Results 1 to 2 of 2

Thread: Why no HDMi after boot

  1. #1
    Join Date
    Oct 2016
    Beans
    6

    Why no HDMi after boot

    Hi all, I've acquired an Industrial Pc. Its a Core i5 with a Zotac ZT-60404 GPU. Ive got 5GB of ram in it and have loaded Stretch with Gnome after Ubuntu, Puppy and LXLE. The GPU has 2 DVI-I outs and a mini HDMI. I used to use a Raspberry Pi 2 but found it slow for watching Youtube videos or OnLine Catchup services. I have a Projector, a cheap Chinese unit from ebay. This Thing supports 1080 HD and has a resolution of 800 x 600.

    Ive bought a DVI-I to HDMI adapter, this machine boots with a DVI-I to VGA adapter on both ports, but HDMI is blank. So I figured using DVI-I to HDMI would work. It doesn't.

    When I boot, my Monitor is blank, I get the Boot Splash screen up on the Projector, then as the OS loads, the projector turns off, and the monitor takes over, if you like.

    xrandr says I have a monitor attached to DVI-I -1 and DVI-I-2 and HDMI are disconnected, I've tried swapping my outputs around, but no joy.

    I know my adapters and leads are good, I see the Boot Splash screen, but once the OS runs, the projector displays No Signal.

    My monitor is DVI-I to VGA and works both ports, the projector can work DVI-I to VGA as well, HDMI would give me a better picture etc

    I'm not seeing Update Hardware drivers as in install Nvidia so I guess I'm using Nouveau drivers, or not seeing as xrandr says its disconnected!

    Any ideas welcome

    Thanks

  2. #2
    Join Date
    Apr 2011
    Beans
    78

    Re: Why no HDMi after boot

    Could it be the input source on the projector needs changing?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •