[SOLVED] xorg file help

[ktechman]

I need a good xorg file to look at and repair mine or write a new one myself, and maybe just a bit of an explaination. Here is how my rig is set up,

Gutsy amd64
AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ \ 4-Gig of 667 memory
NVidia GeForce 7600 GS Dual 1-DVI-1-Analog head
19" Acer Flat DVI or Analog
32" Vizio with Analog RGB in (25' monitor cable) for 32 only

Do I need to go to the manufacture website to retrieve all of the relevant data about the flat panels? What other info would be helpful? Here is my present xorg file. It is the failsafe one and works but the resolutions are a bit skewed.

 # nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildmeister@builder26)  Thu Feb 14 18:14:18 PST 2008

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder26)  Thu Feb 14 18:13:41 PST 2008
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"
EndSection

Section "Module"
    Load           "glx"
    Load           "v4l"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ImPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier     "Failsafe Monitor"
    VendorName     "Generic LCD Display"
    ModelName      "LCD Panel 1440x900"
    HorizSync       31.5 - 56.0
    VertRefresh     56.0 - 65.0
    Gamma           1
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "1280x768@60" 80.1 1280 1344 1480 1680 768 769 772 795 -hsync +vsync
    ModeLine       "1280x720@60" 74.5 1280 1336 1472 1664 720 721 724 746 -hsync +vsync
    ModeLine       "1280x800@60" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
    ModeLine       "1440x900@60" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
EndSection

Section "Monitor"

	#    
    Identifier     "monitor1"
    VendorName     "Generic LCD Display"
    ModelName      "LCD Panel 1024x768"
    HorizSync       31.5 - 48.0
    VertRefresh     56.0 - 65.0
    Gamma           1
    ModeLine       "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
    ModeLine       "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    ModeLine       "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    ModeLine       "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Acer P191W"
    HorizSync       30.0 - 83.0
    VertRefresh     55.0 - 75.0
EndSection

Section "Device"
    Identifier     "Failsafe Device"
    Driver         "nvidia"
    BoardName      "vesa"
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    BusID          "PCI:1:0:0"
    Screen          0
EndSection

Section "Device"

	#    
    Identifier     "device1"
    Driver         "vesa"
    BoardName      "vesa"
    BusID          "PCI:1:0:0"
    Screen          1
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GS"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Failsafe Device"
    Monitor        "Failsafe Monitor"
    DefaultDepth    24
    Option         "AddARGBVisuals" "True"
    Option         "AddARGBGLXVisuals" "True"
    Option         "NoLogo" "True"
    SubSection     "Display"
        Virtual     1440 900
        Depth       24
        Modes      "1440x900@60" "1280x800@60" "1280x720@60" "1280x768@60" "800x600@60" "800x600@56"
    EndSubSection
EndSection

Section "Screen"

	#    
    Identifier     "screen1"
    Device         "device1"
    Monitor        "monitor1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes      "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
    EndSubSection
EndSection

Section "Screen"

# Removed Option "metamodes" "DFP: 1440x900@60 +0+0, CRT: nvidia-auto-select +1440+0; DFP: 1280x800@60 +0+0, CRT: nvidia-auto-select +1280+0; DFP: 1280x720@60 +0+0, CRT: nvidia-auto-select +1280+0; DFP: 1280x768@60 +0+0, CRT: nvidia-auto-select +1280+0; DFP: 800x600@60 +0+0, CRT: nvidia-auto-select +800+0; DFP: 800x600@56 +0+0, CRT: nvidia-auto-select +800+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "DFP-0"
    Option         "metamodes" "DFP: nvidia-auto-select +0+0, CRT: nvidia-auto-select +1440+0"
EndSection