I've been using 14.04 for a year with sub 15 second boot times from an old SSD.
Installed 16.04 on new SSD and OK at first but now taking > 90 seconds to boot.
Complete dmesg output here: http://pastebin.com/zg0A2Eip
Extract below, note gap from 7 seconds to 97.
[ 7.338732] audit: type=1400 audit(1463671421.083:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=886 comm="apparmor_parser"
[ 7.338737] audit: type=1400 audit(1463671421.083:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=886 comm="apparmor_parser"
[ 96.944003] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 97.148266] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 97.150211] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 97.150676] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 98.673924] e1000e: eno1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[ 98.673929] e1000e 0000:00:19.0 eno1: 10/100 speed: disabling TSO
[ 98.673961] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 101.822613] usblp1: removed
[ 101.823636] usblp 3-3.4:1.1: usblp1: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x03F0 pid 0xCC11
[ 141.392009] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:30:91:8f:8f:0c:56:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=2873 DF PROTO=2
[ 145.658476] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[ 266.491801] [UFW BLOCK] IN=eno1 OUT= MAC=01:00:5e:00:00:01:30:91:8f:8f:0c:56:08:00 SRC=192.168.1.254 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0xC0 TTL=1 ID=2927 DF PROTO=2
I've tried setting IPv6 Method: Ignore in System Settings, Network but made no difference.
Any suggestions, please?



Adv Reply


Bookmarks