Results 1 to 7 of 7

Thread: connectivity issues with dlink dwa 131 wifi adapter

  1. #1
    Join Date
    Mar 2020
    Beans
    4

    Post connectivity issues with dlink dwa 131 wifi adapter

    i'm facing problems with dwa 131 wifi adapter.it was working fine until last reboot. i have gone through many threads regarding the same. most often i'm getting error with the commands they have given. i'm new to linux btw. also when i try to update through terminal, it says the given package doesnot have release note and so on.

    i'm listing the return values of some commands.

    $ lsusb
    Bus 001 Device 004: ID 2001:3319 D-Link Corp.
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    $ dmesg | grep -i rtl
    [ 1.189142] r8169 0000:01:00.0 eth0: RTL8168d/8111d at 0x (ptrval), bc:ae:c5:55:37:27, XID 083000c0 IRQ 24
    [ 13.171263] usbcore: registered new interface driver rtl8192cu
    [ 14.853439] usb 1-8: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
    [ 14.853618] usb 1-8: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
    [ 14.853621] usb 1-8: RTL8192EU MAC: 0c:b6:d2:d0:df:08
    [ 14.853625] usb 1-8: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
    [ 15.979276] usbcore: registered new interface driver rtl8xxxu
    [ 16.494875] usbcore: registered new interface driver rtl8192eu
    [ 16.508418] rtl8xxxu 1-8:1.0 wlx0cb6d2d0df08: renamed from wlan0
    [ 23.304427] usb 1-8: rtl8xxxu_bss_info_changed: HT supported
    [ 7575.422342] usb 1-8: rtl8192eu_active_to_emu: Disabling MAC timed out
    [ 7577.377951] usb 1-7: rtl8192eu_parse_efuse: dumping efuse (0x200 bytes):
    [ 7577.378086] usb 1-7: RTL8192EU rev B (SMIC) 2T2R, TX queues 3, WiFi=1, BT=0, GPS=0, HI PA=0
    [ 7577.378089] usb 1-7: RTL8192EU MAC: 0c:b6:d2:d0:df:08
    [ 7577.378091] usb 1-7: rtl8xxxu: Loading firmware rtlwifi/rtl8192eu_nic.bin
    [ 7578.883365] rtl8xxxu 1-7:1.0 wlx0cb6d2d0df08: renamed from wlan0
    [ 7583.017079] usb 1-7: rtl8xxxu_bss_info_changed: HT supported


    $ rfkill list all
    1: phy1: Wireless LAN
    Soft blocked: no
    Hard blocked: no

  2. #2
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    26,047
    Distro
    Ubuntu Development Release

    Re: connectivity issues with dlink dwa 131 wifi adapter

    We don't see anything alarming and fixable there. Let's dig deeper. Please post the result of:

    Code:
    dmesg | grep wlx
    nmcli device wifi list
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.

  3. #3
    Join Date
    Mar 2020
    Beans
    4

    Re: connectivity issues with dlink dwa 131 wifi adapter

    dmesg | grep wlx
    [ 16.508418] rtl8xxxu 1-8:1.0 wlx0cb6d2d0df08: renamed from wlan0
    [ 21.919606] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 21.941151] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 22.064801] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 23.280154] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 23.292594] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 23.294331] wlx0cb6d2d0df08: authenticated
    [ 23.296230] wlx0cb6d2d0df08: associate with 50:d4:f7:24:8e:34 (try 1/3)
    [ 23.302715] wlx0cb6d2d0df08: RX AssocResp from 50:d4:f7:24:8e:34 (capab=0x1411 status=0 aid=1)
    [ 23.306058] wlx0cb6d2d0df08: associated
    [ 23.620691] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0cb6d2d0df08: link becomes ready
    [ 244.921568] wlx0cb6d2d0df08: deauthenticating from 50:d4:f7:24:8e:34 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 346.302627] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 346.359996] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 347.579037] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 347.590715] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 347.794662] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 347.998682] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 348.202683] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 349.487379] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 349.510946] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 349.714696] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 349.918713] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 350.122720] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 351.803400] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 351.827575] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 352.030774] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 352.234770] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 352.438780] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 354.623633] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 354.647949] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 354.850851] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 355.054835] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 355.258852] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 365.443427] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 365.455205] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 365.659121] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 365.863132] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 366.067121] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 373.062859] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 374.266652] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 374.278459] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 374.479321] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 374.683326] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 374.887338] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 386.080220] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 386.103317] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 386.303616] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 386.507632] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 386.711633] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 399.056489] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 400.269296] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 400.281097] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 400.483966] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 400.687970] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 400.891978] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 412.077083] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 412.101465] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 412.304250] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 412.508271] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 412.712270] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 425.059044] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 426.266066] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 426.277849] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 426.480609] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 426.684619] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 426.888620] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 438.073686] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 438.097725] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 438.300893] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 438.504911] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 438.708902] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 451.058264] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 510.827444] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 510.851868] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 511.054704] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 511.258722] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 511.462717] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 522.647652] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 522.672362] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 522.875026] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 523.079028] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 523.283004] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 535.059022] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 7578.883365] rtl8xxxu 1-7:1.0 wlx0cb6d2d0df08: renamed from wlan0
    [ 7579.208778] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 7581.752734] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 7581.791968] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 7582.993518] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 7583.005249] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 7583.007001] wlx0cb6d2d0df08: authenticated
    [ 7583.011203] wlx0cb6d2d0df08: associate with 50:d4:f7:24:8e:34 (try 1/3)
    [ 7583.014972] wlx0cb6d2d0df08: RX AssocResp from 50:d4:f7:24:8e:34 (capab=0x1411 status=0 aid=2)
    [ 7583.019092] wlx0cb6d2d0df08: associated
    [ 7583.040411] IPv6: ADDRCONF(NETDEV_CHANGE): wlx0cb6d2d0df08: link becomes ready
    [ 8492.207172] wlx0cb6d2d0df08: deauthenticating from 50:d4:f7:24:8e:34 by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 8495.222044] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 8495.267728] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 8496.472669] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8496.484505] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8496.687831] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8496.891841] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8497.095828] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 8498.384492] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8498.408883] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8498.611814] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8498.815822] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8499.019813] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 8500.716487] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8500.740145] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8500.943852] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8501.147846] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8501.351821] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 8503.536467] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8503.560257] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8503.763821] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8503.967817] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8504.171802] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 8514.357752] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8514.369632] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8514.571796] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8514.775800] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8514.979790] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 8522.067131] IPv6: ADDRCONF(NETDEV_UP): wlx0cb6d2d0df08: link is not ready
    [ 8523.282759] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8523.296119] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8523.499733] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8523.703767] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8523.907769] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out
    [ 8535.088416] wlx0cb6d2d0df08: authenticate with 50:d4:f7:24:8e:34
    [ 8535.113145] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 1/3)
    [ 8535.315702] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 2/3)
    [ 8535.519709] wlx0cb6d2d0df08: send auth to 50:d4:f7:24:8e:34 (try 3/3)
    [ 8535.723708] wlx0cb6d2d0df08: authentication with 50:d4:f7:24:8e:34 timed out

    $ nmcli device wifi list
    IN-USE SSID MODE CHAN RATE SIGNAL BARS SECURITY
    Classified Infra 5 270 Mbit/s 17 ▂___ WPA1 WPA2


    it was working during the first thread(with very low signal reception), now it is not connecting.

  4. #4
    Join Date
    May 2013
    Location
    Galiza
    Beans
    4,009
    Distro
    Ubuntu

    Re: connectivity issues with dlink dwa 131 wifi adapter

    "WPA1 WPA2" is a problem in itself. WPA2 only is what should be. Please check the router settings.

  5. #5
    Join Date
    Mar 2020
    Beans
    4

    Re: connectivity issues with dlink dwa 131 wifi adapter

    i have corrected in router, but still same result

  6. #6
    Join Date
    Aug 2005
    Location
    South Carolina, USA
    Beans
    26,047
    Distro
    Ubuntu Development Release

    Re: connectivity issues with dlink dwa 131 wifi adapter

    First, check the settings in the router. WPA2-AES is preferred; not any WPA and WPA2 mixed mode and certainly not TKIP. Second, if your router is capable of N speeds, you may have better connectivity with a channel width of 20 MHz in the 2.4 GHz band instead of automatic 20/40 MHz, although it is likely to affect N speeds. I also have better luck with a fixed channel, either 1, 6 or 11, rather than automatic channel selection. Also, be certain the router is not set to use N speeds only; auto B, G and N is preferred. After making these changes, reboot the router.

    Then set your regulatory domain explicitly. Check yours:
    Code:
    sudo iw reg get
    If you get 00, that is a one-size-maybe-fits-all setting. Find yours here: http://en.wikipedia.org/wiki/ISO_3166-1_alpha-2 Then set it temporarily:
    Code:
    sudo iw reg set IS
    Of course, substitute your country code if not Iceland. Set it permanently:
    Code:
    sudo nano /etc/default/crda
    Change the last line to read:
    Code:
    REGDOMAIN=IS
    Proofread carefully, save (Ctrl+o followed by Enter) and close (Ctrl+x) the text editor.
    "Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.

  7. #7
    Join Date
    Mar 2020
    Beans
    4

    Re: connectivity issues with dlink dwa 131 wifi adapter

    reconfigured the router, and did everything as you said.

    sudo iw reg get
    global
    country IN: DFS-UNSET
    (2402 - 2482 @ 40), (N/A, 20), (N/A)
    (5150 - 5350 @ 160), (N/A, 23), (N/A)
    (5725 - 5875 @ 80), (N/A, 23), (N/A)

    thanks to you, its working now ! sorry for the late reply

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •