Page 1772 of 2325 FirstFirst ... 7721272167217221762177017711772177317741782182218722272 ... LastLast
Results 17,711 to 17,720 of 23245

Thread: Post your .conkyrc files w/ screenshots

  1. #17711
    Join Date
    Aug 2010
    Location
    Arizona USA
    Beans
    2,983
    Distro
    Ubuntu Development Release

    Re: Post your .conkyrc files w/ screenshots

    Heh! Speaking of commands...

    Here's a cute one, for you:

    Code:
    killall -SIGUSR1 conky
    Kills & reloads your .conkyrc in a single step.

    That's cheating too...


    EDIT

    BTW, I changed exec to pre_exec, in the script (uses less resources).
    Last edited by VinDSL; May 21st, 2011 at 11:03 PM.
    Intel ® P4 Extreme Edition 3.4 (Gallatin) || DFI ® LanParty PRO875B rev B1
    Crucial ® Ballistix Tracer PC4000 1GB || Mountain Mods U2-UFO Opti-1203
    XFX 7600GT 560M AGP (PV-T73A-UDF3) || Corsair HX520W Modular PSU

  2. #17712
    Join Date
    Oct 2009
    Location
    Under a rock
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    [QUOTE=42dorian;10844053]Yeah, I got bored and did some cleanup on my scripts. Including reducing the number.

    @mrpeachy I found there were errors with the way you were doing the positive and negative arcs in a single script (Specifically every time it started it "Forgot" that some of the rings went counter-clockwise, and therefore needed to be "Told" by saving the script again before they would draw the right direction.) Fixed now. So... I kinda compiled everything I know (that you've taught me really) into reformatting the script entirely. It's a bit of a hack job right now, but it's all working. In case you wanted to see it.


    Code:
    require 'cairo'
    function draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    
    local angle_0=rstart*(2*math.pi/360)-math.pi/2
    local angle_f=rend*(2*math.pi/360)-math.pi/2
    local t_arc=(co/100)*(angle_f-angle_0)
    -- Draw background ring
    cairo_arc(cr,across,down,rad,angle_0,angle_f)
    cairo_set_source_rgba(cr,bgr,bgg,bgb,bga)
    cairo_set_line_width(cr,inlw)
    cairo_stroke(cr)
    -- Draw indicator ring
    cairo_arc(cr,across,down,rad,angle_0,angle_0+t_arc)
    cairo_set_source_rgba(cr,inr,ing,inb,ina)
    cairo_stroke(cr)
    end
    
    function conky_draw_pos()
    if conky_window == nil then return end
    if cs == nil or cairo_xlib_surface_get_width(cs) ~= conky_window.width or cairo_xlib_surface_get_height(cs) ~= conky_window.height then
            if cs then cairo_surface_destroy(cs) end
            cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
        end
        if cr then cairo_destroy(cr) end
    cr = cairo_create(cs)
    local updates=tonumber(conky_parse('${updates}'))
    if updates>=5 then
    --NETRING SETUP-------------------------------------------------------------------------------------
    wtimer=(updates % 30)+1
    months = {"Jan","Feb","Mar","Apr","May","Jun","Jul","Aug","Sep","Oct","Nov","Dec"}
    monthnum=tonumber(os.date('%m'))
    monthname=os.date('%b')
    day=tonumber(os.date('%d'))
    if day<12 then
        if monthnum==1 then
        monthbeforenum=12
        else
        monthbeforenum=monthnum-1
        end
    month=months[monthbeforenum]
    else    
    month=monthname
    end
    if updates==6 or wtimer==1 then    
    co=(conky_parse("${exec vnstat -m | grep -n '" .. month .. "' | sed -n 1p | awk -F'|' '{print $3}'}"))
    co=string.gsub(co," ","")
    num=tonumber((string.gsub(co,"%a","")))
    units=(string.gsub(co,"[%p%d]",""))
    end
    if num==nil then num=0 end
    print (num,units)
    --max number--------------------------
    if units=="GB" or units=="GiB" then max=25 end
    if units =="MB" or units=="MiB"  then max=25600 end
    if units =="KB" or units=="KiB"  then max=26214400 end
    if max==nil then max=0 end
    --position-----------------------------
    across=275
    down=985
    --radius of ring-----------------------
    rad=30
    --ring width---------------------------
    inlw=15
    --start and end angles---------------
    rstart=-135
    rend=135
    --color and alpha for indicator----
    inr,ing,inb,ina=255,0,0,1
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=255,255,0,1
    --calculation, do not edit below---------
    co=(num/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina)
    --END NETRING SETUP---------------------------------------------------------------------------------
    --SETUP:CPU2 Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    co=tonumber(conky_parse('${cpu cpu2}'))
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=290
    down=455
    --radius of ring-----------------------
    rad=40
    --ring width---------------------------
    inlw=10
    --start and end angles---------------
    rstart=180
    rend=360
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=1,1,0,1
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:RAM Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    co=tonumber(conky_parse('${memperc}'))
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=290
    down=455
    --radius of ring-----------------------
    rad=25
    --ring width---------------------------
    inlw=10
    --start and end angles---------------
    rstart=-180
    rend=180
    --color and alpha for indicator----
    inr,ing,inb,ina=1,1,1,1.0
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=0.5,0.5,0.5,1.0
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:SWAP Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    co=tonumber(conky_parse('${swapperc}'))
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=290
    down=455
    --radius of ring-----------------------
    rad=8
    --ring width---------------------------
    inlw=16
    --start and end angles---------------
    rstart=-180
    rend=180
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1.0
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=1,1,1,0.75
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:7GBACKUP3 Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    mounted=conky_parse('${if_mounted /media/7GBACKUP3}1${else}0${endif}')
    if tonumber(mounted)==1 then
    co=tonumber(conky_parse('${fs_used_perc /media/7GBACKUP3}'))
    else
    co=0
    end
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=240
    down=695
    --radius of ring-----------------------
    rad=45
    --ring width---------------------------
    inlw=5
    --start and end angles---------------
    rstart=180
    rend=270
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1.0
    --background ring color and alpha-----
    mounted=conky_parse('${if_mounted /media/7GBACKUP3}1${else}0${endif}')
    if tonumber(mounted)==1 then
    bgr,bgg,bgb,bga=0.75,0.75,0,1.0
    else
    bgr,bgg,bgb,bga=1,1,1,1.0
    end
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:120 Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    mounted=conky_parse('${if_mounted /media/120}1${else}0${endif}')
    if tonumber(mounted)==1 then
    co=tonumber(conky_parse('${fs_used_perc /media/120}'))
    else
    co=0
    end
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=240
    down=695
    --radius of ring-----------------------
    rad=45
    --ring width---------------------------
    inlw=5
    --start and end angles---------------
    rstart=270
    rend=360
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1.0
    --background ring color and alpha-----
    mounted=conky_parse('${if_mounted /media/120}1${else}0${endif}')
    if tonumber(mounted)==1 then
    bgr,bgg,bgb,bga=0.75,0.75,0,1.0
    else
    bgr,bgg,bgb,bga=1,1,1,1.0
    end
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:Sansa Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    wtimer=(updates % 30)+1
    if updates==6 or wtimer==1 then
    mounted=conky_parse("${if_match ${exec df -h | grep -c 'SANSA CLIPP'} == 1}1${else}0${endif}")
    end
    if tonumber(mounted)==1 then
    co=tonumber(conky_parse("${exec df -h | grep 'SANSA CLIPP' | awk '{print $5}' | sed 's/%//'}"))
    else
    co=0
    end
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=328
    down=670
    --radius of ring-----------------------
    rad=5
    --ring width---------------------------
    inlw=5
    --start and end angles---------------
    rstart=-180
    rend=180
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0.75,0,1.0
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=0,0,0,0.0
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:OS USB Stick Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    mounted=conky_parse('${if_mounted /media/OSUSB}1${else}0${endif}')
    if tonumber(mounted)==1 then
    co=tonumber(conky_parse('${fs_used_perc /media/OSUSB}'))
    else
    co=0
    end
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=325
    down=730
    --radius of ring-----------------------
    rad=5
    --ring width---------------------------
    inlw=5
    --start and end angles---------------
    rstart=-180
    rend=180
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1.0
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=0,0,0,0.0
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_pos(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    end
    end
    
    --NEGATIVE ARCS-------------------------------------------------------------------------------------------
    
    require 'cairo'
    function draw_ring_neg(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    
    local angle_0=rstart*(2*math.pi/360)-math.pi/2
    local angle_f=rend*(2*math.pi/360)-math.pi/2
    local t_arc=(co/100)*(angle_f-angle_0)
    -- Draw background ring
    cairo_arc(cr,across,down,rad,angle_0,angle_f)
    cairo_set_source_rgba(cr,bgr,bgg,bgb,bga)
    cairo_set_line_width(cr,inlw)
    cairo_stroke(cr)
    -- Draw indicator ring
    local angle_0_r=rend*(2*math.pi/360)-math.pi/2
    local angle_f_r=rstart*(2*math.pi/360)-math.pi/2
    local t_arc=(co/100)*(angle_f_r-angle_0_r)
    cairo_arc_negative(cr,across,down,rad,angle_0_r,angle_0_r+t_arc)
    cairo_set_source_rgba(cr,inr,ing,inb,ina)
    cairo_stroke(cr)
    end
    
    function conky_draw_neg()
    if conky_window == nil then return end
    if cs == nil or cairo_xlib_surface_get_width(cs) ~= conky_window.width or cairo_xlib_surface_get_height(cs) ~= conky_window.height then
            if cs then cairo_surface_destroy(cs) end
            cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
        end
        if cr then cairo_destroy(cr) end
    cr = cairo_create(cs)
    local updates=tonumber(conky_parse('${updates}'))
    if updates>=5 then
    --SETUP:CPU Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    co=tonumber(conky_parse('${cpu cpu1}'))
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=290
    down=455
    --radius of ring-----------------------
    rad=40
    --ring width---------------------------
    inlw=10
    --start and end angles---------------
    rstart=0
    rend=180
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1
    --background ring color and alpha-----
    bgr,bgg,bgb,bga=1,1,0,1
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_neg(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:7GBACKUP Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    mounted=conky_parse('${if_mounted /media/7GBACKUP}1${else}0${endif}')
    if tonumber(mounted)==1 then
    co=tonumber(conky_parse('${fs_used_perc /media/7GBACKUP}'))
    else
    co=0
    end
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=240
    down=695
    --radius of ring-----------------------
    rad=45
    --ring width---------------------------
    inlw=5
    --start and end angles---------------
    rstart=0
    rend=90
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1.0
    --background ring color and alpha-----
    mounted=conky_parse('${if_mounted /media/7GBACKUP}1${else}0${endif}')
    if tonumber(mounted)==1 then
    bgr,bgg,bgb,bga=0.75,0.75,0,1.0
    else
    bgr,bgg,bgb,bga=1,1,1,1.0
    end
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_neg(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    --SETUP:7GBACKUP2 Ring-----------------------------------------------------------------------------
    --conky object to be displayed-----
    mounted=conky_parse('${if_mounted /media/7GBACKUP2}1${else}0${endif}')
    if tonumber(mounted)==1 then
    co=tonumber(conky_parse('${fs_used_perc /media/7GBACKUP2}'))
    else
    co=0
    end
    if co==nil then co=0 end
    --max number--------------------------
    max=100
    --position-----------------------------
    across=240
    down=695
    --radius of ring-----------------------
    rad=45
    --ring width---------------------------
    inlw=5
    --start and end angles---------------
    rstart=90
    rend=180
    --color and alpha for indicator----
    inr,ing,inb,ina=1,0,0,1.0
    --background ring color and alpha-----
    mounted=conky_parse('${if_mounted /media/7GBACKUP2}1${else}0${endif}')
    if tonumber(mounted)==1 then
    bgr,bgg,bgb,bga=0.75,0.75,0,1.0
    else
    bgr,bgg,bgb,bga=1,1,1,1.0
    end
    --calculation, do not edit below---------
    co=(co/max)*100
    draw_ring_neg(co, across, down, rad, inlw, rstart, rend, bgr, bgg, bgb, bga, inr, ing, inb, ina, direction)
    --END SETUP---------------copy setup section and paste for additional rings----------
    end
    end
    if its working then its working but this doesn't seem a very efficient way of doing it
    seeing as you have 2 separate function, one that draws positive and one that draws negative, you really dont need two main function called seperately in the conky rc

    just copy all the setups and drawing function calls from function conky_draw_neg() into
    function conky_draw_pos()

    like so
    Code:
    function negative(x,y,z)
    end
    
    function positive(x,y,z)
    end
    
    function main
    setup positive ring
    x=x
    y=y
    z=z
    call positive ring function
    positive (x,y,z)
    
    setup negative ring
    x=x
    y=y
    z=z
    negative (x,y,z)
    
    end main function
    you can also remove direction as a setting sent to the function as it no longer serves any purpose
    i think its always a good idea to keep track of your variables and keep them in check

    ive started putting lines like this at the end of the main functions
    Code:
    end-- if updates>5
    cairo_destroy(cr)
    cairo_surface_destroy(cs)
    cr=nil
    end-- end main function
    a good idea borrowed from wlorfs scripts

    and sometimes it is easier to draw rings without the need for functions at all, when you just need one or two

    Code:
    cairo_set_source_rgba (cr,0.5,0.5,0.5,1)
    cairo_set_line_width (cr,14)
    cairo_arc (cr,sx,sy,117,((math.pi)/180)*(92.5),((math.pi)/180)*(175))
    cairo_stroke (cr)
    root=conky_parse("${fs_used_perc /}")
    cairo_set_source_rgba (cr,102/255,122/255,119/255,1)
    cairo_arc_negative (cr,sx,sy,117,((math.pi)/180)*(175),((math.pi)/180)*(175-((82.5)*(root/100))))
    cairo_stroke (cr)
    for example
    sx and sy are defined elsewhere in the script

    understanding what the numbers mean in the various cairo commands is extremely important
    Last edited by mrpeachy; May 21st, 2011 at 11:23 PM.

  3. #17713
    Join Date
    Jul 2009
    Beans
    54

    Re: Post your .conkyrc files w/ screenshots

    I just reinstalled my system, so some specs changed, and obviously I also went for a new, fresh look. This brought a need for a semi-transparent conky background.

    I used the conky+compiz method to get it semi transparnt, but the effect is BAD: everything in conky is semitransparent now, including text, pictures and graphs, and I want only the background transparent.

    Any tips?

  4. #17714
    Join Date
    Apr 2007
    Beans
    195

    Re: Post your .conkyrc files w/ screenshots

    Oh... sorry mrpeachy... I don't mean YOU were doing it wrong, I mean that I was getting errors when it ran the old way. It wasn't drawing the negative rings in the negative when I first started it, so I had to save the script before it would draw them properly. And now it draws them perfectly every time.

    I'm quite aware of the massive inefficiency of the code as it is. But, it works for me, and I actually understand enough of it that I can fix it if it breaks (to a degree.) and I still don't quite get what you just told me. I am, by far, not your best student. Thank You though! Ultimately I only brought it to your attention in case you got offended that I wedged the netring in the way I did.

    I kinda get the surface destroy at the end of the function part though. I think I might add that eventually.

  5. #17715
    Join Date
    Oct 2009
    Location
    Under a rock
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by 42dorian View Post
    Oh... sorry mrpeachy... I don't mean YOU were doing it wrong, I mean that I was getting errors when it ran the old way. It wasn't drawing the negative rings in the negative when I first started it, so I had to save the script before it would draw them properly. And now it draws them perfectly every time.

    I'm quite aware of the massive inefficiency of the code as it is. But, it works for me, and I actually understand enough of it that I can fix it if it breaks (to a degree.) and I still don't quite get what you just told me. I am, by far, not your best student. Thank You though! Ultimately I only brought it to your attention in case you got offended that I wedged the netring in the way I did.

    I kinda get the surface destroy at the end of the function part though. I think I might add that eventually.
    if i post some code on a forum then people can do whatever they want with it and i wont get offended

    unfortunately i don't have the original script to test, as i would like to find out what was going on for future reference

    you arent the first person who has tried a script i wrote that didnt work, and upon later inspection turned out it was a mistake in the script by me causing the problem

  6. #17716
    Join Date
    Sep 2008
    Location
    Italy Varese..
    Beans
    8
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Post your .conkyrc files w/ screenshots

    sun.lua
    Code:
    --sun position lua script by mrpeachy 2010
    
    --input latitude
    --for northern hemisphere enter positive
    --for southern hemisphere enter negative
    latitude=45.8333 --VARESE ITALY--
    
    --input hemisphere
    --for northern enter 1
    --for southern enter 2
    hemisphere=1
    
    --edit the below line to input location of bash script
    --in this case i have called the script "sundata.sh"
    location=('${exec /home/deegan/sun.sh}')
    
    require 'cairo'
    
    function addzero10(num)
    if tonumber(num) < 10 then
    return "0" .. num
    else
    return num
    end
    end
    
    function round(val, decimal)
      if (decimal) then
        return math.floor( (val * 10^decimal) + 0.5) / (10^decimal)
      else
        return math.floor(val+0.5)
      end
    end
    
    function string:split(delimiter)
    local result = { }
    local from  = 1
    local delim_from, delim_to = string.find( self, delimiter, from  )
    while delim_from do
    table.insert( result, string.sub( self, from , delim_from-1 ) )
    from  = delim_to + 1
    delim_from, delim_to = string.find( self, delimiter, from  )
    end
    table.insert( result, string.sub( self, from  ) )
    return result
    end
    
    function conky_draw_newconky()
    if conky_window == nil then return end
    local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
    cr = cairo_create(cs)
    local updates=tonumber(conky_parse('${updates}'))
    
    if updates ==5 then
    test=(conky_parse(location))
    end
    if updates > 5 then
    if updates == 10 then
    test=(conky_parse('${exec /home/deegan/sun.sh}'))
    end
    timer=(updates % 600)+1
    if timer==1 then
    test=(conky_parse('${exec /home/deegan/sun.sh}'))
    end
    test2=string.split(test, ":")
    
    sunrisehours=test2[1]
    sunrisemins=test2[2]
    sunsethours=(test2[6])+12
    sunsetmins=test2[7]
    --time at sunrise and sunset in minutes
    sun1=(test2[1]*60)+test2[2]
    sun2=((test2[6]+12)*60)+test2[7]
    sunlength=sun2-sun1
    
    if tonumber(test2[3])<12 and test2[5]=="PM" then
    sunhighhrs=(test2[3])+12
    else
    sunhighhrs=test2[3]
    end
    
    --time at solar noon in mins
    sun3=(sunhighhrs*60)+(test2[4])
    --calculate current time
    hrs=os.date("%H")
    min=os.date("%M")
    
    current=(hrs*60)+min
    total=(24*60)
    --calculate offset to make solar noon at top
    sundiff=(12*60)-sun3
    --civil twilight for sunrise
    ctr=(test2[8]*60)+test2[9]
    --civil twilight for sunset
    cts=((test2[10]+12)*60)+test2[11]
    --sunrise altitude
    ralt=test2[12]
    --solar noon altitude
    snalt=test2[13]
    --sunset altitude
    salt=test2[14]
    --sunrize azimuth
    rz=test2[15]
    --solar noon azimuth
    na=test2[16]
    --sunset azimuth
    sz=test2[17]
    --sun declination (average of rise, noon and set)
    sdec=(test2[18]+test2[19]+test2[20])/3
    
    --sin(Alt) = cos(Lat) cos(Decl) cos(HAngle) + sin(Lat) sin(Dec)
    --calculate altitude at solar noon
    current=sun3
    sha=(current-sun3)*(15/60)
    cossha=math.cos(math.rad(sha))
    cossundec=math.cos(math.rad(sdec))
    coslat=math.cos(math.rad(latitude))
    cosmath=cossha*cossundec*coslat
    sinsundec=math.sin(math.rad(sdec))
    sinlat=math.sin(math.rad(latitude))
    sinmath=sinsundec*sinlat
    sinelevation=cosmath+sinmath
    elevation=math.deg(math.asin(sinelevation))
    snalt=elevation
    
    --calculate altitude at solar midnight
    current=sun3+(12*60)
    sha=(current-sun3)*(15/60)
    cossha=math.cos(math.rad(sha))
    cossundec=math.cos(math.rad(sdec))
    coslat=math.cos(math.rad(latitude))
    cosmath=cossha*cossundec*coslat
    sinsundec=math.sin(math.rad(sdec))
    sinlat=math.sin(math.rad(latitude))
    sinmath=sinsundec*sinlat
    sinelevation=cosmath+sinmath
    elevation=math.deg(math.asin(sinelevation))
    smalt=elevation*-1
    --calculate sha when altitude=0
    --sin(Alt) = cos(Lat) cos(Decl) cos(HAngle) + sin(Lat) sin(Dec)
    
    sinalt0=math.sin(math.rad(0))
    alt0math1=sinalt0-(sinlat*sinsundec)
    alt0math2=alt0math1/coslat
    alt0cossha=alt0math2/cossundec
    shaalt0=math.deg(math.acos(alt0cossha))
    alt0time1=shaalt0/(15/60)
    alt0time=(alt0time1+sun3)
    
    --calculate current solar altitude
    current=(hrs*60)+min
    sha=(current-sun3)*(15/60)
    cossha=math.cos(math.rad(sha))
    cossundec=math.cos(math.rad(sdec))
    coslat=math.cos(math.rad(latitude))
    cosmath=cossha*cossundec*coslat
    sinsundec=math.sin(math.rad(sdec))
    sinlat=math.sin(math.rad(latitude))
    sinmath=sinsundec*sinlat
    sinelevation=cosmath+sinmath
    elevation=math.deg(math.asin(sinelevation))
    curaltlong=elevation
    curalt=round(curaltlong,2)
    
    --calculate current azimuth
    azmath1=(cossha*cossundec*sinlat)-(sinsundec*coslat)
    azmath2=math.cos(math.rad(elevation))
    cosaz=azmath1/azmath2
    azi1=math.deg(math.acos(cosaz))
    azi2=round(azi1, 2)
    
    if sha>0 then
    azi=azi2+180
    else
    azi=(azi2-180)*-1
    end
    if current==sundiff*-1 then azi=180 else end
    
    --setup position
    horizontal=100
    vertical=150
    radius=(snalt+(smalt))/2
    raddiff=(snalt-smalt)/2
    
    across=horizontal
    down=vertical
    
    --plot arc points arc
    shatable={}
    alttable={}
    azitable={}
    
    for i = 0, 24*60 do
    sha=(i-sun3)*(15/60)
    shatable[i]=sha
    end
    
    for i = 0, 24*60 do
    sha=shatable[i]
    cossha=math.cos(math.rad(sha))
    cossundec=math.cos(math.rad(sdec))
    coslat=math.cos(math.rad(latitude))
    cosmath=cossha*cossundec*coslat
    sinsundec=math.sin(math.rad(sdec))
    sinlat=math.sin(math.rad(latitude))
    sinmath=sinsundec*sinlat
    sinelevation=cosmath+sinmath
    elevationplot=math.deg(math.asin(sinelevation))
    curaltlong=elevationplot
    altplot=round(curaltlong,2)
    alttable[i]=altplot
    end
    
    for i = 0, 24*60 do
    azmath1=(math.cos(math.rad(shatable[i]))*cossundec*sinlat)-(sinsundec*coslat)
    azmath2=math.cos(math.rad(alttable[i]))
    cosaz=azmath1/azmath2
    azi1=math.deg(math.acos(cosaz))
    aziplot=round(azi1, 2)
    if i>0 and i<sundiff*-1 then
    azitable[i]=aziplot*-1
    else if i<(sun3) then
    azitable[i]=aziplot
    else
    azitable[i]=aziplot*-1
    end
    end
    end
    
    --sin(Alt) = cos(Lat) cos(Decl) cos(HAngle) + sin(Lat) sin(Dec)
    --calculate hour angle of sun at altitude 0
    hamath1=math.sin(math.rad(0))-(sinlat*sinsundec)
    hamath2=hamath1/(coslat*cossundec)
    --calculate azimuth at the hour angle at 0 altitude
    azmath1=(hamath2*cossundec*sinlat)-(sinsundec*coslat)
    azmath2=math.cos(math.rad(0))
    cosaz=azmath1/azmath2
    azi1=math.deg(math.acos(cosaz))
    azi0alt=(round(azi1, 2))+start
    
    outer1=radius
    text_arc=((2*math.pi/(360))*(azi0alt))+((2*math.pi/(360))*(180))
    tyshp=0+outer1*(math.cos(text_arc))
    
    --horizontal position
    horipos={}
    for i=0,24*60 do
    outer1=radius
    text_arc=(2*math.pi/(360))*(azitable[i])+((2*math.pi/(360))*(180))
    txshp=0-outer1*(math.sin(text_arc))
    horipos[i]=txshp
    end
    
    for i=0,24*60 do
    circrad=0.5
    circx=across-horipos[i]
    circy=down-alttable[i]+tyshp
    cairo_arc(cr,circx,circy,circrad,0,2*math.pi)
    cairo_close_path(cr)
    cairo_set_source_rgba(cr,0.4,0.4,0.4,1)
    cairo_fill (cr)
    end
    --end of plot
    
    current=(hrs*60)+min
    sha=(current-sun3)*(15/60)
    
    --draw south-north
    
    cairo_move_to (cr, across, down+smalt+tyshp)
    cairo_line_to (cr, across, down-snalt+tyshp)
    cairo_set_source_rgba(cr,0.5,0.5,0.5,1)
    cairo_set_line_width (cr, 1)
    cairo_stroke (cr)
    
    --draws horizon stationary
    
    cairo_move_to (cr, horizontal-100, down+tyshp)
    cairo_rel_line_to (cr, 200, 0)
    cairo_set_source_rgba(cr,0.5,0.5,0.5,1)
    cairo_set_line_width (cr, 1)
    cairo_stroke (cr) 
    
    --draws current sun position
    
    outer1=radius
    text_arc=((2*math.pi/(360))*(azi))+((2*math.pi/(360))*(start))
    txs=0-outer1*(math.sin(text_arc))
    circrad=1.6
    circx=across+txs
    circy=down-curalt+tyshp
    cairo_arc(cr,circx,circy,circrad,0,2*math.pi)
    cairo_close_path(cr)
    cairo_set_source_rgba(cr,1,1,1,1)
    cairo_fill (cr)
    
    --draws text label
    
    cairo_select_font_face (cr, "Mono", CAIRO_FONT_SLANT_NORMAL, CAIRO_FONT_WEIGHT_NORMAL);
    cairo_set_font_size (cr, 10);
    cairo_set_source_rgba (cr, 1, 1, 1, 1);
    --current values above
    cairo_move_to (cr, across-100, down-radius-40)
    cairo_show_text (cr, "Time " .. addzero10(hrs) .. ":" .. min)
    cairo_move_to (cr, across-100, down-radius-30)
    cairo_show_text (cr, "Azimuth " .. azi .. "°")
    cairo_move_to (cr, across-100, down-radius-20)
    cairo_show_text (cr, "Altitude " .. curalt .. "°")
    
    --table
    cairo_move_to (cr, across-100, down+radius+40)
    cairo_show_text (cr, "Time ")
    cairo_move_to (cr, across-100, down+radius+50)
    cairo_show_text (cr, "Altitude ")
    cairo_move_to (cr, across-100, down+radius+60)
    cairo_show_text (cr, "Azimuth ")
    --titles
    sr=-45
    sn=5
    ss=70
    cairo_move_to (cr, across+sr, down+radius+30)
    cairo_show_text (cr, "Sunrise")
    cairo_move_to (cr, across+sn, down+radius+30)
    cairo_show_text (cr, "Solar Noon")
    cairo_move_to (cr, across+ss, down+radius+30)
    cairo_show_text (cr, "Sunset")
    sr=-38
    sn=15
    ss=72.5
    cairo_move_to (cr, across+sr, down+radius+40)
    cairo_show_text (cr, addzero10(test2[1]) .. ":" .. test2[2])
    cairo_move_to (cr, across+sr, down+radius+50)
    cairo_show_text (cr, test2[12] .. "°")
    cairo_move_to (cr, across+sr, down+radius+60)
    cairo_show_text (cr, test2[15] .. "°")
    
    if test2[5]=="PM" and tonumber(test2[3])<12 then
    sntime=(test2[3])+12
    else
    sntime=addzero10(test2[3])
    end
    
    cairo_move_to (cr, across+sn, down+radius+40)
    cairo_show_text (cr, sntime .. ":" .. test2[4])
    cairo_move_to (cr, across+sn, down+radius+50)
    cairo_show_text (cr, test2[13] .. "°")
    cairo_move_to (cr, across+sn, down+radius+60)
    cairo_show_text (cr, test2[16] .. "°")
    
    cairo_move_to (cr, across+ss, down+radius+40)
    cairo_show_text (cr, (test2[6]+12) .. ":" .. test2[7])
    cairo_move_to (cr, across+ss, down+radius+50)
    cairo_show_text (cr, test2[14] .. "°")
    cairo_move_to (cr, across+ss, down+radius+60)
    cairo_show_text (cr, test2[17] .. "°")
    
    cairo_move_to (cr, across-100, down+radius+80)
    cairo_show_text (cr, "Length of Day " .. test2[21])
    cairo_move_to (cr, across-100, down+radius+90)
    cairo_show_text (cr, "Tomorrow will be " .. test2[22])
    
    snz=round(test2[16],0)
    
    if snz==180 then
    cairo_move_to (cr, across-3, down+tyshp-snalt-5)
    cairo_show_text (cr, "S")
    cairo_move_to (cr, across-3, down+tyshp+smalt+12)
    cairo_show_text (cr, "N")
    else if snz==360 then
    cairo_move_to (cr, across-3, down+tyshp-snalt-5)
    cairo_show_text (cr, "N")
    cairo_move_to (cr, across-3, down+tyshp+smalt+12)
    cairo_show_text (cr, "S")
    end
    end
    
    if curalt>-5 and curalt<5 and sha<0 then
    cairo_move_to (cr, across-100, down-radius-10)
    cairo_show_text (cr, "Sunrise")
    else if curalt<5 and curalt>-5 and sha>0 then
    cairo_move_to (cr, across-100, down-radius-10)
    cairo_show_text (cr, "Sunset")
    else if sha>-2 and sha<2 then
    cairo_move_to (cr, across-100, down-radius-10)
    cairo_show_text (cr, "Solar Noon")
    end
    end
    end
    
    end
    end
    sun.sh
    Code:
    #!/bin/bash
    #!/bin/bash
    
    #Setup nstructions.
    #you will need to go to www.wunderground.com and locate your town/city
    #then scroll down untill you see the astronomy section
    #click on the button marked "extended view" 
    #copy the resulting web address into the line beginning with "curl" below
    #in place of the existing address (which is for St Louis, MO)
    ## curl "http://www.wunderground.com/US/MO/Saint_Louis.html?MR=0&extendedsun=sunon"
    {
    curl "http://www.wunderground.com/cgi-bin/findweather/getForecast?query=Varese,%20Italy"
    
    }>/tmp/sundata.html
    
    {
    cat /tmp/sundata.html | nawk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=0 a=3 s="<td>Actual Time</td>"
    cat /tmp/sundata.html | nawk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=0 a=3 s="<td>Civil Twilight</td>"
    cat /tmp/sundata.html | nawk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=0 a=3 s="<td>Altitude</td>"
    cat /tmp/sundata.html | nawk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=0 a=3 s="<td>Azimuth</td>"
    cat /tmp/sundata.html | nawk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=0 a=3 s="<td>Sun Declination</td>"
    cat /tmp/sundata.html | nawk 'c-->0;$0~s{if(b)for(c=b+1;c>1;c--)print r[(NR-c+1)%b];print;c=a}b{r[NR%b]=$0}' b=0 a=2 s="<td>Length of Day</td>"
    cat /tmp/sundata.html |  grep -n 'Tomorrow will be' | sed -n 1p | awk -F'</span>.</div>' '{print $1}' 
    }>/tmp/sundata.txt
    
    
    {
    #real time sunrise - hours and minutes
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 2p | awk -F'AM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $1}' | sed 's| ||g'
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 2p | awk -F'AM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $2}' | sed 's| ||g'
    #real time solar noon - hours, minutes, am or pm
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 3p | awk -F'<td>' '{print $2}' | awk -F' ' '{print $1}' | awk -F':' '{print $1}' | sed 's|[ AMPM]||g'
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 3p | awk -F'<td>' '{print $2}' | awk -F' ' '{print $1}' | awk -F':' '{print $2}' | sed 's|[ AMPM]||g'
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 3p | awk -F'<td>' '{print $2}' | awk -F' ' '{print $2}' | sed 's|[0-9 ]||g'
    #real time sunset - hours and minutes
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 4p | awk -F'PM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $1}' | sed 's| ||g'
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 4p | awk -F'PM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $2}' | sed 's| ||g'
    #civil twilight- sunrise - hours and minutes
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 6p | awk -F'AM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $1}' | sed 's| ||g'
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 6p | awk -F'AM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $2}' | sed 's| ||g'
    #civil twilight- sunset - hours and minutes
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 8p | awk -F'PM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $1}' | sed 's| ||g'
    cat /tmp/sundata.txt |  grep -n '<td>' | sed -n 8p | awk -F'PM' '{print $1}' | awk -F'<td>' '{print $2}' | awk -F':' '{print $2}' | sed 's| ||g'
    #altitude at sunrise
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 1p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #altitude at solar noon
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 2p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #altitude at sunset
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 3p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #azimuth at sunrise
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 4p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #azimuth at solar noon
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 5p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #azimuth at sunset
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 6p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #declination at sunrise
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 7p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #declination at solar noon
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 8p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #declination at sunset
    cat /tmp/sundata.txt |  grep -n '&deg;</td>' | sed -n 9p | awk -F'&deg;</td>' '{print $1}' | awk -F'<td>' '{print $2}' | sed 's| ||g'
    #length of day
    cat /tmp/sundata.txt |  grep -n '</div>' | sed -n 1p | awk -F'</div>' '{print $1}' | awk -F'<div>' '{print $2}'
    #tomorrow will be
    cat /tmp/sundata.txt |  grep -n '<span class="b">' | sed -n 1p | awk -F'<span class="b">' '{print $2}'
    }>/tmp/sundata2.txt
    
    {
    sed 's/$/:/' /tmp/sundata2.txt | tr -d '\n'
    }>/tmp/sundata3.txt
    
    cat /tmp/sundata3.txt
    .conkyrc
    Code:
    #<<== LUA ==>>#
    lua_load ~/sun.lua
    lua_draw_hook_pre draw_newconky
    
    TEXT
    ERROR
    Code:
    Lucid ~~»» conky -c .conkyrc3
    Conky: desktop window (12000ba) is subwindow of root window (b8)
    Conky: window type - override
    Conky: drawing to created window (0x3000001)
    Conky: drawing to double buffer
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
    100  192k    0  192k    0     0  94430      0 --:--:--  0:00:02 --:--:--  108k
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
      % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                     Dload  Upload   Total   Spent    Left  Speed
    100  192k    0  192k    0     0  93578      0 --:--:--  0:00:02 --:--:--  107k
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    Conky: llua_do_call: function conky_draw_newconky execution failed: /home/deegan/sun.lua:69: attempt to perform arithmetic on field '?' (a string value)
    ^CConky: received SIGINT or SIGTERM to terminate. bye!
    Lucid ~~»»
    /home/deegan/sun.lua:69
    sunsethours=(test2[6])+12
    ----

    How could I resolve?
    Thanks

  7. #17717
    Join Date
    Apr 2011
    Beans
    484

    Re: Post your .conkyrc files w/ screenshots

    Anyone have an idea of how I could set up conky to show my current user-agent?
    Life is an extraordinarily long concatenation of luck and coincidence.

  8. #17718
    Join Date
    Oct 2009
    Location
    Under a rock
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by degan View Post
    sun.lua
    Code:
    --sun position lua script by mrpeachy 2010
    /home/deegan/sun.lua:69
    sunsethours=(test2[6])+12
    ----

    How could I resolve?
    Thanks
    Hi Degan
    I just posted an updated version of this script here
    http://crunchbanglinux.org/forums/post/123465/#p123465

    take a look and see if that script works for you

    the whole sun moon concept is still a work in progress

  9. #17719
    Join Date
    Oct 2009
    Location
    Under a rock
    Beans
    Hidden!

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by Thewhistlingwind View Post
    Anyone have an idea of how I could set up conky to show my current user-agent?
    do you use more than 1 browser?
    this site tells you your user-agent
    http://whatsmyuseragent.com/

    but the problem is you cant use curl to access the site because then the user-agent is curl and not your browser

    i wrote a lua script that lets conky display open windows and identify the active window
    http://crunchbanglinux.org/forums/post/121198/#p121198

    if you have more than one type of browser open then you could identify which was active and then display info from whatismyuseragent

    but i cant think of any simple way
    Last edited by mrpeachy; May 22nd, 2011 at 02:24 AM.

  10. #17720
    Join Date
    Aug 2010
    Location
    Arizona USA
    Beans
    2,983
    Distro
    Ubuntu Development Release

    Re: Post your .conkyrc files w/ screenshots

    Quote Originally Posted by mrpeachy View Post
    but i cant think of any simple way
    I can't either.

    Too bad we can't prompt the browser to run this from the addy bar:

    Code:
    javascript:alert(navigator.userAgent);
    ...and write the output to a text file.
    Intel ® P4 Extreme Edition 3.4 (Gallatin) || DFI ® LanParty PRO875B rev B1
    Crucial ® Ballistix Tracer PC4000 1GB || Mountain Mods U2-UFO Opti-1203
    XFX 7600GT 560M AGP (PV-T73A-UDF3) || Corsair HX520W Modular PSU

Page 1772 of 2325 FirstFirst ... 7721272167217221762177017711772177317741782182218722272 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •