Yes that's the howto i followed to make lm-sensors working.
This is the output I get.
Code:
eeprom-i2c-1-51
Adapter: SMBus Via Pro adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 256
eeprom-i2c-1-50
Adapter: SMBus Via Pro adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
it87-isa-0290
Adapter: ISA adapter
VCore 1: +1.71 V (min = +1.42 V, max = +1.57 V) ALARM
VCore 2: +2.51 V (min = +2.40 V, max = +2.61 V)
+3.3V: +6.66 V (min = +3.14 V, max = +3.46 V) ALARM
+5V: +4.92 V (min = +4.76 V, max = +5.24 V)
+12V: +12.35 V (min = +11.39 V, max = +12.61 V)
-12V: -19.38 V (min = -12.63 V, max = -11.41 V) ALARM
-5V: +0.70 V (min = -5.26 V, max = -4.77 V) ALARM
Stdby: +4.95 V (min = +4.76 V, max = +5.24 V)
VBat: +2.03 V
fan1: 2960 RPM (min = 0 RPM, div = 8)
fan2: 0 RPM (min = 664 RPM, div = 8) ALARM
fan3: 0 RPM (min = 2657 RPM, div = 2)
CPU temp: +34°C (low = +15°C, high = +50°C) sensor = thermistor
M/B Temp: +25°C (low = +15°C, high = +45°C) sensor = thermistor
Temp3: -55°C (low = +15°C, high = +45°C) sensor = thermistor
Bookmarks