Hi community!
Recently installed ubuntu on a desktop PC and noticed a message at boot time:
No irq handler for vector
I've followed directions on this thread without any luck
The problem is very random, say 1 / 5 times it will freeze after launching the browser or playing a movie, on a screen as the following:
Any help would be highly appreciated!
hints, asrock motherboard, integrated graphics
Hi community!
Recently installed ubuntu on a desktop PC and noticed a message at boot time:
No irq handler for vector
I've followed directions on this thread without any luck
The problem is very random, say 1 / 5 times it will freeze after launching the browser or playing a movie, on a screen as the following:
Any help would be highly appreciated!
hints, asrock motherboard, integrated graphics
A lightdm service restart sometimes fixes the issue temporary.
dmesg output:
[ 0.000000] Linux version 4.15.0-51-generic (buildd@lgw01-amd64-059) (gcc version 7.3.0 (Ubuntu 7.3.0-16ubuntu3)) #55-Ubuntu SMP Wed May 15 14:27:21 UTC 2019 (Ubuntu 4.15.0-51.55-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-51-generic root=UUID=59c62809-784f-4409-b7c2-c1171d3e9e44 ro quiet splash pci=nomsi,noaer
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bffa0000-0x00000000bffaffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bffb0000-0x00000000bffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bffe0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001afffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./N68-VS3 FX, BIOS P1.80 10/31/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x1b0000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 00000001b0000000 aka 6912M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 99000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1ab3f000, 0x1ab3ffff] PGTABLE
[ 0.000000] BRK [0x1ab40000, 0x1ab40fff] PGTABLE
[ 0.000000] BRK [0x1ab41000, 0x1ab41fff] PGTABLE
[ 0.000000] BRK [0x1ab42000, 0x1ab42fff] PGTABLE
[ 0.000000] BRK [0x1ab43000, 0x1ab43fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x30c87000-0x3463afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F9E10 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x00000000BFFA0000 00003C (v01 103112 RSDT1040 20121031 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000BFFA0200 000084 (v01 A_M_I OEMFACP 12000601 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000BFFA0470 004CAE (v01 AS569 AS569171 00000171 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BFFB0000 000040
[ 0.000000] ACPI: APIC 0x00000000BFFA0390 0000A0 (v01 103112 APIC1040 20121031 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000BFFA0430 00003C (v01 103112 OEMMCFG 20121031 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000BFFB0040 000072 (v01 103112 OEMB1040 20121031 MSFT 00000097)
[ 0.000000] ACPI: AAFT 0x00000000BFFAA470 000027 (v01 103112 OEMAAFT 20121031 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x00000000BFFAA4A0 000470 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001afffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1affd3000-0x1afffdfff]
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001afffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bff9ffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001afffffff]
[ 0.000000] Reserved but unavailable: 194 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001afffffff]
[ 0.000000] On node 0 totalpages: 1507134
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12223 pages used for memmap
[ 0.000000] DMA32 zone: 782240 pages, LIFO batch:31
[ 0.000000] Normal zone: 11264 pages used for memmap
[ 0.000000] Normal zone: 720896 pages, LIFO batch:31
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffa0000-0xbffaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffb0000-0xbffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbffe0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1483562
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-51-generic root=UUID=59c62809-784f-4409-b7c2-c1171d3e9e44 ro quiet splash pci=nomsi,noaer
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[ 0.000000] AGP: Your BIOS doesn't leave an aperture memory hole
[ 0.000000] AGP: Please enable the IOMMU option in the BIOS setup
[ 0.000000] AGP: This costs you 64MB of RAM
[ 0.000000] AGP: Mapping aperture over RAM [mem 0xb4000000-0xb7ffffff] (65536KB)
[ 0.000000] PM: Registered nosave memory: [mem 0xb4000000-0xb7ffffff]
[ 0.000000] Memory: 5714008K/6028536K available (12300K kernel code, 2473K rwdata, 4272K rodata, 2408K init, 2416K bss, 314528K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 39215 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.000000] do_IRQ: 0.55 No irq handler for vector
[ 0.020000] tsc: Fast TSC calibration using PIT
[ 0.024000] tsc: Detected 3415.453 MHz processor
[ 0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6830.90 BogoMIPS (lpj=13661812)
[ 0.024000] pid_max: default: 32768 minimum: 301
[ 0.024000] Security Framework initialized
[ 0.024000] Yama: becoming mindful.
[ 0.024000] AppArmor: AppArmor initialized
[ 0.029175] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030668] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.030734] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.030782] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.031022] mce: CPU supports 6 MCE banks
[ 0.031027] LVT offset 0 assigned for vector 0xf9
[ 0.031031] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
[ 0.031032] Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
[ 0.031034] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.031034] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.031151] Freeing SMP alternatives memory: 36K
[ 0.036000] smpboot: CPU0: AMD Athlon(tm) II X2 270 Processor (family: 0x10, model: 0x6, stepping: 0x3)
[ 0.036000] Performance Events: AMD PMU driver.
[ 0.036000] ... version: 0
[ 0.036000] ... bit width: 48
[ 0.036000] ... generic registers: 4
[ 0.036000] ... value mask: 0000ffffffffffff
[ 0.036000] ... max period: 00007fffffffffff
[ 0.036000] ... fixed-purpose events: 0
[ 0.036000] ... event mask: 000000000000000f
[ 0.036000] Hierarchical SRCU implementation.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.036000] smp: Brought up 1 node, 2 CPUs
[ 0.036000] smpboot: Max logical packages: 4
[ 0.036000] smpboot: Total of 2 processors activated (13661.81 BogoMIPS)
[ 0.036000] devtmpfs: initialized
[ 0.036000] x86/mm: Memory block size: 128MB
[ 0.036000] evm: security.selinux
[ 0.036000] evm: security.SMACK64
[ 0.036000] evm: security.SMACK64EXEC
[ 0.036000] evm: security.SMACK64TRANSMUTE
[ 0.036000] evm: security.SMACK64MMAP
[ 0.036000] evm: security.apparmor
[ 0.036000] evm: security.ima
[ 0.036000] evm: security.capability
[ 0.036029] PM: Registering ACPI NVS region [mem 0xbffb0000-0xbffdffff] (196608 bytes)
[ 0.036088] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.036088] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.036092] pinctrl core: initialized pinctrl subsystem
[ 0.036190] RTC time: 23:32:26, date: 06/06/19
[ 0.036296] NET: Registered protocol family 16
[ 0.036369] audit: initializing netlink subsys (disabled)
[ 0.036381] audit: type=2000 audit(1559863946.036:1): state=initialized audit_enabled=0 res=1
[ 0.036381] cpuidle: using governor ladder
[ 0.036381] cpuidle: using governor menu
[ 0.036381] node 0 link 0: io port [1000, ffffff]
[ 0.036381] TOM: 00000000d0000000 aka 3328M
[ 0.036381] node 0 link 0: mmio [f0000000, f7ffffff]
[ 0.036381] node 0 link 0: mmio [d0000000, efffffff]
[ 0.036381] node 0 link 0: mmio [f8000000, fe0bffff]
[ 0.036381] node 0 link 0: mmio [a0000, bffff]
[ 0.036381] TOM2: 00000001b0000000 aka 6912M
[ 0.036381] bus: [bus 00-1f] on node 0 link 0
[ 0.036381] bus: 00 [io 0x0000-0xffff]
[ 0.036381] bus: 00 [mem 0xd0000000-0xffffffff]
[ 0.036381] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.036381] bus: 00 [mem 0x1b0000000-0xfcffffffff]
[ 0.036381] ACPI: bus type PCI registered
[ 0.036381] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.036381] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.036381] PCI: not using MMCONFIG
[ 0.036381] PCI: Using configuration type 1 for base access
[ 0.036381] PCI: Using configuration type 1 for extended access
[ 0.036381] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.036381] mtrr: probably your BIOS does not setup all CPUs.
[ 0.036381] mtrr: corrected configuration.
[ 0.037035] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.037035] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.037035] ACPI: Added _OSI(Module Device)
[ 0.037035] ACPI: Added _OSI(Processor Device)
[ 0.037035] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.037035] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.037035] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.037035] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.037035] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.037035] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.042699] ACPI: Interpreter enabled
[ 0.042718] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.042719] ACPI: Using IOAPIC for interrupt routing
[ 0.042747] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.043892] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
[ 0.043904] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.044210] ACPI: Enabled 10 GPEs in block 00 to 1F
[ 0.054244] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.054248] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
[ 0.054383] acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.054393] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
[ 0.054616] PCI host bridge to bus 0000:00
[ 0.054618] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.054619] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.054620] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.054622] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.054623] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xefffffff window]
[ 0.054624] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfebfffff window]
[ 0.054625] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.054641] pci 0000:00:00.0: [10de:03e2] type 00 class 0x050000
[ 0.054840] pci 0000:00:01.0: [10de:03e1] type 00 class 0x060100
[ 0.054848] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
[ 0.054922] pci 0000:00:01.1: [10de:03eb] type 00 class 0x0c0500
[ 0.054932] pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
[ 0.054944] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
[ 0.054948] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
[ 0.054971] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.055028] pci 0000:00:01.2: [10de:03f5] type 00 class 0x050000
[ 0.055100] pci 0000:00:02.0: [10de:03f1] type 00 class 0x0c0310
[ 0.055108] pci 0000:00:02.0: reg 0x10: [mem 0xeffff000-0xefffffff]
[ 0.055138] pci 0000:00:02.0: supports D1 D2
[ 0.055139] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055192] pci 0000:00:02.1: [10de:03f2] type 00 class 0x0c0320
[ 0.055201] pci 0000:00:02.1: reg 0x10: [mem 0xefffec00-0xefffecff]
[ 0.055235] pci 0000:00:02.1: supports D1 D2
[ 0.055236] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055299] pci 0000:00:04.0: [10de:03f3] type 01 class 0x060401
[ 0.055375] pci 0000:00:05.0: [10de:03f0] type 00 class 0x040300
[ 0.055384] pci 0000:00:05.0: reg 0x10: [mem 0xefff8000-0xefffbfff]
[ 0.055418] pci 0000:00:05.0: PME# supported from D3hot D3cold
[ 0.055477] pci 0000:00:06.0: [10de:03ec] type 00 class 0x01018a
[ 0.055496] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
[ 0.055504] pci 0000:00:06.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.055505] pci 0000:00:06.0: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.055506] pci 0000:00:06.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.055507] pci 0000:00:06.0: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.055567] pci 0000:00:07.0: [10de:03ef] type 00 class 0x068000
[ 0.055574] pci 0000:00:07.0: reg 0x10: [mem 0xefffd000-0xefffdfff]
[ 0.055577] pci 0000:00:07.0: reg 0x14: [io 0xe080-0xe087]
[ 0.055603] pci 0000:00:07.0: supports D1 D2
[ 0.055604] pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055658] pci 0000:00:08.0: [10de:03f6] type 00 class 0x010185
[ 0.055665] pci 0000:00:08.0: reg 0x10: [io 0xe000-0xe007]
[ 0.055667] pci 0000:00:08.0: reg 0x14: [io 0xdc00-0xdc03]
[ 0.055670] pci 0000:00:08.0: reg 0x18: [io 0xd880-0xd887]
[ 0.055673] pci 0000:00:08.0: reg 0x1c: [io 0xd800-0xd803]
[ 0.055676] pci 0000:00:08.0: reg 0x20: [io 0xd480-0xd48f]
[ 0.055678] pci 0000:00:08.0: reg 0x24: [mem 0xefffc000-0xefffcfff]
[ 0.055739] pci 0000:00:08.1: [10de:03f6] type 00 class 0x010185
[ 0.055746] pci 0000:00:08.1: reg 0x10: [io 0xd400-0xd407]
[ 0.055748] pci 0000:00:08.1: reg 0x14: [io 0xd080-0xd083]
[ 0.055751] pci 0000:00:08.1: reg 0x18: [io 0xd000-0xd007]
[ 0.055754] pci 0000:00:08.1: reg 0x1c: [io 0xcc00-0xcc03]
[ 0.055757] pci 0000:00:08.1: reg 0x20: [io 0xc880-0xc88f]
[ 0.055759] pci 0000:00:08.1: reg 0x24: [mem 0xefff7000-0xefff7fff]
[ 0.055827] pci 0000:00:09.0: [10de:03e8] type 01 class 0x060400
[ 0.055849] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055909] pci 0000:00:0b.0: [10de:03e9] type 01 class 0x060400
[ 0.055930] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.055986] pci 0000:00:0c.0: [10de:03e9] type 01 class 0x060400
[ 0.056009] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.056064] pci 0000:00:0d.0: [10de:03d6] type 00 class 0x030000
[ 0.056069] pci 0000:00:0d.0: reg 0x10: [mem 0xee000000-0xeeffffff]
[ 0.056073] pci 0000:00:0d.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.056076] pci 0000:00:0d.0: reg 0x1c: [mem 0xed000000-0xedffffff 64bit]
[ 0.056080] pci 0000:00:0d.0: reg 0x30: [mem 0xeffc0000-0xeffdffff pref]
[ 0.056147] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 0.056200] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 0.056250] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 0.056300] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 0.056353] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 0.056452] pci 0000:00:04.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.056456] pci 0000:00:04.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.056457] pci 0000:00:04.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.056458] pci 0000:00:04.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.056459] pci 0000:00:04.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.056460] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xefffffff window] (subtractive decode)
[ 0.056461] pci 0000:00:04.0: bridge window [mem 0xf8000000-0xfebfffff window] (subtractive decode)
[ 0.056491] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.056521] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.056543] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.057366] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[ 0.057500] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
[ 0.057633] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.057765] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.057897] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[ 0.058030] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
[ 0.058162] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[ 0.058295] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
[ 0.058430] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.058566] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[ 0.058701] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[ 0.058836] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 0.058971] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *10
[ 0.059107] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.059239] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.059376] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.059511] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *5
[ 0.059701] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.059992] SCSI subsystem initialized
[ 0.060060] libata version 3.00 loaded.
[ 0.060060] pci 0000:00:0d.0: vgaarb: setting as boot VGA device
[ 0.060060] pci 0000:00:0d.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.060060] pci 0000:00:0d.0: vgaarb: bridge control possible
[ 0.060060] vgaarb: loaded
[ 0.060060] ACPI: bus type USB registered
[ 0.060060] usbcore: registered new interface driver usbfs
[ 0.060060] usbcore: registered new interface driver hub
[ 0.060062] usbcore: registered new device driver usb
[ 0.060105] EDAC MC: Ver: 3.0.0
[ 0.060105] PCI: Using ACPI for IRQ routing
[ 0.062868] PCI: pci_cache_line_size set to 64 bytes
[ 0.062895] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.062896] e820: reserve RAM buffer [mem 0xbffa0000-0xbfffffff]
[ 0.062990] NetLabel: Initializing
[ 0.062990] NetLabel: domain hash size = 128
[ 0.062991] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.063003] NetLabel: unlabeled traffic allowed by default
[ 0.063016] clocksource: Switched to clocksource refined-jiffies
[ 0.075784] VFS: Disk quotas dquot_6.6.0
[ 0.075806] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.075929] AppArmor: AppArmor Filesystem Enabled
[ 0.075961] pnp: PnP ACPI init
[ 0.076508] pnp 00:00: [dma 3]
[ 0.076619] pnp 00:00: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.077063] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.077065] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.077066] system 00:01: [io 0x0580-0x05ff] has been reserved
[ 0.077067] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.077068] system 00:01: [io 0x0880-0x08ff] has been reserved
[ 0.077069] system 00:01: [io 0x0d00-0x0d7f] has been reserved
[ 0.077070] system 00:01: [io 0x0d80-0x0dff] has been reserved
[ 0.077072] system 00:01: [io 0x1100-0x117f] has been reserved
[ 0.077073] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.077074] system 00:01: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 0.077076] system 00:01: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 0.077077] system 00:01: [mem 0x000de000-0x000dffff window] has been reserved
[ 0.077078] system 00:01: [mem 0xfec80000-0xfecfffff] has been reserved
[ 0.077080] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.077081] system 00:01: [mem 0xfefe1000-0xfefe1fff] has been reserved
[ 0.077082] system 00:01: [mem 0xfee01000-0xfeefffff] has been reserved
[ 0.077083] system 00:01: [mem 0xffb80000-0xffffffff] could not be reserved
[ 0.077087] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077261] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.077372] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.077373] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.077376] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077629] pnp 00:04: [dma 0 disabled]
[ 0.077674] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.077787] system 00:05: [io 0x0280-0x028f] has been reserved
[ 0.077788] system 00:05: [io 0x0290-0x029f] has been reserved
[ 0.077791] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.077859] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.077862] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.078111] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.078113] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.078114] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.078115] system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.078118] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.078417] pnp: PnP ACPI: found 8 devices
[ 0.084296] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.084320] clocksource: Switched to clocksource acpi_pm
[ 0.084339] pci 0000:00:04.0: PCI bridge to [bus 01]
[ 0.084345] pci 0000:00:09.0: PCI bridge to [bus 02]
[ 0.084348] pci 0000:00:0b.0: PCI bridge to [bus 03]
[ 0.084351] pci 0000:00:0c.0: PCI bridge to [bus 04]
[ 0.084355] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.084356] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.084357] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.084358] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.084359] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xefffffff window]
[ 0.084360] pci_bus 0000:00: resource 9 [mem 0xf8000000-0xfebfffff window]
[ 0.084362] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.084363] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.084364] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.084365] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.084366] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xefffffff window]
[ 0.084367] pci_bus 0000:01: resource 9 [mem 0xf8000000-0xfebfffff window]
[ 0.084437] NET: Registered protocol family 2
[ 0.084678] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.084865] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.085204] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.085297] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.085355] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.085471] NET: Registered protocol family 1
[ 0.085802] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 0.164413] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 0.164510] pci 0000:00:0d.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.164520] PCI: CLS 64 bytes, default 64
[ 0.164567] Unpacking initramfs...
[ 0.871353] Freeing initrd memory: 59088K
[ 0.871947] PCI-DMA: Disabling AGP.
[ 0.872030] PCI-DMA: aperture base @ b4000000 size 65536 KB
[ 0.872031] PCI-DMA: using GART IOMMU.
[ 0.872033] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.874185] LVT offset 1 assigned for vector 0x400
[ 0.874196] [Firmware Bug]: cpu 1, try to use APIC500 (LVT offset 0) for vector 0x10400, but the register is already in use for vector 0xf9 on another cpu
[ 0.874258] [Firmware Bug]: cpu 1, IBS interrupt offset 0 not available (MSRC001103A=0x0000000000000100)
[ 0.874389] Scanning for low memory corruption every 60 seconds
[ 0.874961] Initialise system trusted keyrings
[ 0.874970] Key type blacklist registered
[ 0.875155] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[ 0.876253] zbud: loaded
[ 0.876780] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.877055] fuse init (API version 7.26)
[ 0.879204] Key type asymmetric registered
[ 0.879206] Asymmetric key parser 'x509' registered
[ 0.879259] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.879310] io scheduler noop registered
[ 0.879311] io scheduler deadline registered
[ 0.879336] io scheduler cfq registered (default)
[ 0.879958] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.879970] ACPI: Power Button [PWRB]
[ 0.880033] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.880058] ACPI: Power Button [PWRF]
[ 0.880346] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.900783] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.902726] Linux agpgart interface v0.103
[ 0.904700] loop: module loaded
[ 0.904962] libphy: Fixed MDIO Bus: probed
[ 0.904963] tun: Universal TUN/TAP device driver, 1.6
[ 0.905055] PPP generic driver version 2.4.2
[ 0.905127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.905130] ehci-pci: EHCI PCI platform driver
[ 0.905381] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 0.905388] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.905395] ehci-pci 0000:00:02.1: debug port 1
[ 0.905424] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 0.905445] ehci-pci 0000:00:02.1: irq 22, io mem 0xefffec00
[ 0.920062] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.920117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.920118] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.920119] usb usb1: Product: EHCI Host Controller
[ 0.920120] usb usb1: Manufacturer: Linux 4.15.0-51-generic ehci_hcd
[ 0.920121] usb usb1: SerialNumber: 0000:00:02.1
[ 0.920308] hub 1-0:1.0: USB hub found
[ 0.920314] hub 1-0:1.0: 10 ports detected
[ 0.920518] ehci-platform: EHCI generic platform driver
[ 0.920532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.920539] ohci-pci: OHCI PCI platform driver
[ 0.920723] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 0.920729] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.920771] ohci-pci 0000:00:02.0: irq 23, io mem 0xeffff000
[ 0.982081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.982084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.982085] usb usb2: Product: OHCI PCI host controller
[ 0.982086] usb usb2: Manufacturer: Linux 4.15.0-51-generic ohci_hcd
[ 0.982086] usb usb2: SerialNumber: 0000:00:02.0
[ 0.982278] hub 2-0:1.0: USB hub found
[ 0.982285] hub 2-0:1.0: 10 ports detected
[ 0.982477] ohci-platform: OHCI generic platform driver
[ 0.982491] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.982570] i8042: PNP: No PS/2 controller found.
[ 0.982570] i8042: Probing ports directly.
[ 0.985070] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.985079] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.985278] mousedev: PS/2 mouse device common for all mice
[ 0.985448] rtc_cmos 00:02: RTC can wake from S4
[ 0.985620] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.985652] rtc_cmos 00:02: alarms up to one year, y3k, 114 bytes nvram
[ 0.985658] i2c /dev entries driver
[ 0.985715] device-mapper: uevent: version 1.0.3
[ 0.985805] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.985836] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.986256] NET: Registered protocol family 10
[ 0.990040] Segment Routing with IPv6
[ 0.990065] NET: Registered protocol family 17
[ 0.990156] Key type dns_resolver registered
[ 0.990453] RAS: Correctable Errors collector initialized.
[ 0.990507] microcode: CPU0: patch_level=0x010000c8
[ 0.990525] microcode: CPU1: patch_level=0x010000c8
[ 0.990587] microcode: Microcode Update Driver: v2.2.
[ 0.990602] sched_clock: Marking stable (990583202, 0)->(1072760342, -82177140)
[ 0.990776] registered taskstats version 1
[ 0.990784] Loading compiled-in X.509 certificates
[ 0.993705] Loaded X.509 cert 'Build time autogenerated kernel key: c1fa4cde9d34780ae4ae655b856adc042b663c06'
[ 0.993733] zswap: loaded using pool lzo/zbud
[ 0.997509] Key type big_key registered
[ 0.997514] Key type trusted registered
[ 0.999289] Key type encrypted registered
[ 0.999293] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.999296] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.999301] ima: Allocated hash algorithm: sha1
[ 0.999319] evm: HMAC attrs: 0x1
[ 0.999519] Magic number: 7:369:554
[ 0.999548] clockevents clockevent5: hash matches
[ 0.999626] acpi PNP0C0F:05: hash matches
[ 0.999628] acpi PNP0C01:00: hash matches
[ 0.999713] rtc_cmos 00:02: setting system clock to 2019-06-06 23:32:27 UTC (1559863947)
[ 0.999903] acpi_cpufreq: overriding BIOS provided _PSD data
[ 0.999969] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.999970] EDD information not available.
[ 1.002895] Freeing unused kernel image memory: 2408K
[ 1.020054] Write protecting the kernel read-only data: 20480k
[ 1.020785] Freeing unused kernel image memory: 2008K
[ 1.021352] Freeing unused kernel image memory: 1872K
[ 1.029709] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.116430] i2c i2c-0: nForce2 SMBus adapter at 0x600
[ 1.116435] ACPI Warning: SystemIO range 0x0000000000000700-0x000000000000073F conflicts with OpRegion 0x0000000000000700-0x000000000000073F (\_SB.PCI0.SM00) (20170831/utaddress-247)
[ 1.116440] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.116895] sata_nv 0000:00:08.0: version 3.5
[ 1.117211] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
[ 1.124605] scsi host0: sata_nv
[ 1.131647] scsi host1: sata_nv
[ 1.131702] ata1: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd480 irq 21
[ 1.131704] ata2: SATA max UDMA/133 cmd 0xd880 ctl 0xd800 bmdma 0xd488 irq 21
[ 1.131788] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.132143] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.524067] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.600091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.600372] ata1.00: ATA-11: KINGSTON SA400S37120G, SBFK71E0, max UDMA/133
[ 1.600374] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.600748] ata1.00: configured for UDMA/133
[ 1.601033] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 71E0 PQ: 0 ANSI: 5
[ 1.601375] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.601391] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.601403] sd 0:0:0:0: [sda] Write Protect is off
[ 1.601404] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.601430] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.601904] sda: sda1
[ 1.602322] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.684800] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr bc:5f:f4:07:df:a3
[ 1.684803] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 1.684890] pata_amd 0000:00:06.0: version 0.4.1
[ 1.685637] forcedeth 0000:00:07.0 enp0s7: renamed from eth0
[ 1.685706] scsi host2: pata_amd
[ 1.685789] scsi host3: pata_amd
[ 1.685816] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.685817] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.687380] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 23
[ 1.687656] scsi host4: sata_nv
[ 1.687735] scsi host5: sata_nv
[ 1.687762] ata5: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 23
[ 1.687763] ata6: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 23
[ 1.688156] ACPI: PCI Interrupt Link [LMC9] enabled at IRQ 22
[ 1.688288] nouveau 0000:00:0d.0: NVIDIA C61 (04c000a2)
[ 1.697578] nouveau 0000:00:0d.0: bios: version 05.61.32.28.01
[ 1.698432] nouveau 0000:00:0d.0: fb: 256 MiB of unknown memory type
[ 1.747505] [TTM] Zone kernel: Available graphics memory: 2922686 kiB
[ 1.747506] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.747507] [TTM] Initializing pool allocator
[ 1.747511] [TTM] Initializing DMA pool allocator
[ 1.747522] nouveau 0000:00:0d.0: DRM: VRAM: 253 MiB
[ 1.747523] nouveau 0000:00:0d.0: DRM: GART: 512 MiB
[ 1.747525] nouveau 0000:00:0d.0: DRM: TMDS table version 1.1
[ 1.747526] nouveau 0000:00:0d.0: DRM: DCB version 3.0
[ 1.747528] nouveau 0000:00:0d.0: DRM: DCB outp 00: 01000310 00000023
[ 1.747530] nouveau 0000:00:0d.0: DRM: DCB outp 01: 00110204 942b0003
[ 1.747531] nouveau 0000:00:0d.0: DRM: DCB conn 00: 0000
[ 1.747532] nouveau 0000:00:0d.0: DRM: DCB conn 01: 1131
[ 1.747533] nouveau 0000:00:0d.0: DRM: DCB conn 02: 0110
[ 1.747534] nouveau 0000:00:0d.0: DRM: DCB conn 03: 0111
[ 1.747535] nouveau 0000:00:0d.0: DRM: DCB conn 04: 0113
[ 1.747711] nouveau 0000:00:0d.0: DRM: Saving VGA fonts
[ 1.784150] nouveau 0000:00:0d.0: DRM: DCB type 4 not known
[ 1.784151] nouveau 0000:00:0d.0: DRM: Unknown-1 has no encoders, removing
[ 1.785234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.785234] [drm] Driver supports precise vblank timestamp query.
[ 1.787394] nouveau 0000:00:0d.0: DRM: MM: using M2MF for buffer copies
[ 1.815820] nouveau 0000:00:0d.0: DRM: allocated 1680x1050 fb: 0x9000, bo (ptrval)
[ 1.844103] fbcon: nouveaufb (fb0) is primary device
[ 1.850120] usb 2-2: New USB device found, idVendor=2a7a, idProduct=9a18
[ 1.850122] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.850123] usb 2-2: Product: CASUE USB Keyboard
[ 1.850124] usb 2-2: Manufacturer: CASUE
[ 1.864444] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.883319] usbcore: registered new interface driver usbhid
[ 1.883320] usbhid: USB HID core driver
[ 1.885496] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/0003:2A7A:9A18.0001/input/input5
[ 1.892081] tsc: Refined TSC clocksource calibration: 3415.532 MHz
[ 1.892088] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x313b9f76306, max_idle_ns: 440795376533 ns
[ 1.925781] Console: switching to colour frame buffer device 210x65
[ 1.926497] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.926561] ata4: port disabled--ignoring
[ 1.927906] nouveau 0000:00:0d.0: fb0: nouveaufb frame buffer device
[ 1.940086] [drm] Initialized nouveau 1.3.1 20120801 for 0000:00:0d.0 on minor 0
[ 1.944500] hid-generic 0003:2A7A:9A18.0001: input,hidraw0: USB HID v1.10 Keyboard [CASUE CASUE USB Keyboard] on usb-0000:00:02.0-2/input0
[ 1.944680] input: CASUE CASUE USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/0003:2A7A:9A18.0002/input/input6
[ 2.004201] hid-generic 0003:2A7A:9A18.0002: input,hidraw1: USB HID v1.10 Device [CASUE CASUE USB Keyboard] on usb-0000:00:02.0-2/input1
[ 2.007904] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.236078] usb 2-3: new low-speed USB device number 3 using ohci-pci
[ 2.256040] raid6: sse2x1 gen() 4396 MB/s
[ 2.304039] raid6: sse2x1 xor() 4563 MB/s
[ 2.333009] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.352046] raid6: sse2x2 gen() 6605 MB/s
[ 2.400037] raid6: sse2x2 xor() 7480 MB/s
[ 2.448044] raid6: sse2x4 gen() 7828 MB/s
[ 2.471122] usb 2-3: New USB device found, idVendor=0458, idProduct=0186
[ 2.471125] usb 2-3: New USB device strings: Mfr=4, Product=40, SerialNumber=0
[ 2.471126] usb 2-3: Product: Wired Mouse
[ 2.471127] usb 2-3: Manufacturer: KYE SYSTEMS CORP.
[ 2.481430] input: KYE SYSTEMS CORP. Wired Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/0003:0458:0186.0003/input/input7
[ 2.481525] hid-generic 0003:0458:0186.0003: input,hidraw2: USB HID v1.11 Mouse [KYE SYSTEMS CORP. Wired Mouse] on usb-0000:00:02.0-3/input0
[ 2.481573] usbhid 2-3:1.1: couldn't find an input interrupt endpoint
[ 2.496043] raid6: sse2x4 xor() 4386 MB/s
[ 2.496044] raid6: using algorithm sse2x4 gen() 7828 MB/s
[ 2.496045] raid6: .... xor() 4386 MB/s, rmw enabled
[ 2.496047] raid6: using intx1 recovery algorithm
[ 2.499523] xor: measuring software checksum speed
[ 2.536033] prefetch64-sse: 13151.000 MB/sec
[ 2.576032] generic_sse: 12617.000 MB/sec
[ 2.576033] xor: using function: prefetch64-sse (13151.000 MB/sec)
[ 2.593987] Btrfs loaded, crc32c=crc32c-generic
[ 2.652628] random: fast init done
[ 2.796501] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.796515] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.796518] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 2.797294] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.912242] clocksource: Switched to clocksource tsc
[ 3.018879] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.031259] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 3.031370] systemd[1]: Detected architecture x86-64.
[ 3.033053] systemd[1]: Set hostname to <inti-desktop>.
[ 3.040080] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 3.213644] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 3.213646] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.213647] usb 1-4: Product: 802.11 n WLAN
[ 3.213652] usb 1-4: Manufacturer: Ralink
[ 3.213653] usb 1-4: SerialNumber: 1.0
[ 3.231726] systemd[1]: Reached target User and Group Name Lookups.
[ 3.231807] systemd[1]: Reached target Remote File Systems.
[ 3.231988] systemd[1]: Created slice System Slice.
[ 3.232080] systemd[1]: Listening on udev Kernel Socket.
[ 3.232138] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.232181] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.232227] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.260768] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 3.322705] lp: driver loaded but no devices found
[ 3.336580] ppdev: user-space parallel port driver
[ 3.338332] parport_pc 00:00: reported by Plug and Play ACPI
[ 3.338399] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 3.378450] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k SSFS
[ 3.411145] systemd-journald[329]: Received request to flush runtime journal from PID 1
[ 3.428189] lp0: using parport0 (interrupt-driven).
[ 3.428695] systemd-journald[329]: File /var/log/journal/1975cc0879614ce88a5940de34910d44/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 3.598705] audit: type=1400 audit(1559863950.092:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=441 comm="apparmor_parser"
[ 3.598709] audit: type=1400 audit(1559863950.092:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=441 comm="apparmor_parser"
[ 3.598710] audit: type=1400 audit(1559863950.092:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=441 comm="apparmor_parser"
[ 3.598711] audit: type=1400 audit(1559863950.092:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=441 comm="apparmor_parser"
[ 3.599195] audit: type=1400 audit(1559863950.092:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=440 comm="apparmor_parser"
[ 3.599199] audit: type=1400 audit(1559863950.092:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=440 comm="apparmor_parser"
[ 3.604045] audit: type=1400 audit(1559863950.096:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=444 comm="apparmor_parser"
[ 3.605575] audit: type=1400 audit(1559863950.100:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=443 comm="apparmor_parser"
[ 3.605579] audit: type=1400 audit(1559863950.100:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=443 comm="apparmor_parser"
[ 3.854490] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.427997] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 4.433797] kvm: Nested Virtualization enabled
[ 4.433804] kvm: Nested Paging enabled
[ 4.435578] MCE: In-kernel MCE decoding enabled.
[ 4.438783] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.438785] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.441902] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 4.541725] EDAC amd64: Node 0: DRAM ECC disabled.
[ 4.541727] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 4.670505] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[ 4.671248] forcedeth 0000:00:07.0 enp0s7: no link during initialization
[ 4.673374] IPv6: ADDRCONF(NETDEV_UP): enp0s7: link is not ready
[ 4.779972] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 4.779982] snd_hda_intel 0000:00:05.0: Disabling MSI
[ 4.798751] nouveau 0000:00:0d.0: bus: MMIO write of 00720001 FAULT at 00b000
[ 4.852105] usb 1-4: reset high-speed USB device number 4 using ehci-pci
[ 5.023053] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 5.054142] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 5.066740] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.067164] usbcore: registered new interface driver rt2800usb
[ 5.079278] rt2800usb 1-4:1.0 wlx000f004088a2: renamed from wlan0
[ 5.100807] IPv6: ADDRCONF(NETDEV_UP): wlx000f004088a2: link is not ready
[ 5.100870] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 5.105439] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36
[ 5.452686] IPv6: ADDRCONF(NETDEV_UP): wlx000f004088a2: link is not ready
[ 5.503245] IPv6: ADDRCONF(NETDEV_UP): wlx000f004088a2: link is not ready
[ 5.536159] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1705: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[ 5.536167] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.536173] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[ 5.536176] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
[ 5.536179] snd_hda_codec_via hdaudioC0D0: inputs:
[ 5.536184] snd_hda_codec_via hdaudioC0D0: Rear Mic=0x1a
[ 5.536189] snd_hda_codec_via hdaudioC0D0: Front Mic=0x1e
[ 5.536193] snd_hda_codec_via hdaudioC0D0: Line=0x1b
[ 5.692444] systemd-journald[329]: File /var/log/journal/1975cc0879614ce88a5940de34910d44/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 6.875252] wlx000f004088a2: authenticate with 8c:10:d4:88:cc:ee
[ 6.899541] wlx000f004088a2: send auth to 8c:10:d4:88:cc:ee (try 1/3)
[ 6.901520] wlx000f004088a2: authenticated
[ 6.904259] wlx000f004088a2: associate with 8c:10:d4:88:cc:ee (try 1/3)
[ 6.907637] wlx000f004088a2: RX AssocResp from 8c:10:d4:88:cc:ee (capab=0x1411 status=0 aid=5)
[ 6.914997] wlx000f004088a2: associated
[ 6.917681] wlx000f004088a2: Limiting TX power to 30 (30 - 0) dBm as advertised by 8c:10:d4:88:cc:ee
[ 6.938745] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:05.0/sound/card0/input8
[ 6.938804] input: HDA NVidia Line as /devices/pci0000:00/0000:00:05.0/sound/card0/input9
[ 6.938850] input: HDA NVidia Line Out as /devices/pci0000:00/0000:00:05.0/sound/card0/input10
[ 7.010563] IPv6: ADDRCONF(NETDEV_CHANGE): wlx000f004088a2: link becomes ready
[ 7.497880] nouveau 0000:00:0d.0: bus: MMIO write of 01040001 FAULT at 00b010
[ 202.002735] random: crng init done
[ 202.002742] random: 7 urandom warning(s) missed due to ratelimiting
[ 720.233956] nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b010
[ 720.234603] nouveau 0000:00:0d.0: bus: MMIO write of 00720001 FAULT at 00b000
[ 721.468835] nouveau 0000:00:0d.0: bus: MMIO write of 00f00001 FAULT at 00b010
[ 728.772481] nouveau 0000:00:0d.0: bus: MMIO write of 02420001 FAULT at 00b020
[ 728.982311] nouveau 0000:00:0d.0: bus: MMIO write of 00000000 FAULT at 00b020
Edit: Just read this thread.
https://forums.linuxmint.com/viewtopic.php?t=282580
and looks like the HW Iḿ using is not supported,
I'd hate to be forced to use windows, please help!
inxi -Gx
Graphics:
Device-1: NVIDIA C61 [GeForce 7025 / nForce 630a] vendor: ASRock
driver: N/A bus ID: 00:0d.0
Display: x11 server: X.Org 1.19.6 driver: fbdev,nouveau
unloaded: modesetting,vesa resolution: 640x480~73Hz
OpenGL: renderer: llvmpipe (LLVM 7.0 128 bits) v: 3.3 Mesa 18.2.8
Adv Reply
Bookmarks