Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Gimp Startrail plugin instilation

  1. #1
    Join Date
    Jul 2006
    Location
    San Diego California
    Beans
    114
    Distro
    Ubuntu 18.04 Bionic Beaver

    Gimp Startrail plugin instilation

    https://www.facebook.com/astronomyli...2501992854642/
    I found the above link to install startrail.py In Gimp 2.10.24 in Ubuntu 18.04. the post their is from (12/29/19). I tried it and received the following error
    Code:
    joe@joe-GA-78LMT-USB3:~$ sudo apt-get install gimp-python
    [sudo] password for joe: 
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Note, selecting 'gimp' instead of 'gimp-python'
    The following additional packages will be installed:
      gimp-data libamd2 libbabl-0.1-0 libcamd2 libccolamd2 libcholmod3
      libgegl-0.3-0 libgimp2.0 libmetis5 libumfpack5 python-cairo python-gobject-2
      python-gtk2
    Suggested packages:
      gimp-help-en | gimp-help gimp-data-extras python-gobject-2-dbg
      python-gtk2-doc
    The following NEW packages will be installed:
      gimp gimp-data libamd2 libbabl-0.1-0 libcamd2 libccolamd2 libcholmod3
      libgegl-0.3-0 libgimp2.0 libmetis5 libumfpack5 python-cairo python-gobject-2
      python-gtk2
    0 upgraded, 14 newly installed, 0 to remove and 0 not upgraded.
    Need to get 14.9 MB of archives.
    After this operation, 76.6 MB of additional disk space will be used.
    Do you want to continue? [Y/n] y
    Get:1 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 libgimp2.0 amd64 2.8.22-1 [765 kB]
    Get:2 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 gimp-data all 2.8.22-1 [7,800 kB]
    Get:3 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 python-cairo amd64 1.16.2-1 [56.4 kB]
    Get:4 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 python-gobject-2 amd64 2.28.6-12ubuntu3 [180 kB]
    Get:5 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 python-gtk2 amd64 2.24.0-5.1ubuntu2 [619 kB]
    Get:6 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 libbabl-0.1-0 amd64 0.1.44-1 [249 kB]
    Get:7 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 libamd2 amd64 1:5.1.2-2 [19.5 kB]
    Get:8 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 libcamd2 amd64 1:5.1.2-2 [20.9 kB]
    Get:9 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 libccolamd2 amd64 1:5.1.2-2 [21.7 kB]
    Get:10 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 libmetis5 amd64 5.1.0.dfsg-5 [169 kB]
    Get:11 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 libcholmod3 amd64 1:5.1.2-2 [300 kB]
    Get:12 http://us.archive.ubuntu.com/ubuntu bionic/main amd64 libumfpack5 amd64 1:5.1.2-2 [229 kB]
    Get:13 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 libgegl-0.3-0 amd64 0.3.30-1ubuntu1 [827 kB]
    Get:14 http://us.archive.ubuntu.com/ubuntu bionic/universe amd64 gimp amd64 2.8.22-1 [3,672 kB]
    Fetched 14.9 MB in 7s (2,038 kB/s)                                             
    Selecting previously unselected package libgimp2.0.
    (Reading database ... 335683 files and directories currently installed.)
    Preparing to unpack .../00-libgimp2.0_2.8.22-1_amd64.deb ...
    Unpacking libgimp2.0 (2.8.22-1) ...
    Selecting previously unselected package gimp-data.
    Preparing to unpack .../01-gimp-data_2.8.22-1_all.deb ...
    Unpacking gimp-data (2.8.22-1) ...
    Selecting previously unselected package python-cairo:amd64.
    Preparing to unpack .../02-python-cairo_1.16.2-1_amd64.deb ...
    Unpacking python-cairo:amd64 (1.16.2-1) ...
    Selecting previously unselected package python-gobject-2.
    Preparing to unpack .../03-python-gobject-2_2.28.6-12ubuntu3_amd64.deb ...
    Unpacking python-gobject-2 (2.28.6-12ubuntu3) ...
    Selecting previously unselected package python-gtk2.
    Preparing to unpack .../04-python-gtk2_2.24.0-5.1ubuntu2_amd64.deb ...
    Unpacking python-gtk2 (2.24.0-5.1ubuntu2) ...
    Selecting previously unselected package libbabl-0.1-0:amd64.
    Preparing to unpack .../05-libbabl-0.1-0_0.1.44-1_amd64.deb ...
    Unpacking libbabl-0.1-0:amd64 (0.1.44-1) ...
    Selecting previously unselected package libamd2:amd64.
    Preparing to unpack .../06-libamd2_1%3a5.1.2-2_amd64.deb ...
    Unpacking libamd2:amd64 (1:5.1.2-2) ...
    Selecting previously unselected package libcamd2:amd64.
    Preparing to unpack .../07-libcamd2_1%3a5.1.2-2_amd64.deb ...
    Unpacking libcamd2:amd64 (1:5.1.2-2) ...
    Selecting previously unselected package libccolamd2:amd64.
    Preparing to unpack .../08-libccolamd2_1%3a5.1.2-2_amd64.deb ...
    Unpacking libccolamd2:amd64 (1:5.1.2-2) ...
    Selecting previously unselected package libmetis5:amd64.
    Preparing to unpack .../09-libmetis5_5.1.0.dfsg-5_amd64.deb ...
    Unpacking libmetis5:amd64 (5.1.0.dfsg-5) ...
    Selecting previously unselected package libcholmod3:amd64.
    Preparing to unpack .../10-libcholmod3_1%3a5.1.2-2_amd64.deb ...
    Unpacking libcholmod3:amd64 (1:5.1.2-2) ...
    Selecting previously unselected package libumfpack5:amd64.
    Preparing to unpack .../11-libumfpack5_1%3a5.1.2-2_amd64.deb ...
    Unpacking libumfpack5:amd64 (1:5.1.2-2) ...
    Selecting previously unselected package libgegl-0.3-0:amd64.
    Preparing to unpack .../12-libgegl-0.3-0_0.3.30-1ubuntu1_amd64.deb ...
    Unpacking libgegl-0.3-0:amd64 (0.3.30-1ubuntu1) ...
    Selecting previously unselected package gimp.
    Preparing to unpack .../13-gimp_2.8.22-1_amd64.deb ...
    Unpacking gimp (2.8.22-1) ...
    Setting up libgimp2.0 (2.8.22-1) ...
    Setting up libbabl-0.1-0:amd64 (0.1.44-1) ...
    Setting up libcamd2:amd64 (1:5.1.2-2) ...
    Setting up gimp-data (2.8.22-1) ...
    Setting up python-gobject-2 (2.28.6-12ubuntu3) ...
    Setting up libamd2:amd64 (1:5.1.2-2) ...
    Setting up libmetis5:amd64 (5.1.0.dfsg-5) ...
    Setting up python-cairo:amd64 (1.16.2-1) ...
    Setting up libccolamd2:amd64 (1:5.1.2-2) ...
    Setting up python-gtk2 (2.24.0-5.1ubuntu2) ...
    Setting up libcholmod3:amd64 (1:5.1.2-2) ...
    Setting up libumfpack5:amd64 (1:5.1.2-2) ...
    Setting up libgegl-0.3-0:amd64 (0.3.30-1ubuntu1) ...
    Setting up gimp (2.8.22-1) ...
    Processing triggers for man-db (2.8.3-2ubuntu0.1) ...
    Processing triggers for gnome-menus (3.13.3-11ubuntu1.1) ...
    Processing triggers for hicolor-icon-theme (0.17-2) ...
    Processing triggers for mime-support (3.60ubuntu1) ...
    Processing triggers for desktop-file-utils (0.23-1ubuntu3.18.04.2) ...
    Processing triggers for libc-bin (2.27-3ubuntu1.4) ...
    joe@joe-GA-78LMT-USB3:~$ wget https://raw.githubusercontent.com/.....r/startrail.py | tee startrail.py
    --2021-11-07 18:36:13--  https://raw.githubusercontent.com/.....r/startrail.py
    Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.111.133, 185.199.110.133, ...
    Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected.
    HTTP request sent, awaiting response... 400 Bad Request
    2021-11-07 18:36:13 ERROR 400: Bad Request.
    
    joe@joe-GA-78LMT-USB3:~$ wget https://raw.githubusercontent.com/.....r/startrail.py | tee startrail.py
    --2021-11-07 18:39:18--  https://raw.githubusercontent.com/.....r/startrail.py
    Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 185.199.109.133, 185.199.108.133, 185.199.111.133, ...
    Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|185.199.109.133|:443... connected.
    HTTP request sent, awaiting response... 400 Bad Request
    2021-11-07 18:39:18 ERROR 400: Bad Request.
    
    joe@joe-GA-78LMT-USB3:~$
    Any help would be appreciated (I'm not great with the command line)
    Last edited by deadflowr; November 8th, 2021 at 04:52 AM. Reason: code tags

  2. #2
    Join Date
    Jul 2008
    Location
    The Left Coast of the USA
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Gimp Startrail plugin instilation

    Judging from the messages, I would suggest that the resources no longer exist or the URL is malformed.

    On possible source of malformation: Check that you are using the correct and complete URL: That is, don't cut and paste instructions from the Facebook page, as it has the ellipses in it. Use the full URL without ellipses.

    Code:
    https://raw.githubusercontent.com/themaninthesuitcase/gimp-startrail-compositor/master/startrail.py
    Last edited by QIII; November 8th, 2021 at 05:12 AM.
    Please read The Forum Rules and The Forum Posting Guidelines

    A thing discovered and kept to oneself must be discovered time and again by others. A thing discovered and shared with others need be discovered only the once.
    This universe is crazy. I'm going back to my own.

  3. #3
    Join Date
    Aug 2013
    Beans
    4,790

    Re: Gimp Startrail plugin instilation

    The facebook link actually provides a link to the actual github site https://github.com/themaninthesuitca...ail-compositor, just click the code tab and download the zip file, unzip, put the .py file in ~/.config/GIMP/2.10/plug-ins
    make sure the .py script is executable (right click > Properties > allow to execute)


    No sure if it would work though since it has not been updated since 2016. BTW there is no package called gimp-python (as your output shows) Not sure what that is.
    Last edited by monkeybrain20122; November 8th, 2021 at 05:41 AM.

  4. #4
    Join Date
    Jul 2006
    Location
    San Diego California
    Beans
    114
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: Gimp Startrail plugin instilation

    Tried this
    joe@joe-GA-78LMT-USB3:~$ wget https://github.com/themaninthesuitca...r/startrail.py | tee startrail.py
    --2021-11-07 20:36:52-- https://github.com/themaninthesuitca...r/startrail.py
    Resolving github.com (github.com)... 192.30.255.113
    Connecting to github.com (github.com)|192.30.255.113|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
    Saving to: ‘startrail.py.2’

    startrail.py.2 [ <=> ] 233.09K 845KB/s in 0.3s

    2021-11-07 20:36:53 (845 KB/s) - ‘startrail.py.2’ saved [238684]

    joe@joe-GA-78LMT-USB3:~$ mv startrail.py.1 startrail.py
    joe@joe-GA-78LMT-USB3:~$ sudo cp startrail.py /usr/lib/gimp/2.0/plug-ins/
    [sudo] password for joe:
    joe@joe-GA-78LMT-USB3:~$ sudo chmod +x /usr/lib/gimp/2.0/plug-ins/startrail.py
    joe@joe-GA-78LMT-USB3:~$ rm startrail.py
    joe@joe-GA-78LMT-USB3:~$

  5. #5
    Join Date
    Jul 2008
    Location
    The Left Coast of the USA
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Gimp Startrail plugin instilation

    @Joe_Linux

    If you don't enclose your terminal commands and their results in code tags, formatting in lost. In this case, we cannot see the actual URLs without hovering. Using code tags preserves all formatting and make things easier to read.

    Please re-post, enclosing the command(s) and results in code tags:


    1. If you are using the "Reply to Thread" button, please click the # button, place your cursor between the code tags and type or paste your text.

    2. If using "Quick Reply" then type [code] at the beginning and [/code] at the end. The square brackets are required.
    Please read The Forum Rules and The Forum Posting Guidelines

    A thing discovered and kept to oneself must be discovered time and again by others. A thing discovered and shared with others need be discovered only the once.
    This universe is crazy. I'm going back to my own.

  6. #6
    Join Date
    Jul 2006
    Location
    San Diego California
    Beans
    114
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: Gimp Startrail plugin instilation

    Code:
    joe@joe-GA-78LMT-USB3:~$ wget https://github.com/themaninthesuitca...r/startrail.py | tee startrail.py
    --2021-11-07 20:36:52-- https://github.com/themaninthesuitca...r/startrail.py
    Resolving github.com (github.com)... 192.30.255.113
    Connecting to github.com (github.com)|192.30.255.113|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
    Saving to: ‘startrail.py.2’
    
    startrail.py.2 [ <=> ] 233.09K 845KB/s in 0.3s
    
    2021-11-07 20:36:53 (845 KB/s) - ‘startrail.py.2’ saved [238684]
    
    joe@joe-GA-78LMT-USB3:~$ mv startrail.py.1 startrail.py
    joe@joe-GA-78LMT-USB3:~$ sudo cp startrail.py /usr/lib/gimp/2.0/plug-ins/
    [sudo] password for joe:
    joe@joe-GA-78LMT-USB3:~$ sudo chmod +x /usr/lib/gimp/2.0/plug-ins/startrail.py
    joe@joe-GA-78LMT-USB3:~$ rm startrail.py
    joe@joe-GA-78LMT-USB3:~$
    Tried the above
    Last edited by Joe_Linux; November 8th, 2021 at 06:14 AM.

  7. #7
    Join Date
    Jul 2008
    Location
    The Left Coast of the USA
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Gimp Startrail plugin instilation

    Try it as in bullet #1.

    I believe you should have gotten

    Code:
    joe@joe-GA-78LMT-USB3:~$ wget https://github.com/themaninthesuitcase/gimp-startrail-compositor/blob/master/startrail.py | tee startrail.py
    --2021-11-07 20:36:52-- https://github.com/themaninthesuitcase/gimp-startrail-compositor/blob/master/startrail.py
    Resolving github.com (github.com)... 192.30.255.113
    Connecting to github.com (github.com)|192.30.255.113|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
    Saving to: ‘startrail.py.2’
    
    startrail.py.2 [ <=> ] 233.09K 845KB/s in 0.3s 
    
    2021-11-07 20:36:53 (845 KB/s) - ‘startrail.py.2’ saved [238684]
    
    joe@joe-GA-78LMT-USB3:~$ mv startrail.py.1 startrail.py
    joe@joe-GA-78LMT-USB3:~$ sudo cp startrail.py /usr/lib/gimp/2.0/plug-ins/
    [sudo] password for joe: 
    joe@joe-GA-78LMT-USB3:~$ sudo chmod +x /usr/lib/gimp/2.0/plug-ins/startrail.py
    joe@joe-GA-78LMT-USB3:~$ rm startrail.py
    joe@joe-GA-78LMT-USB3:~$
    with the URLs preserved. In this case, don't paste and then enclose. Click the # to get the code tags, then paste your text between.

    You said you did something, but you did not tell us what happened. Did this work as you expected it to?
    Last edited by QIII; November 8th, 2021 at 06:20 AM.
    Please read The Forum Rules and The Forum Posting Guidelines

    A thing discovered and kept to oneself must be discovered time and again by others. A thing discovered and shared with others need be discovered only the once.
    This universe is crazy. I'm going back to my own.

  8. #8
    Join Date
    Jul 2006
    Location
    San Diego California
    Beans
    114
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: Gimp Startrail plugin instilation

    QIII
    I do not understand your instruction Try it as in bullet #1. Also I do not understand with the URLs preserved. In this case, don't paste and then enclose. Click the # to get the code tags, then paste your text between.
    Sorry for my ignorance.

  9. #9
    Join Date
    Jul 2006
    Location
    San Diego California
    Beans
    114
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: Gimp Startrail plugin instilation

    QIII

    Sorry for my ignorance.
    Last edited by Joe_Linux; November 15th, 2021 at 07:47 PM.

  10. #10
    Join Date
    Jul 2006
    Location
    San Diego California
    Beans
    114
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: Gimp Startrail plugin instilation

    I did the following gimp-startrail-compositor still not showing up in create menu in gimp
    Code:
    joe@joe-GA-78LMT-USB3:~$ wget https://github.com/themaninthesuitcase/gimp-startrail-compositor/blob/master/startrail.py | tee startrail.p
    --2021-11-15 21:36:06--  https://github.com/themaninthesuitcase/gimp-startrail-compositor/blob/master/startrail.py
    Resolving github.com (github.com)... 192.30.255.113
    Connecting to github.com (github.com)|192.30.255.113|:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
    Saving to: ‘startrail.py.2’
    
    startrail.py.2                         [  <=>                                                            ] 251.02K  1.08MB/s    in 0.2s    
    
    2021-11-15 21:36:07 (1.08 MB/s) - ‘startrail.py.2’ saved [257041]
    
    joe@joe-GA-78LMT-USB3:~$  mv startrail.py.1 startrail.py
    joe@joe-GA-78LMT-USB3:~$ sudo cp startrail.py /usr/lib/gimp/2.0/plug-ins/
    [sudo] password for joe: 
    Sorry, try again.
    [sudo] password for joe: 
    joe@joe-GA-78LMT-USB3:~$ sudo chmod +x /usr/lib/gimp/2.0/plug-ins/startrail.py
    joe@joe-GA-78LMT-USB3:~$ rm startrail.py
    joe@joe-GA-78LMT-USB3:~$
    Last edited by Joe_Linux; November 16th, 2021 at 07:05 AM.

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •