First of all this : wireless info script output
When I boot into the OS, for about 10~30 seconds the WiFi shows me the available networks after that my WiFi stops working no internet. when I turn the WiFi off then on the visible networks category just spins forever without giving me any network to log into.
I am new to forums and stuff so, I don't know what all information to put in this post apart from the wireless info script output. Tell me and I will update it
lspci output:
Code:
09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
DeviceName: Skyray
Subsystem: Hewlett-Packard Company RTL8723BE PCIe Wireless Network Adapter [103c:2231]
Kernel driver in use: rtl8723be
rfkill output:
Code:
0: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
1: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
ifconfig output:
Code:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback <MAC address> brd <MAC address>
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host noprefixroute
valid_lft forever preferred_lft forever
2: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether <MAC 'enp8s0' [IF1]> brd <MAC address>
inet 192.168.1.44/24 brd 192.168.1.255 scope global dynamic noprefixroute enp8s0
valid_lft 85780sec preferred_lft 85780sec
inet6 fe80::<IP6 'enp8s0' [IF1]>/64 scope link
valid_lft forever preferred_lft forever
3: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether <MAC 'wlo1' [IF2]> brd <MAC address>
altname wlp9s0