Results 1 to 5 of 5

Thread: Kernel 5.13 RC (Release Candidate) series

  1. #1
    Join Date
    Feb 2011
    Location
    Coquitlam, B.C. Canada
    Beans
    2,947
    Distro
    Ubuntu Development Release

    Kernel 5.13 RC (Release Candidate) series

    Hi All,

    Kernel 5.13-rc1 has been released and is on the Ubuntu mainline PPA. I have not tried it yet, but shortly. My knowledge if changes is limited, but I know: turbostat has been fixed for use with recent AMD processors; There is now user space access to TCC offset for a limited number of Intel processors, and turbostat is aware of the offset, but also for a limited number of processors.

    EDIT: Compile fails for me:

    Code:
     LD [M]  drivers/iio/pressure/st_pressure.o
    error: the following would cause module name conflict:
      drivers/clk/xilinx/xlnx_vcu.ko
      drivers/soc/xilinx/xlnx_vcu.ko
    make[4]: *** [Makefile:1758: modules_check] Error 1
    make[4]: *** Waiting for unfinished jobs....
    ...
    make[3]: *** [debian/rules:7: build-arch] Error 2
    dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
    make[2]: *** [scripts/Makefile.package:83: bindeb-pkg] Error 2
    make[1]: *** [Makefile:1557: bindeb-pkg] Error 2
    make: *** [Makefile:346: __build_one_by_one] Error 2
    And from the last cycle, I can't install the Ubuntu compiled version on my 20.04 server due to Requires libc >=2.33.

    EDIT: Forgot link back trail:

    Previous cycle threads: 5.12,5.11, 5.10, 5.9, 5.8, 5.7, 5.6, 5.5, 5.4, 5.3, 5.2, 5.1, 5.0, 4.20, 4.19 ?, 4.18, 4.17, 4.16, 4.15, 4.14.

    EDIT: In a mindless attempt to get it to compile, I changed "CONFIG_XILINX_VCU=m" to not set, but then got other compile errors.

    It is not clear to me why mainline compiled properly for Ubuntu, but not on my system.

    EDIT: I think this might be the source of my problem, but I do not yet know why.

    Code:
    commit 1a998be620a10000c1e1240026e4bd6bc3378c96
    Author: Masahiro Yamada <masahiroy@kernel.org>
    Date:   Wed Mar 31 22:38:05 2021 +0900
    
        kbuild: check module name conflict for external modules as well
    
        If there are multiple modules with the same name in the same external
        module tree, there is ambiguity about which one will be loaded, and
        very likely something odd is happening.
    
        Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
    EDIT: A "make clean" before compile fixed the problem. Typically, I never run "make clean".

    EDIT: O.K., finally: And I'll show an example of the new TCC offset (only available for a few processors so far):

    Code:
    $ uname -a
    Linux s19 5.13.0-rc1-tcc #888 SMP PREEMPT Mon May 10 06:34:42 PDT 2021 x86_64 x86_64 x86_64 GNU/Linux
    
    # what is the module name?
    $ locate tcc | grep "\.ko"
    /usr/lib/modules/5.13.0-051300rc1-lowlatency/kernel/drivers/thermal/intel/intel_tcc_cooling.ko
    
    # load it (example only, it is built in in the kernel I am actually running):
    $ sudo modprobe intel_tcc_cooling.ko
    
    # and which cooling zone does it turn out to be?
    $ grep . /sys/devices/virtual/thermal/cooling_device*/type
    /sys/devices/virtual/thermal/cooling_device0/type:Fan
    /sys/devices/virtual/thermal/cooling_device10/type:Processor
    ...
    /sys/devices/virtual/thermal/cooling_device17/type:intel_powerclamp
    /sys/devices/virtual/thermal/cooling_device18/type:TCC Offset
    /sys/devices/virtual/thermal/cooling_device1/type:Fan
    ...
    
    # O.K. so 18. Set a 30 degrees offset, for a test. (I actually use 24 normally)
    $ echo 30 | sudo tee /sys/devices/virtual/thermal/cooling_device18/cur_state
    30
    
    # Now run turbostat, meanwhile apply a huge load via prime95 torture test:
    $ sudo /home/doug/temp-k-git/linux/tools/power/x86/turbostat/turbostat --Summary --show Busy%,Bzy_MHz,IRQ,PkgWatt,PkgTmp,RAMWatt,GFXWatt --interval 15
    turbostat version 21.05.04 - Len Brown <lenb@kernel.org>
    ...
    cpu0: MSR_PKG_POWER_INFO: 0x000003e8 (125 W TDP, RAPL 0 - 0 W, 0.000000 sec.)
    cpu0: MSR_PKG_POWER_LIMIT: 0x428440001b83e8 (UNlocked)
    cpu0: PKG Limit #1: ENabled (125.000000 Watts, 8.000000 sec, clamp ENabled)
    cpu0: PKG Limit #2: ENabled (136.000000 Watts, 0.002441* sec, clamp DISabled)
    ...
    cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x1e64140d (70 C) (100 default - 30 offset)
    ...
    Busy%   Bzy_MHz IRQ     PkgTmp  PkgWatt GFXWatt RAMWatt
    0.02    1182    596     35      1.57    0.00    0.89
    0.03    1123    605     34      1.64    0.00    0.89
    80.21   4530    146921  67      107.26  0.00    0.89 <<< Power limit 2 engaged
    98.93   4524    180356  66      130.02  0.00    0.89 <<< Power limits 2 and 1
    99.74   4500    180316  67      124.91  0.00    0.89 <<< Power limit 1
    99.70   4493    180356  69      124.92  0.00    0.89
    99.67   4488    180343  71      124.91  0.00    0.89 <<< Temperature climbs
    99.64   4483    180361  72      124.91  0.00    0.89 <<< There is a time constant involved. On this computer set in BIOS.
    99.67   4448    181070  71      122.04  0.00    0.89 <<< TCC offset throttles
    99.76   4367    180303  69      114.03  0.00    0.89
    99.76   4307    180406  71      107.46  0.00    0.89
    99.76   4268    180300  70      105.09  0.00    0.89
    43.23   4218    78686   47      45.53   0.00    0.89    <<< load removed
    Last edited by Doug S; May 10th, 2021 at 03:30 PM.
    Any follow-up information on your issue would be appreciated. Please have the courtesy to report back.

  2. #2
    Join Date
    Oct 2008
    Location
    ExodusHair<Čubura
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Kernel 5.13 RC (Release Candidate) series

    Code:
    :~$ uname -r
    5.13.0-051300rc1-lowlatency
    While Mainline is down there is freshly brewed WIP kernel from Canonical:
    Code:
    :~$ uname -r
    5.13.0-1-generic
    :~$ apt policy linux-generic-wip
    linux-generic-wip:
      Инсталиран: 5.13.0.1.12
      Кандидат:   5.13.0.1.12
      Табела издања:
     *** 5.13.0.1.12 500
            500 http://ppa.launchpad.net/canonical-kernel-team/unstable/ubuntu devel/main amd64 Packages
            100 /var/lib/dpkg/status
    Nice.
    Last edited by zika; May 13th, 2021 at 07:28 AM.
    Ignota nulla curatio morbi.

  3. #3
    Join Date
    Feb 2011
    Location
    Coquitlam, B.C. Canada
    Beans
    2,947
    Distro
    Ubuntu Development Release

    Re: Kernel 5.13 RC (Release Candidate) series

    I missed 5.13-rc2, and now 5.13-rc3 failed to compile for AMD64, because the disk seems to be full:

    Code:
    ld: vmlinux.o: final close failed: No space left on device
    make[2]: *** [/home/kernel/COD/linux/Makefile:1197: vmlinux] Error 1
    make[2]: Leaving directory '/home/kernel/COD/linux/debian/build/build-lowlatency'
    make[1]: *** [Makefile:215: __sub-make] Error 2
    make[1]: Leaving directory '/home/kernel/COD/linux'
    make: *** [debian/rules.d/2-binary-arch.mk:50: /home/kernel/COD/linux/debian/stamps/stamp-build-lowlatency] Error 2
    dpkg-buildpackage: error: debian/rules build subprocess returned exit status 2
    Anyway, I compiled myself using the slightly modified kernel config file from -rc1, but only have a few minutes use on it so far:

    Code:
    doug@s19:~$ uname -a
    Linux s19 5.13.0-rc3-stock #891 SMP PREEMPT Mon May 24 07:23:48 PDT 2021 x86_64 x86_64 x86_64 GNU/Linux
    Last edited by Doug S; 3 Weeks Ago at 03:49 PM.
    Any follow-up information on your issue would be appreciated. Please have the courtesy to report back.

  4. #4
    Join Date
    Feb 2011
    Location
    Coquitlam, B.C. Canada
    Beans
    2,947
    Distro
    Ubuntu Development Release

    Re: Kernel 5.13 RC (Release Candidate) series

    Kernel 5.13-rc4 is available. This week the AMD64 version compiled O.K. My server is 20.04 based, and so I have to compile it myself, due to the ongoing library dependency issue.

    Only been running for a few minutes, so far.

    Code:
    doug@s19:~$ uname -a
    Linux s19 5.13.0-rc4-stock #893 SMP PREEMPT Mon May 31 06:41:36 PDT 2021 x86_64 x86_64 x86_64 GNU/Linux
    Any follow-up information on your issue would be appreciated. Please have the courtesy to report back.

  5. #5
    Join Date
    Apr 2019
    Beans
    15

    Re: Kernel 5.13 RC (Release Candidate) series

    I always liked to wake-up the temple Doug.

    Code:
     ls /boot
    config-5.13.0-051300rc4-generic  initrd.img                           System.map-5.13.0-051300rc4-generic  vmlinuz-5.4.0-73-generic
    config-5.4.0-73-generic          initrd.img-5.13.0-051300rc4-generic  System.map-5.4.0-73-generic          vmlinuz.old
    efi                              initrd.img-5.4.0-73-generic          vmlinuz
    grub                             initrd.img.old                       vmlinuz-5.13.0-051300rc4-generic
    Code:
     glxinfo | grep "OpenGL version"
    OpenGL version string: 4.6 (Compatibility Profile) Mesa 21.2.0-devel (git-bd79c89 2021-06-01 focal-oibaf-ppa)

    Take care of yourself mate,
    Last edited by xyz-t; 2 Weeks Ago at 05:29 PM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •