I still can't browse the network and use web at same time

[Thomaz]

How can I enable to use w/ both up like Windows ?
WIFI (cable disconnected)
netstat -rn
Tabela de Roteamento IP do Kernel
Destino Roteador MáscaraGen. Opções MSS Janela irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlp5s0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlp5s0
192.168.124.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0

$ ifconfig -a
enp8s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.19.24.107 netmask 255.255.254.0 broadcast 172.19.25.255
inet6 fe80::226:9eff:feb7:4309 prefixlen 64 scopeid 0x20<link>
ether 00:26:9e:b7:43:09 txqueuelen 1000 (Ethernet)
RX packets 159674 bytes 15326757 (14.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7574 bytes 651158 (635.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Loopback Local)
RX packets 581 bytes 45380 (44.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 581 bytes 45380 (44.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.124.1 netmask 255.255.255.0 broadcast 192.168.124.255
ether 52:54:00:3e:5a:f7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1 bytes 54 (54.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0-nic: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 52:54:00:3e:5a:f7 txqueuelen 500 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlp5s0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 00:24:d6:58:c5:d0 txqueuelen 1000 (Ethernet)
RX packets 86348 bytes 61251657 (58.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 65477 bytes 11223667 (10.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0


WIRED (Wifi off)
$ netstat -rn
Tabela de Roteamento IP do Kernel
Destino Roteador MáscaraGen. Opções MSS Janela irtt Iface
0.0.0.0 172.26.26.1 0.0.0.0 UG 0 0 0 enp8s0
172.19.24.0 0.0.0.0 255.255.254.0 U 0 0 0 enp8s0
172.26.26.1 0.0.0.0 255.255.255.255 UH 0 0 0 enp8s0
192.168.124.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0

$ ifconfig -a
enp8s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 172.19.24.107 netmask 255.255.254.0 broadcast 172.19.25.255
inet6 fe80::226:9eff:feb7:4309 prefixlen 64 scopeid 0x20<link>
ether 00:26:9e:b7:43:09 txqueuelen 1000 (Ethernet)
RX packets 159674 bytes 15326757 (14.6 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 7574 bytes 651158 (635.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Loopback Local)
RX packets 581 bytes 45380 (44.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 581 bytes 45380 (44.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
inet 192.168.124.1 netmask 255.255.255.0 broadcast 192.168.124.255
ether 52:54:00:3e:5a:f7 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1 bytes 54 (54.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

virbr0-nic: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 52:54:00:3e:5a:f7 txqueuelen 500 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

wlp5s0: flags=4098<BROADCAST,MULTICAST> mtu 1500
ether 00:24:d6:58:c5:d0 txqueuelen 1000 (Ethernet)
RX packets 86348 bytes 61251657 (58.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 65477 bytes 11223667 (10.7 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

When cabled, can reach internal machines, butcant't navigate.
When wireless, the opposite.


Thanks

Because when I make clones, the user won't like, if has to change manually. Because Windows do it automatically now. The reason to choose UBUNTU is the Windows similarity.

[newbie-user]

From your routing info, it looks like you have two default routes to the Internet. That's generally not allowed unless you configure some advanced routing. See here: http://www.rjsystems.nl/en/2100-adv-routing.php