I got this…
Code:
zobeid@zobeid-desktop:~$ lsusb
Bus 004 Device 007: ID 0451:8140 Texas Instruments, Inc.
Bus 004 Device 005: ID 2109:0812 VIA Labs, Inc. VL812 Hub
Bus 004 Device 006: ID 0451:8140 Texas Instruments, Inc.
Bus 004 Device 004: ID 0451:8140 Texas Instruments, Inc.
Bus 004 Device 003: ID 0451:8140 Texas Instruments, Inc.
Bus 004 Device 002: ID 0525:3101 Netchip Technology, Inc.
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 010: ID 0451:ca01 Texas Instruments, Inc.
Bus 003 Device 008: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 003 Device 006: ID 2109:2812 VIA Labs, Inc. VL812 Hub
Bus 003 Device 004: ID 5332:1400
Bus 003 Device 011: ID 0451:ca01 Texas Instruments, Inc.
Bus 003 Device 009: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 003 Device 015: ID feed:2260
Bus 003 Device 016: ID 195d:6008 Itron Technology iONE
Bus 003 Device 003: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 003 Device 002: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0aa7 Intel Corp.
Bus 001 Device 006: ID 04b8:013a Seiko Epson Corp. GT-X820 [Perfection V600 Photo]
Bus 001 Device 004: ID 04f9:0061 Brother Industries, Ltd
Bus 001 Device 003: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code:
zobeid@zobeid-desktop:~$ sudo scanimage -L
[bjnp] create_broadcast_socket: ERROR - bind socket to local address failed - Address already in use
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
Code:
zobeid@zobeid-desktop:~$ sudo scanimage --help
Usage: scanimage [OPTION]...
Start image acquisition on a scanner device and write image data to
standard output.
Parameters are separated by a blank from single-character options (e.g.
-d epson) and by a "=" from multi-character options (e.g. --device-name=epson).
-d, --device-name=DEVICE use a given scanner device (e.g. hp:/dev/scanner)
--format=pnm|tiff|png|jpeg file format of output file
-i, --icc-profile=PROFILE include this ICC profile into TIFF file
-L, --list-devices show available scanner devices
-f, --formatted-device-list=FORMAT similar to -L, but the FORMAT of the output
can be specified: %d (device name), %v (vendor),
%m (model), %t (type), %i (index number), and
%n (newline)
-b, --batch[=FORMAT] working in batch mode, FORMAT is `out%d.pnm' `out%d.tif'
`out%d.png' or `out%d.jpg' by default depending on --format
--batch-start=# page number to start naming files with
--batch-count=# how many pages to scan in batch mode
--batch-increment=# increase page number in filename by #
--batch-double increment page number by two, same as
--batch-increment=2
--batch-print print image filenames to stdout
--batch-prompt ask for pressing a key before scanning a page
--accept-md5-only only accept authorization requests using md5
-p, --progress print progress messages
-n, --dont-scan only set options, don't actually scan
-T, --test test backend thoroughly
-A, --all-options list all available backend options
-h, --help display this help message and exit
-v, --verbose give even more status messages
-B, --buffer-size=# change input buffer size (in kB, default 32)
-V, --version print version information
[bjnp] create_broadcast_socket: ERROR - bind socket to local address failed - Address already in use
scanimage: no SANE devices found
also…
Code:
zobeid@zobeid-desktop:~$ sudo sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
could not fetch string descriptor: Pipe error
found USB scanner (vendor=0x04b8 [EPSON], product=0x013a [EPSON Scanner]) at libusb:001:006
could not fetch string descriptor: Pipe error
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
Adv Reply
Originally Posted by ivo.kovacic.sk
Bookmarks