Results 1 to 10 of 16

Thread: Simplecom NW602 problems

Threaded View

  1. #1
    Join Date
    Feb 2008
    Location
    Land of fire and drought
    Beans
    Hidden!
    Distro
    Xubuntu

    Simplecom NW602 problems

    Hi all,

    Just purchased a Simplecom NW602 nano AC600 usb wifi adapter. Can't get it working. When I plug it in and issue dmesg in a terminal, I get this.

    Code:
    [ 2997.179845] usb 2-1.3: new high-speed USB device number 8 using ehci-pci
    [ 2997.273106] usb 2-1.3: New USB device found, idVendor=0bda, idProduct=c811
    [ 2997.273114] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 2997.273118] usb 2-1.3: Product: 802.11ac NIC
    [ 2997.273122] usb 2-1.3: Manufacturer: Realtek
    [ 2997.273125] usb 2-1.3: SerialNumber: 123456
    I followed some instructions from here ...

    https://forums.linuxmint.com/viewtopic.php?t=238399

    ... then realised these instructions were for the Simplecom NW611. Not my dongle. Now I'm a simpleton with a Simplecom!

    Any suggestions anyone? Hoping so else I'll need to fork out for the NW611 as at least I know that works (by the looks of it).

    Cheers.

    PS: I'm using Xubuntu-core 16.04.

    PPS: Further info. Just been screwing around with wireless.info script, and pretty sure this is the info for my Simplecom. The working dongle was not plugged in, only the Simplecom NW602, so ...


    Code:
    ########## wireless info START ##########
    
    Report from: 23 Dec 2019 15:54 ACDT +1030
    
    Booted last: 23 Dec 2019 00:00 ACDT +1030
    
    Script from: 22 Oct 2018 03:34 UTC +0000
    
    ##### release ###########################
    
    Distributor ID:	Ubuntu
    Description:	Ubuntu 16.04.6 LTS
    Release:	16.04
    Codename:	xenial
    
    ##### kernel ############################
    
    Linux 4.4.0-170-generic #199-Ubuntu SMP Thu Nov 14 01:45:04 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
    
    Parameters: ro, quiet, splash, vt.handoff=7
    
    ##### desktop ###########################
    
    Xubuntu
    
    ##### lspci #############################
    
    02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL810xE PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
    	Subsystem: Toshiba America Info Systems RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [1179:ff1e]
    	Kernel driver in use: r8169
    
    03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8172] (rev 10)
    	Subsystem: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller [10ec:8182]
    	Kernel modules: rtl8192se
    
    ##### lsusb #############################
    
    Bus 002 Device 003: ID 046d:c534 Logitech, Inc. Unifying Receiver
    Bus 002 Device 012: ID 0bda:c811 Realtek Semiconductor Corp. 
    Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 04f2:b128 Chicony Electronics Co., Ltd 
    Bus 001 Device 003: ID 0bda:0138 Realtek Semiconductor Corp. RTS5138 Card Reader Controller
    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    
    ##### PCMCIA card info ##################
    
    ##### rfkill ############################
    
    0: Toshiba Bluetooth: Bluetooth
    	Soft blocked: yes
    	Hard blocked: no
    
    ##### secure boot #######################
    
    'mokutil' is not installed (package "mokutil").
    
    ##### lsmod #############################
    
    rtl8812au            1355776  0
    rtl8192cu              98304  0
    rtl_usb                24576  1 rtl8192cu
    rtl8192c_common        81920  1 rtl8192cu
    rtlwifi               102400  3 rtl_usb,rtl8192c_common,rtl8192cu
    rtl8xxxu               73728  0
    mac80211              741376  4 rtl8xxxu,rtl_usb,rtlwifi,rtl8192cu
    cfg80211              565248  3 mac80211,rtlwifi,rtl8812au
    wmi                    20480  1 toshiba_acpi
    
    ##### interfaces ########################
    
    [/etc/network/interfaces]
    auto lo
    iface lo inet loopback
    
    ##### ifconfig ##########################
    
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
        link/loopback <MAC address> brd <MAC address>
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: enp2s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
        link/ether <MAC 'enp2s0' [IF1]> brd <MAC address>
    
    ##### iwconfig ##########################
    
    enp2s0    no wireless extensions.
    
    lo        no wireless extensions.
    
    ##### route #############################
    
    ##### resolv.conf #######################
    
    [644 root '/etc/resolv.conf']
    nameserver 127.0.1.1
    
    ##### network managers ##################
    
    Installed:
    
    	NetworkManager
    
    Running:
    
    root       887     1  0 12:34 ?        00:00:02 /usr/sbin/NetworkManager --no-daemon
    
    ##### NetworkManager info ###############
    
    GENERAL.DEVICE:                         enp2s0
    GENERAL.TYPE:                           ethernet
    GENERAL.NM-TYPE:                        NMDeviceEthernet
    GENERAL.VENDOR:                         Realtek Semiconductor Co., Ltd.
    GENERAL.PRODUCT:                        RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller
    GENERAL.DRIVER:                         r8169
    GENERAL.DRIVER-VERSION:                 2.3LK-NAPI
    GENERAL.FIRMWARE-VERSION:               
    GENERAL.HWADDR:                         <MAC 'enp2s0' [IF1]>
    GENERAL.MTU:                            1500
    GENERAL.STATE:                          20 (unavailable)
    GENERAL.REASON:                         2 (Device is now managed)
    GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.0/0000:02:00.0/net/enp2s0
    GENERAL.IP-IFACE:                       
    GENERAL.IS-SOFTWARE:                    no
    GENERAL.NM-MANAGED:                     yes
    GENERAL.AUTOCONNECT:                    yes
    GENERAL.FIRMWARE-MISSING:               no
    GENERAL.NM-PLUGIN-MISSING:              no
    GENERAL.PHYS-PORT-ID:                   --
    GENERAL.CONNECTION:                     --
    GENERAL.CON-UUID:                       --
    GENERAL.CON-PATH:                       --
    GENERAL.METERED:                        unknown
    CAPABILITIES.CARRIER-DETECT:            yes
    CAPABILITIES.SPEED:                     unknown
    CAPABILITIES.IS-SOFTWARE:               no
    WIRED-PROPERTIES.CARRIER:               off
    CONNECTIONS.AVAILABLE-CONNECTION-PATHS: 
    
    ##### NetworkManager.state ##############
    
    [main]
    NetworkingEnabled=true
    WirelessEnabled=true
    WWANEnabled=true
    
    ##### NetworkManager config #############
    
    [[/etc/NetworkManager/conf.d/default-wifi-powersave-on.conf]]
    [connection]
    wifi.powersave = 3
    
    [[/etc/NetworkManager/NetworkManager.conf]]
    [main]
    plugins=ifupdown,keyfile,ofono
    dns=dnsmasq
    [ifupdown]
    managed=false
    
    ##### NetworkManager profiles ###########
    
    [[/etc/NetworkManager/system-connections/Jetsons 1]] (600 root)
    [connection] id=Jetsons 1 | type=wifi | permissions=user:tish:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Jetsons
    [ipv4] method=manual
    [ipv6] method=auto
    
    [[/etc/NetworkManager/system-connections/TP-LINK_Extender_2.4GHz 1]] (600 root)
    [connection] id=TP-LINK_Extender_2.4GHz 1 | type=wifi | permissions=user:tish:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=TP-LINK_Extender_2.4GHz
    [ipv4] method=auto
    [ipv6] method=auto
    
    [[/etc/NetworkManager/system-connections/Orbitty]] (600 root)
    [connection] id=Orbitty | type=wifi | permissions=user:tish:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Orbitty
    [ipv4] method=auto
    [ipv6] method=auto
    
    [[/etc/NetworkManager/system-connections/TP-LINK_Extender_2.4GHz]] (600 root)
    [connection] id=TP-LINK_Extender_2.4GHz | type=wifi | permissions=user:tish:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=TP-LINK_Extender_2.4GHz
    [ipv4] method=auto
    [ipv6] method=auto
    
    [[/etc/NetworkManager/system-connections/Jetsons]] (600 root)
    [connection] id=Jetsons | type=wifi | permissions=user:xubuntu:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Jetsons
    [ipv4] method=auto
    [ipv6] method=auto
    
    [[/etc/NetworkManager/system-connections/Jetsons 2]] (600 root)
    [connection] id=Jetsons 2 | type=wifi | permissions=user:tish:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Jetsons
    [ipv4] method=auto
    [ipv6] method=auto
    
    [[/etc/NetworkManager/system-connections/Astro-2.4]] (600 root)
    [connection] id=Astro-2.4 | type=wifi | permissions=user:tish:;
    [wifi] mac-address=<MAC address> | mac-address-blacklist= | ssid=Astro-2.4
    [ipv4] method=auto
    [ipv6] method=auto
    
    ##### Netplan config ####################
    
    ##### iw reg get ########################
    
    Region: Australia/Adelaide (based on set time zone)
    
    country AU: DFS-ETSI
    	(2400 - 2483 @ 40), (N/A, 36), (N/A)
    	(5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR
    	(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS
    	(5470 - 5600 @ 80), (N/A, 27), (0 ms), DFS
    	(5650 - 5730 @ 80), (N/A, 27), (0 ms), DFS
    	(5730 - 5850 @ 80), (N/A, 36), (N/A)
    	(57000 - 66000 @ 2160), (N/A, 43), (N/A), NO-OUTDOOR
    
    ##### iwlist channels ###################
    
    enp2s0    no frequency information.
    
    lo        no frequency information.
    
    ##### iwlist scan #######################
    
    enp2s0    Interface doesn't support scanning.
    
    lo        Interface doesn't support scanning.
    
    ##### module infos ######################
    
    [rtl8812au]
    filename:       /lib/modules/4.4.0-170-generic/kernel/drivers/net/wireless/rtl8812au.ko
    version:        v4.3.14_13455.20150212_BTCOEX20150128-51
    author:         Realtek Semiconductor Corp.
    description:    Realtek Wireless Lan Driver
    license:        GPL
    srcversion:     2C63CE6EC735F21254D08B5
    depends:        cfg80211
    retpoline:      Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    parm:           rtw_ips_mode:The default IPS mode (int)
    parm:           rtw_usb_rxagg_mode:int
    parm:           rtw_qos_opt_enable:int
    parm:           ifname:The default name to allocate for first interface (charp)
    parm:           if2name:The default name to allocate for second interface (charp)
    parm:           rtw_initmac:charp
    parm:           rtw_channel_plan:int
    parm:           rtw_special_rf_path:int
    parm:           rtw_chip_version:int
    parm:           rtw_rfintfs:int
    parm:           rtw_lbkmode:int
    parm:           rtw_network_mode:int
    parm:           rtw_channel:int
    parm:           rtw_mp_mode:int
    parm:           rtw_wmm_enable:int
    parm:           rtw_vrtl_carrier_sense:int
    parm:           rtw_vcs_type:int
    parm:           rtw_busy_thresh:int
    parm:           rtw_ht_enable:int
    parm:           rtw_bw_mode:int
    parm:           rtw_ampdu_enable:int
    parm:           rtw_rx_stbc:int
    parm:           rtw_ampdu_amsdu:int
    parm:           rtw_vht_enable:int
    parm:           rtw_lowrate_two_xmit:int
    parm:           rtw_rf_config:int
    parm:           rtw_power_mgnt:int
    parm:           rtw_smart_ps:int
    parm:           rtw_low_power:int
    parm:           rtw_wifi_spec:int
    parm:           rtw_antdiv_cfg:int
    parm:           rtw_antdiv_type:int
    parm:           rtw_enusbss:int
    parm:           rtw_hwpdn_mode:int
    parm:           rtw_hwpwrp_detect:int
    parm:           rtw_hw_wps_pbc:int
    parm:           rtw_max_roaming_times:The max roaming times to try (uint)
    parm:           rtw_mc2u_disable:int
    parm:           rtw_80211d:Enable 802.11d mechanism (int)
    parm:           rtw_notch_filter:0:Disable, 1:Enable, 2:Enable only for P2P (uint)
    parm:           rtw_led_enable:Enable status LED (int)
    parm:           rtw_hiq_filter:0:allow all, 1:allow special, 2:deny all (uint)
    parm:           rtw_adaptivity_en:0:disable, 1:enable (uint)
    parm:           rtw_adaptivity_mode:0:normal, 1:carrier sense (uint)
    parm:           rtw_adaptivity_dml:0:disable, 1:enable (uint)
    parm:           rtw_amplifier_type_2g:BIT3:2G ext-PA, BIT4:2G ext-LNA (uint)
    parm:           rtw_amplifier_type_5g:BIT6:5G ext-PA, BIT7:5G ext-LNA (uint)
    parm:           rtw_RFE_type:default init value:64 (uint)
    parm:           rtw_TxBBSwing_2G:default init value:0xFF (uint)
    parm:           rtw_TxBBSwing_5G:default init value:0xFF (uint)
    parm:           rtw_OffEfuseMask:default open Efuse Mask vaule:0 (uint)
    parm:           rtw_FileMaskEfuse:default drv Mask Efuse vaule:0 (uint)
    parm:           rtw_tx_pwr_lmt_enable:0:Disable, 1:Enable, 2: Depend on efuse (int)
    parm:           rtw_tx_pwr_by_rate:0:Disable, 1:Enable, 2: Depend on efuse (int)
    parm:           rtw_phy_file_path:The path of phy parameter (charp)
    parm:           rtw_load_phy_file:PHY File Bit Map (int)
    parm:           rtw_decrypt_phy_file:Enable Decrypt PHY File (int)
    
    [rtl8192cu]
    filename:       /lib/modules/4.4.0-170-generic/updates/dkms/rtl8192cu.ko
    firmware:       rtlwifi/rtl8192cufw_TMSC.bin
    firmware:       rtlwifi/rtl8192cufw_B.bin
    firmware:       rtlwifi/rtl8192cufw_A.bin
    firmware:       rtlwifi/rtl8192cufw.bin
    description:    Realtek 8192C/8188C 802.11n USB wireless
    license:        GPL
    author:         Larry Finger	<Larry.Finger@lwfinger.net>
    author:         Ziv Huang	<ziv_huang@realtek.com>
    author:         Georgia		<georgia@realtek.com>
    srcversion:     C0496A1B9223D77A7FB126B
    depends:        mac80211,rtlwifi,rtl8192c-common,rtl_usb
    retpoline:      Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    parm:           swenc:Set to 1 for software crypto (default 0)
     (bool)
    parm:           debug:Set debug level (0-5) (default 0) (int)
    
    [rtl_usb]
    filename:       /lib/modules/4.4.0-170-generic/updates/dkms/rtl_usb.ko
    description:    USB basic driver for rtlwifi
    license:        GPL
    author:         Larry Finger	<Larry.FInger@lwfinger.net>
    author:         Realtek WlanFAE	<wlanfae@realtek.com>
    author:         lizhaoming	<chaoming_li@realsil.com.cn>
    srcversion:     65DF382D0422EF04172AA08
    depends:        mac80211,rtlwifi
    retpoline:      Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    
    [rtl8192c_common]
    filename:       /lib/modules/4.4.0-170-generic/updates/dkms/rtl8192c-common.ko
    description:    Realtek 8192C/8188C 802.11n PCI wireless
    license:        GPL
    author:         Larry Finger	<Larry.Finger@lwfinger.net>
    author:         Ziv Huang	<ziv_huang@realtek.com>
    author:         Georgia		<georgia@realtek.com>
    author:         Realtek WlanFAE	<wlanfae@realtek.com>
    author:         lizhaoming	<chaoming_li@realsil.com.cn>
    srcversion:     B0DEE3E51180D862FD88C2C
    depends:        rtlwifi
    retpoline:      Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    
    [rtlwifi]
    filename:       /lib/modules/4.4.0-170-generic/updates/dkms/rtlwifi.ko
    description:    Realtek 802.11n PCI wireless core
    license:        GPL
    author:         Larry Finger	<Larry.FInger@lwfinger.net>
    author:         Realtek WlanFAE	<wlanfae@realtek.com>
    author:         lizhaoming	<chaoming_li@realsil.com.cn>
    srcversion:     990116D31097F1C4C1F7006
    depends:        mac80211,cfg80211
    retpoline:      Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    
    [rtl8xxxu]
    filename:       /lib/modules/4.4.0-170-generic/kernel/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
    firmware:       rtlwifi/rtl8192cufw_TMSC.bin
    firmware:       rtlwifi/rtl8192cufw_B.bin
    firmware:       rtlwifi/rtl8192cufw_A.bin
    firmware:       rtlwifi/rtl8723aufw_B_NoBT.bin
    firmware:       rtlwifi/rtl8723aufw_B.bin
    firmware:       rtlwifi/rtl8723aufw_A.bin
    license:        GPL
    description:    RTL8XXXu USB mac80211 Wireless LAN Driver
    author:         Jes Sorensen <Jes.Sorensen@redhat.com>
    srcversion:     D48EF7138DE4C68FF5E8533
    depends:        mac80211
    retpoline:      Y
    intree:         Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    parm:           debug:Set debug mask (int)
    parm:           ht40_2g:Enable HT40 support on the 2.4GHz band (bool)
    
    [mac80211]
    filename:       /lib/modules/4.4.0-170-generic/kernel/net/mac80211/mac80211.ko
    license:        GPL
    description:    IEEE 802.11 subsystem
    srcversion:     5BE99ECBAF9A2B1F00A8A98
    depends:        cfg80211
    retpoline:      Y
    intree:         Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
    parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
    parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
    parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
    parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
    parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
    
    [cfg80211]
    filename:       /lib/modules/4.4.0-170-generic/kernel/net/wireless/cfg80211.ko
    description:    wireless configuration support
    license:        GPL
    author:         Johannes Berg
    srcversion:     C2B99D187C117AD7295AECA
    depends:        
    retpoline:      Y
    intree:         Y
    vermagic:       4.4.0-170-generic SMP mod_unload modversions 
    parm:           bss_entries_limit:limit to number of scan BSS entries (per wiphy, default 1000) (int)
    parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
    parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
    
    ##### module parameters #################
    
    [rtl8812au]
    if2name: wlan%d
    ifname: wlan%d
    rtw_80211d: 0
    rtw_adaptivity_dml: 0
    rtw_adaptivity_en: 0
    rtw_adaptivity_mode: 0
    rtw_ampdu_amsdu: 0
    rtw_ampdu_enable: 1
    rtw_amplifier_type_2g: 0
    rtw_amplifier_type_5g: 0
    rtw_antdiv_cfg: 2
    rtw_antdiv_type: 0
    rtw_busy_thresh: 40
    rtw_bw_mode: 33
    rtw_channel: 1
    rtw_channel_plan: 89
    rtw_chip_version: 0
    rtw_decrypt_phy_file: 0
    rtw_enusbss: 0
    rtw_FileMaskEfuse: 0
    rtw_hiq_filter: 1
    rtw_ht_enable: 1
    rtw_hwpdn_mode: 2
    rtw_hwpwrp_detect: 0
    rtw_hw_wps_pbc: 1
    rtw_initmac: (null)
    rtw_ips_mode: 1
    rtw_lbkmode: 0
    rtw_led_enable: 1
    rtw_load_phy_file: 68
    rtw_low_power: 0
    rtw_lowrate_two_xmit: 1
    rtw_max_roaming_times: 2
    rtw_mc2u_disable: 0
    rtw_mp_mode: 0
    rtw_network_mode: 0
    rtw_notch_filter: 0
    rtw_OffEfuseMask: 0
    rtw_power_mgnt: 1
    rtw_qos_opt_enable: 0
    rtw_rf_config: 5
    rtw_RFE_type: 64
    rtw_rfintfs: 2
    rtw_rx_stbc: 1
    rtw_smart_ps: 2
    rtw_special_rf_path: 0
    rtw_TxBBSwing_2G: 255
    rtw_TxBBSwing_5G: 255
    rtw_tx_pwr_by_rate: 0
    rtw_tx_pwr_lmt_enable: 0
    rtw_usb_rxagg_mode: 2
    rtw_vcs_type: 1
    rtw_vht_enable: 1
    rtw_vrtl_carrier_sense: 2
    rtw_wifi_spec: 0
    rtw_wmm_enable: 1
    
    [rtl8192cu]
    debug: 1
    swenc: N
    
    grep: /sys/module/rtl8xxxu/parameters/debug: Permission denied
    grep: /sys/module/rtl8xxxu/parameters/ht40_2g: Permission denied
    [rtl8xxxu]
    
    [mac80211]
    beacon_loss_count: 7
    ieee80211_default_rc_algo: minstrel_ht
    max_nullfunc_tries: 2
    max_probe_tries: 5
    minstrel_vht_only: Y
    probe_wait_ms: 500
    
    [cfg80211]
    bss_entries_limit: 1000
    cfg80211_disable_40mhz_24ghz: N
    ieee80211_regdom: 00
    
    ##### /etc/modules ######################
    
    ##### modprobe options ##################
    
    [/etc/modprobe.d/amd64-microcode-blacklist.conf]
    blacklist microcode
    
    [/etc/modprobe.d/blacklist-ath_pci.conf]
    blacklist ath_pci
    
    [/etc/modprobe.d/blacklist.conf]
    blacklist evbug
    blacklist usbmouse
    blacklist usbkbd
    blacklist eepro100
    blacklist de4x5
    blacklist eth1394
    blacklist snd_intel8x0m
    blacklist snd_aw2
    blacklist i2c_i801
    blacklist prism54
    blacklist bcm43xx
    blacklist garmin_gps
    blacklist asus_acpi
    blacklist snd_pcsp
    blacklist pcspkr
    blacklist amd76x_edac
    blacklist rtl8192ce
    blacklist rtl8192se
    
    [/etc/modprobe.d/blacklist-rare-network.conf]
    alias net-pf-3 off
    alias net-pf-6 off
    alias net-pf-9 off
    alias net-pf-11 off
    alias net-pf-12 off
    alias net-pf-19 off
    alias net-pf-21 off
    alias net-pf-36 off
    
    [/etc/modprobe.d/intel-microcode-blacklist.conf]
    blacklist microcode
    
    [/etc/modprobe.d/iwlwifi.conf]
    remove iwlwifi \
    (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
    && /sbin/modprobe -r mac80211
    
    [/etc/modprobe.d/mlx4.conf]
    softdep mlx4_core post: mlx4_en
    
    [/etc/modprobe.d/rtl8192se.conf]
    options rtl8192se swenc=1 ips=0
    
    ##### rc.local ##########################
    
    sleep 10
    iwconfig wlp3s0 power off
    exit 0
    
    ##### pm-utils ##########################
    
    [/etc/pm/power.d/wireless] (755 root)
    /sbin/iwconfig wlp3s0 power off
    
    ##### udev rules ########################
    
    ##### dmesg #############################
    
    [ 4229.478559] wlxe84e060dc5a4: authenticated
    [ 4229.479690] wlxe84e060dc5a4: associate with <MAC address> (try 1/3)
    [ 4229.483317] wlxe84e060dc5a4: RX AssocResp from <MAC address> (capab=0x1431 status=0 aid=3)
    [ 4229.485548] usb 2-1.3: rtl8xxxu_bss_info_changed: HT supported
    [ 4229.488690] wlxe84e060dc5a4: associated
    [ 4229.488734] usb 2-1.3: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
    [ 4229.488798] IPv6: ADDRCONF(NETDEV_CHANGE): wlxe84e060dc5a4: link becomes ready
    [ 4566.325191] usb 2-1.3: rtl8xxxu_int_complete: Error -71
    [ 4566.535600] usb 2-1.3: rtl8xxxu_active_to_lps: RX poll timed out (0x05f8)
    [ 4566.540917] usb 2-1.3: rtl8xxxu_active_to_emu: Disabling MAC timed out
    [ 4566.552502] wlxe84e060dc5a4: deauthenticating from <MAC address> by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 4566.552525] usb 2-1.3: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_STOP
    [ 4778.171599] usb 2-1.3: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
    [ 4779.772827] rtl8xxxu 2-1.3:1.0 wlxe84e060dc5a4: renamed from wlan0
    [ 4779.801593] IPv6: ADDRCONF(NETDEV_UP): wlxe84e060dc5a4: link is not ready (repeated 3 times)
    [ 4781.683300] wlxe84e060dc5a4: authenticate with <MAC address>
    [ 4781.699341] wlxe84e060dc5a4: send auth to <MAC address> (try 1/3)
    [ 4781.700944] wlxe84e060dc5a4: authenticated
    [ 4781.702110] wlxe84e060dc5a4: associate with <MAC address> (try 1/3)
    [ 4781.705666] wlxe84e060dc5a4: RX AssocResp from <MAC address> (capab=0x1431 status=0 aid=3)
    [ 4781.707870] usb 2-1.3: rtl8xxxu_bss_info_changed: HT supported
    [ 4781.710562] wlxe84e060dc5a4: associated
    [ 4781.710649] IPv6: ADDRCONF(NETDEV_CHANGE): wlxe84e060dc5a4: link becomes ready
    [ 4781.710935] usb 2-1.3: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_START
    [ 5173.467365] usb 2-1.3: rtl8xxxu_int_complete: Error -71
    [ 5173.478531] usb 2-1.3: rtl8xxxu_active_to_lps: RX poll timed out (0x05f8)
    [ 5173.483804] usb 2-1.3: rtl8xxxu_active_to_emu: Disabling MAC timed out
    [ 5173.499976] wlxe84e060dc5a4: deauthenticating from <MAC address> by local choice (Reason: 3=DEAUTH_LEAVING)
    [ 5173.500001] usb 2-1.3: rtl8xxxu_ampdu_action: IEEE80211_AMPDU_RX_STOP
    
    ########## wireless info END ############
    Last edited by Bucky Ball; December 23rd, 2019 at 06:30 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •