Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Conky

  1. #1
    Join Date
    Sep 2020
    Beans
    27
    Distro
    Ubuntu

    Conky

    Hi,

    I have installed
    Code:
    sudo apt install conky-all
    And im trying to setup it up with my AMD GPU with cpu and core temps but so fare I have failed

    sensors info:
    Code:
    sensors
    corsaircpro-hid-3-6
    Adapter: HID adapter
    in0:          12.10 V  
    in1:           4.98 V  
    in2:           3.41 V  
    fan1 4pin:   1511 RPM
    fan2 4pin:   1509 RPM
    temp1:        +34.2C  
    temp2:        +49.6C  
    temp3:        +29.3C  
    temp4:        +30.0C  
    
    k10temp-pci-00c3
    Adapter: PCI adapter
    Tctl:         +37.8C  
    Tccd1:        +39.5C  
    
    nvme-pci-0100
    Adapter: PCI adapter
    Composite:    +37.9C  (low  =  -0.1C, high = +74.8C)
                           (crit = +79.8C)
    
    amdgpu-pci-0900
    Adapter: PCI adapter
    vddgfx:      712.00 mV 
    fan1:           0 RPM  (min =    0 RPM, max = 3300 RPM)
    edge:         +51.0C  (crit = +110.0C, hyst = -273.1C)
                           (emerg = +115.0C)
    junction:     +51.0C  (crit = +105.0C, hyst = -273.1C)
                           (emerg = +110.0C)
    mem:           +0.0C  (crit = +105.0C, hyst = -273.1C)
                           (emerg = +110.0C)
    slowPPT:      19.00 W  (cap = 125.00 W)
    And would like it to match
    Code:
    #--------------------+
    # TEMPS AND FAN SPEED
    #--------------------+
    ${voffset 2}${color1}${font :size=8:bold}TEMPS AND FAN SPEED ${hr 1}${font}
    #CPU
    ${color1}CPU: ${color3}${execi 2 sensors | grep "Package id 0" | awk '{print "            " $4,$5$6$7$8$9$10}'}
    ${color3}${execi 2 sensors | grep "Core" | awk '{print $1,$2"        "$3,$4$5$6$7$8$9}'}
    #GPU
    ${color1}GPU: ${color3}${goto 70}${nvidia temp}C (threshold=${nvidia threshold}C,ambient=C)
    #CPU fan Speed
    ${color1}CPU fan speed:${color3}${execi 2 sensors | grep "fan" | awk '{$1=""; print $0}'}
    I have notived this:
    Code:
    ${color1}GPU: ${color3}${goto 70}${nvidia temp}C (threshold=${nvidia threshold}C,ambient=C)
    which is for nvidia

    Can someone help me figure this out?
    Last edited by klapvogn; February 11th, 2023 at 10:55 PM.

  2. #2
    Join Date
    Oct 2017
    Location
    /dev/sdx
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Conky

    nvidia wont work on AMD GPU hardware. AMD GPU depend on radeontop. You should have to install radeontop first before you apply the following codes below for your AMD GPU.
    In my desktop this command below will show the GPU % usage.
    Code:
    ${offset 1}${color slate grey}GPU: ${color }${execi 5 radeontop -d- -l1 | grep -o 'gpu [0-9]\{1,3\}' | cut -c 5-7 }%
    This is the graph of my CPU in General
    Code:
    ${offset 1}${color slate grey}CPU GRAPH:
    ${offset 1}${color }${cpugraph 20, 198 000000 ffffff}
    4 cores of my CPU. Regards and cheers
    Code:
    ${offset 1}${color }Core-1: (${cpu cpu0}%)
    ${offset 1}${color }${cpubar cpu0 3}
    ${offset 1}${color }Core-2: (${cpu cpu1}%)
    ${offset 1}${color }${cpubar cpu1 3}
    ${offset 1}${color }Core-3: (${cpu cpu2}%)
    ${offset 1}${color }${cpubar cpu2 3}
    ${offset 1}${color }Core-4: (${cpu cpu3}%)
    ${offset 1}${color }${cpubar cpu3 3}
    corn ubuntuforums community.
    Open Source platform where the real world of human is here. Click here for Solve thread

  3. #3
    Join Date
    Sep 2020
    Beans
    27
    Distro
    Ubuntu

    Re: Conky

    Quote Originally Posted by mIk3_08 View Post
    nvidia wont work on AMD GPU hardware. AMD GPU depend on radeontop. You should have to install radeontop first before you apply the following codes below for your AMD GPU.
    In my desktop this command below will show the GPU % usage.
    Code:
    ${offset 1}${color slate grey}GPU: ${color }${execi 5 radeontop -d- -l1 | grep -o 'gpu [0-9]\{1,3\}' | cut -c 5-7 }%
    This is the graph of my CPU in General
    Code:
    ${offset 1}${color slate grey}CPU GRAPH:
    ${offset 1}${color }${cpugraph 20, 198 000000 ffffff}
    4 cores of my CPU. Regards and cheers
    Code:
    ${offset 1}${color }Core-1: (${cpu cpu0}%)
    ${offset 1}${color }${cpubar cpu0 3}
    ${offset 1}${color }Core-2: (${cpu cpu1}%)
    ${offset 1}${color }${cpubar cpu1 3}
    ${offset 1}${color }Core-3: (${cpu cpu2}%)
    ${offset 1}${color }${cpubar cpu2 3}
    ${offset 1}${color }Core-4: (${cpu cpu3}%)
    ${offset 1}${color }${cpubar cpu3 3}
    Thanks a million
    Is it possible to get the ?
    Code:
    C

  4. #4
    Join Date
    Oct 2017
    Location
    /dev/sdx
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Conky

    Quote Originally Posted by klapvogn View Post
    Thanks a million
    Is it possible to get the ?
    Code:
    C
    Here is the conky code for the temperature of your CPU in Celsius.
    Code:
    ${offset 1}${color slate grey}CPU TEMP:${color } ${acpitemp}C
    Here is the conky code for the frequency of your CPU. Regards and cheers
    Code:
    ${offset 1}${color slate grey}CPU FREQ:${color } ${freq_g}GHz
    corn ubuntuforums community.
    Open Source platform where the real world of human is here. Click here for Solve thread

  5. #5
    Join Date
    Sep 2020
    Beans
    27
    Distro
    Ubuntu

    Re: Conky

    Thank, im not getting any temps from
    Code:
    ${offset 1}${color slate grey}CPU TEMP:${color } ${acpitemp}C

  6. #6
    Join Date
    Sep 2020
    Beans
    27
    Distro
    Ubuntu

    Re: Conky

    And hopefully you can answer this to :

    Code:
    sudo apt-get install inxi
    is a fine tool also, so I would use that to. when I do this in Terminal:
    Code:
    inxi -G | grep 'OpenGL: renderer:' | cut -c 20-41
    I get:
    Code:
    AMD Radeon RX 5500 XT
    but the output in conky is blank?
    Last edited by klapvogn; February 12th, 2023 at 06:23 PM.

  7. #7
    Join Date
    Oct 2017
    Location
    /dev/sdx
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Conky

    Can you please run the command below and post the results here in thread wrap with code. Regards and cheers.
    Code:
    hostnamectl
    corn ubuntuforums community.
    Open Source platform where the real world of human is here. Click here for Solve thread

  8. #8
    Join Date
    Apr 2011
    Location
    Mystletainn Kick!
    Beans
    13,611
    Distro
    Ubuntu

    Re: Conky

    This is supposedly your cpu temps

    Code:
    k10temp-pci-00c3
    Adapter: PCI adapter
    Tctl:         +37.8C  
    Tccd1:        +39.5C
    with tccd1 as the actual cpu real temp and tctl as the fan controlling temp, or something. (I don't know, that's just what I got from a very cursory look up, could be completely wrong)

    Most of your sensors output are weird and foreign to me so you'll probably have to wait on someone who also has ( I'm guessing ) a ryzen system.

    Perhaps you could run the Ubuntu forums script which would provide information about the system, in general.
    See: https://ubuntuforums.org/showthread.php?t=2475931

    I mean, we know very little about the system at hand like which kernel is being used, or what version of Ubuntu is installed.
    Running the script will help everyone get a fuller picture of what is what.
    Splat Double Splat Triple Splat
    Earn Your Keep
    Don't mind me, I'm only passing through.
    Once in a blue moon, I'm actually helpful
    .

  9. #9
    Join Date
    Oct 2017
    Location
    /dev/sdx
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: Conky

    Quote Originally Posted by klapvogn View Post
    Thank, im not getting any temps from
    Code:
    ${offset 1}${color slate grey}CPU TEMP:${color } ${acpitemp}C
    You can also try this one. Maybe it will help you. Click here Regards and cheers
    corn ubuntuforums community.
    Open Source platform where the real world of human is here. Click here for Solve thread

  10. #10
    Join Date
    Sep 2020
    Beans
    27
    Distro
    Ubuntu

    Re: Conky

    Code:
     Static hostname: klapvogn-Computer
           Icon name: computer-desktop
             Chassis: desktop
          Machine ID: d0ee8e6f943e458582ae6285a86e6e75
             Boot ID: 50a82e2216694952af36c25b732a2784
    Operating System: Ubuntu 22.04.1 LTS              
              Kernel: Linux 5.15.0-60-generic
        Architecture: x86-64
     Hardware Vendor: MM-Vision
      Hardware Model: Computer

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •