This is hard to believe, but after a week of working perfectly, it happened again.
This is hard to believe, but after a week of working perfectly, it happened again.
Are there any clues in the log?Code:dmesg | grep -e rtl -e wlan
"Oh, Ubuntu, you are my favorite Linux-based operating system" --Dr. Sheldon Cooper, B.Sc., M.Sc., M.A., Ph.D., Sc.D.
I rebooted since this happened. It didn't take a reboot to get the higher speed back, just a disable and re-enable of the WIFI.
Your request:
Code:aparise@Daedalus:~$ sudo dpkg -s bcmwl-kernel-source | grep Status[sudo] password for aparise: dpkg-query: package 'bcmwl-kernel-source' is not installed and no information is available Use dpkg --info (= dpkg-deb --info) to examine archive files, and dpkg --contents (= dpkg-deb --contents) to list their contents. aparise@Daedalus:~$ history | grep purge 673 sudo apt-get purge -y --force-yes grub*-common grub-common:i386 shim-signed linux-signed* 679 sudo apt-get purge -y --force-yes grub*-common grub-common:i386 shim-signed linux-signed* 760 sudo apt-get purge wicd wicd-gtk 765 sudo apt-get purge wicd wicd-gtk 801 sudo apt-get purge -y --force-yes grub*-common grub-common:i386 shim-signed linux-signed* 841 sudo apt-get remove --purge flashplugin-installer 898 sudo apt-get remove --purge flashplugin-installer 900 sudo apt-get remove --purge flashplugin-installer 903 sudo apt-get remove --purge flashplugin-installer 996 sudo apt-get purge bluez # remove old versions 1300 sudo apt-get remove --purge ttf-mscorefonts-installer 1308 sudo apt --purge --reinstall install ttf-mscorefonts-installer 1434 sudo apt install ppa-purge 1435 sudo ppa-purge ppa:morphis/anbox-support 1546 sudo apt-get purge wicd 1580 sudo apt purge bcmwl-kernel-source 1583 history | grep purge 1601 sudo apt-get purge arp-scan 1605 history | grep purge aparise@Daedalus:~$
Sorry, I got confused and answered the wrong question.
Here is the correct output:
Code:aparise@Daedalus:~$ dmesg | grep -e rtl -e wlan[ 36.950730] rtl8188ee: rtl8188ee: Power Save off (module option) [ 36.950731] rtl8188ee: rtl8188ee: FW Power Save off (module option) [ 36.950774] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin [ 37.036358] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 37.036638] rtlwifi: rtlwifi: wireless switch is on [ 37.040140] rtl8188ee 0000:02:00.0 wlan1: renamed from wlan0 [ 37.111382] Modules linked in: crc32_pclmul snd_hda_codec arc4 snd_hda_core rtl8188ee ghash_clmulni_intel snd_hwdep cryptd rtl_pci snd_pcm rtlwifi snd_seq_midi mac80211 snd_seq_midi_event binfmt_misc intel_cstate cfg80211 intel_rapl_perf hid_multitouch snd_rawmidi joydev mei_me mei snd_seq snd_seq_device snd_timer input_leds serio_raw hp_wmi wmi_bmof sparse_keymap rtsx_pci_ms memstick lpc_ich snd mac_hid soundcore shpchp hp_wireless sch_fq_codel iptable_filter ip6table_filter ip6_tables br_netfilter bridge stp llc arp_tables parport_pc ppdev lp parport ip_tables x_tables autofs4 hid_logitech_hidpp hid_logitech_dj usbhid hid i915 rtsx_pci_sdmmc i2c_algo_bit drm_kms_helper syscopyarea sysfillrect psmouse sysimgblt fb_sys_fops rtsx_pci ahci wmi drm libahci r8169 mii video [ 55.960454] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 56.380936] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 56.464750] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 57.751267] wlan1: authenticate with f0:fc:c8:fd:18:f9 [ 57.761377] wlan1: send auth to f0:fc:c8:fd:18:f9 (try 1/3) [ 57.763914] wlan1: authenticated [ 57.768078] wlan1: associate with f0:fc:c8:fd:18:f9 (try 1/3) [ 57.773586] wlan1: RX AssocResp from f0:fc:c8:fd:18:f9 (capab=0x431 status=0 aid=1) [ 57.773860] wlan1: associated [ 58.045300] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 6725.168162] wlan1: deauthenticating from f0:fc:c8:fd:18:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 6727.790695] rtlwifi: rtlwifi: wireless switch is on [ 6731.030665] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6731.457375] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6731.513497] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 6732.381125] wlan1: authenticate with f0:fc:c8:fd:18:f9 [ 6732.391265] wlan1: send auth to f0:fc:c8:fd:18:f9 (try 1/3) [ 6732.393077] wlan1: authenticated [ 6732.396218] wlan1: associate with f0:fc:c8:fd:18:f9 (try 1/3) [ 6732.399881] wlan1: RX AssocResp from f0:fc:c8:fd:18:f9 (capab=0x431 status=0 aid=1) [ 6732.400234] wlan1: associated [ 6732.409123] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready [ 8604.573166] wlan1: deauthenticating from f0:fc:c8:fd:18:f9 by local choice (Reason: 3=DEAUTH_LEAVING) [ 8606.458966] rtlwifi: rtlwifi: wireless switch is on [ 8607.204104] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 8607.631243] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 8607.682825] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 8608.547207] wlan1: authenticate with f0:fc:c8:fd:18:f9 [ 8608.557332] wlan1: send auth to f0:fc:c8:fd:18:f9 (try 1/3) [ 8608.563565] wlan1: authenticated [ 8608.564660] wlan1: associate with f0:fc:c8:fd:18:f9 (try 1/3) [ 8608.568390] wlan1: RX AssocResp from f0:fc:c8:fd:18:f9 (capab=0x431 status=0 aid=1) [ 8608.568657] wlan1: associated [ 8608.577044] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready aparise@Daedalus:~$
It happened again, this time soon after boot. I have not rebooted or even re-enabled the WIFI yet:
Code:aparise@Daedalus:~$ dmesg | grep -e rtl -e wlan [ 40.798662] rtl8188ee: rtl8188ee: Power Save off (module option) [ 40.798663] rtl8188ee: rtl8188ee: FW Power Save off (module option) [ 40.798678] rtl8188ee: Using firmware rtlwifi/rtl8188efw.bin [ 41.093894] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 41.094141] rtlwifi: rtlwifi: wireless switch is on [ 41.096503] rtl8188ee 0000:02:00.0 wlan1: renamed from wlan0 [ 54.096882] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 54.520205] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 54.656908] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready [ 72.411713] wlan1: authenticate with f0:fc:c8:fd:18:f9 [ 72.421838] wlan1: send auth to f0:fc:c8:fd:18:f9 (try 1/3) [ 72.423673] wlan1: authenticated [ 72.424058] wlan1: associate with f0:fc:c8:fd:18:f9 (try 1/3) [ 72.427717] wlan1: RX AssocResp from f0:fc:c8:fd:18:f9 (capab=0x431 status=0 aid=1) [ 72.427961] wlan1: associated [ 72.851961] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready aparise@Daedalus:~$
Bookmarks