I was wondering if anybody knows how to install a battery back up package Belkin 550VA: https://www.belkin.com/us/support-pr...0000000U38PAAS
In the manual after Apple/Microsoft install they have this paragraph:
" Other Platforms • This CD provides two installation modes: GUI mode and Console mode. Enter the directory according the system and run setup.bin or setup_console.bin to start the installation program. Note: For UnixWare, Irix and Tru64 platform, make sure JRE1.3.1 has been install in your system, then enter the /GenericUnix directory and run setup.bin or setup_console.bin to start the setup. • Read the information provided, then click Next. • Review the installation options that you have selected. If the options are correct, then click Install to begin the installation. • When the installation program is completed, click Done"
When I open the CD file I found this very long document:
#!/bin/sh
# Copyright (c) 2001, Belkin Components.
# Script Name: install
# Platform: Linux (RedHat 5.2)
# Date: Dec/06/2001
# Description: Bulldog Plus Installation Program
INSTALL_PATH=""
check_user()
{
set `/usr/bin/whoami`
if [ $1 != "root" ]
then
echo "You must login under root to execute the program."
echo "Bye !"
exit
fi
}
check_exist()
{
exist=`/bin/ps x | grep upsd | awk '$5 ~ /\x2fupsd/ { print $1 }'`
if [ -n "$exist" ]
then
echo "The upsd daemon is running, so you must stop it before installation."
echo "Bye !"
exit
fi
}
disp_title()
{
clear
echo "+----------------------------------------------+"
echo "| Belkin Bulldog Plus Installation Program |"
echo "+----------------------------------------------+"
echo
}
delay()
{
echo -n "."
}
set_COMPort()
{
echo
echo "Please enter the COM port which connects to your UPS."
echo "For example: COM1 is /dev/ttyS0, COM2 is /dev/ttyS1, USB is /dev/usb."
echo -n "COM Port: "
read COMPort
if [ $COMPort = "/dev/usb" ]
then
echo $COMPort > $INSTALL_PATH/INSTALL.TMP
elif [ $COMPort ]
then
exist=`/bin/ls $COMPort 2> /dev/null | grep $COMPort`
if [ $exist ]
then
echo $COMPort > $INSTALL_PATH/INSTALL.TMP
else
echo
echo $COMPort": Invalid device!"
echo "Installation failed!"
exit
fi
else
echo
echo "Invalid input!"
echo "Installation failed!"
exit
fi
}
set_Master_IP()
{
echo
echo "Please enter the IP address of the master "
echo "which this computer will connect to."
echo -n "IP address is : "
read Master_IP
if [ $Master_IP ]
then
echo $Master_IP >> $INSTALL_PATH/PRO_NET.DAT
else
echo "Invalid input!"
echo "Installation failed!"
exit
fi
}
set_Master_Slave()
{
echo
echo "Please select the communication mode."
echo "1. Master:"
echo " If this computer connects to an UPS directly(RS232 or USB)"
echo " and will administrate the UPS."
echo "2. Serial Slave:"
echo " If this computer connects to an UPS directly(RS232 or USB)"
echo " but will only monitor the UPS."
echo "3. Networking Slave:"
echo " If this computer powered by an UPS but doesn't communicate"
echo " with the UPS directly."
echo -n "Please enter '1' for Master, '2' for Serial Slave or '3' for Networking Slave: "
read Master
if [ $Master ]
then
if [ $Master = "1" ]
then
rm $INSTALL_PATH/PRO_NET.DAT 2> /dev/null
echo "1" > $INSTALL_PATH/PRO_NET.DAT
echo "2710" >> $INSTALL_PATH/PRO_NET.DAT
echo >> $INSTALL_PATH/PRO_NET.DAT
set_COMPort
elif [ $Master = "2" ]
then
rm $INSTALL_PATH/PRO_NET.DAT 2> /dev/null
echo "2" > $INSTALL_PATH/PRO_NET.DAT
echo "2710" >> $INSTALL_PATH/PRO_NET.DAT
echo >> $INSTALL_PATH/PRO_NET.DAT
set_COMPort
elif [ $Master = "3" ]
then
rm $INSTALL_PATH/PRO_NET.DAT 2> /dev/null
echo "0" > $INSTALL_PATH/PRO_NET.DAT
echo "2710" >> $INSTALL_PATH/PRO_NET.DAT
set_Master_IP
else
echo "Invalid input!"
echo "Installation failed!"
exit
fi
else
echo "Invalid input!"
echo "Installation failed!"
exit
fi
}
start_upsd()
{
echo -n "Do you want to start upsd now ?[y|n] "
read start
if [ $start = "y" ]
then
echo
echo -n "Starting upsd ... "
$INSTALL_PATH/upsd 2>/dev/null
echo "done"
echo
fi
}
install()
{
disp_title
echo "*** Installation for Linux ***"
echo
echo "The default destination directory is" /usr/local/bulldog "."
echo "Enter your new destination directory below, "
echo "or just press 'Enter' key for default."
echo -n "New destination directory: "
read newpath
if [ "$newpath" = "" ]
then
INSTALL_PATH="/usr/local/bulldog"
else
INSTALL_PATH=$newpath
fi
if [ ! -d $INSTALL_PATH ]
then
mkdir -p $INSTALL_PATH
fi
chmod u+wrx,go+rx-w $INSTALL_PATH
echo $INSTALL_PATH > /etc/upsd.path
set_Master_Slave
echo
echo -n "Copying files ."
/bin/cp ./monitor $INSTALL_PATH
delay
/bin/cp ./upsd $INSTALL_PATH
delay
/bin/cp ./configure $INSTALL_PATH
delay
# /bin/cp ./S99bulldog $INSTALL_PATH
# delay
# /bin/ln -s $INSTALL_PATH/S99bulldog /etc/rc.d/rc3.d 2>/dev/null
# delay
# /bin/ln -s $INSTALL_PATH/S99bulldog /etc/rc.d/rc5.d 2>/dev/null
# delay
# /bin/cp ./uninstall $INSTALL_PATH
# delay
/bin/cp ./Command.Shutdown $INSTALL_PATH
delay
/bin/cp ./Command.Mail $INSTALL_PATH
delay
# /bin/cp ./Command.Wall $INSTALL_PATH
# delay
/bin/cp ./Command.Write $INSTALL_PATH
delay
# /bin/cp ./check $INSTALL_PATH
# delay
/bin/cp ./libupshttp.so /usr/lib
delay
if [ ! -d $INSTALL_PATH/WWWRoot ]
then
mkdir -p $INSTALL_PATH/WWWRoot
fi
chmod u+wrx,go+rx-w $INSTALL_PATH/WWWRoot
/bin/cp ./WWWRoot/* $INSTALL_PATH/WWWRoot
chmod u+wr-x,go+r-wx $INSTALL_PATH/WWWRoot/*
delay
if [ ! -d $INSTALL_PATH/icons ]
then
mkdir -p $INSTALL_PATH/icons
fi
chmod u+wrx,go+rx-w $INSTALL_PATH/icons
/bin/cp ./icons/* $INSTALL_PATH/icons
chmod u+wr-x,go+r-wx $INSTALL_PATH/icons/*
delay
if [ ! -d $INSTALL_PATH/help ]
then
mkdir -p $INSTALL_PATH/help
fi
chmod u+wrx,go+rx-w $INSTALL_PATH/help
/bin/cp ./help/* $INSTALL_PATH/help
chmod u+wr-x,go+r-wx $INSTALL_PATH/help/*
delay
chmod u+wrx,go-wrx $INSTALL_PATH/monitor
delay
chmod u+wrx,go-wrx $INSTALL_PATH/upsd
delay
chmod u+wrx,go-wrx $INSTALL_PATH/configure
delay
chmod u+wrx,go-wrx $INSTALL_PATH/uninstall
delay
# chmod u+wrx,go-wrx $INSTALL_PATH/S99bulldog
# delay
chmod u+wrx,go-wrx $INSTALL_PATH/Command.Shutdown
delay
chmod u+wrx,go-wrx $INSTALL_PATH/Command.Mail
delay
# chmod u+wrx,go-wrx $INSTALL_PATH/Command.Wall
# delay
chmod u+wrx,go-wrx $INSTALL_PATH/Command.Write
delay
# chmod u+wrx,go-wrx $INSTALL_PATH/check
# delay
chmod u+wrx,go-wrx /usr/lib/libupshttp.so
delay
echo
./chkpas $INSTALL_PATH
echo
echo
echo "Installation complete."
echo
echo "Programs have been installed in the $INSTALL_PATH."
echo
}
disp_menu()
{
echo "*** Installation for Linux ***"
echo
echo -n "Do you want to install the Belkin Bulldog Plus now ?[y|n] "
read answer
if [ $answer = "y" ]
then
install
else
echo "Bye !"
exit
fi
}
clear_files()
{
rm -f ./Command.Mail
rm -f ./Command.Write
# rm -f ./Command.Wall
rm -f ./Command.Shutdown
rm -f ./check
rm -f ./S99bulldog
rm -f ./install
rm -f ./uninstall
rm -rf ./WWWRoot
rm -rf ./icons
rm -rf ./help
rm -f ./upsd
rm -f ./monitor
rm -f ./configure
rm -f ./chkpas
rm -f ./libupshttp.so
}
#######################################
# main loop
#######################################
check_user
check_exist
disp_title
disp_menu
temp="path=$INSTALL_PATH"
ed - S99bulldog <<! > /dev/null
/path
a
$temp
.
1;
/path
d
w
q
!
/bin/cp ./S99bulldog $INSTALL_PATH
chmod u+wrx,go-wrx $INSTALL_PATH/S99bulldog
/bin/ln -s $INSTALL_PATH/S99bulldog /etc/rc.d/rc3.d 2>/dev/null
/bin/ln -s $INSTALL_PATH/S99bulldog /etc/rc.d/rc5.d 2>/dev/null
#Change uninstall path
ed - uninstall <<! > /dev/null
/path
a
$temp
.
1;
/path
d
w
q
!
/bin/cp ./uninstall $INSTALL_PATH
chmod u+wrx,go-wrx $INSTALL_PATH/uninstall
#Change check path
ed - check <<! > /dev/null
/path
a
$temp
.
1;
/path
d
w
q
!
/bin/cp ./check $INSTALL_PATH
chmod u+wrx,go-wrx $INSTALL_PATH/check
start_upsd
clear_files
Adv Reply
Bookmarks