I have a HTPC running Ubuntu 18.04 with MythTV .29. My RC 6 ir remote control quite working after I installed libdvd.

Here is what comes up with dmesg:

[ 1.924043] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[ 2.004033] usb 1-1.2: device descriptor read/64, error -32
[ 2.191975] usb 1-1.2: device descriptor read/64, error -32
[ 2.300093] usb 1-1-port2: attempt power cycle
[ 2.904019] usb 1-1.2: new full-speed USB device number 5 using ehci-pci
[ 3.320036] usb 1-1.2: device not accepting address 5, error -32
[ 3.400031] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[ 3.816031] usb 1-1.2: device not accepting address 6, error -32
[ 3.816249] usb 1-1-port2: unable to enumerate USB device
[ 4.507971] usb 1-1.2: new full-speed USB device number 7 using ehci-pci
[ 4.587969] usb 1-1.2: device descriptor read/64, error -32
[ 5.103970] usb 1-1.2: new full-speed USB device number 8 using ehci-pci
[ 5.848031] usb 1-1.2: device descriptor read/64, error -32
[ 6.035972] usb 1-1.2: device descriptor read/64, error -32
[ 6.144056] usb 1-1-port2: attempt power cycle
[ 6.995971] usb 1-1.2: new full-speed USB device number 9 using ehci-pci
[ 7.411978] usb 1-1.2: device not accepting address 9, error -32
[ 7.491970] usb 1-1.2: new full-speed USB device number 10 using ehci-pci
[ 7.908031] usb 1-1.2: device not accepting address 10, error -32
[ 7.908249] usb 1-1-port2: unable to enumerate USB device
[ 8.131971] usb 1-1.2: new full-speed USB device number 11 using ehci-pci
[ 8.211973] usb 1-1.2: device descriptor read/64, error -32
[ 8.975970] usb 1-1.2: new high-speed USB device number 12 using ehci-pci
[ 9.068056] usb 1-1-port2: attempt power cycle
[ 10.603971] usb 1-1.2: new full-speed USB device number 14 using ehci-pci
[ 10.683969] usb 1-1.2: device descriptor read/64, error -32
[ 11.535969] usb 1-1.2: device descriptor read/64, error -32
[ 11.971970] usb 1-1.2: new high-speed USB device number 15 using ehci-pci
[ 12.064057] usb 1-1-port2: attempt power cycle
[ 12.668027] usb 1-1.2: new full-speed USB device number 16 using ehci-pci
[ 13.084026] usb 1-1.2: device not accepting address 16, error -32
[ 13.620027] usb 1-1.2: new full-speed USB device number 17 using ehci-pci
[ 14.036040] usb 1-1.2: device not accepting address 17, error -32
[ 14.036247] usb 1-1-port2: unable to enumerate USB device
[ 1471.809832] usb 1-1.1: new full-speed USB device number 18 using ehci-pci
[ 1471.889863] usb 1-1.1: device descriptor read/64, error -32
[ 1472.077834] usb 1-1.1: device descriptor read/64, error -32
[ 1472.265840] usb 1-1.1: new full-speed USB device number 19 using ehci-pci
[ 1472.345841] usb 1-1.1: device descriptor read/64, error -32
[ 1472.533808] usb 1-1.1: device descriptor read/64, error -32
[ 1472.641888] usb 1-1-port1: attempt power cycle
[ 1473.245874] usb 1-1.1: new full-speed USB device number 20 using ehci-pci
[ 1473.661880] usb 1-1.1: device not accepting address 20, error -32
[ 1473.741878] usb 1-1.1: new full-speed USB device number 21 using ehci-pci
[ 1474.157852] usb 1-1.1: device not accepting address 21, error -32
[ 1474.158037] usb 1-1-port1: unable to enumerate USB device

Has anyone else experienced this?