Page 94 of 94 FirstFirst ... 4484929394
Results 931 to 933 of 933

Thread: Desktop Hardware Compatibility List.

  1. #931
    Join Date
    Feb 2019

    Re: Desktop Hardware Compatibility List.

    Samsung Notebook 7 Spin (NP750QUA) Works only with version 18.10.

    Keyboard lighting does not work. Must have kernel 4.18 or newer to work to boot Ubuntu.
    Last edited by whi2468; February 14th, 2019 at 08:07 PM.

  2. #932
    Join Date
    May 2008
    Ubuntu 18.04 Bionic Beaver

    Intel NUC8i3BEH

    Intel NUC8i3BEH
    2 x Crucial 4GB DDR4-2400 SODIMM (8GB total)
    Sandisk Ultra II SSD- 2.5” 120GB
    Logitech Wireless K270 Keyboard and M185 Mouse
    Benq Monitor GL2250HM LED 22” 1920 x 1080

    Using Ubuntu 18.04 with Gnome DE

    All the following function fine:-

    All USB ports
    Wired ethernet
    Graphics and sound via HDMI
    Front panel headphone jack
    Micro SD card reader
    (can also boot alternative OS from the card reader e.g. LibreELEC)
    Charging via yellow USB port when powered off


    M.2 drive

    M.2 drive now tested

    I purchased a 128Gb ADATA SU800 M.2 SSD Drive and I can report that it is recognised by Ubuntu 18.04 as a storage medium and also as a bootable drive.
    Last edited by tea for one; August 30th, 2019 at 06:55 PM. Reason: M.2 Drive now tested

  3. #933
    Join Date
    Oct 2009
    Ubuntu Development Release

    Re: Desktop Hardware Compatibility List.

    Asus Rog Strix B450-F Gaming

    Ubuntu Focal Fossa and Ubuntu 19.10

    p-i@pi-System-Product-Name:~$ inxi -Fz
    System:    Host: pi-System-Product-Name Kernel: 5.3.0-24-generic x86_64 bits: 64 Desktop: Gnome 3.34.1 
               Distro: Ubuntu 20.04 LTS (Focal Fossa) 
    Machine:   Type: Desktop Mobo: ASUSTeK model: ROG STRIX B450-F GAMING v: Rev 1.xx serial: <filter> UEFI: American Megatrends 
               v: 2704 date: 08/23/2019 
    CPU:       Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP L2 cache: 4096 KiB 
               Speed: 1380 MHz min/max: 1550/3750 MHz Core speeds (MHz): 1: 1375 2: 1375 3: 1374 4: 1374 5: 1375 6: 1375 7: 1375 
               8: 1372 9: 1373 10: 1372 11: 1374 12: 1375 13: 1375 14: 1375 15: 1371 16: 1370 
    Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] Navi 10 [Radeon RX 5700 / 5700 XT] driver: amdgpu v: kernel 
               Display: x11 server: X.Org 1.20.5 driver: amdgpu tty: N/A 
               OpenGL: renderer: AMD NAVI10 (DRM 3.33.0 5.3.0-24-generic LLVM 9.0.0) v: 4.5 Mesa 19.2.4 
    Audio:     Device-1: Advanced Micro Devices [AMD/ATI] Navi 10 HDMI Audio driver: snd_hda_intel 
               Device-2: Advanced Micro Devices [AMD] Family 17h HD Audio driver: snd_hda_intel 
               Sound Server: ALSA v: k5.3.0-24-generic 
    Network:   Device-1: Intel I211 Gigabit Network driver: igb 
               IF: enp4s0 state: up speed: 1000 Mbps duplex: full mac: <filter> 
    Drives:    Local Storage: total: 903.59 GiB used: 36.68 GiB (4.1%) 
               ID-1: /dev/nvme0n1 vendor: Kingston model: SA1000M8480G size: 447.13 GiB 
               ID-2: /dev/nvme1n1 vendor: Samsung model: SSD 960 EVO 250GB size: 232.89 GiB 
               ID-3: /dev/sda vendor: Samsung model: SSD 850 EVO 250GB size: 232.89 GiB 
               ID-4: /dev/sdb vendor: SanDisk model: Ultra II 240GB size: 223.57 GiB 
    Partition: ID-1: / size: 227.74 GiB used: 36.67 GiB (16.1%) fs: ext4 dev: /dev/nvme1n1p2 
    Sensors:   System Temperatures: cpu: 42.4 C mobo: 37.0 C gpu: amdgpu temp: 76 C 
               Fan Speeds (RPM): cpu: 553 case-1: 904 case-2: 823 case-3: 500 gpu: amdgpu fan: 0 
    Info:      Processes: 420 Uptime: 17h 34m Memory: 15.57 GiB used: 5.22 GiB (33.5%) Shell: bash inxi: 3.0.37 
    Mounted the HD-audio connector incorrect. After remount had to set the Auto-Mut to Disabled i alsamixer. Now working with Analog Surround 5.1 Output

    Found information on this page
    -Flashed BIOS to 2704. This Bios also support Ryzen 3000 CPU:s
    -sudo apt-get install dkms
    -sudo apt install git
    -git clone
    -cd asus-wmi-sensors/
    -sudo make dkms
    -sudo nano /etc/rc.local with content:
    #!/bin/sh -e
    # rc.local
    # This script is executed at the end of each multiuser runlevel.
    # Make sure that the script will "exit 0" on success or any other
    # value on error.
    # In order to enable or disable this script just change the execution
    # bits.
    # By default this script does nothing.
    modprobe asus-wmi-sensors
    exit 0
    Make /etc/rc.local exekverbar
    -sudo chmod +x /etc/rc.local

    I made these changes in In BIOS, but perhaps only Set IOMMU to Disabled is necessary
    -Set PSS Support to Enable
    -Set USB power delivery in SoftOff to Disable
    -Set Serial Port to OFF
    -In AMD CBS Set Global C-state control to enable
    -In AMD CBS Set Power Supply Idle Control to Low Current Idle
    -In AMD CBS Set IOMMU to Disabled
    Add "iommu=soft" in the line GRUB_CMDLINE_LINUX="" in /etc/default/grub
    Last edited by P-I H; December 29th, 2019 at 10:54 AM.

Page 94 of 94 FirstFirst ... 4484929394


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts