Page 7 of 10 FirstFirst ... 56789 ... LastLast
Results 61 to 70 of 99

Thread: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

  1. #61
    Join Date
    Feb 2007
    Location
    Everywhere
    Beans
    1,529
    Distro
    Ubuntu Development Release

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    Quote Originally Posted by 00ber n00b View Post
    got mine working in gutsy, using the first tuto. Also be sure that you do not have your SD card locked,
    I'm running Gutsy and my system freezes. How did you do it?
    "Knowledge is power. Who said that?" - Dave Lister

  2. #62
    Join Date
    Feb 2007
    Location
    Everywhere
    Beans
    1,529
    Distro
    Ubuntu Development Release

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    After examining the bin file, I don't think it xor'ed.
    "Knowledge is power. Who said that?" - Dave Lister

  3. #63
    Join Date
    Feb 2007
    Location
    Everywhere
    Beans
    1,529
    Distro
    Ubuntu Development Release

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    Got it! But nothing happens.
    Code:
    steve@tc1100:~$ dmesg | tail
    [ 1307.752000] pccard: PCMCIA card inserted into slot 1
    [ 1307.768000] pcmcia: registering new device pcmcia1.0
    [ 1307.864000] scsi4 : pata_pci1620
    [ 1307.864000] ata4: PATA max PIO0 cmd 0x00013100 ctl 0x0001310e bmdma 0x00000000 irq 3
    [ 1308.116000] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
    [ 1308.872000] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
    [ 1308.872000] ata4.00: limiting speed to UDMA7:PIO5
    [ 1309.628000] ata4.00: failed to IDENTIFY (INIT_DEV_PARAMS failed, err_mask=0x80)
    "Knowledge is power. Who said that?" - Dave Lister

  4. #64
    Join Date
    May 2007
    Location
    Sunnyvale, CA
    Beans
    45
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    I've try just about everything I've seen in this thread and elsewhere to get my SD card reader working and nothing works.

    I've tried the first tutorial in this thread, the setpci hack, and even followed this page, like others in this thread.

    Code:
    $lspci
    02:04.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
    02:04.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
    02:04.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
    Code:
    $dmesg | tail:
    [  163.240391] pccard: PCMCIA card inserted into slot 1
    [  163.257095] pcmcia: registering new device pcmcia1.0
    [  163.359842] scsi3 : pata_pcmcia
    [  163.360338] ata2: PATA max PIO0 cmd 0x0001a100 ctl 0x0001a10e bmdma 0x00000000 irq 3
    [  163.623913] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    [  164.390834] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    [  164.390851] ata2.00: limiting speed to UDMA7:PIO5
    [  165.165734] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x2)

    I'm new much of a noob to completely understand what's going on here, please help.
    Running Ubuntu 11.04 on a HP Pavilion a1750y PentiumD, Nvidia graphics.

  5. #65
    Join Date
    Feb 2007
    Beans
    8
    Distro
    Ubuntu 7.04 Feisty Fawn

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    It's progress. It's slow frustrating progress, but progress none the less. What size SD card did you use? In XP I'm limited to 1GB cards; I assume that there is something about the addressing in cards >1GB that confuses the firmware.

    00ber n00b, Does your output from lspci have:
    Code:
    02:06.0 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
    02:06.1 CardBus bridge: Texas Instruments PCI1620 PC Card Controller (rev 01)
    02:06.2 System peripheral: Texas Instruments PCI1620 Firmware Loading Function (rev 01)
    in it? If so, please, let us know more about how you got the SD working.

  6. #66
    Join Date
    May 2007
    Location
    Sunnyvale, CA
    Beans
    45
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    Could this problem:

    Code:
    $dmesg
    [  376.913028] pccard: PCMCIA card inserted into slot 1
    [  376.913041] cs: memory probe 0xd0200000-0xd02fffff: excluding 0xd0200000-0xd020ffff
    [  377.443530] pcmcia: registering new device pcmcia1.0
    [  377.607910] scsi2 : pata_pcmcia
    [  377.608286] ata1: PATA max PIO0 cmd 0x0001a100 ctl 0x0001a10e bmdma 0x00000000 irq 3
    [  377.867169] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    [  378.630851] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    [  378.630861] ata1.00: limiting speed to UDMA7:PIO5
    [  379.394540] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x2)
    be solved by editing the config.opts file in usr/lib/pcmciautils?

    Code:
    #
    # Local PCMCIA Configuration File
    #
    #----------------------------------------------------------------------
    #
    # System resources available for PCMCIA cards
    #
    # NOTE: these settings have no effect on resources assigned to a
    # CardBus bridge device itself; this file only affects resources
    # assigned to cards.  Also, interrupt settings here will only affect
    # ISA bus interrupts assigned to 16-bit cards.  PCI interrupts
    # generally can't be reconfigured.
    #
    # With the kernel PCMCIA subsystem, these settings also have no effect
    # at all on resources used for 32-bit CardBus cards.  Those are set by
    # the PCI hotplug subsystem.
    #
    
    include port 0x100-0x3af
    include port 0x3e0-0x4ff
    include port 0x820-0x8ff
    include port 0xc00-0xcf7
    
    include memory 0xc0000-0xfffff
    include memory 0xa0000000-0xa0ffffff
    include memory 0x60000000-0x60ffffff
    
    
    # These may hurt on FSC.
    # include port 0x3c0-0x3d2
    # Exclude 0x3d3 as Radeon IGP MCE's if you touch these ports
    # include port 0x3d4-0x3df
    
    # High port numbers do not always work...
    # include port 0x1000-0x17ff
    
    # Extra port range for IBM Token Ring
    include port 0xa00-0xaff
    I don't know enough about port and memory ranges to figure it out. Anyone know?
    Running Ubuntu 11.04 on a HP Pavilion a1750y PentiumD, Nvidia graphics.

  7. #67
    Join Date
    Nov 2006
    Location
    London, UK
    Beans
    93
    Distro
    Kubuntu 7.04 Feisty Fawn

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    Is there a way to have the reader working with an xD card?

    thank you

    g.

  8. #68
    Join Date
    Sep 2006
    Beans
    3

    Talking Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    If you are using Linux Mint with Gutsy Gibbon you just need to install this software.

    And play

    For me works fine wit the kernel 2.6.22.12

  9. #69
    Join Date
    Aug 2008
    Beans
    6

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    I am trying to use the script on the first page on my TC1100, running Ubuntu 8.04. I get the following when I try to run it:

    Code:
    terralthra@Case:~/Desktop/tifm_install$ ./install.sh
    echo /home/terralthra/Desktop/tifm_install/tifm
    /home/terralthra/Desktop/tifm_install/tifm
    make -C /lib/modules/2.6.24-19-generic/build M=/home/terralthra/Desktop/tifm_install/tifm
    make[1]: Entering directory `/usr/src/linux-headers-2.6.24-19-generic'
      CC [M]  /home/terralthra/Desktop/tifm_install/tifm/tifm_7xx1.o
    /home/terralthra/Desktop/tifm_install/tifm/tifm_7xx1.c: In function ‘tifm_7xx1_probe’:
    /home/terralthra/Desktop/tifm_install/tifm/tifm_7xx1.c:344: error: ‘SA_SHIRQ’ undeclared (first use in this function)
    /home/terralthra/Desktop/tifm_install/tifm/tifm_7xx1.c:344: error: (Each undeclared identifier is reported only once
    /home/terralthra/Desktop/tifm_install/tifm/tifm_7xx1.c:344: error: for each function it appears in.)
    make[2]: *** [/home/terralthra/Desktop/tifm_install/tifm/tifm_7xx1.o] Error 1
    make[1]: *** [_module_/home/terralthra/Desktop/tifm_install/tifm] Error 2
    make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-19-generic'
    make: *** [all] Error 2
    terralthra@Case:~/Desktop/tifm_install$
    Any ideas?

  10. #70
    Join Date
    Mar 2008
    Beans
    19

    Re: HOWTO: TI SD Card Reader *FEISTY SUPPORTED*

    Code:
    '[...] tifm/tifm_7xx1.c:344: error: ‘SA_SHIRQ’ undeclared [...]
    That's because this macro has been deprecated in more recent kernel versions. You're best off trying a slightly newer version, as follows.

    *** NOTE: Compilation only tested with Ubuntu 8.04 & kernel v2.6.24-21 (might also with with 2.6.24-19)

    Get the revision which matches kernel v2.6.24-21 the closest (that's the most up to date Ubuntu 8.04 one):
    Code:
    svn co -r157 http://svn.berlios.de/svnroot/repos/tifmxx/trunk/driver/
    Download the attached patch into the directory you ran the above command in and then do the following:
    Code:
    unzip -d driver ubuntu_2.6.24-21_tifm_ms.patch.zip 
    cd driver
    patch -p1 < ubuntu_2.6.24-21_tifm_ms.patch
    make
    Assuming you get no errors (with v2.6.24-21 you won't) you can the install the module (like described in this thread)... along the lines of:
    Code:
    sudo make install
    Regards,
    VT

    PS: Haven't been able to test this since I don't have a TI card reader
    Attached Files Attached Files

Page 7 of 10 FirstFirst ... 56789 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •