Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

  1. #1
    Join Date
    May 2014
    Beans
    23

    Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    I wiped my PC and installed WIN7 on disk1, I want to install Xubuntu on disk0 for a dual boot. I get to the installation type screen and it says at the top of the options: "This computer currently has no detected operating system. What would you like to do?" I have a freshly installed instance of WIN7 Enterprise x64. What gives?

    A couple peculiar observations. Windows chose to install itself on disk1, I didnt choose that, I was expecting it to install on disk0. Is this an issue?

    I ran GParted from the Xubuntu boot disk. I saw sda empty as expected, and sdb has the Windows partitions as expected. I see sdb1 EFI system partition, sdb2 Microsoft reserved partition, and sdb3 basic data partition. One problem, sdb2 has a warning:

    Warning:
    Unable to detect file system! Possible reasons are:
    - The file system is damaged
    - The file system is unknown to GParted
    - There is no file system available (unformatted)
    - The device entry /dev/sdb2 is missing

    I booted into Windows and ran a checkdisk scan on C. Thats as far as I got and dont know where to go from here. Like I said, I can boot into Windows no problem. Any help will be appreciated.

  2. #2
    Join Date
    Jun 2009
    Location
    SW Forida
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    Windows typically installs to drive seen by UEFI/BIOS as default boot drive. If installing Windows after Ubuntu, it could cause Windows to overwrite part or all of the Ubuntu install.

    You must have UEFI system, as Windows installed in UEFI mode, if you have an ESP - efi system partition.
    Be sure to boot and install Ubuntu in UEFI mode on other drive.

    Windows 7 does not have the fast start up/hibernation issue of always on hibernation. But if you left Windows 7 hibernated, grub/Linux NTFS driver will not see it.
    Also several other issues possible on why a drive not seen. Was either drive ever configured for RAID or Intel SRT? Often a default on some newer systems, you must have drives set to AHCI mode. Newer Windows needs AHCI driver installed before UEFI settings changed.

    If the only error is on sdb2 which is labeled as a System Reserved partition, then that is a false error from gparted. Gparted also gives same error on BIOS boot with gpt partitioning on the bios_grub partition. These are special types that have to be unformatted, but have assigned GUIDs so seen as official gpt partitions. Gparted should not be flagging as an issue, but just sees them as unformatted so flags error.
    UEFI boot install & repair info - Regularly Updated :
    https://ubuntuforums.org/showthread.php?t=2147295
    Please use Thread Tools above first post to change to [Solved] when/if answered completely.

  3. #3
    Join Date
    May 2014
    Beans
    23

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    Xubuntu sees both drives, it doesnt recognize Windows is installed during setup. If I change the bios to AHCI Windows doesnt boot, its gotta stay in UEFI.

    Im afraid if I install Xubuntu on the 2nd drive it will wipe out the Windows boot record and kill the Windows installation. What if I disconnect the Windows drive, install Xubuntu on the other drive, then edit the boot loader to see both OS's? Is there a way to do this or will it even work? Maybe I'll make a Ghost image of my Windows installation for backup and just do the Xubuntu install and see what happens....
    Last edited by paul142; January 25th, 2019 at 05:53 AM.

  4. #4
    Join Date
    Jun 2014
    Beans
    7,339

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    Did you verify that hibernation was not on? This generally is not the case with windows 7 but should be verified as a Linux system installer will not mount a hibernated partition.

    Dis-connecting the windows drive would probably be safest. You do need to make certain you install Xubuntu UEFI since a Legacy/MBR install of Linux/Grub will not boot a windows EFI install. If you do that, when you attach your windows drive and set the Xubuntu drive to boot priority in the BIOS, you can boot Xubuntu and run sudo update-grub and it should detect the windows system. You will need to create an EFI partition on the Xubuntu drive. You could also simply select the Xubuntu drive in the BIOS when you want to boot it, the windows drive in the BIOS when you want to boot windows.

  5. #5
    Join Date
    Jun 2009
    Location
    SW Forida
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    Post these:
    sudo fdisk -lu
    sudo gdisk -l /dev/sda
    sudo gdisk -l /dev/sdb
    UEFI boot install & repair info - Regularly Updated :
    https://ubuntuforums.org/showthread.php?t=2147295
    Please use Thread Tools above first post to change to [Solved] when/if answered completely.

  6. #6
    Join Date
    May 2014
    Beans
    23

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    Quote Originally Posted by yancek View Post
    Did you verify that hibernation was not on? This generally is not the case with windows 7 but should be verified as a Linux system installer will not mount a hibernated partition.

    Dis-connecting the windows drive would probably be safest. You do need to make certain you install Xubuntu UEFI since a Legacy/MBR install of Linux/Grub will not boot a windows EFI install. If you do that, when you attach your windows drive and set the Xubuntu drive to boot priority in the BIOS, you can boot Xubuntu and run sudo update-grub and it should detect the windows system. You will need to create an EFI partition on the Xubuntu drive. You could also simply select the Xubuntu drive in the BIOS when you want to boot it, the windows drive in the BIOS when you want to boot windows.
    Hibernation is not on.
    Last edited by paul142; January 26th, 2019 at 05:03 AM.

  7. #7
    Join Date
    May 2014
    Beans
    23

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    Quote Originally Posted by oldfred View Post
    Post these:
    sudo fdisk -lu
    sudo gdisk -l /dev/sda
    sudo gdisk -l /dev/sdb
    Heres what I got:

    xubuntu@xubuntu:~/Desktop$ sudo fdisk -lu
    Disk /dev/loop0: 1.3 GiB, 1358487552 bytes, 2653296 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes


    Disk /dev/sda: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: dos
    Disk identifier: 0x9bcf87a3


    Disk /dev/sdb: 931.5 GiB, 1000204886016 bytes, 1953525168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: gpt
    Disk identifier: 0AD76FD0-26A2-47CF-9C49-A9B31731BE56

    Device Start End Sectors Size Type
    /dev/sdb1 2048 206847 204800 100M EFI System
    /dev/sdb2 206848 468991 262144 128M Microsoft reserved
    /dev/sdb3 468992 1953523711 1953054720 931.3G Microsoft basic data
    xubuntu@xubuntu:~/Desktop$ sudo gdisk -l /dev/sda
    GPT fdisk (gdisk) version 1.0.3

    Partition table scan:
    MBR: MBR only
    BSD: not present
    APM: not present
    GPT: present

    Found valid MBR and GPT. Which do you want to use?
    1 - MBR
    2 - GPT
    3 - Create blank GPT

    Your answer: 1
    Disk /dev/sda: 1953525168 sectors, 931.5 GiB
    Model: TOSHIBA DT01ACA1
    Sector size (logical/physical): 512/4096 bytes
    Disk identifier (GUID): 65AB7B62-C2CA-4BC7-8AFB-BEE71050E9B8
    Partition table holds up to 128 entries
    Main partition table begins at sector 2 and ends at sector 33
    First usable sector is 34, last usable sector is 1953525134
    Partitions will be aligned on 2048-sector boundaries
    Total free space is 1953525101 sectors (931.5 GiB)

    Number Start (sector) End (sector) Size Code Name
    xubuntu@xubuntu:~/Desktop$ sudo gdisk -l /dev/sdb
    GPT fdisk (gdisk) version 1.0.3

    The protective MBR's 0xEE partition is oversized! Auto-repairing.

    Partition table scan:
    MBR: protective
    BSD: not present
    APM: not present
    GPT: present

    Found valid GPT with protective MBR; using GPT.
    Disk /dev/sdb: 1953525168 sectors, 931.5 GiB
    Model: WDC WD1002FAEX-0
    Sector size (logical/physical): 512/512 bytes
    Disk identifier (GUID): 0AD76FD0-26A2-47CF-9C49-A9B31731BE56
    Partition table holds up to 128 entries
    Main partition table begins at sector 2 and ends at sector 33
    First usable sector is 34, last usable sector is 1953525134
    Partitions will be aligned on 2048-sector boundaries
    Total free space is 3437 sectors (1.7 MiB)

    Number Start (sector) End (sector) Size Code Name
    1 2048 206847 100.0 MiB EF00 EFI system partition
    2 206848 468991 128.0 MiB 0C01 Microsoft reserved ...
    3 468992 1953523711 931.3 GiB 0700 Basic data partition
    xubuntu@xubuntu:~/Desktop$

  8. #8
    Join Date
    Jun 2009
    Location
    SW Forida
    Beans
    Hidden!
    Distro
    Kubuntu

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    You have UEFI with gpt partitioning in sdb.
    Always boot in UEFI mode.
    But sda is showing as MBR (msdos).
    And it is not showing any partitions. But is showing both MBR & gpt partitions were found.
    If you used Windows to convert from gpt to MBR, it does it incorrectly and leaves the backup gpt partition table but uses MBR. Then Linux tools see both MBR & gpt and do not know what to do.

    You need to do repairs of sda, but at this point not sure if you should be converting fully to MBR, or back to gpt.
    Generally if you are UEFI booting best if all drives are gpt.

    What was/is sda? Do you know what partitions you had on it?
    UEFI boot install & repair info - Regularly Updated :
    https://ubuntuforums.org/showthread.php?t=2147295
    Please use Thread Tools above first post to change to [Solved] when/if answered completely.

  9. #9
    Join Date
    May 2014
    Beans
    23

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    sda is just a blank drive, thats where I want to put Linux. Should I go into Windows and format it maybe? I actually tried to install Linux on sda and got an error that said:

    No root file system
    No root file system is defined
    Please correct this from the partitioning menu

    All I did was choose the drive to install on and thats what I got.
    Last edited by paul142; January 27th, 2019 at 01:58 AM.

  10. #10
    Join Date
    May 2014
    Beans
    23

    Re: Xubuntu 18.04.1 LTS Doesnt see WIN7 During Dual Boot Install

    I disconnected drive sdb and installed Linux on sda successfully but it wont boot, I have to go into F12 boot mode and choose the hard drive to boot the OS. At the top of the boot mode menu it says:

    Boot mode is set to: UEFI with Legacy OPROM; Secure boot: OFF

    So I reconnected the Windows drive and the PC boots directly into Windows. What do I need to do to get a menu on bootup and choose between OS's?

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •