Code:I am trying to log into guest network at work. Wifi icon had no question mark but the captive portal page is not reachable. It seemed there's some communication established but Ubuntu just can't open the address. is there any information extracted from the http below that can be used to set network setting? Thanks for the help My work wifi returns and address for ubuntu to open as below: https://securelogin.amat.com/upload/...generate%5F204 it seems there's some setting included in the web address but I don't understand it. I am a new linux user. My ubuntu version is 18.04.3LTS My network setting is: enp0s31f6: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether 48:2a:e3:22:82:39 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device interrupt 16 memory 0xee300000-ee320000 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 944 bytes 96414 (96.4 KB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 944 bytes 96414 (96.4 KB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.105 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::fa5f:f019:8f4d:d4d4 prefixlen 64 scopeid 0x20<link> ether 98:3b:8f:31:89:a9 txqueuelen 1000 (Ethernet) RX packets 32376 bytes 28960359 (28.9 MB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 17199 bytes 4607132 (4.6 MB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Bookmarks