Results 1 to 4 of 4

Thread: Nautilus in 18.04 can't browse samba network tree

  1. #1
    Join Date
    Nov 2016
    Beans
    12

    Unhappy Nautilus in 18.04 can't browse samba network tree

    Nautilus in Bionic Beaver 18.04 (all packages up to date) can not browse samba tree after clicking "Windows Network" icon. It will show "Empty Folder". When typing server address smb://192.168.1.1 or smb://server_name it will connect to the samba host and show me shared folders/printers over smb protocol. No problem here.
    The problem is with smb tree browsing. There is a part of Gnome - gnome virtual file system and gvfsd-smb-browse which should show the smb tree output, but it has a problem which I can see if I do in terminal:
    Code:
    killall gvfsd-smb-browse && GVFS_DEBUG=1 /usr/lib/gvfs/gvfsd-smb-browse
    and click Windows Network in Nautilus I see:
    Code:
    smb-network: Queued new job 0x55b19a2c9f40 (GVfsJobCreateMonitor)
    smb-network: send_reply(0x55b19a2c9f40), failed=1 (Action not supported by the processing engine)
    smb-network: backend_dbus_handler org.gtk.vfs.Mount:QueryFilesystemInfo (pid=5708)
    smb-network: Queued new job 0x55b19a2e7820 (GVfsJobQueryFsInfo)
    smb-network: send_reply(0x55b19a2e7820), failed=0 ()
    smb-network: backend_dbus_handler org.gtk.vfs.Mount:Enumerate (pid=5708)
    smb-network: Queued new job 0x55b19a2c30c0 (GVfsJobEnumerate)
    smb-network: send_reply(0x55b19a2c30c0), failed=0 ()
    I can see the smb tree if I do smbtree in terminal, no problem!

    I think this "action not supported by processing engine" is the culprit of Nautilus not being able to browse smb tree.
    But what is this problem??? Wrong compilation options or compilation against wrong samba package???
    Last edited by s-byczkowski; June 16th, 2018 at 03:11 PM. Reason: add Ubuntu version

  2. #2
    Join Date
    Dec 2009
    Beans
    6,816

    Re: Nautilus in 18.04 can't browse samba network tree

    Same answer I gave you before:
    Quote Originally Posted by Morbius1 View Post
    Edit /etc/samba/smb.conf.

    If you don't have an smb.conf install smbclient: sudo apt install smbclient

    Right below the workgroup = WORKGROUP line add this line:
    Code:
    client max protocol = NT1
    Does it work now? If it does remember:

    Good News: You should be able to browse again for samba / smb hosts.
    Bad News: Even though you will be able to see it you will not be able to access any host that has disabled SMB1 - like Win10.
    The default for "client max protocol" was changed to SMB3 so that it could connect to a Win10 machine or any other machine that has disabled SMB1. This change inadvertently disabled the ability of the file manager to browse the network - at least for netbios names. They fixed it for smbtree by temporarily dropping down to SMB1 ( what samba calls NT1 ) but they haven't fixed it for libsmbclient which is what gvfs uses.

    Note: This is a browsing problem not a host name resolution problem. You can still connect to the other machine by name but you must do it explicitly.

    EDIT: I actually talked about this before 18.04 was released: Bionic Beaver can not discover samba hosts - netbios.
    Last edited by Morbius1; June 16th, 2018 at 03:53 PM.

  3. #3
    Join Date
    Nov 2016
    Beans
    12

    Talking Re: [Solved] Nautilus in 18.04 can't browse samba network tree

    OK. SO why the smbtree,smbclient commands work but Nautilus and -> gvfs-smb-browse does not?
    And I do not have to put "client max protocol = NT1" in smb.conf for the smbtree to work and browse thru the smb network. But gvfs-smb-browse has a problem and that is why Nautilus can not browse sabma network.
    It is Gnome gvfs problem. But what it is exactly? The debug message from gvfs is not really helpful here, is it?
    There is a thread about it at RedHat Bugzilla and there also this patch for gvfs-smb-browse which forces it to switch to NT1 what smbtree and smbclient are doing now by design. It is not safe to use NT1 on all samba. After recompilation of gvfs-smb-browse Nautilus displays smbtree.

  4. #4
    Join Date
    Nov 2016
    Beans
    12

    Re: Nautilus in 18.04 can't browse samba network tree

    Analazing source code I found GVFS_SMB_DEBUG variable
    Code:
    killall gvfsd-smb-browse && GVFS_SMB_DEBUG=1 /usr/lib/gvfs/gvfsd-smb-browse
    gives this:
    Code:
    Using netbios name UBUNTU BIONIC.
    Using workgroup WORKGROUP.
    Kerberos auth with 'user@WORKGROUP' (WORKGROUP\user) to access '192.168.1.1' not possible
    WARNING: The "syslog" option is deprecated
    Using netbios name UBUNTU BIONIC.
    Using workgroup WORKGROUP.
    SPNEGO: Could not find a suitable mechtype in NEG_TOKEN_INIT
    Performing aggressive shutdown.
    Kerberos auth with 'user@WORKGROUP' (WORKGROUP\user) to access '192.168.1.1' not possible

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •