Hello all,

Asus ROG Strix X570-I
G-Skill Trident Z Neo DDR4 3600 32GB
Ryzen 3400G
Ubuntu 20.04 LTS

I'm not sure if this is the best place for this but there are some helpful people here so I will give it a go! Basically my computer won't boot when the RAM is clocked at anything over 2400MHz, If I go above this it will very briefly load the login screen before either abruptly changing to a green screen, or less frequently the login screen will just go all crazy (you know the sort of crazy I mean).

The limiting hardware is the Ryzen 3400G which only supports memory speeds up to 2933MHz, both the motherboard and the RAM modules support at least 3600MHz (or MT/s, whatever). I have enabled the only DOCP memory profile which is 3600MHz, and then manually set the memory frequency to 2966MHz or less, I have also tried manually setting the memory frequency and voltage. In either scenario I cannot successfully boot with the memory frequency set to more than 2400MHz. I also updated my firmware as the version that came with the board was a few versions old.

If anyone more knowledgeable has any suggestions they would be appreciated!