Results 1 to 2 of 2

Thread: Hauppauge WinTV 34xxx

  1. #1
    Join Date
    Sep 2007
    Beans
    8

    Hauppauge WinTV 34xxx

    Not able to properly set up this capture card on mythbuntu 7.10. dmesg returns the following about the card
    [ 37.352792] CORE cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
    [ 37.352796] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
    [ 37.520955] tveeprom 2-0050: Hauppauge model 34132, rev J158, serial# 2956516
    [ 37.520960] tveeprom 2-0050: tuner model is Philips FM1236 MK3 (idx 58, type 43)
    [ 37.520964] tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
    [ 37.520967] tveeprom 2-0050: audio processor is CX880 (idx 30)
    [ 37.520969] tveeprom 2-0050: has radio
    [ 37.520972] cx88[0]: warning: unknown hauppauge model #34132
    [ 37.520974] cx88[0]: hauppauge eeprom: model=34132
    [ 37.532888] input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input4
    [ 37.532938] cx88[0]/0: found at 0000:02:07.0, rev: 5, irq: 17, latency: 32, mmio: 0xfb000000
    [ 37.611648] tuner 2-0043: chip found @ 0x86 (cx88[0])
    [ 37.611689] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
    [ 37.613398] tuner 2-0061: chip found @ 0xc2 (cx88[0])
    [ 37.613409] tuner 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
    [ 37.613412] tuner 2-0061: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
    [ 37.615725] cx2388x alsa driver version 0.0.6 loaded
    [ 37.625412] cx88[0]/0: registered device video0 [v4l2]
    [ 37.625442] cx88[0]/0: registered device vbi0
    [ 37.625480] cx88[0]/0: registered device radio0

    I get programming error when I try and scan for channels. Any help would be appreciated.

  2. #2
    Join Date
    Sep 2007
    Beans
    8

    Unhappy Re: Hauppauge WinTV 34xxx

    Can antone help?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •