Page 2244 of 2328 FirstFirst ... 124417442144219422342242224322442245224622542294 ... LastLast
Results 22,431 to 22,440 of 23276

Thread: Post your .conkyrc files w/ screenshots

  1. #22431
    Join Date
    Apr 2013
    Location
    North Sweden
    Beans
    99
    Distro
    Ubuntu Gnome 13.10 Saucy Salamander

    Re: Post your .conkyrc files w/ screenshots

    Okey.

    I tried doing that and after I had saved and were going to test, I detected that now Conky aren't running at all. Tried write conky in the ALT+F2 place, also tried write "conky &" , but also didn't work, nothing came up.
    So I restarted computer and now it somehow doesn't work at all.
    Wrote Conky in the terminal and it gave me this http://screencloud.net/v/gZuk

  2. #22432
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    Change back to own_window_type normal .
    No need to keep restating...just log out/in if you must.
    You can also reload a running conky after a config change with...
    Code:
    killall -SIGUSR1 conky
    I'm off to bed. Go back to start of my posts and read link for hdd and cpu temps.
    Downloaded conky configs need to be edited for your computer.
    eg run...
    Code:
    blkid
    and change the config to read the drives you have.
    /dev/sdb may need to be /dev/sda and then you'll need to install hddtemp anyway.
    Last edited by stinkeye; November 11th, 2013 at 08:34 PM.

  3. #22433
    Join Date
    Apr 2013
    Location
    North Sweden
    Beans
    99
    Distro
    Ubuntu Gnome 13.10 Saucy Salamander

    Re: Post your .conkyrc files w/ screenshots

    Ah okey well, thanks for the help!
    I will look into the code and really try understand it etc. If I don't get it working I just let it be.
    May try out other conky scripts in the thread and play around with the knowledge I so far have right now.
    And hddtemp I already have installed, went throught the installation again, doing the sensor commands etc.

  4. #22434
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    To get hdd temperature change line#99 of your conky config.
    At the end of that line you'll see ${exec hddtemp /dev/sdb -n}°C
    Change for your drive.

    Allow conky to read hddtemp as non-root.
    Run in a maximized terminal else it may complain "Dialogue frontend requires a screen at least 13 lines tall and 31 columns wide."
    Code:
    sudo dpkg-reconfigure hddtemp
    When asked "Should /usr/sbin/hddtemp be installed SUID root?"...choose yes.
    Use tab to move and spacebar to select.
    Leave the other choices as default.


    For cpu temp you need lm-sensors installed.
    Code:
    sudo apt-get install lm-sensors
    Then run...
    Code:
    sudo sensors-detect
    You will be prompted for a response to (YES/no):
    As "YES" is capitalized just pressing enter will choose yes.
    Answer yes to all questions.
    A couple of prompts will be of the form (yes/NO). Make sure to type in yes for these ones.

    Now run...
    Code:
    sensors
    ...and you should see something like...
    Code:
    glen@Raring:~$ sensors
    it8720-isa-0228
    Adapter: ISA adapter
    in0:          +0.99 V  (min =  +0.00 V, max =  +4.08 V)
    in1:          +1.92 V  (min =  +0.00 V, max =  +4.08 V)
    in2:          +3.38 V  (min =  +0.00 V, max =  +4.08 V)
    +5V:          +3.01 V  (min =  +0.00 V, max =  +4.08 V)
    in4:          +3.07 V  (min =  +0.00 V, max =  +4.08 V)
    in5:          +1.06 V  (min =  +0.00 V, max =  +4.08 V)
    in6:          +3.38 V  (min =  +0.00 V, max =  +4.08 V)
    5VSB:         +3.02 V  (min =  +0.00 V, max =  +4.08 V)
    Vbat:         +3.26 V  
    fan1:        2636 RPM  (min =    0 RPM)
    fan2:           0 RPM  (min =    0 RPM)
    fan3:        1147 RPM  (min =    0 RPM)
    fan5:           0 RPM  (min =    0 RPM)
    temp1:        +37.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
    temp2:        +38.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode
    temp3:        +80.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
    cpu0_vid:    +1.250 V
    intrusion0:  ALARM
    
    k10temp-pci-00c3
    Adapter: PCI adapter
    temp1:        +32.5°C  (high = +70.0°C)
                           (crit = +72.0°C, hyst = +70.0°C)
    .
    Post your output from sensors as you will need help to grep the right value and use this in conky.
    Last edited by stinkeye; November 12th, 2013 at 11:45 AM.

  5. #22435
    Join Date
    Aug 2013
    Beans
    5

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post

    Does hddtemp work:
    10 Nov 13 | 11:20:11 ~
    Code:
        $ hddtemp /dev/sda
    /dev/sda: WDC WD2500AAJS-00VWA0: 31°C
     
     10 Nov 13 | 11:20:24 ~
        $ hddtemp /dev/sda -n
    31
     
     10 Nov 13 | 11:20:30 ~
        $
    If yes in conky all you need is:
    Code:
    ${hddtemp /dev/sda}°
    After I installed hddtemp then typed in the code you gave I get this:
    Code:
    /dev/sda: ST3120022A: 35*
    and
    35
    (my keyboard doesn't seem to have the degree symbal or I'm getting blind in both eye's)

    What am I going to use as the degree symbal?
    I might actually have one in my phones virtual keyboard? Could transfer .conky.rc to phone and edit after renaming?

    PS: Can't spell today either.

  6. #22436
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    Just copy and paste the degree symbol from an existing code posted on this thread.
    Who's Awesome? You're Awesome.

  7. #22437
    Join Date
    Aug 2013
    Beans
    5

    Re: Post your .conkyrc files w/ screenshots

    Duh! Don't I feel smart today.

    Thanks Petro Dawg.

  8. #22438
    Join Date
    Feb 2010
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Andy_Browning View Post
    Duh! Don't I feel smart today.

    Thanks Petro Dawg.
    Hey, we all have our "DUH!" days ... I have at least one DUH moment per day, make's em interesting!

    Here, I have a few extra: ° ° ° ° ° ° ° °

    Also make sure you use a font that can display the ° symbol.

  9. #22439
    Join Date
    Feb 2008
    Location
    Mine goes to 11
    Beans
    3,753

    Re: Post your .conkyrc files w/ screenshots

    Code:
    $(printf \\260)
    Earache, my eye.

  10. #22440
    Join Date
    Feb 2010
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Habitual View Post
    Code:
    $(printf \\260)
    OK ... obviously I'm a noob looking for a place to burst out....
    Code:
      12 Nov 13 | 18:17:29 ~
        $ $(printf \\260)
    bash: $'\260': command not found
     
     12 Nov 13 | 18:17:52 ~
        $ printf \\260
    � 
     12 Nov 13 | 18:18:12 ~
        $ (printf \\260)
    � 
     12 Nov 13 | 18:18:27 ~
        $
    Educate me please.

Page 2244 of 2328 FirstFirst ... 124417442144219422342242224322442245224622542294 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •