Code:
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005bee0000 (usable)
[ 0.000000] BIOS-e820: 000000005bee0000 - 000000005bee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005bee3000 - 000000005bef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005bef0000 - 000000005bf00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 574MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5070
[ 0.000000] Entering add_active_range(0, 0, 376544) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 376544
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 376544
[ 0.000000] On node 0 totalpages: 376544
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1149 pages used for memmap
[ 0.000000] HighMem zone: 146019 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
[ 0.000000] Processor #0 15:12 APIC version 17
[ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000.
[ 0.000000] I/O APIC #3 Version 17 at 0xFECC0000.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 5bf00000:84100000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 373603
[ 0.000000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz acpi=off noapic file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.gz quiet splash -- locale=zh_TW
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fecc0000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1600.062 MHz processor.
[ 170.110702] Console: colour VGA+ 80x25
[ 170.110706] console [tty0] enabled
[ 170.111215] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 170.112096] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 170.173387] Memory: 1480716k/1506176k available (2157k kernel code, 24360k reserved, 998k data, 364k init, 588672k highmem)
[ 170.173397] virtual kernel memory layout:
[ 170.173398] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 170.173399] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 170.173401] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 170.173402] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 170.173403] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 170.173405] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 170.173406] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 170.173409] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 170.173454] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 170.253360] Calibrating delay using timer specific routine.. 3203.46 BogoMIPS (lpj=6406924)
[ 170.253391] Security Framework initialized
[ 170.253399] SELinux: Disabled at boot.
[ 170.253417] AppArmor: AppArmor initialized
[ 170.253421] Failure registering capabilities with primary security module.
[ 170.253430] Mount-cache hash table entries: 512
[ 170.253565] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
[ 170.253575] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 170.253577] CPU: L2 Cache: 256K (64 bytes/line)
[ 170.253581] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001 00000000
[ 170.253592] Compat vDSO mapped to ffffe000.
[ 170.253605] Checking 'hlt' instruction... OK.
[ 170.269659] SMP alternatives: switching to UP code
[ 170.270925] Freeing SMP alternatives: 11k freed
[ 170.271061] Early unpacking initramfs... done
[ 170.670365] CPU0: AMD Sempron(tm) Processor 2800+ stepping 02
[ 170.670389] Total of 1 processors activated (3203.46 BogoMIPS).
[ 170.884469] Brought up 1 CPUs
[ 170.884491] CPU0 attaching sched-domain:
[ 170.884493] domain 0: span 01
[ 170.884495] groups: 01
[ 170.884671] net_namespace: 64 bytes
[ 170.884677] Booting paravirtualized kernel on bare hardware
[ 170.885198] Time: 21:28:52 Date: 05/18/08
[ 170.885224] NET: Registered protocol family 16
[ 170.885402] EISA bus registered
[ 170.893934] PCI: PCI BIOS revision 3.00 entry at 0xfb820, last bus=3
[ 170.893936] PCI: Using configuration type 1
[ 170.893938] Setting up standard PCI resources
[ 170.896598] ACPI: Interpreter disabled.
[ 170.896602] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 170.896629] pnp: PnP ACPI: disabled
[ 170.896633] PnPBIOS: Scanning system for PnP BIOS support...
[ 170.896916] PnPBIOS: Found PnP BIOS installation structure at 0xc00fc450
[ 170.896923] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc480, dseg 0xf0000
[ 170.897708] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
[ 170.897898] PCI: Probing PCI hardware
[ 170.897903] PCI: Probing PCI hardware (bus 00)
[ 170.968397] NET: Registered protocol family 8
[ 170.968400] NET: Registered protocol family 20
[ 170.968469] AppArmor: AppArmor Filesystem Enabled
[ 170.968511] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[ 170.968515] system 00:07: iomem range 0xfffe0000-0xffffffff could not be reserved
[ 170.968518] system 00:07: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 170.968522] system 00:07: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 170.968525] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[ 170.968532] system 00:08: iomem range 0xf0000-0xf3fff could not be reserved
[ 170.968535] system 00:08: iomem range 0xf4000-0xf7fff could not be reserved
[ 170.968538] system 00:08: iomem range 0xf8000-0xfffff could not be reserved
[ 170.968541] system 00:08: iomem range 0xd1000-0xd3fff has been reserved
[ 170.968908] PCI: Bridge: 0000:00:01.0
[ 170.968911] IO window: c000-cfff
[ 170.968916] MEM window: dd000000-deffffff
[ 170.968920] PREFETCH window: c0000000-cfffffff
[ 170.968925] PCI: Bridge: 0000:00:02.0
[ 170.968927] IO window: e000-efff
[ 170.968932] MEM window: dfc00000-dfcfffff
[ 170.968935] PREFETCH window: dfb00000-dfbfffff
[ 170.968939] PCI: Bridge: 0000:00:03.0
[ 170.968942] IO window: d000-dfff
[ 170.968947] MEM window: dfe00000-dfefffff
[ 170.968951] PREFETCH window: dfd00000-dfdfffff
[ 170.968969] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 170.968984] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 170.969002] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 170.969014] NET: Registered protocol family 2
[ 170.972296] Time: tsc clocksource has been installed.
[ 171.004334] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 171.004671] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 171.005909] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 171.006539] TCP: Hash tables configured (established 131072 bind 65536)
[ 171.006543] TCP reno registered
[ 171.016384] checking if image is initramfs... it is
[ 171.786134] Freeing initrd memory: 7665k freed
[ 171.786756] audit: initializing netlink socket (disabled)
[ 171.786770] audit(1211146132.508:1): initialized
[ 171.786927] highmem bounce pool size: 64 pages
[ 171.788614] VFS: Disk quotas dquot_6.5.1
[ 171.788687] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 171.788873] io scheduler noop registered
[ 171.788875] io scheduler anticipatory registered
[ 171.788878] io scheduler deadline registered
[ 171.788888] io scheduler cfq registered (default)
[ 171.788901] PCI: VIA PCI bridge detected. Disabling DAC.
[ 171.788976] Boot video device is 0000:01:00.0
[ 171.789087] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 171.789122] assign_interrupt_mode Found MSI capability
[ 171.789166] Allocate Port Service[0000:00:02.0:pcie00]
[ 171.789199] Allocate Port Service[0000:00:02.0:pcie02]
[ 171.789272] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 171.789313] assign_interrupt_mode Found MSI capability
[ 171.789360] Allocate Port Service[0000:00:03.0:pcie00]
[ 171.789389] Allocate Port Service[0000:00:03.0:pcie02]
[ 171.789581] isapnp: Scanning for PnP cards...
[ 172.143257] isapnp: No Plug & Play device found
[ 172.170120] Real Time Clock Driver v1.12ac
[ 172.170189] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 172.170304] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 172.170922] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 172.171631] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 172.171698] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 172.171792] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 172.172101] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 172.172106] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 172.174763] mice: PS/2 mouse device common for all mice
[ 172.174877] EISA: Probing bus 0 at eisa.0
[ 172.174916] EISA: Detected 0 cards.
[ 172.174919] cpuidle: using governor ladder
[ 172.174921] cpuidle: using governor menu
[ 172.175016] NET: Registered protocol family 1
[ 172.175045] Using IPI No-Shortcut mode
[ 172.175075] registered taskstats version 1
[ 172.175169] Magic number: 8:500:500
[ 172.175321] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 172.175323] EDD information not available.
[ 172.175591] Freeing unused kernel memory: 364k freed
[ 172.206461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 173.477419] fuse init (API version 7.9)
[ 173.525225] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 173.924642] SCSI subsystem initialized
[ 173.988418] libata version 3.00 loaded.
[ 174.003840] usbcore: registered new interface driver usbfs
[ 174.003862] usbcore: registered new interface driver hub
[ 174.035739] usbcore: registered new device driver usb
[ 174.055772] sata_via 0000:00:0f.0: version 2.3
[ 174.055827] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 174.077324] scsi0 : sata_via
[ 174.085337] USB Universal Host Controller Interface driver v3.0
[ 174.095995] scsi1 : sata_via
[ 174.096044] ata1: SATA max UDMA/133 cmd 0xff00 ctl 0xfe00 bmdma 0xfb00 irq 11
[ 174.096047] ata2: SATA max UDMA/133 cmd 0xfd00 ctl 0xfc00 bmdma 0xfb08 irq 11
[ 174.146982] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 174.146989] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 174.299309] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 174.355597] FDC 0 is a post-1991 82077
[ 174.490397] ata1.00: ATA-7: WDC WD3200YS-01PGB0, 21.00M21, max UDMA/133
[ 174.490403] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1)
[ 174.495415] ata1.00: configured for UDMA/133
[ 174.698715] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 174.710111] scsi 0:0:0:0: Direct-Access ATA WDC WD3200YS-01P 21.0 PQ: 0 ANSI: 5
[ 174.710336] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 174.710560] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 174.710586] uhci_hcd 0000:00:10.0: irq 10, io base 0x0000f900
[ 174.710729] usb usb1: configuration #1 chosen from 1 choice
[ 174.710755] hub 1-0:1.0: USB hub found
[ 174.710761] hub 1-0:1.0: 2 ports detected
[ 174.814652] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 174.814678] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 174.814701] uhci_hcd 0000:00:10.1: irq 10, io base 0x0000f800
[ 174.814823] usb usb2: configuration #1 chosen from 1 choice
[ 174.814848] hub 2-0:1.0: USB hub found
[ 174.814853] hub 2-0:1.0: 2 ports detected
[ 174.918488] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 174.918514] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 174.918537] uhci_hcd 0000:00:10.2: irq 11, io base 0x0000f700
[ 174.918656] usb usb3: configuration #1 chosen from 1 choice
[ 174.918679] hub 3-0:1.0: USB hub found
[ 174.918685] hub 3-0:1.0: 2 ports detected
[ 175.018587] Driver 'sd' needs updating - please use bus_type methods
[ 175.018672] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 175.018685] sd 0:0:0:0: [sda] Write Protect is off
[ 175.018688] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 175.018704] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 175.018749] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 175.018758] sd 0:0:0:0: [sda] Write Protect is off
[ 175.018761] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 175.018774] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 175.018778] sda:<6>uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 175.022360] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 175.022385] uhci_hcd 0000:00:10.3: irq 11, io base 0x0000f600
[ 175.022548] usb usb4: configuration #1 chosen from 1 choice
[ 175.022572] hub 4-0:1.0: USB hub found
[ 175.022578] hub 4-0:1.0: 2 ports detected
[ 175.022600] sda1 sda2 < sda5 sda6 sda7 >
[ 175.054813] sd 0:0:0:0: [sda] Attached SCSI disk
[ 175.061519] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 175.126545] pata_via 0000:00:0f.1: version 0.3.3
[ 175.128725] scsi2 : pata_via
[ 175.129605] scsi3 : pata_via
[ 175.129650] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 175.129654] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 180.314255] ata3: port is slow to respond, please be patient (Status 0xd0)
[ 185.123038] ata3: SRST failed (errno=-16)
[ 185.830544] ata4.00: ATA-6: ST380023A, 3.31, max UDMA/100
[ 185.830549] ata4.00: 156301488 sectors, multi 16: LBA
[ 185.830569] ata4.01: ATAPI: JLMS XJ-HD166S, DS1E, max UDMA/33
[ 185.830581] ata4.00: limited to UDMA/33 due to 40-wire cable
[ 185.846817] ata4.00: configured for UDMA/33
[ 186.009921] ata4.01: configured for UDMA/33
[ 186.010031] scsi 3:0:0:0: Direct-Access ATA ST380023A 3.31 PQ: 0 ANSI: 5
[ 186.010440] sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 186.010453] sd 3:0:0:0: [sdb] Write Protect is off
[ 186.010456] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 186.010472] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 186.010520] sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB)
[ 186.010530] sd 3:0:0:0: [sdb] Write Protect is off
[ 186.010532] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 186.010547] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 186.010551] sdb: sdb1
[ 186.019086] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 186.019121] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 186.019883] scsi 3:0:1:0: CD-ROM JLMS XJ-HD166S DS1E PQ: 0 ANSI: 5
[ 186.019952] scsi 3:0:1:0: Attached scsi generic sg2 type 5
[ 186.020109] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 186.020138] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 186.020183] ehci_hcd 0000:00:10.4: irq 5, io mem 0xdffff000
[ 186.029697] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 186.029818] usb usb5: configuration #1 chosen from 1 choice
[ 186.029844] hub 5-0:1.0: USB hub found
[ 186.029850] hub 5-0:1.0: 8 ports detected
[ 186.041714] Driver 'sr' needs updating - please use bus_type methods
[ 186.042978] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 186.042984] Uniform CD-ROM driver Revision: 3.20
[ 186.043040] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 186.133992] eth0: VIA Rhine II at 0xdfffe000, 00:30:18:a0:36:87, IRQ 10.
[ 186.134704] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 186.416348] kjournald starting. Commit interval 5 seconds
[ 186.416364] EXT3-fs: mounted filesystem with ordered data mode.
[ 186.765571] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 186.789324] ISO 9660 Extensions: RRIP_1991A
[ 186.994864] Registering unionfs 1.4
[ 186.994868] unionfs: debugging is not enabled
[ 187.008463] loop: module loaded
[ 187.253068] squashfs: version 3.3 (2007/10/31) Phillip Lougher
[ 254.512399] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 254.693400] Linux agpgart interface v0.102
[ 254.884237] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 255.143248] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 255.196122] agpgart: Detected VIA VT3336 chipset
[ 255.200387] agpgart: AGP aperture is 128M @ 0xd0000000
[ 256.247572] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
[ 257.602812] parport_pc 00:0d: reported by Plug and Play BIOS
[ 257.602865] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 258.947808] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 261.769313] Adding 2096440k swap on /dev/sda5. Priority:-1 extents:1 across:2096440k
[ 263.700531] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 265.896789] powernow_k8: Unknown symbol acpi_processor_notify_smm
[ 265.896844] powernow_k8: Unknown symbol acpi_processor_unregister_performance
[ 265.896941] powernow_k8: Unknown symbol acpi_processor_register_performance
[ 265.940713] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 265.940765] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 265.940926] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 265.941001] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 268.885434] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 269.120000] lp0: using parport0 (interrupt-driven).
[ 269.212575] ppdev: user-space parallel port driver
[ 277.063813] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 277.260765] Bluetooth: Core ver 2.11
[ 277.275868] NET: Registered protocol family 31
[ 277.275874] Bluetooth: HCI device and connection manager initialized
[ 277.275879] Bluetooth: HCI socket layer initialized
[ 277.468486] Bluetooth: L2CAP ver 2.9
[ 277.468491] Bluetooth: L2CAP socket layer initialized
[ 277.635721] Bluetooth: RFCOMM socket layer initialized
[ 277.635740] Bluetooth: RFCOMM TTY layer initialized
[ 277.635742] Bluetooth: RFCOMM ver 1.8
[ 285.998179] NET: Registered protocol family 17
[ 289.435078] [drm] Initialized drm 1.1.0 20060810
[ 289.506212] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 289.512127] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 289.512153] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 289.512236] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 291.696263] NET: Registered protocol family 10
[ 291.697161] lo: Disabled Privacy Extensions
[ 302.234657] eth0: no IPv6 routers present
[ 355.987386] program gparted is using a deprecated SCSI ioctl, please convert it to SG_IO
Ubuntu 8.04 can't detect all my IDE harddisks
Adv Reply
Solution
Originally Posted by slayer^_^
Bookmarks