Page 2225 of 2325 FirstFirst ... 122517252125217522152223222422252226222722352275 ... LastLast
Results 22,241 to 22,250 of 23245

Thread: Post your .conkyrc files w/ screenshots

  1. #22241
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    Hi stefano-1

    Here's some other tips to go with Petro Dawg's advice.
    • For a conky to fit in your panel area put all your code below "TEXT" on the same line. Every line below "TEXT" adds to your conky length.
    • Use ${goto xx} to fix the position of each conky output.(Try to keep to the one font size)
    • Use ${voffset xx} and ${voffset -xx} if needed to keep your output in horizontal alignment.
    • When configuring use own_window_transparent no to see what space conky is taking.




    I think you have to use "own_window_type panel" rather than normal or override, to position conky above your panel.
    own_window_type normal won't draw to the same space reserved for the unity-panel.
    own_window_type overrde ignores the "own_window_hints" above setting and defaults to below and disappears behind the unity-panel.

    A handy app is GTK Theme Preferences to customize your unity-panel background and text colours.(overrides theme settings)
    105.jpg

    This is the conky config I use to display in the unity panel.
    Code:
    ####
    ## Use XFT? Required to Force UTF8 (see below).
    #
    use_xft yes
    xftfont GE Inspira:bold:size=10
    xftalpha 0.8
    text_buffer_size 1024
    
    ####
    ## Force UTF8? Requires XFT (see above).
    ## Displays degree symbol, instead of °, etc.
    #
    override_utf8_locale yes
    
    ####
    ## Daemonize Conky, aka 'fork to background'.
    #
    background no
    
    ####
    ## Update interval in seconds.
    #
    update_interval 1.0
    
    ####
    ## This is the number of times Conky will update before quitting.
    ## Set to zero to run forever.
    #
    total_run_times 0
    
    ####
    ## Create own window instead of using desktop (required in nautilus)?
    #
    own_window yes
    own_window_colour dark blue
    own_window_title panelconky
    own_window_type panel
    own_window_transparent yes
    own_window_hints undecorated,sticky,skip_taskbar,skip_pager,above
    default_color dim gray
    own_window_argb_visual yes
    own_window_argb_value 180
    
    ####
    ## Use double buffering? Reduces flicker.
    #
    double_buffer yes
    
    ####
    ## Draw shades?
    #
    draw_shades no
    default_shade_color 000000
    
    ####
    ## Draw outlines?
    #
    draw_outline no
    #default_outline_color 000000
    
    ####
    ## Draw borders around text?
    #
    draw_borders no
    
    ####
    ## Draw borders around graphs?
    #
    draw_graph_borders no
    
    ####
    ## Print text to stdout?
    ## Print text in console?
    #
    out_to_ncurses no
    out_to_console no
    
    ####
    ## Text alignment.
    #
    alignment tm
    
    ####
    ## Minimum size of text area.
    #
    minimum_size 800 
    maximum_width 800
    
    ####
    ## Gap between text and screen borders.
    #
    gap_x 0
    gap_y 1
    
    ####
    ## Shorten MiB/GiB to M/G in stats.
    #
    short_units yes
    
    ####
    ## Pad % symbol spacing after numbers.
    #
    pad_percents 0
    
    ####
    ## Pad spacing between text and borders.
    #
    border_inner_margin 1
    border_outer_margin 1
    border_width 1
    
    ####
    ## Limit the length of names in "Top Processes".
    #
    top_name_width 10
    
    ####
    ## Subtract file system -/+buffers/cache from used memory?
    ## Set to yes, to produce meaningful physical memory stats.
    #
    no_buffers yes
    
    ####
    ## Set to yes, if you want all text to be in UPPERCASE.
    #
    uppercase no
    
    ####
    ## Number of cpu samples to average.
    ## Set to 1 to disable averaging.
    #
    cpu_avg_samples 2
    
    ####
    ## Number of net samples to average.
    ## Set to 1 to disable averaging.
    #
    net_avg_samples 2
    
    ####
    ## Add spaces to keep things from moving around?
    ## Only affects certain objects.
    #
    use_spacer right
    
    ####
    ## My colors (suit yourself).
    #
    color0 White
    color1 Ivory
    color2 Ivory2
    color3 Ivory3
    color4 FF4040
    color5 FBE6B7 #text colour
    color6 Gray
    color7 AntiqueWhite4
    color8 F9A41E
    #color9 red
    color9 6A90EF #icon
    
    lua_load ~/conky/lua/bargraph_smallcpu.lua
    lua_draw_hook_post main_bars
    TEXT
    ${goto 20}${if_existing /home/glen/tmp/countdown}${voffset 3}${goto 80}${color9}${font Guifx v2 Transports:size=14}c${offset 3}${font LCDMono2:bold:size=12}${color yellow}${exec tail -n1 ~/tmp/countdown}${voffset -4}${endif}${goto 200}${voffset 3}${color9}${font StyleBats:size=12}q${font}${color5}${offset 1}${voffset -2}CPU${font GE Inspira:bold:size=10}${goto 305}${execpi 3 sensors it8720-isa-0228 | grep temp1 | awk '{print $2}' | cut -c2-3 | xargs ~/conky/ColorTemp/ColorTempCPU.sh}°C  ${goto 350}${voffset 2}${color9}${font StyleBats:size=12}q${voffset -2}${offset 1}${font}${color5}HDD ${font GE Inspira:bold:size=10}${color orange}${execpi 10 hddtemp -n /dev/sdb | xargs /home/glen/conky/ColorTemp/ColorTempHDD.sh}°C    ${voffset 2}${color9}${font StyleBats:size=12}q${offset 1}${voffset -2}${font}${color5}GPU ${font GE Inspira:bold:size=10}${font GE Inspira:bold:size=10}${execpi 5 sensors nouveau-pci-0100 | grep temp1 | awk '{print $2}' | cut -c2-3 | xargs /home/glen/conky/ColorTemp/ColorTempGPU.sh}°C    ${color9}${voffset 2}${font StyleBats:size=12}q${font}${color5}${offset 1}${voffset -2}MEM ${font GE Inspira:bold:size=10}${color cyan1}${mem}    ${goto 635}${color green}${font PizzaDudeBullets:size=12}T${font GE Inspira:bold:size=10}${downspeedf eth0}${goto 740}${color yellow}${font PizzaDudeBullets:size=12}N${font GE Inspira:bold:size=10}${upspeedf eth0}${color}${font}
    The cpu and net activity is drawn with a lua script.
    bargraph_smallcpu.lua
    Code:
    --[[ BARGRAPH WIDGET
    	v2.1 by wlourf (07 Jan. 2011)
    	this widget draws a bargraph with different effects 
    	http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
    	
    To call the script in a conky, use, before TEXT
    	lua_load /path/to/the/script/bargraph.lua
    	lua_draw_hook_pre main_rings
    and add one line (blank or not) after TEXT
    
    	
    Parameters are :
    3 parameters are mandatory
    name	- the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
    arg		- the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
    		  arg can be a numerical value if name=""
    max		- the maximum value the above variable can reach, for example, for {$cpu cpu0}, just write max=100
    	
    Optional parameters:
    x,y		- coordinates of the starting point of the bar, default = middle of the conky window
    cap		- end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
    		  http://www.cairographics.org/samples/set_line_cap/
    angle	- angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
    		  set to 90 for an horizontal bar
    skew_x	- skew bar around x axis, default = 0
    skew_y	- skew bar around y axis, default = 0
    blocks  - number of blocks to display for a bar (values >0) , default= 10
    height	- height of a block, default=10 pixels
    width	- width of a block, default=20 pixels
    space	- space between 2 blocks, default=2 pixels
    angle_bar	- this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
    radius		- for cicular bars, internal radius, default=0
    			  with radius, parameter width has no more effect.
    
    Colours below are defined into braces {colour in hexadecimal, alpha}
    fg_colour	- colour of a block ON, default= {0x00FF00,1}
    bg_colour	- colour of a block OFF, default = {0x00FF00,0.5}
    alarm		- threshold, values after this threshold will use alarm_colour colour , default=max
    alarm_colour - colour of a block greater than alarm, default=fg_colour
    smooth		- (true or false), create a gradient from fg_colour to bg_colour, default=false 
    mid_colour	- colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
    			  for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
    			  3 colurs to gradient created by fg_colour and alarm_colour, default=no mid_colour
    led_effect	- add LED effects to each block, default=no led_effect
    			  if smooth=true, led_effect is not used
    			  possibles values : "r","a","e" for radial, parallelel, perdendicular to the bar (just try!)
    			  led_effect has to be used with theses colours :
    fg_led		- middle colour of a block ON, default = fg_colour
    bg_led		- middle colour of a block OFF, default = bg_colour
    alarm_led	- middle colour of a block > ALARM,  default = alarm_colour
    
    reflection parameters, not avaimable for circular bars
    reflection_alpha    - add a reflection effect (values from 0 to 1) default = 0 = no reflection
                          other values = starting opacity
    reflection_scale    - scale of the reflection (default = 1 = height of text)
    reflection_length   - length of reflection, define where the opacity will be set to zero
    					  calues from 0 to 1, default =1
    reflection			- position of reflection, relative to a vertical bar, default="b"
    					  possibles values are : "b","t","l","r" for bottom, top, left, right
    draw_me     - if set to false, text is not drawn (default = true or 1)
                  it can be used with a conky string, if the string returns 1, the text is drawn :
                  example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
    
    v1.0 (10 Feb. 2010) original release
    v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value	
    v1.2 (28 Feb. 2010) just renamed the widget to bargraph
    v1.3 (03 Mar. 2010) added parameters radius & angle_bar to draw the bar in a circular way
    v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
    v2.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
    
    --      This program is free software; you can redistribute it and/or modify
    --      it under the terms of the GNU General Public License as published by
    --      the Free Software Foundation version 3 (GPLv3)
    --     
    --      This program is distributed in the hope that it will be useful,
    --      but WITHOUT ANY WARRANTY; without even the implied warranty of
    --      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    --      GNU General Public License for more details.
    --     
    --      You should have received a copy of the GNU General Public License
    --      along with this program; if not, write to the Free Software
    --      Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
    --      MA 02110-1301, USA.		
    
    ]]
    
    require 'cairo'
    
    ----------------START OF PARAMETERS ----------
    function conky_main_bars()
    	local bars_settings={
    		{	--[ Graph for CPU1 ]--
    			name="cpu",
    			arg="cpu0",
    			max=100,
    			alarm=50,
    			alarm_colour={0xFF0000,0.72},
    			bg_colour={0xFFFFFF,0.25},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=243,y=11,
    			blocks=20,
    			space=1,
    			height=2,width=5,
    			angle=90,
    			smooth=true
    			},
    --[[		{	--[ Graph for GPU Temp ]--
    			name="nvidia",
    			arg="temp",
    			max=100,
    			alarm=50,
    			alarm_colour={0xFF0000,0.60},
    			bg_colour={0xFFFFFF,0.20},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=300,y=15,
    			blocks=18,
                            space=2,
    			height=10,width=4,
    			angle=90,
                            smooth=true
    			}, 
    		{	--[ Graph for Memory ]--
    			name="memperc",
    			arg="",
    			max=100,
    			alarm=50,
    			alarm_colour={0xFF0000,0.72},
    			bg_colour={0xFFFFFF,0.25},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=319,y=13,
    			blocks=20,
    			space=1,
    			height=2,width=5,
    			angle=90,
    			smooth=true
    			},
    		{	--[ Graph for Root ]--
                            name="fs_used_perc",
    			arg="/",
    			max=100,
    			alarm=50,
    			alarm_colour={0xFF0000,0.72},
    			bg_colour={0xFFFFFF,0.25},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=15,y=263,
    			blocks=77,
    			space=1,
    			height=2,width=5,
    			angle=90,
    			smooth=true
    			},	
    		{	--[ Graph for Home ]--
    			name="fs_used_perc",
    			arg="/home",
    			max=100,
    			alarm=50,
    			alarm_colour={0xFF0000,0.72},
    			bg_colour={0xFFFFFF,0.25},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=15,y=292,
    			blocks=77,
    			space=1,
    			height=2,width=5,
    			angle=90,
    			smooth=true
    			},   ]]	
    	        {	--[ Graph for Upspeed ]--
                            name="upspeedf",
    			arg="eth0",
    			max=70,
    			alarm=70,
    			alarm_colour={0xFF0000,0.72},
    			bg_colour={0xFFFFFF,0.25},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=720,y=23,
    			blocks=10,
    			space=1,
    			height=1,width=15,
    			angle=0,
    			smooth=true
    			},           
    {	--[ Graph for Downspeed ]--
                            name="downspeedf",
    			arg="eth0",
    			max=500,
    			alarm=500,
    			alarm_colour={0xFF0000,0.72},
    			bg_colour={0xFFFFFF,0.25},
    			fg_colour={0x00FF00,0.55},
    			mid_colour={{0.45,0xFFFF00,0.70}},
    			x=630,y=5,
    			blocks=10,
    			space=1,
    			height=1,width=15,
    			angle=180,
    			smooth=true
    			},
    		 }	
    	
    -----------END OF PARAMETERS--------------
    
    
        
    	if conky_window == nil then return end
    	
    	local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
    	
    	cr = cairo_create(cs)    
    	--prevent segmentation error when reading cpu state
        if tonumber(conky_parse('${updates}'))>3 then
            for i in pairs(bars_settings) do
            	
            	draw_multi_bar_graph(bars_settings[i])
            	
            end
        end
    	cairo_destroy(cr)
    	cairo_surface_destroy(cs)
    	cr=nil
    
    end
    
    
    
    function draw_multi_bar_graph(t)
    	cairo_save(cr)
    	--check values
    	if t.draw_me == true then t.draw_me = nil end
    	if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end	
    	if t.name==nil and t.arg==nil then 
    		print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ") 
    		return
    	end
    	if t.max==nil then
    		print ("No maximum value defined, use 'max'")
    		return
    	end
    	if t.name==nil then t.name="" end
    	if t.arg==nil then t.arg="" end
    
    	--set default values	
    	if t.x == nil		then t.x = conky_window.width/2 end
    	if t.y == nil		then t.y = conky_window.height/2 end
    	if t.blocks == nil	then t.blocks=10 end
    	if t.height == nil	then t.height=10 end
    	if t.angle == nil 	then t.angle=0 end
    	t.angle = t.angle*math.pi/180
    	--line cap style
    	if t.cap==nil		then t.cap = "b" end
    	local cap="b"
    	for i,v in ipairs({"s","r","b"}) do 
    		if v==t.cap then cap=v end
    	end
    	local delta=0
    	if t.cap=="r" or t.cap=="s" then delta = t.height end
    	if cap=="s" then 	cap = CAIRO_LINE_CAP_SQUARE
    	elseif cap=="r" then
    		cap = CAIRO_LINE_CAP_ROUND
    	elseif cap=="b" then
    		cap = CAIRO_LINE_CAP_BUTT
    	end
    	--end line cap style
    	--if t.led_effect == nil	then t.led_effect="r" end
    	if t.width == nil	then t.width=20 end
    	if t.space == nil	then t.space=2 end
    	if t.radius == nil	then t.radius=0 end
    	if t.angle_bar == nil	then t.angle_bar=0 end
    	t.angle_bar = t.angle_bar*math.pi/360 --halt angle
    	
    	--colours
    	if t.bg_colour == nil 	then t.bg_colour = {0x00FF00,0.5} end
    	if #t.bg_colour~=2 		then t.bg_colour = {0x00FF00,0.5} end
    	if t.fg_colour == nil 	then t.fg_colour = {0x00FF00,1} end
    	if #t.fg_colour~=2 		then t.fg_colour = {0x00FF00,1} end
    	if t.alarm_colour == nil 	then t.alarm_colour = t.fg_colour end
    	if #t.alarm_colour~=2 		then t.alarm_colour = t.fg_colour end
    
    	if t.mid_colour ~= nil then	
    		for i=1, #t.mid_colour do    
    		    if #t.mid_colour[i]~=3 then 
    		    	print ("error in mid_color table")
    		    	t.mid_colour[i]={1,0xFFFFFF,1} 
    		    end
    		end
        end
        
    	if t.bg_led ~= nil and #t.bg_led~=2	then t.bg_led = t.bg_colour end
    	if t.fg_led ~= nil and #t.fg_led~=2	then t.fg_led = t.fg_colour end
    	if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
    	
    	if t.led_effect~=nil then
    		if t.bg_led == nil then t.bg_led = t.bg_colour end
    		if t.fg_led == nil 	then t.fg_led = t.fg_colour end
    		if t.alarm_led == nil  then t.alarm_led = t.fg_led end
    	end
    	
    
    	if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
    	if t.smooth == nil then t.smooth = false end
    
    	if t.skew_x == nil then 
    		t.skew_x=0 
    	else
    		t.skew_x = math.pi*t.skew_x/180	
    	end
    	if t.skew_y == nil then 
    		t.skew_y=0
    	else
    		t.skew_y = math.pi*t.skew_y/180	
    	end
    	
    	if t.reflection_alpha==nil then t.reflection_alpha=0 end
    	if t.reflection_length==nil then t.reflection_length=1 end
    	if t.reflection_scale==nil then t.reflection_scale=1 end
    	
    	--end of default values
    	
    
     	local function rgb_to_r_g_b(col_a)
    		return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
    	end
    	
    	
    	--functions used to create patterns
    
    	local function create_smooth_linear_gradient(x0,y0,x1,y1)
    		local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
    		cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
    		cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
    		if t.mid_colour ~=nil then
    			for i=1, #t.mid_colour do
    				cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
    			end
    		end
    		return pat
    	end
    
    	local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
    		local pat =  cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
    		cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
    		cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
    		if t.mid_colour ~=nil then
    			for i=1, #t.mid_colour do
    				cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
    			end
    		end
    		return pat
    	end
    	
    	local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
    		local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
    		cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
    		cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
    		cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
    		return pat
    	end
    
    	local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
    		local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
    		if mode==3 then
    			cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))				
    			cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
    			cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))				
    		else
    			cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
    			cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))				
    		end
    		return pat
    	end
    
    
    
    
    
    
    	local function draw_single_bar()
    		--this fucntion is used for bars with a single block (blocks=1) but 
    		--the drawing is cut in 3 blocks : value/alarm/background
    		--not zvzimzblr for circular bar
    		local function create_pattern(col_alp,col_led,bg)
    			local pat
    			
    			if not t.smooth then
    				if t.led_effect=="e" then
    					pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
    				elseif t.led_effect=="a" then
    					pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
    				elseif  t.led_effect=="r" then
    					pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
    				else
    					pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
    				end
    			else
    				if bg then
    					pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(t.bg_colour))
    				else
    					pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
    				end
    			end
    			return pat
    		end
    		
    		local y1=-t.height*pct/100
    		local y2,y3
    		if pct>(100*t.alarm/t.max) then 
    			y1 = -t.height*t.alarm/100
    			y2 = -t.height*pct/100
    			if t.smooth then y1=y2 end
    		end
    		
    		if t.angle_bar==0 then
    		
    			--block for fg value
    			local pat = create_pattern(t.fg_colour,t.fg_led,false)
    			cairo_set_source(cr,pat)
    			cairo_rectangle(cr,0,0,t.width,y1)
    			cairo_fill(cr)
    			cairo_pattern_destroy(pat)
    		
    			-- block for alarm value			
    			if not t.smooth and y2 ~=nil then 
    				pat = create_pattern(t.alarm_colour,t.alarm_led,false)
    				cairo_set_source(cr,pat)
    				cairo_rectangle(cr,0,y1,t.width,y2-y1)
    				cairo_fill(cr)
    				y3=y2
    				cairo_pattern_destroy(pat)
    			else
    				y2,y3=y1,y1
    			end
    			-- block for bg value
    			cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
    			pat = create_pattern(t.bg_colour,t.bg_led,true)
    			cairo_set_source(cr,pat)
    			cairo_pattern_destroy(pat)
    			cairo_fill(cr)
    		end		
    	end  --end single bar
    	
    
    
    
    
    
    	local function draw_multi_bar()
    		--function used for bars with 2 or more blocks
    		for pt = 1,t.blocks do 
    			--set block y
    			local y1 = -(pt-1)*(t.height+t.space)
    			local light_on=false
    			
    			--set colors
    			local col_alp = t.bg_colour
    			local col_led = t.bg_led
    			if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
    				if pct>=(pcb*(pt-1))  then 
    					light_on = true
    					col_alp = t.fg_colour
    					col_led = t.fg_led
    					if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then 
    						col_alp = t.alarm_colour 
    						col_led = t.alarm_led 
    					end
    				end
    			end
    
    			--set colors
    			--have to try to create gradients outside the loop ?
    			local pat 
    			
    			if not t.smooth then
    				if t.angle_bar==0 then
    					if t.led_effect=="e" then
    						pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
    					elseif t.led_effect=="a" then
    						pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)					
    					elseif  t.led_effect=="r" then
    						pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)	
    					else
    						pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))
    					end
    				else
    					 if t.led_effect=="a"  then
    						 pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
    														 0, 0, t.radius+(t.height+t.space)*(pt),						 
    											 col_alp,col_led,3)	
    					else
    						pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(col_alp))					
    					end
    					
    				end
    			else
    				
    				if light_on then
    					if t.angle_bar==0 then
    						pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
    					else
    						pat = create_smooth_radial_gradient(0, 0, (t.height+t.space),  0,0,(t.blocks+1)*(t.height+t.space),2)
    					end
    				else		
    					pat = cairo_pattern_create_rgba  (rgb_to_r_g_b(t.bg_colour))
    				end
    			end
    			cairo_set_source (cr, pat)
    			cairo_pattern_destroy(pat)
    
    			--draw a block
    			if t.angle_bar==0 then
    				cairo_move_to(cr,0,y1)
    				cairo_line_to(cr,t.width,y1)
    			else		
    				cairo_arc( cr,0,0,
    					t.radius+(t.height+t.space)*(pt)-t.height/2,
    					 -t.angle_bar -math.pi/2 ,
    					 t.angle_bar -math.pi/2)
    			end
    			cairo_stroke(cr)
    		end	
    	end
    	
    	
    	
    	
    	local function setup_bar_graph()
    		--function used to retrieve the value to display and to set the cairo structure
    		if t.blocks ~=1 then t.y=t.y-t.height/2 end
    		
    		local value = 0
    		if t.name ~="" then
    			value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
    			--$to_bytes doesn't work when value has a decimal point,
    			--https://garage.maemo.org/plugins/ggit/browse.php/?p=monky;a=commitdiff;h=174c256c81a027a2ea406f5f37dc036fac0a524b;hp=d75e2db5ed3fc788fb8514121f67316ac3e5f29f
    			--http://sourceforge.net/tracker/index.php?func=detail&aid=3000865&group_id=143975&atid=757310
    			--conky bug?
    			--value = (conky_parse(string.format('${%s %s}', t.name, t.arg)))
    			--if string.match(value,"%w") then
    			--	value = conky_parse(string.format('${to_bytes %s}',value))
    			--end
    		else
    			value = tonumber(t.arg)
    		end
    
    		if value==nil then value =0 end
    		
    		pct = 100*value/t.max
    		pcb = 100/t.blocks
    		
    		cairo_set_line_width (cr, t.height)
    		cairo_set_line_cap  (cr, cap)
    		cairo_translate(cr,t.x,t.y)
    		cairo_rotate(cr,t.angle)
    
    		local matrix0 = cairo_matrix_t:create()
    		tolua.takeownership(matrix0)
    		cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
    		cairo_transform(cr,matrix0)
    
    	
    		
    		--call the drawing function for blocks
    		if t.blocks==1 and t.angle_bar==0 then
    			draw_single_bar()
    			if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
    		else
    			draw_multi_bar()
    		end
    
    		--dot for reminder
    		--[[
    		if t.blocks ~=1 then
    			cairo_set_source_rgba(cr,1,0,0,1)
    			cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
    			cairo_fill(cr)
    		else
    			cairo_set_source_rgba(cr,1,0,0,1)
    			cairo_arc(cr,0,0,3,0,2*math.pi)
    			cairo_fill(cr)
    		end]]
    		
    		--call the drawing function for reflection and prepare the mask used		
    		if t.reflection_alpha>0 and t.angle_bar==0 then
    			local pat2
    			local matrix1 = cairo_matrix_t:create()
    			tolua.takeownership(matrix1)
    			if t.angle_bar==0 then
    				pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
    				if t.reflection=="t" then
    					cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
    					pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
    				elseif t.reflection=="r" then
    					cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
    					pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
    				elseif t.reflection=="l" then
    					cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
    					pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
    				else --bottom
    					cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
    					pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
    				end
    			end
    			cairo_transform(cr,matrix1)
    
    			if t.blocks==1 and t.angle_bar==0 then
    				draw_single_bar()
    				cairo_translate(cr,0,-t.height/2) 
    			else
    				draw_multi_bar()
    			end
    			
    			
    			cairo_set_line_width(cr,0.01)
    			cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
    			cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
    			if t.angle_bar==0 then
    				cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
    			end
    			cairo_clip_preserve(cr)
    			cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
    			cairo_stroke(cr)
    			cairo_mask(cr,pat2)
    			cairo_pattern_destroy(pat2)
    			cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
    			
    		end --reflection
    		pct,pcb=nil
    	end --setup_bar_graph()
    	
    	--start here !
    	setup_bar_graph()
    	cairo_restore(cr)
    end
    Attached Images Attached Images
    Last edited by stinkeye; August 22nd, 2013 at 04:41 AM.

  2. #22242
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    After all my hard work setting up the .desktop file I ended up trashing most of what I did and just rolled everything I typically use into one Conky. So now my launcher just opens and closes 1 Conky with the added option to open the 1 config file.





    @ stinkeye

    Absolutely right about "normal" and "override" not drawing over the panel. And nice panel Conky you have there. (course you had to "cheat" a little and use LUA scripts to get those fancy schmancy bar graphs
    )
    Who's Awesome? You're Awesome.

  3. #22243
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Petro Dawg View Post

    @ stinkeye

    Absolutely right about "normal" and "override" not drawing over the panel. And nice panel Conky you have there. (course you had to "cheat" a little and use LUA scripts to get those fancy schmancy bar graphs
    )
    Just tryin' to be cool and keep up with the kids new fandangled gizmos.
    KEEP OFF MY LAWN!

  4. #22244
    Join Date
    Jul 2008
    Location
    The Left Coast of the USA
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Post your .conkyrc files w/ screenshots

    Just for grins and giggles, I have been working on a sci-ffi movie "starship bridge" sort of idea.

    This is just a small part. Obviously it's not near finished.

    imagemgr21.jpg
    The Left Coast Geek * The Community ATI Driver Wiki * Find what you need in the Ubuntu Community wikis

    Don't let the truth get in the way of a good story!
    This universe is crazy. I'm going back to my own.


  5. #22245
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by QIII View Post
    Just for grins and giggles, I have been working on a sci-ffi movie "starship bridge" sort of idea.

    This is just a small part. Obviously it's not near finished.

    imagemgr21.jpg
    -spockfascinating.jpg

  6. #22246
    Join Date
    Aug 2013
    Beans
    4

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by stinkeye View Post
    Hi stefano-1

    Here's some other tips to go with Petro Dawg's advice.
    • For a conky to fit in your panel area put all your code below "TEXT" on the same line. Every line below "TEXT" adds to your conky length.
    • Use ${goto xx} to fix the position of each conky output.(Try to keep to the one font size)
    • Use ${voffset xx} and ${voffset -xx} if needed to keep your output in horizontal alignment.
    • When configuring use own_window_transparent no to see what space conky is taking.
    Thank you very much stinkeye, this is so useful, thank you everyone for sharing these info, I so much appreciate.
    My conky is looking slicker and slicker and more usable (the goto did help tremendously)

  7. #22247
    Join Date
    Apr 2009
    Location
    Decatur, Il.
    Beans
    129
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Post your .conkyrc files w/ screenshots

    I know this thread is for posting conkys, but not sure where to post to ask for help...

    Anyway, I am trying to use a conky and I have cpu temps that are displayed in Celcius, but I need them in Fahrenheit/Imperial. I have done this before, but I forget how to. I know there are different methods for different sensors and it's using hwmon.

    Code:
    Cpu:  $cpu%  ${hwmon 0 temp 1}°C
    Can someone please tell me how to get there reading in F please?
    We are 138

  8. #22248
    Join Date
    Oct 2008
    Beans
    3,509

    Re: Post your .conkyrc files w/ screenshots

    In your conky config above "TEXT" add the line...
    Code:
    temperature_unit fahrenheit
    Also in your line...
    Code:
    Cpu:  $cpu%  ${hwmon 0 temp 1}°
    ...you may want to use $goto to stop your output sliding when
    $cpu% changes from single to double digits.

    eg something like...
    Code:
    Cpu:  $cpu%  ${goto 80}${hwmon 0 temp 1}

  9. #22249
    Join Date
    Apr 2009
    Location
    Decatur, Il.
    Beans
    129
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Post your .conkyrc files w/ screenshots

    Awesome thanks, worked great... my goto ended up being 110. I knew about goto, but didn't know all its' behaviors so thanks for that. I'd post my conky, but it's not my creation. I'm eventually going to make my own and post here...
    We are 138

  10. #22250
    Join Date
    Apr 2009
    Location
    Decatur, Il.
    Beans
    129
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Post your .conkyrc files w/ screenshots

    OK one more problem and I think I'm done with the questions lol....

    I have dealt with Compiz and vp positions before and had successfully displayed my conky on a specific vp, but I am having trouble with this one. I think I had something similar to this question somewhere on this site before, but I can't find... Anyway, I want a the conky to only display on the first vp and I can't figure it out. In the config I post below you will see my display commands commented out that did not work. I understand how the code works mostly, but I must be doing something wrong. Here's the config:

    Code:
    alignment top_right
    #alignment top_left
    #alignment bottom_left
    #alignment bottom_right
    
    # Create individual, own window instead of using desktop (desktop), (especially for nautilus)
    own_window yes
    
    # Prevail (other preferences "below")
    own_window_type override
    
    # Transparent Background
    own_window_transparent yes
    
    #  (undecorated, below, sticky, skip_taskbar, skip_pager).
    own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
    
    # Use double "buffering" (reduce flicker)
    # buffering: memory used for temporary storage of the production or import data.
    double_buffer yes
    
    # Use (yes) Anti-Aliasing for what fonts (YES Greek fonts). Try simply "no."
    use_xft yes
    
    # Renewal information update in "conky", in seconds (this is every 3 seconds).
    update_interval 1.0
    
    # Minimum size.
    minimum_size 150 800
    
    # Maximum width of the window.
    maximum_width 200
    
    # Shades
    draw_shades no
    
    # Text
    # Complement the text, and if so.
    draw_outline no
    
    # Border in the destination "conky 'window.
    draw_borders no
    
    # # Font size.
    #font arial:size=10
    
    # # Set to yes (yes), if you want all text to be in uppercase.
    uppercase no
    
    # Print, (the creation of a model simulation
    # varying degrees of solidity or shading by using small dots) Borders
    # (thickness, distance to small grammoules around.)
    stippled_borders 1
    
    # Border margins.
    border_margin 9
    
    # Width of the border.
    border_width 10
    
    # Standard color information.
    #default_color grey
    
    # Color of the window (depends on the image that we have in our desktop (Wallpaper)
    #own_window_colour black
    
    # Distance (pixel, dots) in Horizontal X Vertical PC, from the corner of the screen.
    gap_x 10
    gap_y 5
    lua_load ~/.conky/lua/clock.lua
    lua_draw_hook_pre clock_rings
    temperature_unit fahrenheit
    TEXT
    #${if_match ${execi 60 wmctrl -d | awk '{print $6}' | sed 's/,0//'} == #1366}
    
    
    
    
    ${voffset 30}${font  Swiss 921 BT:size=8}${color ffffff}
                       ${time  %d}-${time  %m} -${color #ac2121}${time  %Y}
    ${voffset 77}${font  Swiss 921 BT:size=10}${color ffffff} 
                Cpu 1:  ${cpu cpu1}%  ${goto 110}${hwmon 0 temp 1}°F
              ${color 0f0f0f}${cpugraph 10,100 0f0f0f 941d1d}${color ffffff} 
                Cpu 2:  ${cpu cpu2}%  ${goto 120}${hwmon 0 temp 1}°F
              ${color 0f0f0f}${cpugraph 10,100 0f0f0f 941d1d}${color ffffff} 
    ${voffset -7}            Mem :      $mem
    #           Swap:       $swap
    ${voffset 55}   
    #          Home:     ${fs_used /home}
    #          Free  :     ${fs_free /home}
               Root  :     ${fs_used /}
               Free  :     ${fs_free /}
    ${voffset 79}
    ${goto 47}${top name 1}
               Cpu:      ${top cpu 1}%
    ${goto 47}${top name 2}
               Cpu:      ${top cpu 2}%
    #           ${top name 2}${goto 110}${top cpu 2}%
    #           ${top name 3}${goto 110}${top cpu 3}%
    #           ${top name 4}${goto 110}${top cpu 4}%
    #          Mem:       ${top_mem mem 1}%
    #          ${top_mem name 1}
    ${voffset 55}
               Signal:      ${wireless_link_qual wlan0}% 
               Up:       ${upspeed wlan0}/s 
               Down:  ${downspeed wlan0}/s 
              ${color 0f0f0f}${downspeedgraph wlan0 10,100  0f0f0f 941d1d}
    
     
    ${image ~/.conky/cc/cc1.png  144x144 -p 0,30}
    ${image ~/.conky/cc/cc2.png  144x144 -p 0,175}
    ${image ~/.conky/cc/cc3.png  144x144 -p 0,320}
    ${image ~/.conky/cc/cc4.png  144x144 -p 0,465}
    ${image ~/.conky/cc/cc5.png  144x144 -p 0,610}
    #${endif}
    #${if_match ${execi 60 wmctrl -d | awk '{print $6}' | sed 's/,0//'} == #2732}HI!${endif}
    I tried setting alignment to top_left, but it didn't work.
    We are 138

Page 2225 of 2325 FirstFirst ... 122517252125217522152223222422252226222722352275 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •