Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: unable to launch appimages on xubuntu that work on gnome

  1. #1
    Join Date
    Nov 2024
    Beans
    7

    unable to launch appimages on xubuntu that work on gnome

    Hello
    I have a problem launching my appimages on xfce/xubuntu desktops


    libfuse2 is installed, the appimages files are executable. When I run the files, nothing launches.


    What perplexes me is that if I launch gnome, everything works perfectly.


    I am on a freshly installed and update Ubuntu 24.04.1 LTS, xfce/xubuntu was installed using the xubuntu-desktop package (and its dependencies).
    Last edited by com-c; 4 Weeks Ago at 04:04 PM.

  2. #2
    Join Date
    May 2018
    Location
    Here and There
    Beans
    Hidden!
    Distro
    Xubuntu Development Release

    Re: unable to launch appimages on xubuntu that work on gnome

    All mine work with "fuse3"
    NOTE:
    Code:
    apt policy libfuse2 
    libfuse2:
      Installed: (none)
      Candidate: (none)
      Version table:
    "When you practice gratefulness, there is a sense of respect toward others." >>Dalai Lama

  3. #3
    Join Date
    Jun 2007
    Location
    Arizona U.S.A.
    Beans
    5,899

    Re: unable to launch appimages on xubuntu that work on gnome

    libfuse2 is installed, the appimages files are executable. When I run the files, nothing launches.
    Try to start the appimage from the terminal. An error message may tell you what library is missing. Then search for the missing library in Ubuntu Package Search in the "Search the contents of packages" section to find the package containing the library and install it.

    Example of error message:
    error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory
    Last edited by Dennis N; 4 Weeks Ago at 05:35 PM.

  4. #4
    Join Date
    Nov 2024
    Beans
    7

    Re: unable to launch appimages on xubuntu that work on gnome

    Thank you for your interest


    Last edited by com-c; 4 Weeks Ago at 01:27 AM.

  5. #5
    Join Date
    Nov 2024
    Beans
    7

    Re: unable to launch appimages on xubuntu that work on gnome

    Quote Originally Posted by 1fallen2 View Post
    All mine work with "fuse3"
    NOTE:
    Code:
    apt policy libfuse2 
    libfuse2:
      Installed: (none)
      Candidate: (none)
      Version table:
    if I run apt policy libfuse2 in a terminal, I have the same result as you
    Code:
      Installed: (none)
      Candidate: (none)
      Version table:

  6. #6
    Join Date
    Nov 2024
    Beans
    7

    Re: unable to launch appimages on xubuntu that work on gnome

    Quote Originally Posted by Dennis N View Post
    Try to start the appimage from the terminal. An error message may tell you what library is missing. Then search for the missing library in Ubuntu Package Search in the "Search the contents of packages" section to find the package containing the library and install it.

    Example of error message:

    Thank you for your interest


    when i run it in a terminal
    [11621:1105/005050.041984:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /tmp/.mount_LM_StuwS29T2/chrome-sandbox is owned by root and has mode 4755.
    Trappe pour point d'arrêt et de trace (core dumped)
    sudo chmod 4755 /tmp/.mount_LM_StuwS29T2/chrome-sandbox[sudo] Captain password:
    chmod: cannot access '/tmp/.mount_LM_StuwS29T2/chrome-sandbox': No such file or directory
    Last edited by com-c; 4 Weeks Ago at 01:36 AM.

  7. #7
    Join Date
    May 2018
    Location
    Here and There
    Beans
    Hidden!
    Distro
    Xubuntu Development Release

    Re: unable to launch appimages on xubuntu that work on gnome

    Some Appimages need "elevation" to run (sudo) but it would ideal if it prompted for the root password first.

    What appimage is it?



    The normal settings for /tmp are 1777 aka "a=rwx,o+t", which ls shows as drwxrwxrwt.(see my code box) That is: wide open, except that only the owner of a file (or of /tmp, but in that case that's root which has every right anyway) can remove or rename it (that's what this extra t bit means for a directory).

    If your /tmp is a tmpfs filesystem, a reboot will restore everything. Otherwise, run chmod 1777 /tmp.

    Code:
    stat /tmp
      File: /tmp
      Size: 4096          Blocks: 8          IO Block: 4096   directory
    Device: 252,0    Inode: 29360129    Links: 22
    Access: (1777/drwxrwxrwt)  Uid: (    0/    root)   Gid: (    0/    root)
    Access: 2024-11-05 08:56:13.793197868 -0700
    Modify: 2024-11-05 09:08:24.284232293 -0700
    Change: 2024-11-05 09:08:24.284232293 -0700
     Birth: 2024-11-03 08:50:34.693719092 -0700
    Additionally, a lot of files in /tmp need to be private. However, at least one directory critically needs to be world-readable: /tmp/.X11-unix, and possibly some other similar directories (/tmp/.XIM-unix, etc.). The following command should mostly set things right:

    EDIT:
    Code:
     apt policy fuse3
    fuse3:
      Installed: 3.14.0-9
      Candidate: 3.14.0-9
      Version table:
     *** 3.14.0-9 500
            500 http://archive.ubuntu.com/ubuntu plucky/main amd64 Packages
            100 /var/lib/dpkg/status
    Last edited by 1fallen; 4 Weeks Ago at 06:06 PM.
    "When you practice gratefulness, there is a sense of respect toward others." >>Dalai Lama

  8. #8
    Join Date
    Nov 2024
    Beans
    7

    Re: unable to launch appimages on xubuntu that work on gnome

    Quote Originally Posted by 1fallen2 View Post
    Some Appimages need "elevation" to run (sudo) but it would ideal if it prompted for the root password first.

    What appimage is it?
    It seems that the problem is for all appimages, I did the test with balenaEtcher-1.7.9-ia32.AppImage, balenaEtcher-1.18.11-x64.AppImage, LM_Studio-0.3.5.AppImage,


    What I don't understand and what drives me crazy is that it works perfectly under gnome but not under xfce (same PC with multi desktop). In Settings>>Sessions and Startup>>Advanced Tab>>Check Launch Gnome services on startup , Gnome services at startup is already checked



    The normal settings for /tmp are 1777 aka "a=rwx,o+t", which ls shows as drwxrwxrwt.(see my code box) That is: wide open, except that only the owner of a file (or of /tmp, but in that case that's root which has every right anyway) can remove or rename it (that's what this extra t bit means for a directory).

    If your /tmp is a tmpfs filesystem, a reboot will restore everything. Otherwise, run chmod 1777 /tmp.

    Code:
    stat /tmp
      File: /tmp
      Size: 4096          Blocks: 8          IO Block: 4096   directory
    Device: 252,0    Inode: 29360129    Links: 22
    Access: (1777/drwxrwxrwt)  Uid: (    0/    root)   Gid: (    0/    root)
    Access: 2024-11-05 08:56:13.793197868 -0700
    Modify: 2024-11-05 09:08:24.284232293 -0700
    Change: 2024-11-05 09:08:24.284232293 -0700
     Birth: 2024-11-03 08:50:34.693719092 -0700
    Additionally, a lot of files in /tmp need to be private. However, at least one directory critically needs to be world-readable: /tmp/.X11-unix, and possibly some other similar directories (/tmp/.XIM-unix, etc.). The following command should mostly set things right:

    EDIT:
    Code:
     apt policy fuse3
    
    fuse3:
      Installed: 3.14.0-9
      Candidate: 3.14.0-9
      Version table:
     *** 3.14.0-9 500
            500 http://archive.ubuntu.com/ubuntu plucky/main amd64 Packages
            100 /var/lib/dpkg/status


    Code:
    captain@captain-PC-master:~$ stat /tmp  
    Fichier : /tmp
       Taille : 4096          Blocs : 8          Blocs d'E/S : 4096   répertoire
    Périphérique : 259/5    Inœud : 11796481    Liens : 18
    Accès : (1777/drwxrwxrwt)  UID : (    0/    root)   GID : (    0/    root)
    Accès : 2024-11-04 16:29:40.763990112 +0100
    Modif. : 2024-11-05 14:30:38.638112804 +0100
    Changt : 2024-11-05 14:30:38.638112804 +0100
      Créé : 2024-11-02 20:48:55.301638862 +0100
    Code:
    captain@captain-PC-master:~$ apt policy fuse3
    fuse3:
      Installé : 3.14.0-5build1
      Candidat : 3.14.0-5build1
     Table de version :
     *** 3.14.0-5build1 500
            500 http://archive.ubuntu.com/ubuntu noble/main amd64 Packages
            100 /var/lib/dpkg/status
    This did not change the problem
    Last edited by com-c; 4 Weeks Ago at 07:51 PM.

  9. #9
    Join Date
    May 2018
    Location
    Here and There
    Beans
    Hidden!
    Distro
    Xubuntu Development Release

    Re: unable to launch appimages on xubuntu that work on gnome

    I can only speak on XFCE, I have no interest in Gnome. (Sorry)
    Etcher as you know needs elevated privileges:
    Code:
    ─> '/home/me/balenaEtcher-1.9.0-x64.AppImage' 
    [52757:1105/114118.181215:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /tmp/.mount_balenasyf1NY/chrome-sandbox is owned by root and has mode 4755.
    /tmp/.mount_balenasyf1NY/balena-etcher: line 10: 52757 Trace/breakpoint trap   (core dumped) "${script_dir}"/balena-etcher.bin "$@"
    ┌───────────────────>
    But when ran as root:
    Code:
    sudo '/home/me/balenaEtcher-1.9.0-x64.AppImage'
    It works...and I trust this appimage so this will also work, but not recommended:
    Code:
    '/home/me/balenaEtcher-1.9.0-x64.AppImage' --no-sandbox
    All my non Buntu XFCE installs do not need this wonky work around.

    Just Xubuntu...
    "When you practice gratefulness, there is a sense of respect toward others." >>Dalai Lama

  10. #10
    Join Date
    Nov 2024
    Beans
    7

    Re: unable to launch appimages on xubuntu that work on gnome

    Quote Originally Posted by 1fallen View Post
    I can only speak on XFCE, I have no interest in Gnome. (Sorry)
    I also use xfce since xubuntu 20, I had no problem on xubuntu 20 or xubuntu 22, the problem occurred after the update to xubuntu 24. I thought the problem came from the update and that's why I reinstalled everything. Unfortunately for me the problem persists.


    Etcher as you know needs elevated privileges:
    Code:
    ─> '/home/me/balenaEtcher-1.9.0-x64.AppImage' 
    [52757:1105/114118.181215:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /tmp/.mount_balenasyf1NY/chrome-sandbox is owned by root and has mode 4755.
    /tmp/.mount_balenasyf1NY/balena-etcher: line 10: 52757 Trace/breakpoint trap   (core dumped) "${script_dir}"/balena-etcher.bin "$@"
    ┌───────────────────>
    But when ran as root:
    Code:
    sudo '/home/me/balenaEtcher-1.9.0-x64.AppImage'
    Code:
    captain@captain-PC-master:~$ sudo '/home/captain/Modèles/appimage/LM_Studio-0.3.5.AppImage'
     [sudo] Mot de passe de captain : 
    [1106/003247.026876:FATAL:electron_main_delegate.cc(294)] Running as root without --no-sandbox is not supported. See https://crbug.com/638180.
    Trap for breakpoint and trace
    unfortunately it doesn't work for me
    It works...and I trust this appimage so this will also work, but not recommended:
    Code:
    '/home/me/balenaEtcher-1.9.0-x64.AppImage' --no-sandbox
    indeed I agree with you, it is not safe to launch outside sandbox, just like The only working solution I found, but it is non-persistent and also not very secure:
    Code:
    sudo sysctl -w kernel.apparmor_restrict_unprivileged_userns=0
    sudo sysctl -w kernel.apparmor_restrict_unprivileged_unconfined=0
    All my non Buntu XFCE installs do not need this wonky work around.

    Just Xubuntu...
    Last edited by com-c; 4 Weeks Ago at 12:58 AM.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •