Page 2176 of 2328 FirstFirst ... 1176167620762126216621742175217621772178218622262276 ... LastLast
Results 21,751 to 21,760 of 23277

Thread: Post your .conkyrc files w/ screenshots

  1. #21751
    Join Date
    Feb 2010
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by bartos View Post
    Took Windows 8 Conky and Adjusted it to my liking. I like this style cause i can move the blocks anywhere with out being stuck just moving a whole conky strip.
    Windows 8 now has Desktop Info: Conky for Windows - we are not alone!

    Metro Style Conky by ~kant-o (your link) is a really neat idea I'll have to play with that. But I'll use a tinted semi-transparent background with "draw-bg.lua" rather than solid colours. Personally I prefer conkys that are transparent or "semi-transparent"

    Left [Alt] + [left click] on a conky and any conky can be moved, or maybe that depends on the config above TEXT - not sure, but mine work. So it makes sense if you want to move things to build conky in blocks or "sections". I always run multiple conkys.

    On Start up:


    After "moving" them:


    I sometimes forget about that ability ... thanks for jogging my faulty memory.

    Different layouts depending on your wallpaper or mood.

  2. #21752
    Join Date
    Aug 2010
    Location
    Arizona USA
    Beans
    2,991
    Distro
    Ubuntu Development Release

    Re: Post your .conkyrc files w/ screenshots

    Nice wall... <snagged> LoL!






    * Gnome-Shell 3.8.0.1 / Ubuntu 13.04 beta 2 (final) / Opera-Next
    Intel ® P4 Extreme Edition 3.4 (Gallatin) || DFI ® LanParty PRO875B rev B1
    Crucial ® Ballistix Tracer PC4000 1GB || Mountain Mods U2-UFO Opti-1203
    XFX 7600GT 560M AGP (PV-T73A-UDF3) || Corsair HX520W Modular PSU

  3. #21753
    Join Date
    Feb 2010
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    count the bricks!

  4. #21754
    Join Date
    Aug 2012
    Location
    Florida
    Beans
    185
    Distro
    Xubuntu 12.04 Precise Pangolin

    Re: Post your .conkyrc files w/ screenshots

    Code:
    andrew@SONY-VAIO-PCV-V200G:~$ sudo sensors-detect
    [sudo] password for andrew: 
    # sensors-detect revision 5984 (2011-07-10 21:22:53 +0200)
    # System: Sony Corporation PCV-V200G
    # Board: ASUSTeK Computer INC. PIZZA
    
    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.
    
    Some south bridges, CPUs or memory controllers contain embedded sensors.
    Do you want to scan for them? This is totally safe. (YES/no): yes
    Module cpuid loaded successfully.
    Silicon Integrated Systems SIS5595...                       No
    VIA VT82C686 Integrated Sensors...                          No
    VIA VT8231 Integrated Sensors...                            No
    AMD K8 thermal sensors...                                   No
    AMD Family 10h thermal sensors...                           No
    AMD Family 11h thermal sensors...                           No
    AMD Family 12h and 14h thermal sensors...                   No
    AMD Family 15h thermal sensors...                           No
    AMD Family 15h power sensors...                             No
    Intel digital thermal sensor...                             No
    Intel AMB FB-DIMM thermal sensor...                         No
    VIA C7 thermal sensor...                                    No
    VIA Nano thermal sensor...                                  No
    
    Some Super I/O chips contain embedded sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): yes
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor/ITE'...               No
    Trying family `SMSC'...                                     Yes
    Found unknown chip with ID 0x7201
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor/ITE'...               No
    Trying family `SMSC'...                                     No
    Trying family `VIA/Winbond/Nuvoton/Fintek'...               No
    Trying family `ITE'...                                      No
    
    Some systems (mainly servers) implement IPMI, a set of common interfaces
    through which system health data may be retrieved, amongst other things.
    We first try to get the information from SMBIOS. If we don't find it
    there, we have to read from arbitrary I/O ports to probe for such
    interfaces. This is normally safe. Do you want to scan for IPMI
    interfaces? (YES/no): yes
    Probing for `IPMI BMC KCS' at 0xca0...                      No
    Probing for `IPMI BMC SMIC' at 0xca8...                     No
    
    Some hardware monitoring chips are accessible through the ISA I/O ports.
    We have to write to arbitrary I/O ports to probe them. This is usually
    safe though. Yes, you do have ISA I/O ports even if you do not have any
    ISA slots! Do you want to scan the ISA I/O ports? (YES/no): yes
    Probing for `National Semiconductor LM78' at 0x290...       No
    Probing for `National Semiconductor LM79' at 0x290...       No
    Probing for `Winbond W83781D' at 0x290...                   No
    Probing for `Winbond W83782D' at 0x290...                   No
    
    Lastly, we can probe the I2C/SMBus adapters for connected hardware
    monitoring devices. This is the most risky part, and while it works
    reasonably well on most systems, it has been reported to cause trouble
    on some systems.
    Do you want to probe the I2C/SMBus adapters now? (YES/no): yes
    Using driver `i2c-sis96x' for device 0000:00:02.1: Silicon Integrated Systems SMBus Controller
    Module i2c-dev loaded successfully.
    
    Next adapter: SiS96x SMBus adapter at 0xe600 (i2c-0)
    Do you want to scan it? (YES/no/selectively): yes
    Client found at address 0x2e
    Probing for `Myson MTP008'...                               No
    Probing for `National Semiconductor LM78'...                No
    Probing for `National Semiconductor LM79'...                No
    Probing for `National Semiconductor LM80'...                No
    Probing for `National Semiconductor LM85'...                No
    Probing for `National Semiconductor LM96000 or PC8374L'...  No
    Probing for `Analog Devices ADM1027'...                     No
    Probing for `Analog Devices ADT7460 or ADT7463'...          No
    Probing for `SMSC EMC6D100 or EMC6D101'...                  No
    Probing for `SMSC EMC6D102'...                              No
    Probing for `SMSC EMC6D103'...                              No
    Probing for `SMSC EMC6D103S or EMC2300'...                  No
    Probing for `SMSC EMC6W201'...                              No
    Probing for `Winbond WPCD377I'...                           No
    Probing for `Analog Devices ADT7467 or ADT7468'...          No
    Probing for `Analog Devices ADT7470'...                     No
    Probing for `Analog Devices ADT7473'...                     No
    Probing for `Analog Devices ADT7475'...                     No
    Probing for `Analog Devices ADT7476'...                     No
    Probing for `Analog Devices ADT7490'...                     No
    Probing for `Andigilog aSC7611'...                          No
    Probing for `Andigilog aSC7621'...                          No
    Probing for `National Semiconductor LM87'...                No
    Probing for `Analog Devices ADM1024'...                     No
    Probing for `National Semiconductor LM93'...                No
    Probing for `National Semiconductor LM94'...                No
    Probing for `Winbond W83781D'...                            No
    Probing for `Winbond W83782D'...                            No
    Probing for `Winbond W83791D'...                            No
    Probing for `Winbond W83792D'...                            No
    Probing for `Winbond W83793R/G'...                          No
    Probing for `Nuvoton W83795G/ADG'...                        No
    Probing for `Winbond W83627HF'...                           No
    Probing for `Winbond W83627EHF'...                          No
    Probing for `Winbond W83627DHG/W83667HG/W83677HG'...        No
    Probing for `Asus AS99127F (rev.1)'...                      No
    Probing for `Asus AS99127F (rev.2)'...                      No
    Probing for `Asus ASB100 Bach'...                           No
    Probing for `Winbond W83L786NR/NG/R/G'...                   No
    Probing for `Winbond W83L785TS-S'...                        No
    Probing for `Analog Devices ADM9240'...                     No
    Probing for `Dallas Semiconductor DS1780'...                No
    Probing for `National Semiconductor LM81'...                No
    Probing for `Analog Devices ADM1026'...                     No
    Probing for `Analog Devices ADM1025'...                     No
    Probing for `Maxim MAX6639'...                              No
    Probing for `Texas Instruments AMC6821'...                  No
    Probing for `Analog Devices ADM1029'...                     No
    Probing for `Analog Devices ADM1030'...                     No
    Probing for `Analog Devices ADM1031'...                     No
    Probing for `Analog Devices ADM1022'...                     No
    Probing for `Texas Instruments THMC50'...                   No
    Probing for `Analog Devices ADM1028'...                     No
    Probing for `Texas Instruments THMC51'...                   No
    Probing for `ITE IT8712F'...                                No
    Probing for `SMSC DME1737'...                               No
    Probing for `SMSC SCH5027D-NW'...                           No
    Probing for `SMSC EMC2103'...                               No
    Probing for `Fintek F75373S/SG'...                          No
    Probing for `Fintek F75375S/SP'...                          No
    Probing for `Fintek F75387SG/RG'...                         No
    Probing for `Winbond W83791SD'...                           No
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 Yes
        (confidence 8, not a hardware monitoring chip)
    Probing for `EDID EEPROM'...                                No
    Client found at address 0x51
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 Yes
        (confidence 8, not a hardware monitoring chip)
    
    Next adapter: ivtv i2c driver #0 (i2c-1)
    Do you want to scan it? (yes/NO/selectively): yes
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'...                     No
    Probing for `Analog Devices ADM1034'...                     No
    Probing for `SPD EEPROM'...                                 No
    Probing for `EDID EEPROM'...                                No
    
    Sorry, no sensors were detected.
    Either your system has no sensors, or they are not supported, or
    they are connected to an I2C or SMBus adapter that is not
    supported. If you find out what chips are on your board, check
    http://www.lm-sensors.org/wiki/Devices for driver status.
    andrew@SONY-VAIO-PCV-V200G:~$ sensors
    No sensors found!
    Make sure you loaded all the kernel drivers you need.
    Try sensors-detect to find out which these are.
    andrew@SONY-VAIO-PCV-V200G:~$
    "Found unknown chip with ID 0x7201"

    Disk Utility is showing 30C/86F. Considering I just fired it up 15 minutes ago thats about right.
    Last post It had been on for several hours and showed 115F or 118F?

    Edit: Now showing 43C/109F.

    Machine is a 2003 year model.

    Guess I'll have to google.
    Last edited by AndyOpie150; April 14th, 2013 at 10:59 AM.

  5. #21755
    Join Date
    Apr 2013
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    Any one has expirence with the include path command in conky?
    Documentation from conky site:
    Loads the configfile at path, places the configsettings behind the configsettings in the orginal config and places the vars where the includevar stood.
    file that calls the include:
    Code:
    windows settinge ect....
    #------------------------- Colors
    include ~/.conkyconfig/configs/common/color
    
    TEXT
    ${font}${color0}TEST
    color file:
    Code:
    default_color DCDCDC
    color0 77B753
    color1 DDDDDD
    color2 AAAAAA
    color3 888888
    
    TEXT
    I would expect the color to be colored in color0 from the color file but it is just the default color (white) instead.
    What am i doing wrong? (file path is correct)(also tried without the TEXT in the color file but it has no effect)

    edit, forgot error message: Conky: /home/nooby4ever/.conkyconfig/configs/conky_clock: 33: no such configuration: 'include'
    Last edited by N4E; April 16th, 2013 at 10:34 AM.

  6. #21756
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    Got bored today and did something I've been wanting to do for a looooong time.

    Finally got my Pithos music player info pulled into my Conky. Thanks to an old post here (in which arclance and dk75 gave some awesome advice) and a bit of my "magic" touch, I was able fix and adapt some code into my standard "disappear when not in use" style conky.

    When Pithos in on:
    pithos on.png

    When Pithos is off:
    pithos off.png

    Conky Code:
    Code:
    # TEXT code block 6: START
    ############################################################################################
    #                                                                                          #
    #  Sixth TEXT code block displays Music info from Pithos:                                  #
    #   -> Requires installation of pithos and php5-cli to run a php script                    #
    #        http://kevinmehall.net/p/pithos/                                                  #
    #        sudo apt-get install php5-cli                                                     #
    #                                                                                          #
    ############################################################################################
    ${color}${if_empty ${exec pgrep pithos}}${else}
    ${color1}${font Heydings Icons:size=10}m${font}${color} Pithos
    ${font Alfios:size=9}${color1}Title:${color} ${execp php ~/Documents/Conky/Main/pithos.php 'title'}
    ${color1}Artist:${color} ${execp php ~/Documents/Conky/Main/pithos.php 'artist'}
    ${color1}Album:${color} ${execp php ~/Documents/Conky/Main/pithos.php 'album'}
    ${endif}
    # TEXT code block 6: END
    pithos.php
    Code:
    #!/usr/bin/php
    <?php
    
    $song=`dbus-send --print-reply --dest=net.kevinmehall.Pithos /net/kevinmehall/Pithos net.kevinmehall.Pithos.GetCurrentSong`;
    
    $matches = array();
    
    switch($argv[1]) {
        case 'album':
            $pattern = '~"album".*?"(.*?)".*~s';
            break;
        case 'title':
            $pattern = '~"title".*?"(.*?)".*~s';
            break;
        case 'artist':
            $pattern = '~"artist".*?"(.*?)".*~s';
            break;
        default:
            exit;
    }
    
    preg_match($pattern, $song, $matches);
    
    if($matches) {
        echo $matches[1];
    }
    ?>
    Last edited by Petro Dawg; April 17th, 2013 at 03:47 AM.
    Who's Awesome? You're Awesome.

  7. #21757
    Join Date
    Feb 2010
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Petro Dawg View Post
    Got bored today and did something I've been wanting to do for a looooong time.
    You swam home after the rain vs driving!


    No that's not it ....

    OK lets get serious here ... neat stuff arclance and dk75 are two smart cookies ...

    but ... this "TEXT code block" stuff ... wazzat?

    Any pointers on your standard "disappear when not in use" style greatly appreciated

  8. #21758
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by N4E View Post
    Any one has expirence with the include path command in conky?
    Documentation from conky site:


    file that calls the include:
    Code:
    windows settinge ect....
    #------------------------- Colors
    include ~/.conkyconfig/configs/common/color
    
    TEXT
    ${font}${color0}TEST
    color file:
    Code:
    default_color DCDCDC
    color0 77B753
    color1 DDDDDD
    color2 AAAAAA
    color3 888888
    
    TEXT
    I would expect the color to be colored in color0 from the color file but it is just the default color (white) instead.
    What am i doing wrong? (file path is correct)(also tried without the TEXT in the color file but it has no effect)

    edit, forgot error message: Conky: /home/nooby4ever/.conkyconfig/configs/conky_clock: 33: no such configuration: 'include'
    As far as I understand it....

    Everything above text should be a configuration setting (see available commands here).
    You are trying to put an object above TEXT, it will not work. All objects should be below TEXT.
    Last edited by Petro Dawg; April 17th, 2013 at 04:31 AM.
    Who's Awesome? You're Awesome.

  9. #21759
    Join Date
    Jul 2012
    Location
    Oklahoma, USA
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Sector11 View Post
    but ... this "TEXT code block" stuff ... wazzat?
    Welcome to my obsessive compulsive disorder world of overly super extreme code comments ... Seriously, my comments take up much more space than the code it's self.

    Code block 6 refers to the 6th group of outputs in my conky (pithos information). 1st is Distro information, 2nd is CPU info, and so on. For example if you were not interested in having network information displayed, you could just delete the code block #5 pertaining to that information (which is clearly marked with a Start and an End) without worrying about messing up some other portion of the output.

    Any pointers on your standard "disappear when not in use" style greatly appreciated
    In this particular case I came up with
    Code:
    ${if_empty ${exec pgrep pithos}}${else}...
    to check for Pithos' process ID number. If it exists (not empty, pithos playing) the remaining "Pithos text block" will then run. If there is no process ID number (pithos not running) then nothing gets displayed.

    I have disappearing USB drive information when not plugged in, all that info is in older posts in this thread. And it requires alteration depending on your system setup.

    I also set "available system updates" to disappear when there are none, using...
    Code:
    ${if_match ${execi 3600 /usr/lib/update-notifier/apt-check --human-readable | awk '/can/ {print $1}'}>0}...
    I have no idea if that works on other systems without alteration.

    I doubt you'd like these codes "as is", because they do shrink and grow the Conky in length.
    Last edited by Petro Dawg; April 17th, 2013 at 04:56 AM.
    Who's Awesome? You're Awesome.

  10. #21760
    Join Date
    Apr 2013
    Beans
    0

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Petro Dawg View Post
    As far as I understand it....

    Everything above text should be a configuration setting (see available commands here).
    You are trying to put an object above TEXT, it will not work. All objects should be below TEXT.
    Ah i see, that makes sense.
    I've 8-9 conky windows but all the conky configuration files use the same variables, windows settings ect.. so i was hoping to load files (just insert plain text would be ok) into the configuration file of conky "before conky reads it" so i don't have to manually change all the files when i make a color change for example.

    I don't see any useful command that can be used to do what i described above. Any ideas?

Page 2176 of 2328 FirstFirst ... 1176167620762126216621742175217621772178218622262276 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •