:1.0: USB hub found
    [    2.972215] hub 2-0:1.0: 10 ports detected
    [    3.028023] hub 1-0:1.0: unable to enumerate USB device on port 1
    [    3.180555] pata_acpi 0000:00:04.0: setting latency timer to 64
    [    3.180631] sata_nv 0000:00:05.0: version 3.5
    [    3.181083] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [    3.181094] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
    [    3.181097] sata_nv 0000:00:05.0: Using SWNCQ mode
    [    3.181460] sata_nv 0000:00:05.0: setting latency timer to 64
    [    3.181625] scsi0 : sata_nv
    [    3.181919] scsi1 : sata_nv
    [    3.182120] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
    [    3.182123] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
    [    3.636017] usb 2-2: new high speed USB device using ehci_hcd and address 3
    [    3.656055] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.706896] ata1.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [    3.706899] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    3.769258] usb 2-2: configuration #1 chosen from 1 choice
    [    3.773530] ata1.00: configured for UDMA/133
    [    3.880018] usb 2-5: new high speed USB device using ehci_hcd and address 4
    [    4.015046] usb 2-5: configuration #1 chosen from 1 choice
    [    4.248033] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    4.304049] ata2.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [    4.304052] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    4.317013] usb 1-1: new full speed USB device using ohci_hcd and address 3
    [    4.379038] ata2.00: configured for UDMA/133
    [    4.379145] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
    [    4.379281] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
    [    4.380634] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [    4.380645] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
    [    4.380649] sata_nv 0000:00:05.1: Using SWNCQ mode
    [    4.381012] sata_nv 0000:00:05.1: setting latency timer to 64
    [    4.381164] scsi2 : sata_nv
    [    4.381618] scsi3 : sata_nv
    [    4.381825] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
    [    4.381828] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
    [    4.528428] usb 1-1: configuration #1 chosen from 1 choice
    [    4.857033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    4.880215] ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
    [    4.880218] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    4.888211] ata3.00: configured for UDMA/133
    [    5.218216] ata4: SATA link down (SStatus 0 SControl 300)
    [    5.218318] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
    [    5.218875] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
    [    5.218880] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
    [    5.218884] sata_nv 0000:00:05.2: Using SWNCQ mode
    [    5.219247] sata_nv 0000:00:05.2: setting latency timer to 64
    [    5.219644] scsi4 : sata_nv
    [    5.219752] scsi5 : sata_nv
    [    5.219959] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23
    [    5.219962] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23
    [    5.550218] ata5: SATA link down (SStatus 0 SControl 300)
    [    5.878212] ata6: SATA link down (SStatus 0 SControl 300)
    [    5.878319] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    [    5.878763] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    [    5.878768] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
    [    5.878773] forcedeth 0000:00:08.0: setting latency timer to 64
    [    5.878800] nv_probe: set workaround bit for reversed mac addr
    [    6.396493] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:6c:fd:d7
    [    6.396497] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
    [    6.396945] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
    [    6.396949] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
    [    6.396952] forcedeth 0000:00:09.0: setting latency timer to 64
    [    6.396969] nv_probe: set workaround bit for reversed mac addr
    [    6.916489] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:4d:17:aa
    [    6.916493] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
    [    6.919132] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
    [    6.919582] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
    [    6.919592] pata_acpi 0000:03:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
    [    6.919629] pata_acpi 0000:03:00.1: setting latency timer to 64
    [    6.919644] pata_acpi 0000:03:00.1: PCI INT B disabled
    [    6.921990] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [    6.922002] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
    [    6.971734] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    [    6.972753] ahci 0000:03:00.0: version 3.0
    [    6.972790] pata_amd 0000:00:04.0: version 0.3.10
    [    6.972839] pata_amd 0000:00:04.0: setting latency timer to 64
    [    6.973218] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
    [    6.973222] ahci 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
    [    6.974817] scsi6 : pata_amd
    [    6.976112] scsi7 : pata_amd
    [    6.977028] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    6.977031] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    6.984573] usbcore: registered new interface driver libusual
    [    6.989290] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [    6.989295] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    [    6.989301] ahci 0000:03:00.0: setting latency timer to 64
    [    6.991729] scsi8 : ahci
    [    6.991847] scsi9 : ahci
    [    6.991885] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
    [    6.991889] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
    [    6.992027] Initializing USB Mass Storage driver...
    [    6.992120] scsi10 : SCSI emulation for USB Mass Storage devices
    [    6.992206] usbcore: registered new interface driver usb-storage
    [    6.992210] USB Mass Storage support registered.
    [    6.992329] usb-storage: device found at 4
    [    6.992331] usb-storage: waiting for device to settle before scanning
    [    7.000353] scsi 0:0:0:0: Attached scsi generic sg0 type 0
    [    7.000391] scsi 1:0:0:0: Attached scsi generic sg1 type 0
    [    7.000425] scsi 2:0:0:0: Attached scsi generic sg2 type 0
    [    7.148277] ata7.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
    [    7.148293] ata7.01: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
    [    7.148305] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c50000) ACPI=0x1f01f (30:30:0x1f)
    [    7.148310] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c50000) ACPI=0x1f01f (30:30:0x1f)
    [    7.164246] ata7.00: configured for UDMA/66
    [    7.180216] ata7.01: configured for UDMA/66
    [    7.180247] ata8: port disabled. ignoring.
    [    7.181115] scsi 6:0:0:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
    [    7.181273] scsi 6:0:0:0: Attached scsi generic sg3 type 5
    [    7.182165] scsi 6:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
    [    7.182264] scsi 6:0:1:0: Attached scsi generic sg4 type 5
    [    7.308029] ata9: SATA link down (SStatus 0 SControl 300)
    [    7.644026] ata10: SATA link down (SStatus 0 SControl 300)
    [    7.660142] pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
    [    7.660184] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [    7.660278] scsi11 : pata_jmicron
    [    7.660408] scsi12 : pata_jmicron
    [    7.660444] ata11: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16
    [    7.660446] ata12: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16
    [    8.024923] Driver 'sd' needs updating - please use bus_type methods
    [    8.025044] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    8.025067] sd 0:0:0:0: [sda] Write Protect is off
    [    8.025069] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    8.025106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    8.025187] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    8.025206] sd 0:0:0:0: [sda] Write Protect is off
    [    8.025209] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    8.025245] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    8.025249]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
    [    8.044832]  sda1 sda2 < sda5 >
    [    8.056238] sd 0:0:0:0: [sda] Attached SCSI disk
    [    8.056322] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [    8.056345] sd 1:0:0:0: [sdb] Write Protect is off
    [    8.056348] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    8.056385] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    8.056455] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [    8.056474] sd 1:0:0:0: [sdb] Write Protect is off
    [    8.056476] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    8.056512] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    8.056516]  sdb: sdb1
    [    8.075649] sd 1:0:0:0: [sdb] Attached SCSI disk
    [    8.075733] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
    [    8.075755] sd 2:0:0:0: [sdc] Write Protect is off
    [    8.075757] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    8.075794] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    8.075858] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
    [    8.075878] sd 2:0:0:0: [sdc] Write Protect is off
    [    8.075880] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    8.075915] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    8.075919]  sdc: sdc1 sdc2 < sdc5 >
    [    8.166801] sd 2:0:0:0: [sdc] Attached SCSI disk
    [    8.176689] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    8.176694] Uniform CD-ROM driver Revision: 3.20
    [    8.176802] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [    8.179242] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    8.179308] sr 6:0:1:0: Attached scsi CD-ROM sr1
    [    8.245583] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000d68335]
    [    8.480593] PM: Starting manual resume from disk
    [    8.480597] PM: Resume from partition 8:37
    [    8.480599] PM: Checking hibernation image.
    [    8.480763] PM: Resume from disk failed.
    [    8.541835] kjournald starting.  Commit interval 5 seconds
    [    8.541846] EXT3-fs: mounted filesystem with ordered data mode.
    [   11.992207] usb-storage: device scan complete
    [   11.997162] scsi 10:0:0:0: Direct-Access     ST912082 1A               0000 PQ: 0 ANSI: 0
    [   11.998022] sd 10:0:0:0: [sdd] 234441648 512-byte hardware sectors (120034 MB)
    [   11.998895] sd 10:0:0:0: [sdd] Write Protect is off
    [   11.998898] sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00
    [   11.998900] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [   11.999520] sd 10:0:0:0: [sdd] 234441648 512-byte hardware sectors (120034 MB)
    [   12.000394] sd 10:0:0:0: [sdd] Write Protect is off
    [   12.000396] sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00
    [   12.000398] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [   12.000402]  sdd: sdd1
    [   12.341043] sd 10:0:0:0: [sdd] Attached SCSI disk
    [   12.341156] sd 10:0:0:0: Attached scsi generic sg5 type 0
    [   13.443445] udevd version 124 started
    [   13.809208] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    [   13.809214] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
    [   13.809217] ACPI: Device needs an ACPI driver
    [   13.809231] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
    [   13.898643] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
    [   13.901642] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [   13.932069] ACPI: Power Button (FF) [PWRF]
    [   13.932152] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [   13.964029] ACPI: Power Button (CM) [PWRB]
    [   14.054531] Found: PMC Pm49FL004
    [   14.054540] ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
    [   14.180226] number of JEDEC chips: 1
    [   14.180230] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
    [   14.863314] parport_pc 00:0a: reported by Plug and Play ACPI
    [   14.863339] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [   15.058006] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [   15.284029] usb 2-2: reset high speed USB device using ehci_hcd and address 3
    [   15.442752] ndiswrapper: driver wlanchag (ZyXEL,08/16/2005, 1.5.0.102) loaded
    [   15.443405] ndiswrapper (ZwQueryValueKey:2330): not fully implemented (yet)
    [   15.514827] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
    [   15.514833] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
    [   15.514851] HDA Intel 0000:00:06.1: setting latency timer to 64
    [   15.518406] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [   15.750877] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [   15.928934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   15.929935] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [   15.929947] RME Hammerfall DSP 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
    [   15.973642] Linux agpgart interface v0.103
    [   16.535990] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
    [   17.934996] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
    [   17.935101] firmware: requesting multiface_firmware_rev11.bin
    [   17.959525] Hammerfall-DSP: cannot load firmware multiface_firmware_rev11.bin
    [   17.959531] Hammerfall-DSP: couldn't get firmware from userspace. try using hdsploader
    [   17.959534] Hammerfall-DSP: card initialization pending : waiting for firmware
    [   17.960143] nvidia 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
    [   17.960151] nvidia 0000:02:00.0: setting latency timer to 64
    [   17.960375] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
    [   30.515048] ndiswrapper (NdisWriteErrorLogEntry:190): log: C0001389, count: 4, return_address: f9b9f6eb
    [   30.515053] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0xf7bca800
    [   30.515056] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0x28
    [   30.515058] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0xf9b40000
    [   30.515061] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0xf9b40000
    [   30.515446] ndiswrapper (mp_init:219): couldn't initialize device: C0000001
    [   30.515451] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
    [   30.515466] ndiswrapper (mp_halt:262): device f7afc480 is not initialized - not halting
    [   30.515470] ndiswrapper: device eth%d removed
    [   30.515481] ndiswrapper: probe of 2-2:1.0 failed with error -22
    [   30.522614] usbcore: registered new interface driver ndiswrapper
    [   30.527117] usbcore: registered new interface driver snd-usb-audio
    [   31.512206] lp0: using parport0 (interrupt-driven).
    [   31.567140] ieee80211_crypt: registered algorithm 'NULL'
    [   31.665882] Adding 6064496k swap on /dev/sdc5.  Priority:-1 extents:1 across:6064496k
    [   32.236331] EXT3 FS on sdc1, internal journal
    [   33.256951] type=1505 audit(1232639779.922:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4630
    [   33.439014] type=1505 audit(1232639780.102:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4635
    [   33.439228] type=1505 audit(1232639780.102:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4635
    [   33.609645] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   34.107518] ACPI: WMI: Mapper loaded
    [   34.376243] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
    [   34.376301] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0xe
    [   34.376305] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x10
    [   34.376307] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0x10
    [   34.376310] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
    [   35.090268] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [   35.124955] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [   35.124966] apm: disabled - APM is not SMP safe.
    [   35.284253] ppdev: user-space parallel port driver
    [   37.001027] Clocksource tsc unstable (delta = -76688551 ns)
    [   38.528420] eth0: no link during initialization.
    [   39.688119] Bluetooth: Core ver 2.13
    [   39.689402] NET: Registered protocol family 31
    [   39.689414] Bluetooth: HCI device and connection manager initialized
    [   39.689422] Bluetooth: HCI socket layer initialized
    [   39.710728] Bluetooth: L2CAP ver 2.11
    [   39.710743] Bluetooth: L2CAP socket layer initialized
    [   39.721316] Bluetooth: RFCOMM socket layer initialized
    [   39.721345] Bluetooth: RFCOMM TTY layer initialized
    [   39.721350] Bluetooth: RFCOMM ver 1.10
    [   39.734321] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   39.734334] Bluetooth: BNEP filters: protocol multicast
    [   39.766610] Bridge firewalling registered
    [   39.766877] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    [   39.798100] Bluetooth: SCO (Voice Link) ver 0.6
    [   39.798114] Bluetooth: SCO socket layer initialized
    lau@laupc:~$ lsusb
    Bus 002 Device 004: ID 04b4:6830 Cypress Semiconductor Corp. CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPI
    Bus 002 Device 003: ID 0586:340c ZyXEL Communications Corp. 
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0763:0196 Midiman Oxygen 49
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    Device connected after boot
    Code:
    [    0.572202] Switched to high resolution mode on CPU 1
    [    0.576028] system 00:01: ioport range 0x1000-0x107f has been reserved
    [    0.576031] system 00:01: ioport range 0x1080-0x10ff has been reserved
    [    0.576034] system 00:01: ioport range 0x1400-0x147f has been reserved
    [    0.576037] system 00:01: ioport range 0x1480-0x14ff has been reserved
    [    0.576039] system 00:01: ioport range 0x1800-0x187f has been reserved
    [    0.576042] system 00:01: ioport range 0x1880-0x18ff has been reserved
    [    0.576048] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
    [    0.576051] system 00:02: ioport range 0x800-0x87f has been reserved
    [    0.576054] system 00:02: ioport range 0x290-0x297 has been reserved
    [    0.576066] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved
    [    0.576073] system 00:0e: iomem range 0xd2800-0xd3fff has been reserved
    [    0.576075] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
    [    0.576078] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
    [    0.576081] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
    [    0.576084] system 00:0e: iomem range 0xfefff000-0xfefff0ff could not be reserved
    [    0.576087] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
    [    0.576090] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
    [    0.576093] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    [    0.576096] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
    [    0.576099] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.576102] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
    [    0.576105] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
    [    0.576109] system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved
    [    0.576112] system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved
    [    0.576115] system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved
    [    0.611329] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
    [    0.611331] pci 0000:00:06.0:   IO window: disabled
    [    0.611335] pci 0000:00:06.0:   MEM window: 0xfde00000-0xfdefffff
    [    0.611338] pci 0000:00:06.0:   PREFETCH window: disabled
    [    0.611342] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
    [    0.611344] pci 0000:00:0a.0:   IO window: 0x9000-0x9fff
    [    0.611347] pci 0000:00:0a.0:   MEM window: 0xfa000000-0xfcffffff
    [    0.611350] pci 0000:00:0a.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
    [    0.611354] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:03
    [    0.611357] pci 0000:00:0e.0:   IO window: 0x7000-0x8fff
    [    0.611360] pci 0000:00:0e.0:   MEM window: 0xfdd00000-0xfddfffff
    [    0.611362] pci 0000:00:0e.0:   PREFETCH window: disabled
    [    0.611371] pci 0000:00:06.0: setting latency timer to 64
    [    0.611376] pci 0000:00:0a.0: setting latency timer to 64
    [    0.611380] pci 0000:00:0e.0: setting latency timer to 64
    [    0.611383] bus: 00 index 0 io port: [0, ffff]
    [    0.611385] bus: 00 index 1 mmio: [0, ffffffff]
    [    0.611388] bus: 01 index 0 mmio: [0, 0]
    [    0.611390] bus: 01 index 1 mmio: [fde00000, fdefffff]
    [    0.611392] bus: 01 index 2 mmio: [0, 0]
    [    0.611393] bus: 01 index 3 io port: [0, ffff]
    [    0.611395] bus: 01 index 4 mmio: [0, ffffffff]
    [    0.611398] bus: 02 index 0 io port: [9000, 9fff]
    [    0.611400] bus: 02 index 1 mmio: [fa000000, fcffffff]
    [    0.611402] bus: 02 index 2 mmio: [e0000000, efffffff]
    [    0.611404] bus: 02 index 3 mmio: [0, 0]
    [    0.611406] bus: 03 index 0 io port: [7000, 8fff]
    [    0.611408] bus: 03 index 1 mmio: [fdd00000, fddfffff]
    [    0.611410] bus: 03 index 2 mmio: [0, 0]
    [    0.611412] bus: 03 index 3 mmio: [0, 0]
    [    0.611423] NET: Registered protocol family 2
    [    0.624054] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.624314] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.624821] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.625068] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.625071] TCP reno registered
    [    0.632077] NET: Registered protocol family 1
    [    0.632187] checking if image is initramfs... it is
    [    1.262910] Freeing initrd memory: 8005k freed
    [    1.263961] audit: initializing netlink socket (disabled)
    [    1.263979] type=2000 audit(1232643568.261:1): initialized
    [    1.269501] highmem bounce pool size: 64 pages
    [    1.269506] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    1.272181] VFS: Disk quotas dquot_6.5.1
    [    1.272272] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    1.272377] msgmni has been set to 1743
    [    1.272498] io scheduler noop registered
    [    1.272500] io scheduler anticipatory registered
    [    1.272502] io scheduler deadline registered
    [    1.272513] io scheduler cfq registered (default)
    [    1.288071] pci 0000:00:05.0: Enabling HT MSI Mapping
    [    1.288086] pci 0000:00:05.1: Enabling HT MSI Mapping
    [    1.288101] pci 0000:00:05.2: Enabling HT MSI Mapping
    [    1.288115] pci 0000:00:06.0: Enabling HT MSI Mapping
    [    1.288131] pci 0000:00:06.1: Enabling HT MSI Mapping
    [    1.288148] pci 0000:00:08.0: Enabling HT MSI Mapping
    [    1.288165] pci 0000:00:09.0: Enabling HT MSI Mapping
    [    1.288179] pci 0000:00:0a.0: Enabling HT MSI Mapping
    [    1.288195] pci 0000:00:0e.0: Enabling HT MSI Mapping
    [    1.288219] pci 0000:02:00.0: Boot video device
    [    1.288361] pcieport-driver 0000:00:0a.0: setting latency timer to 64
    [    1.288383] pcieport-driver 0000:00:0a.0: found MSI capability
    [    1.288402] pci_express 0000:00:0a.0:pcie00: allocate port service
    [    1.288454] pci_express 0000:00:0a.0:pcie03: allocate port service
    [    1.288533] pcieport-driver 0000:00:0e.0: setting latency timer to 64
    [    1.288555] pcieport-driver 0000:00:0e.0: found MSI capability
    [    1.288571] pci_express 0000:00:0e.0:pcie00: allocate port service
    [    1.288621] pci_express 0000:00:0e.0:pcie03: allocate port service
    [    1.288969] isapnp: Scanning for PnP cards...
    [    1.641358] isapnp: No Plug & Play device found
    [    1.678820] hpet_resources: 0xfefff000 is busy
    [    1.678921] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [    1.679054] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.679759] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.681839] brd: module loaded
    [    1.681917] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [    1.682053] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    1.682433] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.682439] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.682775] mice: PS/2 mouse device common for all mice
    [    1.682915] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.682946] rtc0: alarms up to one year, y3k, hpet irqs
    [    1.683102] EISA: Probing bus 0 at eisa.0
    [    1.683108] Cannot allocate resource for EISA slot 1
    [    1.683121] Cannot allocate resource for EISA slot 7
    [    1.683123] Cannot allocate resource for EISA slot 8
    [    1.683126] EISA: Detected 0 cards.
    [    1.683129] cpuidle: using governor ladder
    [    1.683131] cpuidle: using governor menu
    [    1.683592] TCP cubic registered
    [    1.683617] Using IPI No-Shortcut mode
    [    1.683823] registered taskstats version 1
    [    1.683966]   Magic number: 9:760:995
    [    1.683978] tty ttyd8: hash matches
    [    1.683987] tty ttyab: hash matches
    [    1.684131] rtc_cmos 00:05: setting system clock to 2009-01-22 16:59:30 UTC (1232643570)
    [    1.684134] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.684136] EDD information not available.
    [    1.684379] Freeing unused kernel memory: 424k freed
    [    1.684437] Write protecting the kernel text: 2576k
    [    1.684473] Write protecting the kernel read-only data: 936k
    [    1.705924] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    1.862276] fuse init (API version 7.9)
    [    1.925081] fan PNP0C0B:00: registered as cooling_device0
    [    1.925088] ACPI: Fan [FAN] (on)
    [    1.951802] processor ACPI0007:00: registered as cooling_device1
    [    1.951879] processor ACPI0007:01: registered as cooling_device2
    [    1.960881] thermal LNXTHERM:01: registered as thermal_zone0
    [    1.961407] ACPI: Thermal Zone [THRM] (40 C)
    [    2.136401] usbcore: registered new interface driver usbfs
    [    2.136425] usbcore: registered new interface driver hub
    [    2.136653] usbcore: registered new device driver usb
    [    2.143189] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    [    2.143660] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    [    2.143671] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 23 (level, low) -> IRQ 23
    [    2.143683] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    2.143685] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    2.143731] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [    2.143754] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfe02f000
    [    2.155500] No dock devices found.
    [    2.194248] SCSI subsystem initialized
    [    2.198158] usb usb1: configuration #1 chosen from 1 choice
    [    2.198185] hub 1-0:1.0: USB hub found
    [    2.198196] hub 1-0:1.0: 10 ports detected
    [    2.225513] libata version 3.00 loaded.
    [    2.404820] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
    [    2.404832] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 22 (level, low) -> IRQ 22
    [    2.404845] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [    2.404848] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [    2.404892] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    [    2.404916] ehci_hcd 0000:00:02.1: debug port 1
    [    2.404920] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    [    2.404937] ehci_hcd 0000:00:02.1: irq 22, io mem 0xfe02e000
    [    2.580056] usb 1-1: new full speed USB device using ohci_hcd and address 2
    [    2.592041] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [    2.592191] usb usb2: configuration #1 chosen from 1 choice
    [    2.592218] hub 2-0:1.0: USB hub found
    [    2.592227] hub 2-0:1.0: 10 ports detected
    [    2.648096] hub 1-0:1.0: unable to enumerate USB device on port 1
    [    2.800402] pata_acpi 0000:00:04.0: setting latency timer to 64
    [    2.800913] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
    [    2.800925] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
    [    2.800942] pata_acpi 0000:00:05.0: setting latency timer to 64
    [    2.800949] pata_acpi 0000:00:05.0: PCI INT A disabled
    [    2.801392] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
    [    2.801399] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
    [    2.801415] pata_acpi 0000:00:05.1: setting latency timer to 64
    [    2.801422] pata_acpi 0000:00:05.1: PCI INT B disabled
    [    2.801849] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
    [    2.801853] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
    [    2.801949] pata_acpi 0000:00:05.2: setting latency timer to 64
    [    2.801957] pata_acpi 0000:00:05.2: PCI INT C disabled
    [    2.802105] sata_nv 0000:00:05.0: version 3.5
    [    2.802110] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
    [    2.802113] sata_nv 0000:00:05.0: Using SWNCQ mode
    [    2.802381] sata_nv 0000:00:05.0: setting latency timer to 64
    [    2.802985] scsi0 : sata_nv
    [    2.803101] scsi1 : sata_nv
    [    2.803304] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
    [    2.803307] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
    [    3.128030] usb 2-5: new high speed USB device using ehci_hcd and address 3
    [    3.264784] usb 2-5: configuration #1 chosen from 1 choice
    [    3.277043] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.327096] ata1.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [    3.327099] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    3.393736] ata1.00: configured for UDMA/133
    [    3.568020] usb 1-1: new full speed USB device using ohci_hcd and address 3
    [    3.780351] usb 1-1: configuration #1 chosen from 1 choice
    [    3.868044] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    3.923255] ata2.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [    3.923258] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    3.989860] ata2.00: configured for UDMA/133
    [    3.989963] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
    [    3.990508] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
    [    3.990635] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20
    [    3.990638] sata_nv 0000:00:05.1: Using SWNCQ mode
    [    3.990919] sata_nv 0000:00:05.1: setting latency timer to 64
    [    3.991130] scsi2 : sata_nv
    [    3.991205] scsi3 : sata_nv
    [    3.991413] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20
    [    3.991416] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20
    [    4.468033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    4.496224] ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
    [    4.496228] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    4.505213] ata3.00: configured for UDMA/133
    [    4.834214] ata4: SATA link down (SStatus 0 SControl 300)
    [    4.834318] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
    [    4.835781] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23
    [    4.835785] sata_nv 0000:00:05.2: Using SWNCQ mode
    [    4.836075] sata_nv 0000:00:05.2: setting latency timer to 64
    [    4.836239] scsi4 : sata_nv
    [    4.836330] scsi5 : sata_nv
    [    4.836538] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 23
    [    4.836541] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 23
    [    5.166222] ata5: SATA link down (SStatus 0 SControl 300)
    [    5.494215] ata6: SATA link down (SStatus 0 SControl 300)
    [    5.494327] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    [    5.494779] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    [    5.494783] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22
    [    5.494789] forcedeth 0000:00:08.0: setting latency timer to 64
    [    5.494816] nv_probe: set workaround bit for reversed mac addr
    [    6.012506] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:6c:fd:d7
    [    6.012510] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
    [    6.012994] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
    [    6.012998] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 21 (level, low) -> IRQ 21
    [    6.013013] forcedeth 0000:00:09.0: setting latency timer to 64
    [    6.013036] nv_probe: set workaround bit for reversed mac addr
    [    6.532519] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:4d:17:aa
    [    6.532523] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
    [    6.532854] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
    [    6.533321] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
    [    6.533331] pata_acpi 0000:03:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
    [    6.533367] pata_acpi 0000:03:00.1: setting latency timer to 64
    [    6.533382] pata_acpi 0000:03:00.1: PCI INT B disabled
    [    6.536598] ahci 0000:03:00.0: version 3.0
    [    6.537060] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
    [    6.537064] ahci 0000:03:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
    [    6.537528] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    [    6.537537] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
    [    6.587258] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    [    6.587328] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [    6.587333] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    [    6.587338] ahci 0000:03:00.0: setting latency timer to 64
    [    6.587347] pata_amd 0000:00:04.0: version 0.3.10
    [    6.587396] pata_amd 0000:00:04.0: setting latency timer to 64
    [    6.591954] scsi6 : pata_amd
    [    6.592106] scsi7 : ahci
    [    6.592141] scsi8 : pata_amd
    [    6.593179] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    6.593183] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    6.593639] scsi9 : ahci
    [    6.593690] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
    [    6.593694] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
    [    6.619422] usbcore: registered new interface driver libusual
    [    6.626486] Initializing USB Mass Storage driver...
    [    6.626576] scsi10 : SCSI emulation for USB Mass Storage devices
    [    6.626676] usbcore: registered new interface driver usb-storage
    [    6.626679] USB Mass Storage support registered.
    [    6.626800] usb-storage: device found at 3
    [    6.626802] usb-storage: waiting for device to settle before scanning
    [    6.632904] scsi 0:0:0:0: Attached scsi generic sg0 type 0
    [    6.632939] scsi 1:0:0:0: Attached scsi generic sg1 type 0
    [    6.632972] scsi 2:0:0:0: Attached scsi generic sg2 type 0
    [    6.764266] ata7.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
    [    6.764283] ata7.01: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
    [    6.764296] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c50000) ACPI=0x1f01f (30:30:0x1f)
    [    6.764302] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c50000) ACPI=0x1f01f (30:30:0x1f)
    [    6.780215] ata7.00: configured for UDMA/66
    [    6.796218] ata7.01: configured for UDMA/66
    [    6.796248] ata8: port disabled. ignoring.
    [    6.797348] scsi 6:0:0:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
    [    6.797516] scsi 6:0:0:0: Attached scsi generic sg3 type 5
    [    6.798855] scsi 6:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
    [    6.798954] scsi 6:0:1:0: Attached scsi generic sg4 type 5
    [    6.912028] ata9: SATA link down (SStatus 0 SControl 300)
    [    7.248026] ata10: SATA link down (SStatus 0 SControl 300)
    [    7.264083] pata_jmicron 0000:03:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
    [    7.264120] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [    7.264200] scsi11 : pata_jmicron
    [    7.265292] scsi12 : pata_jmicron
    [    7.265341] ata11: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 16
    [    7.265344] ata12: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 16
    [    7.629885] Driver 'sd' needs updating - please use bus_type methods
    [    7.629989] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    7.630008] sd 0:0:0:0: [sda] Write Protect is off
    [    7.630011] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    7.630041] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.630107] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    7.630123] sd 0:0:0:0: [sda] Write Protect is off
    [    7.630126] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    7.630155] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.630159]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
    [    7.648356]  sda1 sda2 < sda5 >
    [    7.659446] sd 0:0:0:0: [sda] Attached SCSI disk
    [    7.659529] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [    7.659551] sd 1:0:0:0: [sdb] Write Protect is off
    [    7.659554] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    7.659590] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.659658] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [    7.659678] sd 1:0:0:0: [sdb] Write Protect is off
    [    7.659681] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    7.659717] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.659720]  sdb: sdb1
    [    7.678173] sd 1:0:0:0: [sdb] Attached SCSI disk
    [    7.678257] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
    [    7.678278] sd 2:0:0:0: [sdc] Write Protect is off
    [    7.678281] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    7.678318] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.678381] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
    [    7.678400] sd 2:0:0:0: [sdc] Write Protect is off
    [    7.678403] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    7.678438] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.678442]  sdc: sdc1 sdc2 < sdc5 >
    [    7.752399] sd 2:0:0:0: [sdc] Attached SCSI disk
    [    7.765604] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    7.765610] Uniform CD-ROM driver Revision: 3.20
    [    7.765709] sr 6:0:0:0: Attached scsi CD-ROM sr0
    [    7.767854] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    7.767929] sr 6:0:1:0: Attached scsi CD-ROM sr1
    [    7.864704] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000d68335]
    [    8.060626] PM: Starting manual resume from disk
    [    8.060631] PM: Resume from partition 8:37
    [    8.060633] PM: Checking hibernation image.
    [    8.060790] PM: Resume from disk failed.
    [    8.119140] kjournald starting.  Commit interval 5 seconds
    [    8.119152] EXT3-fs: mounted filesystem with ordered data mode.
    [   11.624128] usb-storage: device scan complete
    [   11.627864] scsi 10:0:0:0: Direct-Access     ST912082 1A               0000 PQ: 0 ANSI: 0
    [   11.628717] sd 10:0:0:0: [sdd] 234441648 512-byte hardware sectors (120034 MB)
    [   11.629591] sd 10:0:0:0: [sdd] Write Protect is off
    [   11.629594] sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00
    [   11.629596] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [   11.630216] sd 10:0:0:0: [sdd] 234441648 512-byte hardware sectors (120034 MB)
    [   11.631090] sd 10:0:0:0: [sdd] Write Protect is off
    [   11.631092] sd 10:0:0:0: [sdd] Mode Sense: 27 00 00 00
    [   11.631094] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [   11.631098]  sdd: sdd1
    [   11.867975] sd 10:0:0:0: [sdd] Attached SCSI disk
    [   11.868084] sd 10:0:0:0: Attached scsi generic sg5 type 0
    [   12.763830] udevd version 124 started
    [   13.209344] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    [   13.209350] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
    [   13.209353] ACPI: Device needs an ACPI driver
    [   13.209371] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
    [   13.275113] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
    [   13.285783] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [   13.313055] ACPI: Power Button (FF) [PWRF]
    [   13.313159] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [   13.341039] ACPI: Power Button (CM) [PWRB]
    [   13.444670] Found: PMC Pm49FL004
    [   13.444679] ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
    [   13.545353] number of JEDEC chips: 1
    [   13.545357] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
    [   14.382717] parport_pc 00:0a: reported by Plug and Play ACPI
    [   14.382742] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [   14.390001] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    [   14.390012] RME Hammerfall DSP 0000:01:07.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
    [   14.639607] usbcore: registered new interface driver snd-usb-audio
    [   14.751275] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [   15.078064] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [   15.779192] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
    [   16.396094] Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
    [   16.396199] firmware: requesting multiface_firmware_rev11.bin
    [   16.418224] Hammerfall-DSP: cannot load firmware multiface_firmware_rev11.bin
    [   16.418229] Hammerfall-DSP: couldn't get firmware from userspace. try using hdsploader
    [   16.418232] Hammerfall-DSP: card initialization pending : waiting for firmware
    [   16.419287] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
    [   16.419293] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
    [   16.419318] HDA Intel 0000:00:06.1: setting latency timer to 64
    [   16.831050] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   16.877382] Linux agpgart interface v0.103
    [   17.018859] nvidia: module license 'NVIDIA' taints kernel.
    [   17.273846] nvidia 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
    [   17.273854] nvidia 0000:02:00.0: setting latency timer to 64
    [   17.274116] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
    [   17.787607] lp0: using parport0 (interrupt-driven).
    [   17.841802] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [   17.884011] usbcore: registered new interface driver ndiswrapper
    [   17.924357] ieee80211_crypt: registered algorithm 'NULL'
    [   18.022699] Adding 6064496k swap on /dev/sdc5.  Priority:-1 extents:1 across:6064496k
    [   18.589796] EXT3 FS on sdc1, internal journal
    [   19.622136] type=1505 audit(1232639987.946:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4565
    [   19.803651] type=1505 audit(1232639988.126:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4570
    [   19.803867] type=1505 audit(1232639988.126:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4570
    [   19.916814] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   20.448225] ACPI: WMI: Mapper loaded
    [   20.725225] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
    [   20.725281] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0xe
    [   20.725285] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x10
    [   20.725288] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0x10
    [   20.725290] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
    [   21.414434] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [   21.448986] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [   21.448997] apm: disabled - APM is not SMP safe.
    [   21.616542] ppdev: user-space parallel port driver
    [   23.500025] Clocksource tsc unstable (delta = -133309750 ns)
    [   25.006402] eth0: no link during initialization.
    [   25.713591] Bluetooth: Core ver 2.13
    [   25.715675] NET: Registered protocol family 31
    [   25.715685] Bluetooth: HCI device and connection manager initialized
    [   25.715693] Bluetooth: HCI socket layer initialized
    [   25.731081] Bluetooth: L2CAP ver 2.11
    [   25.731095] Bluetooth: L2CAP socket layer initialized
    [   25.744516] Bluetooth: RFCOMM socket layer initialized
    [   25.744551] Bluetooth: RFCOMM TTY layer initialized
    [   25.744556] Bluetooth: RFCOMM ver 1.10
    [   25.763924] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   25.763939] Bluetooth: BNEP filters: protocol multicast
    [   25.789387] Bridge firewalling registered
    [   25.789883] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    [   25.814105] Bluetooth: SCO (Voice Link) ver 0.6
    [   25.814118] Bluetooth: SCO socket layer initialized
    [   61.664031] usb 2-2: new high speed USB device using ehci_hcd and address 4
    [   61.798836] usb 2-2: configuration #1 chosen from 1 choice
    [   61.916050] usb 2-2: reset high speed USB device using ehci_hcd and address 4
    [   62.114092] ndiswrapper: driver wlanchag (ZyXEL,08/16/2005, 1.5.0.102) loaded
    [   62.115918] ndiswrapper (ZwQueryValueKey:2330): not fully implemented (yet)
    [   62.761745] wlan0: ethernet device 00:13:49:38:54:eb using NDIS driver: wlanchag, version: 0x10005, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0586:340C.F.conf
    [   62.820824] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
    lau@laupc:~$ lsusb
    Bus 002 Device 004: ID 0586:340c ZyXEL Communications Corp. 
    Bus 002 Device 003: ID 04b4:6830 Cypress Semiconductor Corp. CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPI
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 003: ID 0763:0196 Midiman Oxygen 49
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

  7. #277
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    etherealethel: please run these commands, which will install a different driver for your card that may work better (you will need to be connected to the Internet for some of these commands; hopefully your wireless will last long enough for these to work; otherwise, we can work around it...):

    Code:
    sudo apt-get install build-essential
    wget http://rt2x00.serialmonkey.com/rt73-cvs-daily.tar.gz
    tar -xzvf rt73*
    cd rt73*/Module
    make
    sudo make install
    echo rt73  | sudo tee -a /etc/modules
    sudo -s
    echo 'blacklist rt2500usb' >> /etc/modprobe.d/blacklist
    echo 'blacklist rt2500pci' >> /etc/modprobe.d/blacklist
    echo 'blacklist rt61pci' >> /etc/modprobe.d/blacklist
    echo 'blacklist rt2x00pci' >> /etc/modprobe.d/blacklist
    echo 'blacklist rt2400pci' >> /etc/modprobe.d/blacklist
    echo 'blacklist rt2x00lib' >> /etc/modprobe.d/blacklist
    echo 'blacklist rt2x00usb' >> /etc/modprobe.d/blacklist
    exit
    Then reboot. Do you have better connectivity now? If not, please post the output of:
    Code:
    dmesg | grep rt
    lshw -C Network
    sudo iwlist scan
    ping -c 10 google.com
    AMTQ: after looking into this more, I'm suspecting that the problem has to do with IRQ assignments. The ndiswrapper FAQ said (before the site went down, anyway...):

    If you get probe of XXXX:YY.ZZ.A failed with error -22, you may have IRQ problems or it might be a USB driver problem. If you have problems with IRQ assignment the kernel couldn't assign IRQ for the wireless card, you can find out which IRQ ndiswrapper is trying to use and release that IRQ find out which other device is using it with cat /proc/interrupts. You may want to use ACPI and configure BIOS to assign IRQs using ACPI. If it's a USB driver problem there are known issues with high speed USB and ndiswrapper, module under 2.6 is called ehci_hcd, try modprobe --remove ehci_hcd and then reload the ndiswrapper module, that's worked for some people.
    I think that what's happening is this: when the device is connected before boot, BIOS assigns it an IRQ that conflicts with the one that ndiswrapper wants to use. If you plug it in after boot, Ubuntu decides which IRQ to use, and picks one that works for ndiswrapper. Or something like that (I'm no expert on how IRQ works).

    Here are possible solutions:

    1. in your BIOS, see if there are settings related to IRQ assignments--most decent BIOS will have options like these. Try playing with different settings and see if it makes a difference. (Unfortunately I can't be more specific than that because I don't know what your BIOS looks like, but just keep trying different settings and rebooting with the wireless card plugged in to see if any of them solves the problem.)
    2. open up your boot menu by typing:
    Code:
    sudo gedit /boot/grub/menu.lst
    Scroll towards the bottom and look for the section similar to this:
    Code:
    ## ## End Default Options ##
    
    title		Ubuntu 8.10, kernel 2.6.27-9-generic
    uuid		83db7aca-d0db-4077-af6b-12f007d63db4
    kernel		/boot/vmlinuz-2.6.27-9-generic root=UUID=83db7aca-d0db-4077-af6b-12f007d63db4 ro quiet splash 
    initrd		/boot/initrd.img-2.6.27-9-generic
    quiet
    On the 'kernel' line of that section, add this string: pci=biosirq acpi=noirq so that the section looks like this:

    Code:
    ## ## End Default Options ##
    
    title		Ubuntu 8.10, kernel 2.6.27-9-generic
    uuid		83db7aca-d0db-4077-af6b-12f007d63db4
    kernel		/boot/vmlinuz-2.6.27-9-generic root=UUID=83db7aca-d0db-4077-af6b-12f007d63db4 ro quiet splash pci=biosirq acpi=noirq
    initrd		/boot/initrd.img-2.6.27-9-generic
    quiet
    Save the file and reboot your computer, with the wireless card plugged in before boot. If this doesn't solve the problem, please post the output again of:
    Code:
    dmesg

  8. #278
    Join Date
    Jan 2009
    Beans
    17
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Comprehensive ndiswrapper troubleshooting guide

    pytheas22:
    1. I searched the BIOS-menu but none of the options said anything about IRQ assignment, so I tried number 2.
    2. Unfortunately this made it worse: Before I added this boot-option, the system managed sometimes to recognize the device correctly even when it was plugged in before booting the system. After adding the option, the system ALWAYS refuses to work with my WLAN-stick

    Anyway, here's the output of dmesg:
    Code:
    [    0.484866] PCI: 0000:01:0b.0 reg 10 32bit mmio: [fdeff000, fdeff7ff]
    [    0.484872] PCI: 0000:01:0b.0 reg 14 32bit mmio: [fdef8000, fdefbfff]
    [    0.484896] pci 0000:01:0b.0: supports D1
    [    0.484897] pci 0000:01:0b.0: supports D2
    [    0.484900] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
    [    0.484903] pci 0000:01:0b.0: PME# disabled
    [    0.484920] pci 0000:00:06.0: transparent bridge
    [    0.484924] PCI: bridge 0000:00:06.0 32bit mmio: [fde00000, fdefffff]
    [    0.484945] PCI: 0000:02:00.0 reg 10 32bit mmio: [fa000000, faffffff]
    [    0.484950] PCI: 0000:02:00.0 reg 14 32bit mmio: [e0000000, efffffff]
    [    0.484960] PCI: 0000:02:00.0 reg 1c 64bit mmio: [fb000000, fbffffff]
    [    0.484965] PCI: 0000:02:00.0 reg 24 io port: [9c00, 9c7f]
    [    0.484969] PCI: 0000:02:00.0 reg 30 32bit mmio: [fcfe0000, fcffffff]
    [    0.485005] PCI: bridge 0000:00:0a.0 io port: [9000, 9fff]
    [    0.485008] PCI: bridge 0000:00:0a.0 32bit mmio: [fa000000, fcffffff]
    [    0.485012] PCI: bridge 0000:00:0a.0 64bit mmio pref: [e0000000, efffffff]
    [    0.485073] PCI: 0000:03:00.0 reg 24 32bit mmio: [fddfe000, fddfffff]
    [    0.485080] PCI: 0000:03:00.0 reg 30 32bit mmio: [fdde0000, fddeffff]
    [    0.485097] pci 0000:03:00.0: PME# supported from D3hot
    [    0.485101] pci 0000:03:00.0: PME# disabled
    [    0.485129] PCI: 0000:03:00.1 reg 10 io port: [8c00, 8c07]
    [    0.485136] PCI: 0000:03:00.1 reg 14 io port: [8800, 8803]
    [    0.485143] PCI: 0000:03:00.1 reg 18 io port: [8400, 8407]
    [    0.485150] PCI: 0000:03:00.1 reg 1c io port: [8000, 8003]
    [    0.485157] PCI: 0000:03:00.1 reg 20 io port: [7c00, 7c0f]
    [    0.485213] PCI: bridge 0000:00:0e.0 io port: [7000, 8fff]
    [    0.485216] PCI: bridge 0000:00:0e.0 32bit mmio: [fdd00000, fddfffff]
    [    0.485225] bus 00 -> node 0
    [    0.485232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [    0.485741] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    [    0.546455] Linux Plug and Play Support v0.97 (c) Adam Belay
    [    0.546455] pnp: PnP ACPI init
    [    0.546455] ACPI: bus type pnp registered
    [    0.546455] pnp 00:04: IRQ 8 override to level, low
    [    0.546455] PCI: setting IRQ 8 as level-triggered
    [    0.548578] pnp 00:09: IRQ 4 override to level, low
    [    0.548580] PCI: setting IRQ 4 as level-triggered
    [    0.553235] pnp: PnP ACPI: found 15 devices
    [    0.553235] ACPI: ACPI bus type pnp unregistered
    [    0.553235] PnPBIOS: Disabled by ACPI PNP
    [    0.553235] PCI: Probing PCI hardware
    [    0.553235] PCI: Discovered primary peer bus ff [IRQ]
    [    0.553235] pci 0000:00:00.0: default IRQ router [10de/0369]
    [    0.553235] pci 0000:00:01.1: PCI->APIC IRQ transform: INT A -> IRQ 10
    [    0.553235] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 11
    [    0.553235] pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 5
    [    0.553235] pci 0000:00:05.0: PCI->APIC IRQ transform: INT A -> IRQ 5
    [    0.553235] pci 0000:00:05.1: PCI->APIC IRQ transform: INT B -> IRQ 10
    [    0.553235] pci 0000:00:05.2: PCI->APIC IRQ transform: INT C -> IRQ 11
    [    0.553235] pci 0000:00:06.1: PCI->APIC IRQ transform: INT B -> IRQ 5
    [    0.553235] pci 0000:00:08.0: PCI->APIC IRQ transform: INT A -> IRQ 10
    [    0.553235] pci 0000:00:09.0: PCI->APIC IRQ transform: INT A -> IRQ 10
    [    0.553235] pci 0000:01:07.0: PCI->APIC IRQ transform: INT A -> IRQ 10
    [    0.553235] pci 0000:01:0b.0: using bridge 0000:00:06.0 INT D to get IRQ 5
    [    0.553235] pci 0000:01:0b.0: PCI->APIC IRQ transform: INT D -> IRQ 5
    [    0.553235] pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 11
    [    0.553235] pci 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 11
    [    0.553235] pci 0000:03:00.1: PCI->APIC IRQ transform: INT B -> IRQ 11
    [    0.560040] NET: Registered protocol family 8
    [    0.560043] NET: Registered protocol family 20
    [    0.560056] NetLabel: Initializing
    [    0.560056] NetLabel:  domain hash size = 128
    [    0.560056] NetLabel:  protocols = UNLABELED CIPSOv4
    [    0.560068] NetLabel:  unlabeled traffic allowed by default
    [    0.560076] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
    [    0.560080] hpet0: 3 32-bit timers, 25000000 Hz
    [    0.561623] tracer: 772 pages allocated for 65536 entries of 48 bytes
    [    0.561625]    actual entries 65620
    [    0.561747] AppArmor: AppArmor Filesystem Enabled
    [    0.561774] ACPI: RTC can wake from S4
    [    0.564044] Switched to high resolution mode on CPU 0
    [    0.564202] Switched to high resolution mode on CPU 1
    [    0.568030] system 00:01: ioport range 0x1000-0x107f has been reserved
    [    0.568033] system 00:01: ioport range 0x1080-0x10ff has been reserved
    [    0.568036] system 00:01: ioport range 0x1400-0x147f has been reserved
    [    0.568039] system 00:01: ioport range 0x1480-0x14ff has been reserved
    [    0.568042] system 00:01: ioport range 0x1800-0x187f has been reserved
    [    0.568045] system 00:01: ioport range 0x1880-0x18ff has been reserved
    [    0.568051] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
    [    0.568054] system 00:02: ioport range 0x800-0x87f has been reserved
    [    0.568057] system 00:02: ioport range 0x290-0x297 has been reserved
    [    0.568069] system 00:0d: iomem range 0xf0000000-0xf3ffffff could not be reserved
    [    0.568075] system 00:0e: iomem range 0xd2800-0xd3fff has been reserved
    [    0.568078] system 00:0e: iomem range 0xf0000-0xf7fff could not be reserved
    [    0.568081] system 00:0e: iomem range 0xf8000-0xfbfff could not be reserved
    [    0.568084] system 00:0e: iomem range 0xfc000-0xfffff could not be reserved
    [    0.568087] system 00:0e: iomem range 0xfefff000-0xfefff0ff could not be reserved
    [    0.568090] system 00:0e: iomem range 0x7fee0000-0x7fefffff could not be reserved
    [    0.568093] system 00:0e: iomem range 0xffff0000-0xffffffff could not be reserved
    [    0.568096] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
    [    0.568099] system 00:0e: iomem range 0x100000-0x7fedffff could not be reserved
    [    0.568102] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved
    [    0.568105] system 00:0e: iomem range 0xfee00000-0xfeefffff could not be reserved
    [    0.568108] system 00:0e: iomem range 0xfefff000-0xfeffffff could not be reserved
    [    0.568112] system 00:0e: iomem range 0xfff80000-0xfff80fff could not be reserved
    [    0.568115] system 00:0e: iomem range 0xfff90000-0xfffbffff could not be reserved
    [    0.568118] system 00:0e: iomem range 0xfffed000-0xfffeffff could not be reserved
    [    0.603342] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
    [    0.603344] pci 0000:00:06.0:   IO window: disabled
    [    0.603348] pci 0000:00:06.0:   MEM window: 0xfde00000-0xfdefffff
    [    0.603351] pci 0000:00:06.0:   PREFETCH window: disabled
    [    0.603355] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02
    [    0.603358] pci 0000:00:0a.0:   IO window: 0x9000-0x9fff
    [    0.603361] pci 0000:00:0a.0:   MEM window: 0xfa000000-0xfcffffff
    [    0.603364] pci 0000:00:0a.0:   PREFETCH window: 0x000000e0000000-0x000000efffffff
    [    0.603368] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:03
    [    0.603371] pci 0000:00:0e.0:   IO window: 0x7000-0x8fff
    [    0.603374] pci 0000:00:0e.0:   MEM window: 0xfdd00000-0xfddfffff
    [    0.603376] pci 0000:00:0e.0:   PREFETCH window: disabled
    [    0.603385] pci 0000:00:06.0: setting latency timer to 64
    [    0.603390] pci 0000:00:0a.0: setting latency timer to 64
    [    0.603395] pci 0000:00:0e.0: setting latency timer to 64
    [    0.603398] bus: 00 index 0 io port: [0, ffff]
    [    0.603400] bus: 00 index 1 mmio: [0, ffffffff]
    [    0.603402] bus: 01 index 0 mmio: [0, 0]
    [    0.603404] bus: 01 index 1 mmio: [fde00000, fdefffff]
    [    0.603406] bus: 01 index 2 mmio: [0, 0]
    [    0.603408] bus: 01 index 3 io port: [0, ffff]
    [    0.603410] bus: 01 index 4 mmio: [0, ffffffff]
    [    0.603412] bus: 02 index 0 io port: [9000, 9fff]
    [    0.603414] bus: 02 index 1 mmio: [fa000000, fcffffff]
    [    0.603416] bus: 02 index 2 mmio: [e0000000, efffffff]
    [    0.603418] bus: 02 index 3 mmio: [0, 0]
    [    0.603420] bus: 03 index 0 io port: [7000, 8fff]
    [    0.603422] bus: 03 index 1 mmio: [fdd00000, fddfffff]
    [    0.603424] bus: 03 index 2 mmio: [0, 0]
    [    0.603426] bus: 03 index 3 mmio: [0, 0]
    [    0.603429] bus: ff index 0 io port: [0, ffff]
    [    0.603431] bus: ff index 1 mmio: [0, ffffffff]
    [    0.603442] NET: Registered protocol family 2
    [    0.616055] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.616316] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [    0.616817] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [    0.617065] TCP: Hash tables configured (established 131072 bind 65536)
    [    0.617068] TCP reno registered
    [    0.624077] NET: Registered protocol family 1
    [    0.624184] checking if image is initramfs... it is
    [    1.254552] Freeing initrd memory: 8005k freed
    [    1.255593] audit: initializing netlink socket (disabled)
    [    1.255610] type=2000 audit(1232757681.253:1): initialized
    [    1.261124] highmem bounce pool size: 64 pages
    [    1.261129] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [    1.263800] VFS: Disk quotas dquot_6.5.1
    [    1.263893] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [    1.263997] msgmni has been set to 1743
    [    1.264113] io scheduler noop registered
    [    1.264116] io scheduler anticipatory registered
    [    1.264118] io scheduler deadline registered
    [    1.264129] io scheduler cfq registered (default)
    [    1.281067] pci 0000:00:05.0: Enabling HT MSI Mapping
    [    1.281082] pci 0000:00:05.1: Enabling HT MSI Mapping
    [    1.281097] pci 0000:00:05.2: Enabling HT MSI Mapping
    [    1.281111] pci 0000:00:06.0: Enabling HT MSI Mapping
    [    1.281127] pci 0000:00:06.1: Enabling HT MSI Mapping
    [    1.281144] pci 0000:00:08.0: Enabling HT MSI Mapping
    [    1.281160] pci 0000:00:09.0: Enabling HT MSI Mapping
    [    1.281175] pci 0000:00:0a.0: Enabling HT MSI Mapping
    [    1.281191] pci 0000:00:0e.0: Enabling HT MSI Mapping
    [    1.281214] pci 0000:02:00.0: Boot video device
    [    1.281359] pcieport-driver 0000:00:0a.0: setting latency timer to 64
    [    1.281384] pcieport-driver 0000:00:0a.0: found MSI capability
    [    1.281405] pci_express 0000:00:0a.0:pcie00: allocate port service
    [    1.281457] pci_express 0000:00:0a.0:pcie03: allocate port service
    [    1.281535] pcieport-driver 0000:00:0e.0: setting latency timer to 64
    [    1.281558] pcieport-driver 0000:00:0e.0: found MSI capability
    [    1.281575] pci_express 0000:00:0e.0:pcie00: allocate port service
    [    1.281625] pci_express 0000:00:0e.0:pcie03: allocate port service
    [    1.281896] isapnp: Scanning for PnP cards...
    [    1.634293] isapnp: No Plug & Play device found
    [    1.672576] hpet_resources: 0xfefff000 is busy
    [    1.672673] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
    [    1.672795] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.673460] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [    1.675211] brd: module loaded
    [    1.675282] input: Macintosh mouse button emulation as /devices/virtual/input/input0
    [    1.675407] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [    1.675777] serio: i8042 KBD port at 0x60,0x64 irq 1
    [    1.675783] serio: i8042 AUX port at 0x60,0x64 irq 12
    [    1.685203] mice: PS/2 mouse device common for all mice
    [    1.685346] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [    1.685377] rtc0: alarms up to one year, y3k, hpet irqs
    [    1.685538] EISA: Probing bus 0 at eisa.0
    [    1.685544] Cannot allocate resource for EISA slot 1
    [    1.685557] Cannot allocate resource for EISA slot 7
    [    1.685559] Cannot allocate resource for EISA slot 8
    [    1.685561] EISA: Detected 0 cards.
    [    1.685564] cpuidle: using governor ladder
    [    1.685567] cpuidle: using governor menu
    [    1.686027] TCP cubic registered
    [    1.686052] Using IPI No-Shortcut mode
    [    1.686261] registered taskstats version 1
    [    1.686413]   Magic number: 9:899:658
    [    1.686418] block ram11: hash matches
    [    1.686578] rtc_cmos 00:05: setting system clock to 2009-01-24 00:41:22 UTC (1232757682)
    [    1.686581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [    1.686583] EDD information not available.
    [    1.686825] Freeing unused kernel memory: 424k freed
    [    1.686883] Write protecting the kernel text: 2576k
    [    1.686919] Write protecting the kernel read-only data: 936k
    [    1.701767] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    [    1.872536] fuse init (API version 7.9)
    [    1.900253] fan PNP0C0B:00: registered as cooling_device0
    [    1.900260] ACPI: Fan [FAN] (on)
    [    1.916238] processor ACPI0007:00: registered as cooling_device1
    [    1.916304] processor ACPI0007:01: registered as cooling_device2
    [    1.919026] thermal LNXTHERM:01: registered as thermal_zone0
    [    1.919552] ACPI: Thermal Zone [THRM] (40 C)
    [    2.514217] No dock devices found.
    [    2.552452] SCSI subsystem initialized
    [    2.577842] usbcore: registered new interface driver usbfs
    [    2.577869] usbcore: registered new interface driver hub
    [    2.577937] usbcore: registered new device driver usb
    [    2.578211] libata version 3.00 loaded.
    [    2.580069] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
    [    2.580086] forcedeth 0000:00:08.0: setting latency timer to 64
    [    2.580111] nv_probe: set workaround bit for reversed mac addr
    [    2.591124] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    [    3.100515] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:17:31:6c:fd:d7
    [    3.100520] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
    [    3.100677] forcedeth 0000:00:09.0: setting latency timer to 64
    [    3.100703] nv_probe: set workaround bit for reversed mac addr
    [    3.620483] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:18:f3:4d:17:aa
    [    3.620487] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
    [    3.620720] ohci_hcd 0000:00:02.0: setting latency timer to 64
    [    3.620724] ohci_hcd 0000:00:02.0: OHCI Host Controller
    [    3.620780] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
    [    3.620802] ohci_hcd 0000:00:02.0: irq 11, io mem 0xfe02f000
    [    3.678242] usb usb1: configuration #1 chosen from 1 choice
    [    3.678366] hub 1-0:1.0: USB hub found
    [    3.678377] hub 1-0:1.0: 10 ports detected
    [    3.884742] ehci_hcd 0000:00:02.1: setting latency timer to 64
    [    3.884747] ehci_hcd 0000:00:02.1: EHCI Host Controller
    [    3.884773] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
    [    3.884795] ehci_hcd 0000:00:02.1: debug port 1
    [    3.884799] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
    [    3.884814] ehci_hcd 0000:00:02.1: irq 5, io mem 0xfe02e000
    [    3.896016] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    [    3.896106] usb usb2: configuration #1 chosen from 1 choice
    [    3.896132] hub 2-0:1.0: USB hub found
    [    3.896140] hub 2-0:1.0: 10 ports detected
    [    4.104967] pata_acpi 0000:00:04.0: setting latency timer to 64
    [    4.105016] sata_nv 0000:00:05.0: version 3.5
    [    4.105022] sata_nv 0000:00:05.0: Using SWNCQ mode
    [    4.105369] sata_nv 0000:00:05.0: setting latency timer to 64
    [    4.105761] scsi0 : sata_nv
    [    4.105877] scsi1 : sata_nv
    [    4.106082] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 5
    [    4.106085] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 5
    [    4.364023] usb 2-2: new high speed USB device using ehci_hcd and address 3
    [    4.497826] usb 2-2: configuration #1 chosen from 1 choice
    [    4.580036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    4.634817] ata1.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [    4.634820] ata1.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    4.701449] ata1.00: configured for UDMA/133
    [    4.800015] usb 1-1: new full speed USB device using ohci_hcd and address 2
    [    5.013282] usb 1-1: configuration #1 chosen from 1 choice
    [    5.176035] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    5.225212] ata2.00: ATA-7: ST3320620AS, 3.AAD, max UDMA/133
    [    5.225215] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    5.291842] ata2.00: configured for UDMA/133
    [    5.291950] scsi 0:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
    [    5.292106] scsi 1:0:0:0: Direct-Access     ATA      ST3320620AS      3.AA PQ: 0 ANSI: 5
    [    5.292219] sata_nv 0000:00:05.1: Using SWNCQ mode
    [    5.292585] sata_nv 0000:00:05.1: setting latency timer to 64
    [    5.293545] scsi2 : sata_nv
    [    5.293903] scsi3 : sata_nv
    [    5.294106] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 10
    [    5.294109] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 10
    [    5.768033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [    5.776208] ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
    [    5.776211] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
    [    5.784235] ata3.00: configured for UDMA/133
    [    6.114229] ata4: SATA link down (SStatus 0 SControl 300)
    [    6.114334] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD321KJ  CP10 PQ: 0 ANSI: 5
    [    6.114474] sata_nv 0000:00:05.2: Using SWNCQ mode
    [    6.114843] sata_nv 0000:00:05.2: setting latency timer to 64
    [    6.115589] scsi4 : sata_nv
    [    6.116053] scsi5 : sata_nv
    [    6.116261] ata5: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 11
    [    6.116264] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 11
    [    6.446218] ata5: SATA link down (SStatus 0 SControl 300)
    [    6.774214] ata6: SATA link down (SStatus 0 SControl 300)
    [    6.824202] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]  MMIO=[fdeff000-fdeff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
    [    6.827042] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [    6.827085] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [    6.828926] scsi6 : pata_jmicron
    [    6.829972] scsi7 : pata_jmicron
    [    6.830012] ata7: PATA max UDMA/100 cmd 0x8c00 ctl 0x8800 bmdma 0x7c00 irq 11
    [    6.830014] ata8: PATA max UDMA/100 cmd 0x8400 ctl 0x8000 bmdma 0x7c08 irq 11
    [    7.151029] ahci 0000:03:00.0: version 3.0
    [    7.164042] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    [    7.164047] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
    [    7.164052] ahci 0000:03:00.0: setting latency timer to 64
    [    7.164235] scsi8 : ahci
    [    7.164595] scsi9 : ahci
    [    7.164636] ata9: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 11
    [    7.164640] ata10: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 11
    [    7.484028] ata9: SATA link down (SStatus 0 SControl 300)
    [    7.821026] ata10: SATA link down (SStatus 0 SControl 300)
    [    7.844777] pata_amd 0000:00:04.0: version 0.3.10
    [    7.844822] pata_amd 0000:00:04.0: setting latency timer to 64
    [    7.847316] scsi10 : pata_amd
    [    7.847402] scsi11 : pata_amd
    [    7.848339] ata11: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
    [    7.848342] ata12: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
    [    7.848637] scsi 0:0:0:0: Attached scsi generic sg0 type 0
    [    7.848672] scsi 1:0:0:0: Attached scsi generic sg1 type 0
    [    7.851218] scsi 2:0:0:0: Attached scsi generic sg2 type 0
    [    7.878820] Driver 'sd' needs updating - please use bus_type methods
    [    7.878939] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    7.878962] sd 0:0:0:0: [sda] Write Protect is off
    [    7.878965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    7.879000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.879080] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
    [    7.879099] sd 0:0:0:0: [sda] Write Protect is off
    [    7.879101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    7.879136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.879139]  sda: sda1 sda2 < sda5 >
    [    7.909225] sd 0:0:0:0: [sda] Attached SCSI disk
    [    7.909302] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [    7.909323] sd 1:0:0:0: [sdb] Write Protect is off
    [    7.909326] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    7.909362] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.909425] sd 1:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    [    7.909444] sd 1:0:0:0: [sdb] Write Protect is off
    [    7.909447] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    [    7.909481] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.909485]  sdb: sdb1
    [    7.930551] sd 1:0:0:0: [sdb] Attached SCSI disk
    [    7.930640] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
    [    7.930662] sd 2:0:0:0: [sdc] Write Protect is off
    [    7.930665] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    7.930701] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.930766] sd 2:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
    [    7.930785] sd 2:0:0:0: [sdc] Write Protect is off
    [    7.930788] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
    [    7.930823] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    7.930827]  sdc: sdc1 sdc2 < sdc5 >
    [    8.000911] sd 2:0:0:0: [sdc] Attached SCSI disk
    [    8.017274] ata11.00: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
    [    8.017290] ata11.01: ATAPI: Optiarc DVD RW AD-7170A, 1.02, max UDMA/66
    [    8.017303] ata11: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c50000) ACPI=0x1f01f (30:30:0x1f)
    [    8.017309] ata11: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5c50000) ACPI=0x1f01f (30:30:0x1f)
    [    8.032207] ata11.00: configured for UDMA/66
    [    8.048213] ata11.01: configured for UDMA/66
    [    8.048245] ata12: port disabled. ignoring.
    [    8.049152] scsi 10:0:0:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
    [    8.049314] scsi 10:0:0:0: Attached scsi generic sg3 type 5
    [    8.050285] scsi 10:0:1:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
    [    8.050382] scsi 10:0:1:0: Attached scsi generic sg4 type 5
    [    8.077781] Driver 'sr' needs updating - please use bus_type methods
    [    8.080415] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    8.080421] Uniform CD-ROM driver Revision: 3.20
    [    8.080515] sr 10:0:0:0: Attached scsi CD-ROM sr0
    [    8.082632] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [    8.082696] sr 10:0:1:0: Attached scsi CD-ROM sr1
    [    8.149357] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d80000d68335]
    [    8.338746] PM: Starting manual resume from disk
    [    8.338750] PM: Resume from partition 8:37
    [    8.338752] PM: Checking hibernation image.
    [    8.338913] PM: Resume from disk failed.
    [    8.400824] kjournald starting.  Commit interval 5 seconds
    [    8.400835] EXT3-fs: mounted filesystem with ordered data mode.
    [   13.692346] udevd version 124 started
    [   14.103667] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
    [   14.128594] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
    [   14.159284] ACPI: Power Button (FF) [PWRF]
    [   14.159370] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
    [   14.185021] ACPI: Power Button (CM) [PWRB]
    [   14.300306] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    [   14.300312] ACPI: I/O resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM01 [0x1c40-0x1c45]
    [   14.300315] ACPI: Device needs an ACPI driver
    [   14.300329] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
    [   14.323137] ndiswrapper version 1.53 loaded (smp=yes, preempt=no)
    [   14.392301] Found: PMC Pm49FL004
    [   14.392311] ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
    [   14.498425] number of JEDEC chips: 1
    [   14.498430] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
    [   14.681044] usb 2-2: reset high speed USB device using ehci_hcd and address 3
    [   14.879291] ndiswrapper: driver wlanchag (ZyXEL,08/16/2005, 1.5.0.102) loaded
    [   14.879973] ndiswrapper (ZwQueryValueKey:2330): not fully implemented (yet)
    [   15.179767] parport_pc 00:0a: reported by Plug and Play ACPI
    [   15.179792] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    [   15.446955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [   15.659449] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [   16.472528] input: ImExPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5
    [   17.115098] ALSA /usr/src/alsa/alsa-driver-1.0.19/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:809: Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations
    [   17.115205] firmware: requesting multiface_firmware_rev11.bin
    [   17.147723] ALSA /usr/src/alsa/alsa-driver-1.0.19/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:4932: Hammerfall-DSP: cannot load firmware multiface_firmware_rev11.bin
    [   17.147730] ALSA /usr/src/alsa/alsa-driver-1.0.19/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5072: Hammerfall-DSP: couldn't get firmware from userspace. try using hdsploader
    [   17.147736] ALSA /usr/src/alsa/alsa-driver-1.0.19/pci/rme9652/../../alsa-kernel/pci/rme9652/hdsp.c:5078: Hammerfall-DSP: card initialization pending : waiting for firmware
    [   17.148999] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [   17.217284] Linux agpgart interface v0.103
    [   17.680623] nvidia 0000:02:00.0: setting latency timer to 64
    [   17.680851] NVRM: loading NVIDIA UNIX x86 Kernel Module  177.82  Tue Nov  4 13:35:57 PST 2008
    [   29.949512] ndiswrapper (NdisWriteErrorLogEntry:190): log: C0001389, count: 4, return_address: f9b346eb
    [   29.949518] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0xf6436a00
    [   29.949521] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0x28
    [   29.949523] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0xf9abb000
    [   29.949526] ndiswrapper (NdisWriteErrorLogEntry:193): code: 0xf9abb000
    [   29.949704] ndiswrapper (mp_init:219): couldn't initialize device: C0000001
    [   29.949709] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001)
    [   29.949722] ndiswrapper (mp_halt:262): device f7b36480 is not initialized - not halting
    [   29.949725] ndiswrapper: device eth%d removed
    [   29.949736] ndiswrapper: probe of 2-2:1.0 failed with error -22
    [   29.952434] usbcore: registered new interface driver ndiswrapper
    [   30.682650] lp0: using parport0 (interrupt-driven).
    [   30.737592] ieee80211_crypt: registered algorithm 'NULL'
    [   30.836333] Adding 6064496k swap on /dev/sdc5.  Priority:-1 extents:1 across:6064496k
    [   31.409326] EXT3 FS on sdc1, internal journal
    [   32.485954] type=1505 audit(1232754112.915:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4521
    [   32.668388] type=1505 audit(1232754113.095:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4526
    [   32.668603] type=1505 audit(1232754113.095:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4526
    [   32.796384] ip_tables: (C) 2000-2006 Netfilter Core Team
    [   33.292204] ACPI: WMI: Mapper loaded
    [   33.538444] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
    [   33.538993] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0xe
    [   33.538997] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x10
    [   33.538999] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0x10
    [   33.539002] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
    [   34.307440] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    [   34.354478] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [   34.354485] apm: disabled - APM is not SMP safe.
    [   34.512685] ppdev: user-space parallel port driver
    [   36.001028] Clocksource tsc unstable (delta = -152753661 ns)
    [   36.927431] Bluetooth: Core ver 2.13
    [   36.929352] NET: Registered protocol family 31
    [   36.929363] Bluetooth: HCI device and connection manager initialized
    [   36.929373] Bluetooth: HCI socket layer initialized
    [   36.944935] Bluetooth: L2CAP ver 2.11
    [   36.944947] Bluetooth: L2CAP socket layer initialized
    [   36.972610] Bluetooth: RFCOMM socket layer initialized
    [   36.972727] Bluetooth: RFCOMM TTY layer initialized
    [   36.972732] Bluetooth: RFCOMM ver 1.10
    [   36.973738] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [   36.973750] Bluetooth: BNEP filters: protocol multicast
    [   37.002701] Bridge firewalling registered
    [   37.006966] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
    [   37.028277] Bluetooth: SCO (Voice Link) ver 0.6
    [   37.028290] Bluetooth: SCO socket layer initialized
    [   41.125858] eth1: no link during initialization.
    [   41.127979] eth0: no link during initialization.

  9. #279
    Join Date
    Jan 2009
    Location
    THE LAB ,CA
    Beans
    26
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Talking Re: Comprehensive ndiswrapper troubleshooting guide

    GREAT!!!
    I WANT TO LEARN IT ALL!!

  10. #280
    Join Date
    Aug 2007
    Location
    Paris
    Beans
    5,538
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Comprehensive ndiswrapper troubleshooting guide

    AMTQ: sorry that didn't help.

    The next (and possibly last...) thing that I can think to try is to blacklist the ohci_hcd (low-speed USB) driver. I think it might be conflicting with ehci_hcd, the high-speed USB driver. Please run this command to blacklist ohci_hcd:
    Code:
    echo ohci_hcd | sudo tee -a /etc/modprobe.d/blacklist
    Then reboot. Any luck now?

Page 28 of 121 FirstFirst ... 1826272829303878 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •