Ralink RT5370 wireless usb adapter stops working with vendor request 0x0[67] failed error on Ubuntu 22.04LTS mainstream kernel (and, on previous releases too - 18.04,20.04), if some network load happens. Is there any solution, f.e. some another branch kernel, firmware or alternative driver?
Code:
/var/log/syslog.1:Jan 24 18:29:42 mrouter03 kernel: [31167.382430] ieee80211 phy24: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -110
/var/log/syslog.1:Jan 24 18:29:49 mrouter03 kernel: [31174.104207] ieee80211 phy24: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0218 with error -110
/var/log/syslog.1:Jan 24 18:29:49 mrouter03 kernel: [31174.164146] ieee80211 phy24: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x021c with error -110
Also, warnings sometimes
Code:
/var/log/syslog.1:Jan 24 18:59:24 mrouter03 kernel: [ 229.704877] ieee80211 phy0: rt2800_txdone: Warning - Data pending for entry 15 in queue 2
/var/log/syslog.1:Jan 24 19:00:25 mrouter03 kernel: [ 290.654902] ieee80211 phy0: rt2800_txdone: Warning - Data pending for entry 13 in queue 2
Code:
rmmod rt2800usb
modprobe rt2800usb
helps for some time, then problem repeats.
Code:
# lsusb | grep 5370 | grep -v grep
Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
# dmesg | grep -E '(usb 1-1|phy[0-9]|5370)'
[ 3.375263] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.771406] usb 1-1: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01
[ 3.772126] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.802128] usb 1-1: Product: 802.11 n WLAN
[ 3.832815] usb 1-1: Manufacturer: Ralink
[ 3.862589] usb 1-1: SerialNumber: 1.0
[ 23.426118] usb 1-1: reset high-speed USB device number 2 using ehci-pci
[ 23.816759] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 24.273559] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 24.275621] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 31.708413] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 31.719186] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36