Results 1 to 5 of 5

Thread: What TV Card in HP m8430f

  1. #1
    Join Date
    Jan 2008
    Beans
    24
    Distro
    Ubuntu 10.04 Lucid Lynx

    What TV Card in HP m8430f

    Does anyone know what brand TV card is in the MP Pavilion Media Centre m8430f? The HP website simply says it is a "PCI Express x1 TV tuner card". Futureshop lists the card as "NTSC/ATSC/FM" capable. I am considering this system for a Mythtv Backend. Thanks.

  2. #2
    Join Date
    Apr 2007
    Location
    Denmark
    Beans
    2,948
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: What TV Card in HP m8430f

    In terminal:
    lspci -vv
    and show the output.

  3. #3
    Join Date
    Jan 2008
    Beans
    24
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: What TV Card in HP m8430f

    I'm sorry. I wasn't clear. I don't have the system yet, but am considering purchasing it, if it will play nice with Mythtv.

  4. #4
    Join Date
    Dec 2005
    Beans
    231
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: What TV Card in HP m8430f

    In case someone comes back and wonders.

    Code:
    00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    	Latency: 0
    	Capabilities: [e0] Vendor Specific Information
    
    00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
    	I/O behind bridge: 0000d000-0000dfff
    	Memory behind bridge: fa000000-feafffff
    	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
    	Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000
    	Capabilities: [80] Power Management version 3
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    		Address: fee0f00c  Data: 41c1
    	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <64ns, L1 <1us
    		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 2
    		Link: Latency L0s <256ns, L1 <4us
    		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    		Link: Speed 2.5Gb/s, Width x16
    		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
    		Slot: Number 0, PowerLimit 75.000000
    		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    		Slot: AttnInd Off, PwrInd On, Power-
    		Root: Correctable- Non-Fatal- Fatal- PME-
    
    00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 16
    	Region 4: I/O ports at a400 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) (prog-if 00 [UHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin B routed to IRQ 20
    	Region 4: I/O ports at a480 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) (prog-if 20 [EHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin C routed to IRQ 18
    	Region 0: Memory at f9dfec00 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: [50] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [58] Debug port
    	Capabilities: [98] #13 [0306]
    
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 23
    	Region 0: Memory at f9df4000 (64-bit, non-prefetchable) [size=16K]
    	Capabilities: [50] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    		Address: 0000000000000000  Data: 0000
    	Capabilities: [70] Express Unknown type IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <64ns, L1 <1us
    		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
    		Link: Latency L0s <64ns, L1 <1us
    		Link: ASPM Disabled CommClk- ExtSynch-
    		Link: Speed unknown, Width x0
    
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
    	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    	Capabilities: [40] Express Root Port (Slot+) IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <64ns, L1 <1us
    		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
    		Link: Latency L0s <1us, L1 <4us
    		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
    		Link: Speed 2.5Gb/s, Width x0
    		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    		Slot: Number 0, PowerLimit 10.000000
    		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    		Slot: AttnInd Unknown, PwrInd Unknown, Power-
    		Root: Correctable- Non-Fatal- Fatal- PME-
    	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    		Address: fee0f00c  Data: 41c9
    	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Capabilities: [a0] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    	Memory behind bridge: f9f00000-f9ffffff
    	Prefetchable memory behind bridge: 00000000cff00000-00000000cfffffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    	Capabilities: [40] Express Root Port (Slot+) IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <64ns, L1 <1us
    		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
    		Link: Latency L0s <256ns, L1 <4us
    		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    		Link: Speed 2.5Gb/s, Width x1
    		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    		Slot: Number 0, PowerLimit 10.000000
    		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    		Slot: AttnInd Unknown, PwrInd Unknown, Power-
    		Root: Correctable- Non-Fatal- Fatal- PME-
    	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    		Address: fee0f00c  Data: 41d1
    	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Capabilities: [a0] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) (prog-if 00 [Normal decode])
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    	I/O behind bridge: 0000e000-0000efff
    	Memory behind bridge: feb00000-febfffff
    	Prefetchable memory behind bridge: 00000000f8f00000-00000000f8ffffff
    	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    	Capabilities: [40] Express Root Port (Slot+) IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <64ns, L1 <1us
    		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
    		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
    		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
    		Link: Latency L0s <256ns, L1 <4us
    		Link: ASPM L0s Enabled RCB 64 bytes CommClk+ ExtSynch-
    		Link: Speed 2.5Gb/s, Width x1
    		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
    		Slot: Number 0, PowerLimit 10.000000
    		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
    		Slot: AttnInd Unknown, PwrInd Unknown, Power-
    		Root: Correctable- Non-Fatal- Fatal- PME-
    	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
    		Address: fee0f00c  Data: 41d9
    	Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Capabilities: [a0] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 19
    	Region 4: I/O ports at a800 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin B routed to IRQ 21
    	Region 4: I/O ports at a880 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin C routed to IRQ 18
    	Region 4: I/O ports at ac00 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) (prog-if 00 [UHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin D routed to IRQ 16
    	Region 4: I/O ports at b000 [size=32]
    	Capabilities: [50] #13 [0306]
    
    00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) (prog-if 20 [EHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 19
    	Region 0: Memory at f9dff800 (32-bit, non-prefetchable) [size=1K]
    	Capabilities: [50] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [58] Debug port
    	Capabilities: [98] #13 [0306]
    
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) (prog-if 01 [Subtractive decode])
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    	I/O behind bridge: 0000c000-0000cfff
    	Memory behind bridge: f9e00000-f9efffff
    	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
    	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    	Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device 2a6f
    
    00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Capabilities: [e0] Vendor Specific Information
    
    00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller (rev 02)
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin B routed to IRQ 219
    	Region 0: I/O ports at b880 [size=8]
    	Region 1: I/O ports at b800 [size=4]
    	Region 2: I/O ports at b480 [size=8]
    	Region 3: I/O ports at b400 [size=4]
    	Region 4: I/O ports at b080 [size=32]
    	Region 5: Memory at f9dff000 (32-bit, non-prefetchable) [size=2K]
    	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/4 Enable+
    		Address: fee0f00c  Data: 413a
    	Capabilities: [70] Power Management version 3
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [a8] #12 [0010]
    	Capabilities: [b0] #13 [0306]
    
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Interrupt: pin C routed to IRQ 10
    	Region 0: Memory at f9dffc00 (64-bit, non-prefetchable) [size=256]
    	Region 4: I/O ports at 0400 [size=32]
    
    01:00.0 Communication controller: Conexant HSF 56k Data/Fax Modem
    	Subsystem: Conexant Unknown device 200c
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 64
    	Interrupt: pin A routed to IRQ 5
    	Region 0: Memory at f9ee0000 (32-bit, non-prefetchable) [size=64K]
    	Region 1: I/O ports at cc00 [size=8]
    	Capabilities: [40] Power Management version 2
    		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    
    01:05.0 FireWire (IEEE 1394): Agere Systems FW323 (rev 70) (prog-if 10 [OHCI])
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 22
    	Region 0: Memory at f9eff000 (32-bit, non-prefetchable) [size=4K]
    	Capabilities: [44] Power Management version 2
    		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
    
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
    	Subsystem: Hewlett-Packard Company Unknown device 2a6f
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 18
    	Region 0: I/O ports at e800 [size=256]
    	Region 2: Memory at febff000 (64-bit, non-prefetchable) [size=4K]
    	Region 4: Memory at f8ff0000 (64-bit, prefetchable) [size=64K]
    	Expansion ROM at febc0000 [disabled] [size=128K]
    	Capabilities: [40] Power Management version 3
    		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    		Address: 0000000000000000  Data: 0000
    	Capabilities: [70] Express Endpoint IRQ 1
    		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <512ns, L1 <8us
    		Device: AtnBtn- AtnInd- PwrInd-
    		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
    		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
    		Link: Latency L0s <512ns, L1 <64us
    		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
    		Link: Speed 2.5Gb/s, Width x1
    	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
    		Vector table: BAR=4 offset=00000000
    		PBA: BAR=4 offset=00000800
    	Capabilities: [d0] Vital Product Data
    
    03:00.0 Multimedia controller: ViXS Systems, Inc. Unknown device 2100
    	Subsystem: ASUSTeK Computer Inc. Unknown device 48b0
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0, Cache Line Size: 32 bytes
    	Interrupt: pin A routed to IRQ 5
    	Region 0: Memory at cff00000 (64-bit, prefetchable) [size=1M]
    	Region 2: Memory at f9ff0000 (32-bit, non-prefetchable) [size=64K]
    	Region 4: I/O ports at <unassigned>
    	Capabilities: [40] Power Management version 2
    		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1+,D2-,D3hot+,D3cold-)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    		Address: 0000000000000000  Data: 0000
    	Capabilities: [60] Express Endpoint IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
    		Device: Latency L0s <128ns, L1 <2us
    		Device: AtnBtn- AtnInd- PwrInd-
    		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
    		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
    		Link: Latency L0s <4us, L1 <64us
    		Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
    		Link: Speed 2.5Gb/s, Width x1
    
    05:00.0 VGA compatible controller: nVidia Corporation GeForce 8500 GT (rev a1) (prog-if 00 [VGA controller])
    	Subsystem: ASUSTeK Computer Inc. Unknown device 034f
    	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    	Latency: 0
    	Interrupt: pin A routed to IRQ 16
    	Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
    	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
    	Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
    	Region 5: I/O ports at dc00 [size=128]
    	[virtual] Expansion ROM at feae0000 [disabled] [size=128K]
    	Capabilities: [60] Power Management version 2
    		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
    		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
    	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
    		Address: 0000000000000000  Data: 0000
    	Capabilities: [78] Express Endpoint IRQ 0
    		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
    		Device: Latency L0s <512ns, L1 <4us
    		Device: AtnBtn- AtnInd- PwrInd-
    		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
    		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
    		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
    		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
    		Link: Latency L0s <512ns, L1 <4us
    		Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
    		Link: Speed 2.5Gb/s, Width x16


    And quite a nice computer besides. Very good graphics card coming with it, and once you blow off vista (ucky vista) it's very speedy and gorgeous.
    If the box says "Needs Windows 2000 or better" why won't it work on Linux?

    There are 10 types of people...those who understand binary, and those who don't.

  5. #5
    Join Date
    Dec 2005
    Beans
    231
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: What TV Card in HP m8430f

    Oh, and that card doesn't look supported on linuxtv.org.

    Here's another thread that looks at it.

    http://ubuntuforums.org/showthread.php?t=826572
    If the box says "Needs Windows 2000 or better" why won't it work on Linux?

    There are 10 types of people...those who understand binary, and those who don't.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •