I installed Ubuntu 18.04 on laptop Kiano SlimNote 15.6 HDD with Intel N3350 CPU and everything works properly except wireless and bluetooth. Her is listing of relevant commands:
Code:
t@t-K:~$ sudo lshw -C network -numeric
[sudo] password for t:
*-network:0
description: Ethernet interface
physical id: 1
logical name: enp0s21f0u4u2
serial: aa:6d:34:06:92:88
size: 10Mbit/s
capacity: 100Mbit/s
capabilities: ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8152 driverversion=v1.09.9 duplex=half link=no multicast=yes port=MII speed=10Mbit/s
*-network:1
description: Wireless interface
physical id: 2
bus info: usb@1:7
logical name: wlx8420962c707a
serial: 84:20:96:2c:70:7a
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8xxxu driverversion=4.15.0-24-generic firmware=N/A ip=192.168.8.101 link=yes multicast=yes wireless=IEEE 802.11
Code:
t@t-K:~$ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 058f:5608 Alcor Micro Corp.
Bus 001 Device 004: ID 0bda:b720 Realtek Semiconductor Corp.
Bus 001 Device 007: ID 0bda:8152 Realtek Semiconductor Corp.
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 001 Device 002: ID 1ea7:0064
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code:
t@t-K:~$ dmesg | grep wlx8420962c707a
[ 10.582871] rtl8xxxu 1-7:1.2 wlx8420962c707a: renamed from wlan0
[ 10.647169] IPv6: ADDRCONF(NETDEV_UP): wlx8420962c707a: link is not ready
[ 10.656747] IPv6: ADDRCONF(NETDEV_UP): wlx8420962c707a: link is not ready
[ 10.691897] IPv6: ADDRCONF(NETDEV_UP): wlx8420962c707a: link is not ready
[ 11.486212] wlx8420962c707a: authenticate with c4:07:2f:09:4e:79
[ 11.489988] wlx8420962c707a: send auth to c4:07:2f:09:4e:79 (try 1/3)
[ 11.491551] wlx8420962c707a: authenticated
[ 11.492342] wlx8420962c707a: associate with c4:07:2f:09:4e:79 (try 1/3)
[ 11.495896] wlx8420962c707a: RX AssocResp from c4:07:2f:09:4e:79 (capab=0x1411 status=0 aid=2)
[ 11.497360] wlx8420962c707a: associated
[ 11.538205] IPv6: ADDRCONF(NETDEV_CHANGE): wlx8420962c707a: link becomes ready
Code:
t@t-K:~$ dmesg | grep -i blue
[ 8.351531] Bluetooth: Core ver 2.22
[ 8.351566] Bluetooth: HCI device and connection manager initialized
[ 8.351570] Bluetooth: HCI socket layer initialized
[ 8.351573] Bluetooth: L2CAP socket layer initialized
[ 8.351591] Bluetooth: SCO socket layer initialized
[ 8.422167] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 8.422174] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_config.bin
[ 8.423036] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2
[ 8.423043] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 8.425156] Bluetooth: hci0: rom_version status=0 version=1
[ 8.425172] Bluetooth: hci0: cfg_sz 0, total size 22496
[ 10.094328] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.094330] Bluetooth: BNEP filters: protocol multicast
[ 10.094336] Bluetooth: BNEP socket layer initialized
[ 21.536254] Bluetooth: RFCOMM TTY layer initialized
[ 21.536265] Bluetooth: RFCOMM socket layer initialized
[ 21.536277] Bluetooth: RFCOMM ver 1.11
Code:
t@t-K:~$ uname -r
4.15.0-24-generic
t@t-K:~$
Wireless works, but only very close to the router. The level shows only 40% and it should be close to 100%. Few meters from the router and the connection drops off.
Wit the BT it seems to be working but does not discover any bt devices even on very close range.
All my other laptops and smartphones work fine with this router.
I tried everything I could on my own but to no avail. Please help.
Bookmarks