Results 1 to 2 of 2

Thread: Ralink RT5370 wireless usb adapter stops working with vendor request 0x0[67] failed

Hybrid View

  1. #1
    Join Date
    Jan 2023
    Beans
    1

    Ralink RT5370 wireless usb adapter stops working with vendor request 0x0[67] failed

    Ralink RT5370 wireless usb adapter stops working with vendor request 0x0[67] failed error on Ubuntu 22.04LTS mainstream kernel (and, on previous releases too - 18.04,20.04), if some network load happens. Is there any solution, f.e. some another branch kernel, firmware or alternative driver?

    Code:
    /var/log/syslog.1:Jan 24 18:29:42 mrouter03 kernel: [31167.382430] ieee80211 phy24: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1700 with error -110
    /var/log/syslog.1:Jan 24 18:29:49 mrouter03 kernel: [31174.104207] ieee80211 phy24: rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x0218 with error -110
    /var/log/syslog.1:Jan 24 18:29:49 mrouter03 kernel: [31174.164146] ieee80211 phy24: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x021c with error -110
    Also, warnings sometimes

    Code:
    /var/log/syslog.1:Jan 24 18:59:24 mrouter03 kernel: [  229.704877] ieee80211 phy0: rt2800_txdone: Warning - Data pending for entry 15 in queue 2
    /var/log/syslog.1:Jan 24 19:00:25 mrouter03 kernel: [  290.654902] ieee80211 phy0: rt2800_txdone: Warning - Data pending for entry 13 in queue 2
    Code:
    rmmod rt2800usb
    modprobe rt2800usb
    helps for some time, then problem repeats.

    Code:
     
    # lsusb | grep 5370 | grep -v grep
    Bus 001 Device 002: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
    
    # dmesg | grep -E '(usb 1-1|phy[0-9]|5370)'
    [    3.375263] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [    3.771406] usb 1-1: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01
    [    3.772126] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    3.802128] usb 1-1: Product: 802.11 n WLAN
    [    3.832815] usb 1-1: Manufacturer: Ralink
    [    3.862589] usb 1-1: SerialNumber: 1.0
    [   23.426118] usb 1-1: reset high-speed USB device number 2 using ehci-pci
    [   23.816759] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
    [   24.273559] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
    [   24.275621] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   31.708413] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
    [   31.719186] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
    Last edited by kenga13; January 25th, 2023 at 01:49 PM.

  2. #2
    Join Date
    Apr 2007
    Beans
    Hidden!

    Re: Ralink RT5370 wireless usb adapter stops working with vendor request 0x0[67] fail

    I'm having the same issue. I have a very cheap and small USB wlan adapter and apparently it is RT5370 based:


    Code:
    $ sudo dmesg | grep -E '(usb 3-2|phy[0-9]|5370)'
    [    1.444285] usb 3-2: new high-speed USB device number 2 using xhci_hcd
    [    1.610006] usb 3-2: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01
    [    1.610017] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    1.610020] usb 3-2: Product: 802.11 n WLAN
    [    1.610023] usb 3-2: Manufacturer: Ralink
    [    1.610026] usb 3-2: SerialNumber: 1.0
    [   38.120613] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
    [   38.286908] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
    [   38.297601] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
    [   38.297745] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [   38.347870] rt2800usb 3-2:1.0 wlx243c2009181e: renamed from wlan0
    [   52.953989] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
    [   53.348536] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
    [  282.683900] ieee80211 phy0: rt2800_txdone: Warning - Data pending for entry 5 in queue 2
    [  282.683937] ieee80211 phy0: rt2800_txdone: Warning - Data pending for entry 5 in queue 2
    But as it is cheap and in an USB slot, I could as well replace it with something better. Any suggestions?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •