Results 1 to 2 of 2

Thread: lacp not being sent on bond interfaces

  1. #1
    Join Date
    Apr 2017
    Beans
    3

    lacp not being sent on bond interfaces

    No LACP being sent out eno2 or eno3.
    LACP IS being received from the other side.

    LLDP is going out eno2 and eno3.

    Not sure what I'm missing.

    FWIW:
    root@dl380rack1:~# lsb_release -a
    No LSB modules are available.
    Distributor ID: Ubuntu
    Description: Ubuntu 24.04 LTS
    Release: 24.04
    Codename: noble




    root@dl380rack1:~#cat /etc/netplan/50-cloud-init.yaml

    network:
    ethernets:
    eno1:
    dhcp4: true
    eno2:
    dhcp4: false
    dhcp6: false
    eno3:
    dhcp4: false
    dhcp6: false
    eno4:
    dhcp4: true
    ens2f0np0:
    dhcp4: true
    ens2f1np1:
    dhcp4: true
    bonds:
    bond0:
    interfaces:
    - eno2
    - eno3
    parameters:
    mode: 802.3ad
    lacp-rate: slow
    mii-monitor-interval: 100
    version: 2
    ~




    root@dl380rack1:~# cat /proc/net/bonding/bond0
    Ethernet Channel Bonding Driver: v6.8.0-39-generic


    Bonding Mode: IEEE 802.3ad Dynamic link aggregation
    Transmit Hash Policy: layer2 (0)
    MII Status: up
    MII Polling Interval (ms): 100
    Up Delay (ms): 0
    Down Delay (ms): 0
    Peer Notification Delay (ms): 0


    802.3ad info
    LACP active: on
    LACP rate: slow
    Min links: 0
    Aggregator selection policy (ad_select): stable
    System priority: 65535
    System MAC address: 02:5f:a1:a0:2d:01
    Active Aggregator Info:
    Aggregator ID: 1
    Number of ports: 1
    Actor Key: 9
    Partner Key: 1
    Partner Mac Address: 00:00:00:00:00:00


    Slave Interface: eno2
    MII Status: up
    Speed: 1000 Mbps
    Duplex: full
    Link Failure Count: 0
    Permanent HW addr: 98:f2:b3:e7:5e:bd
    Slave queue ID: 0
    Aggregator ID: 1
    Actor Churn State: none
    Partner Churn State: churned
    Actor Churned Count: 0
    Partner Churned Count: 1
    details actor lacp pdu:
    system priority: 65535
    system mac address: 02:5f:a1:a0:2d:01
    port key: 9
    port priority: 255
    port number: 1
    port state: 77
    details partner lacp pdu:
    system priority: 65535
    system mac address: 00:00:00:00:00:00
    oper key: 1
    port priority: 255
    port number: 1
    port state: 1


    This doesn't look quite right:

    root@dl380rack1:~# ethtool bond0
    Settings for bond0:
    Supported ports: [ ]
    Supported link modes: Not reported
    Supported pause frame use: No
    Supports auto-negotiation: No
    Supported FEC modes: Not reported
    Advertised link modes: Not reported
    Advertised pause frame use: No
    Advertised auto-negotiation: No
    Advertised FEC modes: Not reported
    Speed: 1000Mb/s
    Duplex: Full
    Auto-negotiation: off
    Port: Other
    PHYAD: 0
    Transceiver: internal
    Link detected: yes

  2. #2
    Join Date
    Nov 2007
    Location
    London, England
    Beans
    7,742

    Re: lacp not being sent on bond interfaces

    Yaml is indentation sensitive, and this forum normally strips indentation from posts. Please can you repost, and put code tags round the file contents to preserve indentation. The easiest way is to click Go Advanced, and then the editor gives you a # button at the top - highlicht the code secments and click #.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •