Results 1 to 2 of 2

Thread: 5GHz HOTSPOT CREATION NOT working on Ubuntu MATE 18.04.3. please help me

  1. #1
    Join Date
    Aug 2019
    Beans
    1

    Thumbs down 5GHz HOTSPOT CREATION NOT working on Ubuntu MATE 18.04.3. please help me

    my 5GHz HOTSPOT CREATION NOT working on Ubuntu MATE 18.04.3.

    * * * * * please help me in creating 5GHz hotspot on Ubuntu MATE 18.04.3. * * * * *

    Also please let me know if you need more logs or details for analysis.


    Other details/analysis:
    1) my network card details:- Intel Corporation Wireless-AC 9560
    2) my network card is working perfectly when connected as a wifi CLIENT on both 2.4Ghz & 5GHz
    3) I am ABLE to create HOTSPOT using 2.4GHz (with 72Mbps speed) WITHOUT any issues
    4) my network card works by default in Ubuntu MATE with bundled intel wifi drivers
    5) * * * * * I have attached my HOTSPOT NETWORK SCREENSHOT in attachment below * * * * *
    5GHz HOTSPOT.png

    please find the output of "iw list" command below


    https://paste.ubuntu.com/p/V8Y4s939dT/

    $ iw list

    Wiphy phy0
    max # scan SSIDs: 20
    max scan IEs length: 422 bytes
    max # sched scan SSIDs: 20
    max # match sets: 11
    max # scan plans: 2
    max scan plan interval: 65535
    max scan plan iterations: 254
    Retry short limit: 7
    Retry long limit: 4
    Coverage class: 0 (up to 0m)
    Device supports RSN-IBSS.
    Device supports AP-side u-APSD.
    Device supports T-DLS.
    Supported Ciphers:
    * WEP40 (00-0f-ac:1)
    * WEP104 (00-0f-ac:5)
    * TKIP (00-0f-ac:2)
    * CCMP-128 (00-0f-ac:4)
    * GCMP-128 (00-0f-ac:8)
    * GCMP-256 (00-0f-ac:9)
    * CMAC (00-0f-ac:6)
    * GMAC-128 (00-0f-ac:11)
    * GMAC-256 (00-0f-ac:12)
    Available Antennas: TX 0 RX 0
    Supported interface modes:
    * IBSS
    * managed
    * AP
    * AP/VLAN
    * monitor
    * P2P-client
    * P2P-GO
    * P2P-device
    Band 1:
    Capabilities: 0x19ef
    RX LDPC
    HT20/HT40
    SM Power Save disabled
    RX HT20 SGI
    RX HT40 SGI
    TX STBC
    RX STBC 1-stream
    Max AMSDU length: 7935 bytes
    DSSS/CCK HT40
    Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
    Minimum RX AMPDU time spacing: 4 usec (0x05)
    HT Max RX data rate: 300 Mbps
    HT TX/RX MCS rate indexes supported: 0-15
    Bitrates (non-HT):
    * 1.0 Mbps
    * 2.0 Mbps (short preamble supported)
    * 5.5 Mbps (short preamble supported)
    * 11.0 Mbps (short preamble supported)
    * 6.0 Mbps
    * 9.0 Mbps
    * 12.0 Mbps
    * 18.0 Mbps
    * 24.0 Mbps
    * 36.0 Mbps
    * 48.0 Mbps
    * 54.0 Mbps
    Frequencies:
    * 2412 MHz [1] (22.0 dBm)
    * 2417 MHz [2] (22.0 dBm)
    * 2422 MHz [3] (22.0 dBm)
    * 2427 MHz [4] (22.0 dBm)
    * 2432 MHz [5] (22.0 dBm)
    * 2437 MHz [6] (22.0 dBm)
    * 2442 MHz [7] (22.0 dBm)
    * 2447 MHz [8] (22.0 dBm)
    * 2452 MHz [9] (22.0 dBm)
    * 2457 MHz [10] (22.0 dBm)
    * 2462 MHz [11] (22.0 dBm)
    * 2467 MHz [12] (22.0 dBm)
    * 2472 MHz [13] (22.0 dBm)
    * 2484 MHz [14] (disabled)
    Band 2:
    Capabilities: 0x19ef
    RX LDPC
    HT20/HT40
    SM Power Save disabled
    RX HT20 SGI
    RX HT40 SGI
    TX STBC
    RX STBC 1-stream
    Max AMSDU length: 7935 bytes
    DSSS/CCK HT40
    Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
    Minimum RX AMPDU time spacing: 4 usec (0x05)
    HT Max RX data rate: 300 Mbps
    HT TX/RX MCS rate indexes supported: 0-15
    VHT Capabilities (0x039071f6):
    Max MPDU length: 11454
    Supported Channel Width: 160 MHz
    RX LDPC
    short GI (80 MHz)
    short GI (160/80+80 MHz)
    TX STBC
    SU Beamformee
    MU Beamformee
    VHT RX MCS set:
    1 streams: MCS 0-9
    2 streams: MCS 0-9
    3 streams: not supported
    4 streams: not supported
    5 streams: not supported
    6 streams: not supported
    7 streams: not supported
    8 streams: not supported
    VHT RX highest supported: 0 Mbps
    VHT TX MCS set:
    1 streams: MCS 0-9
    2 streams: MCS 0-9
    3 streams: not supported
    4 streams: not supported
    5 streams: not supported
    6 streams: not supported
    7 streams: not supported
    8 streams: not supported
    VHT TX highest supported: 0 Mbps
    Bitrates (non-HT):
    * 6.0 Mbps
    * 9.0 Mbps
    * 12.0 Mbps
    * 18.0 Mbps
    * 24.0 Mbps
    * 36.0 Mbps
    * 48.0 Mbps
    * 54.0 Mbps
    Frequencies:
    * 5180 MHz [36] (22.0 dBm) (no IR)
    * 5200 MHz [40] (22.0 dBm) (no IR)
    * 5220 MHz [44] (22.0 dBm) (no IR)
    * 5240 MHz [48] (22.0 dBm) (no IR)
    * 5260 MHz [52] (22.0 dBm) (no IR, radar detection)
    * 5280 MHz [56] (22.0 dBm) (no IR, radar detection)
    * 5300 MHz [60] (22.0 dBm) (no IR, radar detection)
    * 5320 MHz [64] (22.0 dBm) (no IR, radar detection)
    * 5340 MHz [68] (disabled)
    * 5360 MHz [72] (disabled)
    * 5380 MHz [76] (disabled)
    * 5400 MHz [80] (disabled)
    * 5420 MHz [84] (disabled)
    * 5440 MHz [88] (disabled)
    * 5460 MHz [92] (disabled)
    * 5480 MHz [96] (disabled)
    * 5500 MHz [100] (22.0 dBm) (no IR, radar detection)
    * 5520 MHz [104] (22.0 dBm) (no IR, radar detection)
    * 5540 MHz [108] (22.0 dBm) (no IR, radar detection)
    * 5560 MHz [112] (22.0 dBm) (no IR, radar detection)
    * 5580 MHz [116] (22.0 dBm) (no IR, radar detection)
    * 5600 MHz [120] (22.0 dBm) (no IR, radar detection)
    * 5620 MHz [124] (22.0 dBm) (no IR, radar detection)
    * 5640 MHz [128] (22.0 dBm) (no IR, radar detection)
    * 5660 MHz [132] (22.0 dBm) (no IR, radar detection)
    * 5680 MHz [136] (22.0 dBm) (no IR, radar detection)
    * 5700 MHz [140] (22.0 dBm) (no IR, radar detection)
    * 5720 MHz [144] (22.0 dBm) (no IR, radar detection)
    * 5745 MHz [149] (22.0 dBm) (no IR)
    * 5765 MHz [153] (22.0 dBm) (no IR)
    * 5785 MHz [157] (22.0 dBm) (no IR)
    * 5805 MHz [161] (22.0 dBm) (no IR)
    * 5825 MHz [165] (22.0 dBm) (no IR)
    * 5845 MHz [169] (disabled)
    * 5865 MHz [173] (disabled)
    * 5885 MHz [177] (disabled)
    * 5905 MHz [181] (disabled)
    Supported commands:
    * new_interface
    * set_interface
    * new_key
    * start_ap
    * new_station
    * new_mpath
    * set_mesh_config
    * set_bss
    * authenticate
    * associate
    * deauthenticate
    * disassociate
    * join_ibss
    * join_mesh
    * remain_on_channel
    * set_tx_bitrate_mask
    * frame
    * frame_wait_cancel
    * set_wiphy_netns
    * set_channel
    * set_wds_peer
    * tdls_mgmt
    * tdls_oper
    * start_sched_scan
    * probe_client
    * set_noack_map
    * register_beacons
    * start_p2p_device
    * set_mcast_rate
    * connect
    * disconnect
    * channel_switch
    * set_qos_map
    * add_tx_ts
    * set_multicast_to_unicast
    Supported TX frame types:
    * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
    Supported RX frame types:
    * IBSS: 0x40 0xb0 0xc0 0xd0
    * managed: 0x40 0xd0
    * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
    * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
    * mesh point: 0xb0 0xc0 0xd0
    * P2P-client: 0x40 0xd0
    * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
    * P2P-device: 0x40 0xd0
    WoWLAN support:
    * wake up on disconnect
    * wake up on magic packet
    * wake up on pattern match, up to 20 patterns of 16-128 bytes,
    maximum packet offset 0 bytes
    * can do GTK rekeying
    * wake up on GTK rekey failure
    * wake up on EAP identity request
    * wake up on 4-way handshake
    * wake up on rfkill release
    * wake up on network detection, up to 11 match sets
    * wake up on TCP connection
    software interface modes (can always be added):
    * AP/VLAN
    * monitor
    valid interface combinations:
    * #{ managed } <= 1, #{ AP, P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
    total <= 3, #channels <= 2
    HT Capability overrides:
    * MCS: ff ff ff ff ff ff ff ff ff ff
    * maximum A-MSDU length
    * supported channel width
    * short GI for 40 MHz
    * max A-MPDU length exponent
    * min MPDU start spacing
    Device supports TX status socket option.
    Device supports HT-IBSS.
    Device supports SAE with AUTHENTICATE command
    Device supports low priority scan.
    Device supports scan flush.
    Device supports per-vif TX power setting
    P2P GO supports CT window setting
    P2P GO supports opportunistic powersave setting
    Driver supports full state transitions for AP/GO clients
    Driver supports a userspace MPM
    Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
    Device adds DS IE to probe requests
    Device can update TPC Report IE
    Device supports static SMPS
    Device supports dynamic SMPS
    Device supports WMM-AC admission (TSPECs)
    Device supports configuring vdev MAC-addr on create.
    Device supports TDLS channel switching
    Last edited by fastestteleport; 2 Days Ago at 10:55 AM. Reason: output of the command "iw list" is pasted / appended

  2. #2
    Join Date
    Aug 2017
    Location
    melbourne, au
    Beans
    39
    Distro
    Lubuntu Development Release

    Re: 5GHz HOTSPOT CREATION NOT working on Ubuntu MATE 18.04.3. please help me


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •