Results 1 to 3 of 3

Thread: DVD to Mpeg2

  1. #1
    Join Date
    Oct 2010
    Beans
    122

    DVD to Mpeg2

    I'm using Ubuntu 18.04 and want to rip a Karaoke DVD and make a VCD for use on an old player. I have tried ripping with Handbrake using the Mpeg2 setting. Then I have tried to burn using K3b and DeVeDe and in both cases I get an instant error message. So then I tried ripping using VLC media player again using a Mpeg2 setting. I got the same results when I wanted to burn it using K3b or DeVeDe. I would appreciate some suggestions on what I should do next.

    Error results from DeVeDe:
    Code:
    Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1739)
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_set_output_size_for_current_track
    BraseroBurnURI stopping
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_get_session_output_size
    BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_5AOCZZ.bin toc = /tmp/brasero_tmp_5AOCZZ.cue
    BraseroBurnURI called brasero_job_get_session_output_size
    BraseroBurnURI called brasero_job_get_action
    BraseroBurnURI called brasero_job_get_current_track
    BraseroBurnURI no burn:// URI found
    BraseroBurnURI stopping
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_set_output_size_for_current_track
    BraseroLocalTrack stopping
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_get_session_output_size
    BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_L2QCZZ.bin toc = /tmp/brasero_tmp_L2QCZZ.cue
    BraseroLocalTrack called brasero_job_get_session_output_size
    BraseroLocalTrack called brasero_job_get_action
    BraseroLocalTrack called brasero_job_get_current_track
    BraseroLocalTrack no remote URIs
    BraseroLocalTrack stopping
    BraseroWodim called brasero_job_get_action
    BraseroWodim getting varg
    BraseroWodim called brasero_job_get_action
    BraseroWodim got varg:
    BraseroWodim deactivating
    BraseroWodim called brasero_job_get_action
    BraseroWodim getting varg
    BraseroWodim called brasero_job_get_action
    BraseroWodim called brasero_job_get_device
    BraseroWodim called brasero_job_get_flags
    BraseroWodim called brasero_job_get_speed
    BraseroWodim called brasero_job_get_flags
    BraseroWodim called brasero_job_get_input_type
    BraseroWodim called brasero_job_get_fd_in
    BraseroWodim called brasero_job_get_current_track
    BraseroWodim called brasero_job_set_current_action
    BraseroWodim got varg:
        wodim
        -v
        dev=/dev/sr0
        speed=48
        driveropts=burnfree
        -dao
        fs=16m
        -text
        cuefile=/home/mlempenau/Copy/movie/movie.cue
    BraseroWodim Launching command in /home/mlempenau/Copy/movie
    BraseroWodim called brasero_job_get_fd_out
    BraseroWodim called brasero_job_get_fd_in
    BraseroWodim called brasero_job_get_fd_out
    BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
    BraseroWodim called brasero_job_get_flags
    BraseroWodim stderr: wodim: Resource temporarily unavailable. Cannot get mmap for 16781312 Bytes on /dev/zero.
    BraseroWodim called brasero_job_get_flags
    BraseroWodim stdout: TOC Type: 1 = CD-ROM
    BraseroWodim stderr: HUP
    BraseroWodim stdout: HUP
    BraseroWodim process finished with status 11
    BraseroWodim called brasero_job_error
    BraseroWodim finished with an error
    BraseroWodim asked to stop because of an error
        error        = 0
        message    = "no message"
    BraseroWodim stopping
    Session error : unknown (brasero_burn_record brasero-burn.c:2859)
    Last edited by lisati; March 28th, 2019 at 11:35 AM. Reason: Added [CODE] and [/CODE] for readability

  2. #2
    Join Date
    Jun 2007
    Location
    Paraparaumu, New Zealand
    Beans
    Hidden!

    Re: DVD to Mpeg2

    I sometimes use Handbrake as part of a process of re-authoring DVDs I've previously made of camcorder footage. So far I have had useful results with both the m4v container and the mkv container, without recoding to mpeg2 within Handbrake - both devede and DVDStyler seem to cope well with .mkv files I've made on both Windows and (l)ubuntu.
    Forum DOs and DON'Ts
    Please use CODE tags
    Including your email address in a post is not recommended
    My Blog

  3. #3
    Join Date
    Oct 2010
    Beans
    122

    Re: DVD to Mpeg2

    Your advice was very good. I was trying to do something unnecessary. I deleted the files and started over using the default setting in Handbreak. (Mpeg4) Things went much better and using DeVeDe I was able to start burning a VCD. But at some point it gives me an error. "Probably a buffer underrun occurred. Please use a lower burn speed." So I cut the burn speed in half but get the same error message. I have copied the debugging output from the first time below and followed it with the debugging output from the last time. Any suggestion would be appreciated.

    Devices
    -----------------------
    TSSTcorp CDDVDW SH-224BB SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]


    System
    -----------------------
    K3b Version: 17.12.3
    KDE Version: 5.44.0
    Qt Version: 5.9.5
    Kernel: 4.15.0-46-generic


    Used versions
    -----------------------
    cdrecord: 1.1.11


    cdrecord
    -----------------------
    scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.11
    SCSI buffer size: 64512
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    TOC Type: 1 = CD-ROM
    Driveropts: 'burnfree'
    Device type : Removable CD-ROM
    Version : 5
    Response Format: 2
    Capabilities :
    Vendor_info : 'TSSTcorp'
    Identification : 'CDDVDW SH-224BB '
    Revision : 'SB00'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0009 (CD-R)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x001B (DVD+R)
    Profile: 0x001A (DVD+RW)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x000A (CD-RW)
    Profile: 0x0009 (CD-R) (current)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1286912 = 1256 KB
    FIFO size : 12582912 = 12288 KB
    Speed set to 8468 KB/s
    Track 01: data 1 MB
    Track 02: data 59 MB
    Track 03: data 52 MB
    Track 04: data 56 MB
    Track 05: data 67 MB
    Track 06: data 64 MB
    Track 07: data 62 MB
    Track 08: data 61 MB
    Track 09: data 56 MB
    Track 10: data 70 MB
    Track 11: data 60 MB
    Total size: 613 MB (60:45.13) = 273385 sectors
    Lout start: 613 MB (60:47/10) = 273385 sectors
    Current Secsize: 2048
    ATIP info from disk:
    Indicated writing power: 7
    Is not unrestricted
    Is not erasable
    ATIP start of lead in: -11597 (97:27/28)
    ATIP start of lead out: 359849 (79:59/74)
    Disk type: Short strategy type (Phthalocyanine or similar)
    Manuf. index: 20
    Manufacturer: Princo Corporation
    Blocks total: 359849 Blocks current: 359849 Blocks remaining: 86464
    Starting to write CD/DVD at speed 48.0 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
    1 seconds.
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Sending CUE sheet...
    Writing pregap for track 1 at -150
    Starting new track at sector: 0
    Track 01: 0 of 1 MB written.
    Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 00 00 00 51 00 00 1B 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
    Sense Key: 0x3 Medium Error, deferred error, Segment 0
    Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.027s timeout 200s
    /usr/bin/wodim: A write error occured.
    /usr/bin/wodim: Please properly read the error message above.
    write track data: error after 190512 bytes
    Writing time: 306.314s
    Average write speed 19.5x.
    Fixating...
    Fixating time: 0.003s
    /usr/bin/wodim: fifo had 194 puts and 4 gets.
    /usr/bin/wodim: fifo was 0 times empty and 2 times full, min fill was 98%.
    BURN-Free was never needed.


    cdrecord command:
    -----------------------
    /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -sao driveropts=burnfree cuefile=/home/mlempenau/Copy/movie/movie.cue


    Devices
    -----------------------
    TSSTcorp CDDVDW SH-224BB SB00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump] [%7]


    System
    -----------------------
    K3b Version: 17.12.3
    KDE Version: 5.44.0
    Qt Version: 5.9.5
    Kernel: 4.15.0-46-generic


    Used versions
    -----------------------
    cdrecord: 1.1.11


    cdrecord
    -----------------------
    scsidev: '/dev/sr0'
    devname: '/dev/sr0'
    scsibus: -2 target: -2 lun: -2
    Linux sg driver version: 3.5.27
    Wodim version: 1.1.11
    SCSI buffer size: 64512
    Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
    communication breaks or freezes immediately after that.
    TOC Type: 1 = CD-ROM
    Driveropts: 'burnfree'
    Device type : Removable CD-ROM
    Version : 5
    Response Format: 2
    Capabilities :
    Vendor_info : 'TSSTcorp'
    Identification : 'CDDVDW SH-224BB '
    Revision : 'SB00'
    Device seems to be: Generic mmc2 DVD-R/DVD-RW.
    Current: 0x0009 (CD-R)
    Profile: 0x0015 (DVD-R/DL sequential recording)
    Profile: 0x0016 (DVD-R/DL layer jump recording)
    Profile: 0x002B (DVD+R/DL)
    Profile: 0x001B (DVD+R)
    Profile: 0x001A (DVD+RW)
    Profile: 0x0014 (DVD-RW sequential recording)
    Profile: 0x0013 (DVD-RW restricted overwrite)
    Profile: 0x0012 (DVD-RAM)
    Profile: 0x0011 (DVD-R sequential recording)
    Profile: 0x0010 (DVD-ROM)
    Profile: 0x000A (CD-RW)
    Profile: 0x0009 (CD-R) (current)
    Profile: 0x0008 (CD-ROM)
    Profile: 0x0002 (Removable disk)
    Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
    Driver flags : MMC-3 SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
    Drive buf size : 1286912 = 1256 KB
    FIFO size : 12582912 = 12288 KB
    Speed set to 5645 KB/s
    Track 01: data 1 MB
    Track 02: data 59 MB
    Track 03: data 52 MB
    Track 04: data 56 MB
    Track 05: data 67 MB
    Track 06: data 64 MB
    Track 07: data 62 MB
    Track 08: data 61 MB
    Track 09: data 56 MB
    Track 10: data 70 MB
    Track 11: data 60 MB
    Total size: 613 MB (60:45.13) = 273385 sectors
    Lout start: 613 MB (60:47/10) = 273385 sectors
    Current Secsize: 2048
    ATIP info from disk:
    Indicated writing power: 7
    Is not unrestricted
    Is not erasable
    ATIP start of lead in: -11597 (97:27/28)
    ATIP start of lead out: 359849 (79:59/74)
    Disk type: Short strategy type (Phthalocyanine or similar)
    Manuf. index: 20
    Manufacturer: Princo Corporation
    Blocks total: 359849 Blocks current: 359849 Blocks remaining: 86464
    Starting to write CD/DVD at speed 32.0 in real SAO mode for single session.
    Last chance to quit, starting real write in 2 seconds.
    1 seconds.
    0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    Performing OPC...
    Sending CUE sheet...
    Writing pregap for track 1 at -150
    Starting new track at sector: 0
    Track 01: 0 of 1 MB written.
    Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
    CDB: 2A 00 00 00 00 51 00 00 1B 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 71 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
    Sense Key: 0x3 Medium Error, deferred error, Segment 0
    Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.027s timeout 200s
    /usr/bin/wodim: A write error occured.
    /usr/bin/wodim: Please properly read the error message above.
    write track data: error after 190512 bytes
    Writing time: 191.046s
    Average write speed 22.5x.
    Fixating...
    Fixating time: 0.003s
    /usr/bin/wodim: fifo had 194 puts and 4 gets.
    /usr/bin/wodim: fifo was 0 times empty and 1 times full, min fill was 98%.
    BURN-Free was never needed.


    cdrecord command:
    -----------------------
    /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=32 -sao driveropts=burnfree cuefile=/home/mlempenau/Copy/movie/movie.cue

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •