Results 1 to 10 of 10

Thread: smart-notifier not run prioritary on startup

  1. #1
    Join Date
    Sep 2017
    Beans
    24

    smart-notifier not run prioritary on startup

    Hi

    I suspect smart-notifier run after smartd after reboot my system.

    When I put " -M test " in /etc/smartd.conf and reboot the system ( in inicialization ) the popup alert test not show in my desktop ( this is so after reinstallation smartmontools and smart-notifier two or three times ).

    Any idea to run smart-notifier before the smartd when startup the system ?

    Thanks
    Last edited by henrique-rj; September 11th, 2017 at 12:06 PM.

  2. #2
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    someone ?
    Last edited by henrique-rj; September 10th, 2017 at 10:28 AM.

  3. #3
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    I modified boot sequence of smartmontools and the popup alert test of smart-notifier yet not show.

    I do not know yet why the popup alert test does not appear in boot system.

    .
    Last edited by henrique-rj; September 11th, 2017 at 12:08 PM.

  4. #4
    Join Date
    Dec 2007
    Beans
    12,540

    Re: smart-notifier not run prioritary on startup

    You can tell people more about your system by installing inxi and posting the output of
    Code:
    inxi -Fxzc0
    here.

  5. #5
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    Computer
    ********


    Summary
    -------

    -Computer-
    Processor : AMD Processor model unknown
    Memory : 1983MB (829MB used)
    Operating System : Kaiana 14.04 (Trusty)
    User Name : henrique (Henrique)
    Date/Time : Seg 11 Set 2017 09:01:16 BRT
    -Display-
    Resolution : 1024x768 pixels
    OpenGL Renderer : Gallium 0.4 on llvmpipe (LLVM 3.6, 128 bits)
    X11 Vendor : The X.Org Foundation
    -Multimedia-
    Audio Adapter : VIA8237 - VIA 8237
    -Input Devices-
    Power Button
    Sleep Button
    Power Button
    AT Translated Set 2 keyboard
    ImPS/2 Generic Wheel Mouse
    -Printers (CUPS)-
    Canon_BJC-240
    Canon_MG3600_series
    -SCSI Disks-
    ATA Maxtor 6L080L0
    HL-DT-ST DVD-RAM GH22NP20

    Operating System
    ----------------

    -Version-
    Kernel : Linux 3.13.0-129-generic (x86_64)
    Compiled : #178-Ubuntu SMP Fri Aug 11 12:48:20 UTC 2017
    C Library : Unknown
    Default C Compiler : GNU C Compiler version 4.8.4 (Ubuntu 4.8.4-2ubuntu1~14.04.3)
    Distribution : Kaiana 14.04 (Trusty)
    -Current Session-
    Computer Name : henrique-desktop
    User Name : henrique (Henrique)
    Home Directory : /home/henrique
    -Misc-
    Uptime : 1 hour, 36 minutes
    Load Average : 0.51, 0.49, 0.43

    Kernel Modules
    --------------

    -Loaded Modules-
    zram : Compressed RAM Block Device
    snd_via82xx : VIA VT82xx audio
    snd_mpu401_uart : Routines for control of MPU-401 in UART mode
    snd_ac97_codec : Universal interface for Audio Codec '97
    ac97_bus
    gameport : Generic gameport layer
    snd_pcm : Midlevel PCM code for ALSA.
    snd_page_alloc : Memory allocator for ALSA system.
    snd_seq_midi : Advanced Linux Sound Architecture sequencer MIDI synth.
    snd_seq_midi_event : MIDI byte <-> sequencer event coder
    snd_rawmidi : Midlevel RawMidi code for ALSA.
    snd_seq : Advanced Linux Sound Architecture sequencer.
    snd_seq_device : ALSA sequencer device management
    snd_timer : ALSA timer interface
    rfcomm : Bluetooth RFCOMM ver 1.11
    snd : Advanced Linux Sound Architecture driver for soundcards.
    bnep : Bluetooth BNEP ver 1.3
    bluetooth : Bluetooth Core ver 2.17
    serio_raw : Raw serio driver
    edac_core : Core library routines for EDAC reporting
    k8temp : AMD K8 core temperature monitor
    edac_mce_amd : AMD MCE decoder
    binfmt_misc
    soundcore : Core sound module
    i2c_viapro : vt82c596 SMBus driver
    shpchp : Standard Hot Plug PCI Controller Driver
    mac_hid
    parport_pc : PC-style parallel port driver
    ppdev
    it87 : IT8705F/IT871xF/IT872xF hardware monitoring driver
    hwmon_vid : hwmon-vid driver
    lp
    parport
    btrfs
    xor
    raid6_pq : RAID6 Q-syndrome calculations
    libcrc32c : CRC32c (Castagnoli) calculations
    hid_generic : HID generic driver
    pata_acpi : SCSI low-level driver for ATA in ACPI mode
    usbhid : USB HID core driver
    hid
    psmouse : PS/2 mouse driver
    via_rhine : VIA Rhine PCI Fast Ethernet driver
    mii : MII hardware support library
    pata_via : low-level driver for VIA PATA
    sata_via : SCSI low-level driver for VIA SATA controllers
    floppy

    Boots
    -----

    -Boots-
    Mon Sep 11 07:25 : 3.13.0-129-gener|-
    Mon Sep 11 07:18 : 3.13.0-129-gener|-
    Mon Sep 11 06:09 : 3.13.0-129-gener|-
    Mon Sep 11 03:27 : 3.13.0-129-gener|-
    Sun Sep 10 17:55 : 3.13.0-129-gener|-
    Sun Sep 10 17:12 : 3.13.0-129-gener|-
    Sun Sep 10 17:04 : 3.13.0-129-gener|-
    Sun Sep 10 16:56 : 3.13.0-129-gener|-
    Sun Sep 10 16:37 : 3.13.0-129-gener|-
    Sun Sep 10 05:38 : 3.13.0-129-gener|-
    Sat Sep 9 07:39 : 3.13.0-129-gener|-
    Sat Sep 9 07:26 : 3.13.0-129-gener|-
    Fri Sep 8 19:56 : 3.13.0-129-gener|-
    Fri Sep 8 09:23 : 3.13.0-129-gener|-
    Fri Sep 8 09:20 : 3.13.0-129-gener|-
    Fri Sep 8 09:17 : 3.13.0-129-gener|-
    Fri Sep 8 09:12 : 3.13.0-129-gener|-
    Fri Sep 8 09:09 : 3.13.0-129-gener|-
    Fri Sep 8 05:20 : 3.13.0-129-gener|-
    Fri Sep 8 05:14 : 3.13.0-129-gener|-
    Fri Sep 8 05:04 : 3.13.0-129-gener|-
    Thu Sep 7 19:12 : 3.13.0-129-gener|-
    Thu Sep 7 19:03 : 3.13.0-129-gener|-
    Thu Sep 7 18:20 : 3.13.0-129-gener|-
    Thu Sep 7 18:16 : 3.13.0-129-gener|-
    Thu Sep 7 18:12 : 3.13.0-129-gener|-
    Thu Sep 7 18:06 : 3.13.0-129-gener|-
    Thu Sep 7 18:00 : 3.13.0-129-gener|-
    Thu Sep 7 17:54 : 3.13.0-129-gener|-
    Thu Sep 7 17:50 : 3.13.0-129-gener|-
    Thu Sep 7 10:05 : 3.13.0-129-gener|-
    Thu Sep 7 08:00 : 3.13.0-129-gener|-
    Thu Sep 7 06:28 : 3.13.0-129-gener|-
    Wed Sep 6 09:36 : 3.13.0-129-gener|-
    Wed Sep 6 05:33 : 3.13.0-129-gener|-
    Tue Sep 5 10:34 : 3.13.0-129-gener|-
    Tue Sep 5 07:36 : 3.13.0-129-gener|-
    Tue Sep 5 07:30 : 3.13.0-129-gener|-
    Tue Sep 5 07:24 : 3.13.0-129-gener|-
    Tue Sep 5 07:19 : 3.13.0-129-gener|-
    Tue Sep 5 06:50 : 3.13.0-129-gener|-
    Tue Sep 5 05:41 : 3.13.0-129-gener|-
    Tue Sep 5 05:35 : 3.13.0-129-gener|-
    Mon Sep 4 23:21 : 3.13.0-129-gener|-
    Mon Sep 4 23:17 : 3.13.0-129-gener|-
    Mon Sep 4 22:23 : 3.13.0-129-gener|-
    Mon Sep 4 21:25 : 3.13.0-129-gener|-
    Mon Sep 4 21:18 : 3.13.0-129-gener|-
    Mon Sep 4 20:03 : 3.13.0-129-gener|-
    Mon Sep 4 19:52 : 3.13.0-129-gener|-
    Mon Sep 4 19:41 : 3.13.0-129-gener|-
    Mon Sep 4 19:32 : 3.13.0-129-gener|-
    Mon Sep 4 19:18 : 3.13.0-129-gener|-
    Mon Sep 4 18:50 : 3.13.0-129-gener|-
    Mon Sep 4 06:03 : 3.13.0-129-gener|-
    Sun Sep 3 06:45 : 3.13.0-129-gener|-
    Sun Sep 3 05:27 : 3.13.0-129-gener|-
    Sat Sep 2 16:24 : 3.13.0-129-gener|-

    Languages
    ---------

    -Available Languages-
    en_AG : English language locale for Antigua and Barbuda
    en_AG.utf8 : English language locale for Antigua and Barbuda
    en_AU.utf8 : English locale for Australia
    en_BW.utf8 : English locale for Botswana
    en_CA.utf8 : English locale for Canada
    en_DK.utf8 : English locale for Denmark
    en_GB.utf8 : English locale for Britain
    en_HK.utf8 : English locale for Hong Kong
    en_IE.utf8 : English locale for Ireland
    en_IN : English language locale for India
    en_IN.utf8 : English language locale for India
    en_NG : English locale for Nigeria
    en_NG.utf8 : English locale for Nigeria
    en_NZ.utf8 : English locale for New Zealand
    en_PH.utf8 : English language locale for Philippines
    en_SG.utf8 : English language locale for Singapore
    en_US.utf8 : English locale for the USA
    en_ZA.utf8 : English locale for South Africa
    en_ZM : English locale for Zambia
    en_ZM.utf8 : English locale for Zambia
    en_ZW.utf8 : English locale for Zimbabwe
    pt_BR.utf8 : Portuguese locale for Brasil
    pt_PT.utf8 : Portuguese locale for Portugal

    Filesystems
    -----------

    -Mounted File Systems-
    /dev/sda5 / 39.67 % (17.8 GiB of 29.5 GiB)
    none /sys/fs/cgroup 0.00 % (4.0 KiB of 4.0 KiB)
    udev /dev 0.00 % (953.1 MiB of 953.1 MiB)
    tmpfs /run 0.63 % (192.5 MiB of 193.7 MiB)
    none /run/lock 0.08 % (5.0 MiB of 5.0 MiB)
    none /run/shm 0.01 % (968.3 MiB of 968.4 MiB)
    none /run/user 0.02 % (100.0 MiB of 100.0 MiB)
    /dev/sda1 /media/sda1 7.64 % (323.3 MiB of 350.0 MiB)
    /dev/sda2 /media/sda2 43.22 % (25.0 GiB of 44.0 GiB)
    /dev/sda5 /media/sda5 39.67 % (17.8 GiB of 29.5 GiB)

    Display
    -------

    -Display-
    Resolution : 1024x768 pixels
    Vendor : The X.Org Foundation
    Version : 1.15.1
    -Monitors-
    Monitor 0 : 1024x768 pixels
    -Extensions-
    BIG-REQUESTS
    Composite
    DAMAGE
    DOUBLE-BUFFER
    DPMS
    DRI2
    DRI3
    GLX
    Generic Event Extension
    MIT-SCREEN-SAVER
    MIT-SHM
    Present
    RANDR
    RECORD
    RENDER
    SECURITY
    SGI-GLX
    SHAPE
    SYNC
    X-Resource
    XC-MISC
    XFIXES
    XFree86-DGA
    XFree86-VidModeExtension
    XINERAMA
    XInputExtension
    XKEYBOARD
    XTEST
    XVideo
    -OpenGL-
    Vendor : VMware, Inc.
    Renderer : Gallium 0.4 on llvmpipe (LLVM 3.6, 128 bits)
    Version : 3.0 Mesa 11.0.4
    Direct Rendering : Yes

    Environment Variables
    ---------------------

    -Environment Variables-
    KDE_FULL_SESSION : true
    GS_LIB : /home/henrique/.fonts
    GNOME_KEYRING_PID : 1847
    USER : henrique
    LANGUAGE : pt_BRt:en
    UPSTART_INSTANCE
    XDG_SEAT : seat0
    SESSION : kde-plasma
    SHLVL : 1
    HOME : /home/henrique
    OLDPWD : /home/henrique
    DESKTOP_SESSION : kde-plasma
    GTK_RC_FILES : /etc/gtk/gtkrc:/home/henrique/.gtkrc:/home/henrique/.kde/share/config/gtkrc
    XDG_SEAT_PATH : /org/freedesktop/DisplayManager/Seat0
    KDE_SESSION_VERSION : 4
    KDE_IS_PRELINKED : 1
    INSTANCE
    DBUS_SESSION_BUS_ADDRESS : unix:abstract=/tmp/dbus-dYqqwYaYoJ
    GNOME_KEYRING_CONTROL : /run/user/1000/keyring-R1Vhqi
    MANDATORY_PATH : /usr/share/gconf/kde-plasma.mandatory.path
    SESSIONTYPE
    UPSTART_JOB : startkde
    LOGNAME : henrique
    _ : /usr/bin/python3
    DEFAULTS_PATH : /usr/share/gconf/kde-plasma.default.path
    XDG_SESSION_ID : c1
    GTK2_RC_FILES : /etc/gtk-2.0/gtkrc:/home/henrique/.gtkrc-2.0:/home/henrique/.kde/share/config/gtkrc-2.0
    PATH : /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games
    SELINUX_INIT : YES
    SESSION_MANAGER : local/henrique-desktop:@/tmp/.ICE-unix/2747,unix/henrique-desktop:/tmp/.ICE-unix/2747
    GDM_LANG : pt_BR
    XDG_SESSION_PATH : /org/freedesktop/DisplayManager/Session0
    OOO_FORCE_DESKTOP : gnome
    XCURSOR_THEME : Oxygen_White
    XDG_RUNTIME_DIR : /run/user/1000
    DISPLAY : :0
    LANG : pt_BR.UTF-8
    XDG_CURRENT_DESKTOP : KDE
    XAUTHORITY : /tmp/kde-henrique/xauth-1000-_0
    XDG_GREETER_DATA_DIR : /var/lib/lightdm-data/henrique
    SSH_AUTH_SOCK : /run/user/1000/keyring-R1Vhqi/ssh
    SHELL : /bin/bash
    QT_NO_GLIB : 1
    GDMSESSION : kde-plasma
    UPSTART_EVENTS : started xsession
    KDE_MULTIHEAD : false
    GPG_AGENT_INFO : /tmp/gpg-G01v2J/S.gpg-agent:1872:1
    UPSTART_SESSION : unix:abstract=/com/ubuntu/upstart-session/1000/1752
    XDG_VTNR : 7
    PWD : /usr/share/kcenter
    XDG_CONFIG_DIRS : /etc/xdg/xdg-kde-plasma:/usr/share/upstart/xdg:/etc/xdg
    XDG_DATA_DIRS : /usr/share:/usr/share/kde-plasma:/usr/local/share/:/usr/share/
    KDE_SESSION_UID : 1000
    KDE_MALLOC : 1
    QT_PLUGIN_PATH : /home/henrique/.kde/lib/kde4/plugins/:/usr/lib/kde4/plugins/
    JOB : dbus

    Users
    -----

    -Users-
    root : root
    daemon : daemon
    bin : bin
    sys : sys
    sync : sync
    games : games
    man : man
    lp : lp
    mail : mail
    news : news
    uucp : uucp
    proxy : proxy
    www-data : www-data
    backup : backup
    list : Mailing List Manager
    irc : ircd
    gnats : Gnats Bug-Reporting System (admin)
    nobody : nobody
    libuuid
    syslog
    messagebus
    avahi-autoipd : Avahi autoip daemon
    usbmux : usbmux daemon
    dnsmasq : dnsmasq
    pulse : PulseAudio daemon
    lightdm : Light Display Manager
    avahi : Avahi mDNS daemon
    hplip : HPLIP system user
    henrique : Henrique
    postfix
    debian-spamd
    clamav

    Devices
    *******


    Processor
    ---------

    -Processor-
    Name : AMD Processor model unknown
    Family, model, stepping : 15, 127, 1 (AMD Opteron/Athlon64/FX)
    Vendor : AuthenticAMD
    -Configuration-
    Cache Size : 256kb
    Frequency : 2000.00MHz
    BogoMIPS : 3999.46
    Byte Order : Little Endian
    -Features-
    FDIV Bug : no
    HLT Bug : no
    F00F Bug : no
    Coma Bug : no
    Has FPU : yes
    -Cache-
    Level 1 (Data) : 2-way set-associative, 512 sets, 64KB size
    Level 1 (Instruction) : 2-way set-associative, 512 sets, 64KB size
    Level 2 (Unified) : 16-way set-associative, 256 sets, 256KB size
    -Capabilities-
    fpu : Floating Point Unit
    vme : Virtual 86 Mode Extension
    de : Debug Extensions - I/O breakpoints
    pse : Page Size Extensions (4MB pages)
    tsc : Time Stamp Counter and RDTSC instruction
    msr : Model Specific Registers
    pae : Physical Address Extensions
    mce : Machine Check Architeture
    cx8 : CMPXCHG8 instruction
    apic : Advanced Programmable Interrupt Controller
    sep : Fast System Call (SYSENTER/SYSEXIT)
    mtrr : Memory Type Range Registers
    pge : Page Global Enable
    mca : Machine Check Architecture
    cmov : Conditional Move instruction
    pat : Page Attribute Table
    pse36 : 36bit Page Size Extensions
    clflush : Cache Line Flush instruction
    mmx : MMX technology
    fxsr : FXSAVE and FXRSTOR instructions
    sse : SSE instructions
    sse2 : SSE2 (WNI) instructions
    syscall : SYSCALL and SYSEXIT instructions
    nx : No-execute Page Protection
    mmxext : Extended MMX Technology
    fxsr_opt
    rdtscp : RDTSCP
    lm : LAHF/SAHF in long mode
    3dnowext : Extended 3DNow! Technology
    3dnow : 3DNow! Technology
    rep_good : rep microcode works well on this CPU
    nopl
    extd_apicid
    pni : Streaming SIMD Extension 3 (Prescott New Instruction)
    cx16 : CMPXCHG16B instruction
    lahf_lm : LAHF/SAHF in long mode
    extapic
    cr8_legacy
    3dnowprefetch
    vmmcall

    Memory
    ------

    -Memory-
    Total Memory : 1983200 kB
    Free Memory : 84592 kB
    Buffers : 45272 kB
    Cached : 1069004 kB
    Cached Swap : 0 kB
    Active : 675628 kB
    Inactive : 1096048 kB
    Active(anon) : 355140 kB
    Inactive(anon) : 318452 kB
    Active(file) : 320488 kB
    Inactive(file) : 777596 kB
    Unevictable : 0 kB
    Mlocked : 0 kB
    Virtual Memory : 2539880 kB
    Free Virtual Memory : 2539880 kB
    Dirty : 88 kB
    Writeback : 0 kB
    AnonPages : 657488 kB
    Mapped : 201176 kB
    Shmem : 16192 kB
    Slab : 62968 kB
    SReclaimable : 42136 kB
    SUnreclaim : 20832 kB
    KernelStack : 2744 kB
    PageTables : 33336 kB
    NFS_Unstable : 0 kB
    Bounce : 0 kB
    WritebackTmp : 0 kB
    CommitLimit : 3531480 kB
    Committed_AS : 2034080 kB
    VmallocTotal : 34359738367 kB
    VmallocUsed : 13396 kB
    VmallocChunk : 34359718752 kB
    HardwareCorrupted : 0 kB
    AnonHugePages : 143360 kB
    HugePages_Total : 0
    HugePages_Free : 0
    HugePages_Rsvd : 0
    HugePages_Surp : 0
    Hugepagesize : 2048 kB
    DirectMap4k : 41856 kB
    DirectMap2M : 1988608 kB

    PCI Devices
    -----------

    -PCI Devices-
    Host bridge : VIA Technologies, Inc. K8M800 Host Bridge
    Host bridge : VIA Technologies, Inc. K8M800 Host Bridge
    Host bridge : VIA Technologies, Inc. K8M800 Host Bridge
    Host bridge : VIA Technologies, Inc. K8M800 Host Bridge
    Host bridge : VIA Technologies, Inc. K8M800 Host Bridge
    Host bridge : VIA Technologies, Inc. K8M800 Host Bridge
    PCI bridge : VIA Technologies, Inc. VT8237/8251 PCI bridge [K8M890/K8T800/K8T890 South] (prog-if 00 [Normal decode])
    IDE interface : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    IDE interface : VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    USB controller : VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    USB controller : VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    USB controller : VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    USB controller : VIA Technologies, Inc. VT82xx/62xx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    USB controller : VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
    ISA bridge : VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
    Multimedia audio controller : VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    Ethernet controller : VIA Technologies, Inc. VT6102/VT6103 [Rhine-II] (rev 78)
    Host bridge : Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Host bridge : Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map
    Host bridge : Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Host bridge : Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    VGA compatible controller : VIA Technologies, Inc. K8M800/K8N800/K8N800A [S3 UniChrome Pro] (rev 01) (prog-if 00 [VGA controller])

    USB Devices
    -----------


    Printers
    --------

    -Printers (CUPS)-
    Canon_BJC-240
    Canon_MG3600_series

    Battery
    -------

    -UPS Status-
    Status : TRIM ONLINE
    Time Left : 28.1 Minutes
    Line Voltage : 130.0 Volts
    Load Percent : 17.0 Percent Load Capacity
    -UPS Battery Information-
    Battery Voltage : 13.7 Volts
    Battery Charge : 100.0 Percent
    Battery Date : 2015-12-05
    -UPS Information-
    Model : (null)
    Firmware Version : 876.Q1j.D USB FW:Q1
    Serial Number : 5B1025T22775
    UPS Mode : Stand Alone
    Cable : USB Cable
    UPS Name : BE600N-BR
    -UPS Nominal Values-
    Voltage : 115 Volts
    Battery Voltage : 12.0 Volts
    Power : 600 Watts

    Sensors
    -------


    Input Devices
    -------------

    -Input Devices-
    Power Button
    Sleep Button
    Power Button
    AT Translated Set 2 keyboard
    ImPS/2 Generic Wheel Mouse

    Storage
    -------

    -SCSI Disks-
    ATA Maxtor 6L080L0
    HL-DT-ST DVD-RAM GH22NP20

    DMI
    ---

    -BIOS-
    Date : 12/29/2006
    Vendor : Phoenix Technologies, LTD (www.phoenix.com)
    Version : 6.00 PG
    -Board-
    Name : K8M800-8237
    Vendor

    Resources
    ---------

    -I/O Ports-
    <tt>0000-0000 </tt> : PCI Bus #00
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : IT8705F/IT871xF/IT872xF hardware monitoring driver
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    <tt> 0000-0000 </tt> : VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
    <tt> 0000-0000 </tt> : SCSI low-level driver for VIA SATA controllers
    -Memory-
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt> 00000000-00000000 </tt> : reserved
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : reserved
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt>00000000-00000000 </tt> : PCI Bus #00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : reserved
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : pnp 00:00
    <tt> 00000000-00000000 </tt> : pnp 00:00
    -DMA-
    <tt> 2</tt> : floppy
    <tt> 4</tt> : cascade

  6. #6
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    nothing ?

  7. #7
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    Examining the components of smart-notifier I noticed that it makes use of 3 or more scripts until its popup is shown. As the system boot involves running multiple processes at the same time, some of these smart-notifier scripts end up being interupted. This ends up not displaying the alert popup because its execution has been aborted.

    Is there any way to solve this situation?

    Smart-notifier developers already warn that the alert popup might not work.

  8. #8
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    Is smart-notifier loading late at boot system and not show popup alert test ?

  9. #9
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    In my conception are two possibility

    One is the some script of smart-notifier not work on smartd started. Other, smart-notifier start after smartd.

    One these two possibility has not show popup alert test in startup sistem.

    Someone ?
    Last edited by henrique-rj; September 14th, 2017 at 08:59 PM.

  10. #10
    Join Date
    Sep 2017
    Beans
    24

    Re: smart-notifier not run prioritary on startup

    I was able to solve ...

    I had to edit the script ( in root with Dolphin manager and Kate editor ), smartmontools, in /etc/init.de and just put " sleep 20 " as the first instruction and it was enough to delay loading the smartd in 20 seconds at system startup which gave time for the smart-notifier to load and then yes to show the test popup alert.

    Searching realized that it was possible to use this "sleep" command in shell script and was just testing.

    I now get the smart-notifier popup visual alerts on boot.

    #!/bin/sh -e
    #
    # smartmontools init.d startup script
    #
    # (C) 2003,04,07 Guido Günther <agx@sigxcpu.org>
    #
    # loosely based on the init script that comes with smartmontools which is
    # copyrighted 2002 by Bruce Allen <smartmontools-support@lists.sourceforge.net>
    #
    ### BEGIN INIT INFO
    # Provides: smartmontools
    # Required-Start: $syslog $remote_fs
    # Required-Stop: $syslog $remote_fs
    # Default-Start: 2 3 4 5
    # Default-Stop: 1
    # Short-Description: SMART monitoring daemon
    ### END INIT INFO
    sleep 20
    SMARTCTL=/usr/sbin/smartctl
    DAEMON=/usr/sbin/smartd
    PIDFILE=/var/run/smartd.pid
    .
    Last edited by henrique-rj; September 16th, 2017 at 01:03 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •