HOWTO: Latest NVIDIA drivers on Ubuntu Breezy

**Jimmzone** · August 27th, 2006

I added extra repository in the Synaptic package manager, so the maneger updated the source list, when I left it.
I erase these lines in the xorg.conf:

Code:

    Option         "SWcursor"
    Option         "NoRenderExtension"

Then I tried point 9 of the Problems Section, but problems exist,

My current source.list file:
sources.list.txt

My current xorg.cong file:
xorg.conf.txt

What is wrong in these file?

**beetee2** · September 1st, 2006

Hey everyone. First of all, I just want to say what a cool community ubuntu has behind it

I've had ubuntu for 2 days (LOL) and I'm trying to get my video card configured properly. I ran automatix, but I think I'm still having issues. I have an Nvidia 7600 GT.

Here's what I get:
1) 0000:01:00.0 0300: 10de:0391 (rev a1)
2) 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0391 (rev a1)

So I've downloaded the new Nvidia drivers, and I can run the install file and everything, but I can't stop the Xserver. I've tried sudo -i and then running init 3, but to no avail. Every time I try to install the drivers I get this message:

"An NVIDIA kernel module 'nvidia' appears to already be loaded in your kernel. This may be because it is in use (for example, by the X server), but may also happen if your kernel was configured without support for module unloading. Please be sure you have exited X before attempting to upgrade your driver. If you have exited X, know that your kernel supports module unloading, and still receive this message, then an error may have occured that has corrupted the NVIDIA kernel module's usage count; the simplest remedy is to reboot your computer."

So clearly I need to stop the Xserver, I just can't figure out a way to do it. If anyone has any suggestions I'm all ears.

**WelshChris** · September 1st, 2006

Ubuntu, derived from Debian, follows Debian policy when it comes to runlevels, a policy which is at odds with RH, Mandriva and others, which you may be familiar with.

In other distributions, generally speaking, runlevel 3 is reserved for multi-user console login, whilst runlevel 5 is reserved for display manager use, such as kdm or gdm.

Ubuntu's different - runlevels 2-5 are identical, and all load the x display manager.

You can create an x free (ha) runlevel by removing the startup scripts which mention xdm, kdm or gdm from e.g. /etc/rc2.d/

However, that's not the full story, since Debian (or Ubuntu) doesn't include kill scripts in the runlevel directories. So, upon changing runlevels, no services are killed, and xdm persists. Maybe you could try switching to runlevel 3 (from which you've removed the xdm scripts) and then killing the Xserver explicitly. A dirty way of doing things. There must be a better way of doing it, and I expect I'll find out soon.

Note - I'm a beginner at using Debian derived distros, so take what I say with a pinch of salt! You might try looking up
http://www.debian.org/doc/debian-policy
or search for debian runlevels.

**glennric** · September 2nd, 2006

Originally Posted by WelshChris

Ubuntu, derived from Debian, follows Debian policy when it comes to runlevels, a policy which is at odds with RH, Mandriva and others, which you may be familiar with.

In other distributions, generally speaking, runlevel 3 is reserved for multi-user console login, whilst runlevel 5 is reserved for display manager use, such as kdm or gdm.

Ubuntu's different - runlevels 2-5 are identical, and all load the x display manager.

You can create an x free (ha) runlevel by removing the startup scripts which mention xdm, kdm or gdm from e.g. /etc/rc2.d/

However, that's not the full story, since Debian (or Ubuntu) doesn't include kill scripts in the runlevel directories. So, upon changing runlevels, no services are killed, and xdm persists. Maybe you could try switching to runlevel 3 (from which you've removed the xdm scripts) and then killing the Xserver explicitly. A dirty way of doing things. There must be a better way of doing it, and I expect I'll find out soon.

Note - I'm a beginner at using Debian derived distros, so take what I say with a pinch of salt! You might try looking up
http://www.debian.org/doc/debian-policy
or search for debian runlevels.

Try changing the name of the script to Kwhatever. For example to stop gdm from running move S13gdm to K13gdm. You might also have to change the number. I think I actually had to move it to K01gdm. I did this in rc2.d a long time ago.

**tseliot** · September 2nd, 2006

Originally Posted by beetee2

Hey everyone. First of all, I just want to say what a cool community ubuntu has behind it

I've had ubuntu for 2 days (LOL) and I'm trying to get my video card configured properly. I ran automatix, but I think I'm still having issues. I have an Nvidia 7600 GT.

Here's what I get:
1) 0000:01:00.0 0300: 10de:0391 (rev a1)
2) 0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0391 (rev a1)

So I've downloaded the new Nvidia drivers, and I can run the install file and everything, but I can't stop the Xserver. I've tried sudo -i and then running init 3, but to no avail. Every time I try to install the drivers I get this message:

"An NVIDIA kernel module 'nvidia' appears to already be loaded in your kernel. This may be because it is in use (for example, by the X server), but may also happen if your kernel was configured without support for module unloading. Please be sure you have exited X before attempting to upgrade your driver. If you have exited X, know that your kernel supports module unloading, and still receive this message, then an error may have occured that has corrupted the NVIDIA kernel module's usage count; the simplest remedy is to reboot your computer."

So clearly I need to stop the Xserver, I just can't figure out a way to do it. If anyone has any suggestions I'm all ears.

This guide is for Ubuntu Breezy ONLY.

**glennric** · September 3rd, 2006

tseliot

In a terminal type:

Code:

sudo /etc/init.d/gdm stop

**brokenthorn** · October 13th, 2006

tseliot (hi there!) and all other people: I'm back to Ubuntu! Please welcome me with open hands and kindness and feed me well, give me lotsa wine and a good bed and I shall promise I will no longer use Gentoo. 8)

**caijunfu** · October 27th, 2006

I still can't install Nvidia driver for my ubuntu and I can't adjust my resolution to 1440*900 either. Sad....

I have tried almost every method including using Envy. But it doesnt work after reboot.

my /var/log/Xorg.0.log is: (deleted some unimportant lines)

Code:

X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.12 i686
Current Operating System: Linux caijunfu-desktop 2.6.15-27-386 #1 PREEMPT Sat Sep 16 01:51:59 UTC 2006 i686
Build Date: 16 March 2006
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 27 11:21:15 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "Generic Monitor"
(**) |   |-->Device "NVIDIA Corporation NV34 [GeForce FX 5200]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "stylus"
(**) |-->Input Device "cursor"
(**) |-->Input Device "eraser"
(WW) The directory "/usr/share/X11/fonts/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to "/usr/share/X11/fonts/misc,/usr/share/X11/fonts/100dpi/:unscaled,/usr/share/X11/fonts/75dpi/:unscaled,/usr/share/X11/fonts/Type1,/usr/share/X11/fonts/100dpi,/usr/share/X11/fonts/75dpi,/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.2
    X.Org Video Driver: 0.8
    X.Org XInput driver : 0.5
    X.Org Server Extension : 0.2
    X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.8
(--) using VT number 7


(II) Loading /usr/lib/xorg/modules/libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.0.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.8776
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "nv"
(II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
(II) Module nv: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.1
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 0.8
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 6.99.99.904, module version = 1.0.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
    compiled for 4.3.99.902, module version = 1.0.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.5
(II) Wacom driver level: 47-0.7.2 $
(II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 GT, GeForce 6800 GT,
    GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000, GeForce 6800 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 XT, GeForce Go 6800,
    GeForce Go 6800 Ultra, Quadro FX Go1400, Quadro FX 3450/4000 SDI,
    Quadro FX 1400, GeForce 6600 GT, GeForce 6600, GeForce 6600 LE,
    GeForce 6600 VE, GeForce Go 6600, GeForce 6610 XL,
    GeForce Go 6600 TE/6200 TE, GeForce 6700 XL, GeForce Go 6600,
    GeForce Go 6600 GT, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT, GeForce 6200,
    GeForce 7800 GTX, GeForce 7800 GTX, GeForce 7800 GT, GeForce 7800 GS,
    GeForce 7800 SLI, GeForce Go 7800, GeForce Go 7800 GTX,
    Quadro FX 4500, GeForce 7300 LE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, Quadro NVS 110M, Quadro NVS 120M, Quadro FX 350M,
    Quadro FX 350, GeForce 7300 GS, GeForce Go 7600, GeForce Go 7600 GT,
    Quadro NVS 300M, Quadro FX 550M, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M, GeForce 6150,
    GeForce 6150 LE, GeForce 6100, GeForce Go 6150, GeForce Go 6100
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset GeForce FX 5200 found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xdffffb00 - 0xdffffbff (0x100) MX[b]
    [5] -1    0    0xdffffc00 - 0xdfffffff (0x400) MX[b]
    [6] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1    0    0xdfee0000 - 0xdfefffff (0x20000) MX[b](B)
    [8] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [9] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
    [10] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [11] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [12] -1    0    0x0000dc00 - 0x0000dcff (0x100) IX[b]
    [13] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [14] -1    0    0x0000e800 - 0x0000e81f (0x20) IX[b]
    [15] -1    0    0x0000e400 - 0x0000e41f (0x20) IX[b]
    [16] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[b]
    [17] -1    0    0x0000ec00 - 0x0000ecff (0x100) IX[b]
(II) resource ranges after probing:
    [0] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xdffffb00 - 0xdffffbff (0x100) MX[b]
    [5] -1    0    0xdffffc00 - 0xdfffffff (0x400) MX[b]
    [6] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [7] -1    0    0xdfee0000 - 0xdfefffff (0x20000) MX[b](B)
    [8] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [9] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
    [10] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b]
    [11] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [12] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b]
    [13] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [14] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [15] -1    0    0x0000dc00 - 0x0000dcff (0x100) IX[b]
    [16] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [17] -1    0    0x0000e800 - 0x0000e81f (0x20) IX[b]
    [18] -1    0    0x0000e400 - 0x0000e41f (0x20) IX[b]
    [19] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[b]
    [20] -1    0    0x0000ec00 - 0x0000ecff (0x100) IX[b]
    [21] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b]
    [22] 0    0    0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules/libint10.so
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Chipset: "GeForce FX 5200"
(**) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.8
(==) NV(0): Using HW cursor
(--) NV(0): Linear framebuffer at 0xD0000000
(--) NV(0): MMIO registers at 0xDE000000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules/libi2c.so
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules/libddc.so
(II) NV(0): I2C bus "DDC" initialized.
(II) NV(0): Probing for analog device on output A...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for analog device on output B...
(--) NV(0):   ...can't find one
(II) NV(0): Probing for EDID on I2C bus A...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(II) NV(0):   ... none found
(II) NV(0): Probing for EDID on I2C bus B...
(II) NV(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) NV(0): I2C device "DDC:ddc2" removed.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: BNQ  Model: 76d9  Serial#: 8151
(II) NV(0): Year: 2006  Week: 28
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max H-Image Size [cm]: horiz.: 40  vert.: 25
(II) NV(0): Gamma: 2.20
(II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.609
(II) NV(0): blueX: 0.140 blueY: 0.069   whiteX: 0.310 whiteY: 0.330
(II) NV(0): Supported VESA Video Modes:
(II) NV(0): 720x400@70Hz
(II) NV(0): 640x480@60Hz
(II) NV(0): 640x480@67Hz
(II) NV(0): 640x480@72Hz
(II) NV(0): 640x480@75Hz
(II) NV(0): 800x600@60Hz
(II) NV(0): 800x600@72Hz
(II) NV(0): 800x600@75Hz
(II) NV(0): 832x624@75Hz
(II) NV(0): 1024x768@60Hz
(II) NV(0): 1024x768@70Hz
(II) NV(0): 1024x768@75Hz
(II) NV(0): 1280x1024@75Hz
(II) NV(0): 1152x870@75Hz
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported Future Video Modes:
(II) NV(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) NV(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) NV(0): #2: hsize: 1280  vsize 1024  refresh: 72  vid: 35969
(II) NV(0): #3: hsize: 1440  vsize 900  refresh: 75  vid: 3989
(II) NV(0): #4: hsize: 1280  vsize 1024  refresh: 76  vid: 36993
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 106.5 MHz   Image Size:  408 x 255 mm
(II) NV(0): h_active: 1440  h_sync: 1520  h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) NV(0): v_active: 900  v_sync: 904  v_sync_end 907 v_blanking: 934 v_border: 0
(II) NV(0): Supported additional Video Mode:
(II) NV(0): clock: 25.2 MHz   Image Size:  408 x 255 mm
(II) NV(0): h_active: 640  h_sync: 656  h_sync_end 752 h_blank_end 800 h_border: 0
(II) NV(0): v_active: 350  v_sync: 387  v_sync_end 389 v_blanking: 449 v_border: 0
(II) NV(0): Ranges: V min: 56  V max: 76 Hz, H min: 30  H max: 83 kHz, PixClock max 140 MHz
(II) NV(0): Monitor name: BenQ FP92W
(--) NV(0): CRTC 0 is currently programmed for DFP
(II) NV(0): Using DFP on CRTC 0
(--) NV(0): Panel size is 1440 x 900
(II) NV(0): Panel is TMDS
(--) NV(0): VideoRAM: 131072 kBytes
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(WW) NV(0): config file hsync range 28-51kHz not within DDC hsync ranges.
(WW) NV(0): config file vrefresh range 43-60Hz not within DDC vrefresh ranges.
(II) NV(0): Generic Monitor: Using hsync range of 28.00-51.00 kHz
(II) NV(0): Generic Monitor: Using vrefresh range of 43.00-60.00 Hz
(II) NV(0): Clock range:  12.00 to 350.00 MHz
(II) NV(0): Not using default mode "640x350" (vrefresh out of range)
(II) NV(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (vrefresh out of range)
(II) NV(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "720x400" (vrefresh out of range)
(II) NV(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x480" (vrefresh out of range)
(II) NV(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (vrefresh out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "800x600" (hsync out of range)
(II) NV(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (hsync out of range)
(II) NV(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1280x960" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1280x960" (unknown reason)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1280x960" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1280x960" (unknown reason)
(II) NV(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1280x1024" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1280x1024" (unknown reason)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1280x1024" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1280x1024" (unknown reason)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1280x1024" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1280x1024" (unknown reason)
(II) NV(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1600x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1600x1200" (unknown reason)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1600x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1600x1200" (unknown reason)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1600x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1600x1200" (unknown reason)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1600x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1600x1200" (unknown reason)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1600x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1600x1200" (unknown reason)
(II) NV(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1792x1344" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1792x1344" (unknown reason)
(II) NV(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1856x1392" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1856x1392" (unknown reason)
(II) NV(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "832x624" (vrefresh out of range)
(II) NV(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1152x864" (hsync out of range)
(II) NV(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1400x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1400x1050" (unknown reason)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1400x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1400x1050" (unknown reason)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1400x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1400x1050" (unknown reason)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1400x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1400x1050" (unknown reason)
(II) NV(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1440x900" (hsync out of range)
(II) NV(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1600x1024" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1600x1024" (unknown reason)
(II) NV(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1680x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1680x1050" (unknown reason)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1680x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1680x1050" (unknown reason)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1680x1050" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1680x1050" (unknown reason)
(II) NV(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1920x1200" (unknown reason)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1200" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1920x1200" (unknown reason)
(II) NV(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "1920x1440" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "1920x1440" (unknown reason)
(II) NV(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Mode "2048x1536" is larger than BIOS programmed panel size of 1440 x 900.  Removing.
(II) NV(0): Not using default mode "2048x1536" (unknown reason)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NV(0): Not using default mode "1280x800" (width too large for virtual size)
(II) NV(0): Not using default mode "1280x768" (width too large for virtual size)
(II) NV(0): Not using default mode "1152x768" (width too large for virtual size)
(--) NV(0): Virtual size is 1024x768 (pitch 1024)
(**) NV(0): *Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) NV(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) NV(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) NV(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) NV(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) NV(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) NV(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(++) NV(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 0.8
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
    compiled for 7.0.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 0.8
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
    [0] 0    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[b]
    [1] 0    0    0xde000000 - 0xdeffffff (0x1000000) MX[b]
    [2] -1    0    0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1    0    0xdffffb00 - 0xdffffbff (0x100) MX[b]
    [7] -1    0    0xdffffc00 - 0xdfffffff (0x400) MX[b]
    [8] -1    0    0xe0000000 - 0xdfffffff (0x0) MX[b]O
    [9] -1    0    0xdfee0000 - 0xdfefffff (0x20000) MX[b](B)
    [10] -1    0    0xd0000000 - 0xd7ffffff (0x8000000) MX[b](B)
    [11] -1    0    0xde000000 - 0xdeffffff (0x1000000) MX[b](B)
    [12] 0    0    0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [13] 0    0    0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [14] 0    0    0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [15] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [16] -1    0    0x00000000 - 0x000000ff (0x100) IX[b]
    [17] -1    0    0x0000dc00 - 0x0000dcff (0x100) IX[b]
    [18] -1    0    0x0000fc00 - 0x0000fc0f (0x10) IX[b]
    [19] -1    0    0x0000e800 - 0x0000e81f (0x20) IX[b]
    [20] -1    0    0x0000e400 - 0x0000e41f (0x20) IX[b]
    [21] -1    0    0x0000e000 - 0x0000e01f (0x20) IX[b]
    [22] -1    0    0x0000ec00 - 0x0000ecff (0x100) IX[b]
    [23] 0    0    0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [24] 0    0    0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(**) Option "dpms"
(**) NV(0): DPMS enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
error opening security policy file /etc/X11/xserver/SecurityPolicy
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Generic Keyboard: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Generic Keyboard: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ExplorerPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ExplorerPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(**) Option "SendCoreEvents"
(**) stylus: always reports core events
(**) stylus device is /dev/wacom
(**) stylus is in absolute mode
(**) stylus: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) stylus: serial speed 9600
(**) Option "SendCoreEvents"
(**) cursor: always reports core events
(**) cursor device is /dev/wacom
(**) cursor is in relative mode
(**) cursor: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) cursor: serial speed 9600
(**) Option "SendCoreEvents"
(**) eraser: always reports core events
(**) eraser device is /dev/wacom
(**) eraser is in absolute mode
(**) eraser: forcing TabletPC ISD V4 protocol
(**) WACOM: suppress value is 2
(**) Option "BaudRate" "9600"
(**) eraser: serial speed 9600
(II) XINPUT: Adding extended input device "eraser" (type: Wacom Eraser)
(II) XINPUT: Adding extended input device "cursor" (type: Wacom Cursor)
(II) XINPUT: Adding extended input device "stylus" (type: Wacom Stylus)
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(**) Option "Device" "/dev/wacom"
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(EE) xf86OpenSerial: Cannot open device /dev/wacom
    No such file or directory.
Error opening /dev/wacom : No such file or directory
(II) Configured Mouse: ps2EnableDataReporting: succeeded


And my Xorg.conf is 

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder3)  Mon Oct 16 22:13:07 PDT 2006

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen         "Default Screen" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "stylus" "SendCoreEvents"
    InputDevice    "cursor" "SendCoreEvents"
    InputDevice    "eraser" "SendCoreEvents"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath        "/usr/share/X11/fonts/misc"
    FontPath        "/usr/share/X11/fonts/cyrillic"
    FontPath        "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath        "/usr/share/X11/fonts/Type1"
    FontPath        "/usr/share/X11/fonts/100dpi"
    FontPath        "/usr/share/X11/fonts/75dpi"
    FontPath        "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load           "i2c"
    Load           "bitmap"
    Load           "ddc"
    Load           "extmod"
    Load           "freetype"
    Load           "glx"
    Load           "int10"
    Load           "type1"
    Load           "vbe"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "CoreKeyboard"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc104"
    Option         "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
    Option         "Device" "/dev/input/mice"
    Option         "Protocol" "ExplorerPS/2"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons" "true"
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "stylus"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "stylus"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "eraser"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "eraser"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "InputDevice"

                                                      # /dev/input/event
                                                      # for USB
    Identifier     "cursor"
    Driver         "wacom"
    Option         "Device" "/dev/wacom"          # Change to 
    Option         "Type" "cursor"
    Option         "ForceDevice" "ISDV4"               # Tablet PC ONLY
EndSection

Section "Monitor"
    Identifier     "Generic Monitor"
    HorizSync       28.0 - 51.0
    VertRefresh     43.0 - 60.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "NVIDIA Corporation NV34 [GeForce FX 5200]"
    Driver         "nv" # I manually changed this to nv otherwise i cant start X
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "NVIDIA Corporation NV34 [GeForce FX 5200]"
    Monitor        "Generic Monitor"
    DefaultDepth    24
    SubSection     "Display"
        Depth       1
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       4
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       8
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       15
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       16
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection     "Display"
        Depth       24
        Modes      "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Can anyone help me?

**tseliot** · October 29th, 2006

This guide is NOT for Ubuntu Edgy Eft 6.10.

Try this guide of mine instead:
http://ubuntuforums.org/showthread.php?t=281823

as far as your screen resolution is concerned, try point 10 of the Problems Section of that guide

**Cariboo1938** · December 13th, 2006

Originally Posted by Shabba

If you use an nvidia GeForce FX 5200 GPU then there's no need for the above!
Simply open terminal and follow this ...

sudo apt-get install nvidia-glx
sudo apt-get install nvidia-settings
sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
sudo nvidia-glx-config-enable
sudo gedit /usr/share/applications/NVIDIA-Settings.desktop
copy this into the file you just created
.........
.......
....

Hi,
two quick questions: would this work for Ububtu6.10-amd64 too?
would nvidia-glx be tne newest driver?
I tried to install driver 1.0-8776 with the NVIDIA installer and I killed the X server.

Thread: HOWTO: Latest NVIDIA drivers on Ubuntu Breezy

Thread Tools

Display

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Re: HOWTO: Latest NVIDIA drivers

Bookmarks

Bookmarks

Posting Permissions