Page 1 of 13 12311 ... LastLast
Results 1 to 10 of 121

Thread: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

  1. #1
    Join Date
    Oct 2015
    Beans
    14

    QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Hi, I bought an Acer Aspire E5 laptop with an Atheros Qualcomm QCA9377 168c:0042 which didn't work and i found a bunch of threads saying just that.
    I found today a mailing list saying that now it's supported on ath10k
    http://www.spinics.net/lists/linux-w...msg143027.html
    and it was added on the ath10k github
    https://github.com/kvalo/ath10k-firmware
    I don't know how to install it from github, any help will be appreciated (by me and many others with this card)
    here's my wireless-info.txt

    Code:
    ########## wireless info START ##########
    
    
    Report from: 28 Oct 2015 22:33 ART -0300
    
    
    Booted last: 28 Oct 2015 18:49 ART -0300
    
    
    Script from: 27 Sep 2015 00:34 UTC +0000
    
    
    ##### release ###########################
    
    
    Distributor ID:    Ubuntu
    Description:    Ubuntu 15.04
    Release:    15.04
    Codename:    vivid
    
    
    ##### kernel ############################
    
    
    Linux 3.19.0-31-generic #36-Ubuntu SMP Wed Oct 7 15:04:02 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
    
    
    Parameters: ro, quiet, splash
    
    
    ##### desktop ###########################
    
    
    GNOME
    
    
    ##### lspci #############################
    
    
    02:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
        Subsystem: Acer Incorporated [ALI] Device [1025:096a]
        Kernel driver in use: r8169
    
    
    03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0042] (rev 30)
        Subsystem: Foxconn International, Inc. Device [105b:e09a]
    
    
    04:00.0 3D controller [0302]: NVIDIA Corporation Device [10de:1299] (rev a1)
    
    
    ##### lsusb #############################
    
    
    Bus 003 Device 002: ID 8087:8001 Intel Corp. 
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 003: ID 04f2:b520 Chicony Electronics Co., Ltd 
    Bus 001 Device 002: ID 0489:e09c Foxconn / Hon Hai 
    Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    
    
    ##### PCMCIA card info ##################
    
    
    ##### rfkill ############################
    
    
    0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
    1: acer-wireless: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    2: acer-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
    3: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    
    
    ##### lsmod #############################
    
    
    rt2800usb              28672  0 
    rt2x00usb              24576  1 rt2800usb
    rt2800lib              94208  1 rt2800usb
    rt2x00lib              57344  3 rt2x00usb,rt2800lib,rt2800usb
    crc_ccitt              16384  1 rt2800lib
    ath10k_pci             40960  0 
    ath10k_core           192512  1 ath10k_pci
    ath                    32768  1 ath10k_core
    mac80211              724992  4 rt2x00lib,rt2x00usb,rt2800lib,ath10k_core
    cfg80211              540672  4 ath,mac80211,rt2x00lib,ath10k_core
    acer_wmi               20480  0 
    sparse_keymap          16384  1 acer_wmi
    snd_soc_rt5640         94208  0 
    snd_soc_rl6231         16384  1 snd_soc_rt5640
    snd_soc_core          196608  1 snd_soc_rt5640
    snd_pcm               106496  7 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcm_dmaengine
    wmi                    20480  1 acer_wmi
    video                  20480  2 i915_bpo,acer_wmi
    
    
    ##### interfaces ########################
    
    
    auto lo
    iface lo inet loopback
    
    
    ##### ifconfig ##########################
    
    
    eth0      Link encap:Ethernet  HWaddr <MAC 'eth0' [IF]>  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
    
    
    wlan0     Link encap:Ethernet  HWaddr <MAC 'wlan0' [IF]>  
              inet addr:192.168.0.117  Bcast:192.168.0.255  Mask:255.255.255.0
              inet6 addr: fe80::<IP6 'wlan0' [IF]>/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:144551 errors:0 dropped:0 overruns:0 frame:0
              TX packets:106477 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:196359234 (196.3 MB)  TX bytes:13006488 (13.0 MB)
    
    
    ##### iwconfig ##########################
    
    
    eth0      no wireless extensions.
    
    
    lo        no wireless extensions.
    
    
    wlan0     IEEE 802.11bgn  ESSID:"liniers"  
              Mode:Managed  Frequency:2.437 GHz  Access Point: <MAC 'liniers' [AC1]>   
              Bit Rate=54 Mb/s   Tx-Power=20 dBm   
              Retry short limit:7   RTS thr:off   Fragment thr:off
              Power Management:on
              Link Quality=55/70  Signal level=-55 dBm  
              Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
              Tx excessive retries:419  Invalid misc:2517   Missed beacon:0
    
    
    ##### route #############################
    
    
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    0.0.0.0         192.168.0.1     0.0.0.0         UG    400    0        0 wlan0
    169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 wlan0
    192.168.0.0     0.0.0.0         255.255.255.0   U     400    0        0 wlan0
    
    
    ##### resolv.conf #######################
    
    
    nameserver 127.0.1.1
    
    
    ##### network managers ##################
    
    
    Installed:
    
    
        NetworkManager
    
    
    Running:
    
    
    root       693     1  0 21:49 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon
    
    
    ##### NetworkManager info ###############
    
    
    GENERAL.DEVICE:                         wlan0
    GENERAL.TYPE:                           wifi
    GENERAL.VENDOR:                         Ralink
    GENERAL.PRODUCT:                        802.11 n WLAN
    GENERAL.DRIVER:                         rt2800usb
    GENERAL.DRIVER-VERSION:                 3.19.0-31-generic
    GENERAL.FIRMWARE-VERSION:               N/A
    GENERAL.HWADDR:                         <MAC 'wlan0' [IF]>
    GENERAL.MTU:                            1500
    GENERAL.STATE:                          100 (connected)
    GENERAL.REASON:                         0 (No reason given)
    GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/net/wlan0
    GENERAL.IP-IFACE:                       wlan0
    GENERAL.NM-MANAGED:                     yes
    GENERAL.AUTOCONNECT:                    yes
    GENERAL.FIRMWARE-MISSING:               no
    GENERAL.CONNECTION:                     liniers
    GENERAL.CON-UUID:                       136ccb20-3034-49b6-9f89-d53f86159b0c
    GENERAL.CON-PATH:                       /org/freedesktop/NetworkManager/ActiveConnection/0
    CAPABILITIES.CARRIER-DETECT:            no
    CAPABILITIES.SPEED:                     48 Mb/s
    CONNECTIONS.AVAILABLE-CONNECTION-PATHS: /org/freedesktop/NetworkManager/Settings/{1}
    CONNECTIONS.AVAILABLE-CONNECTIONS[1]:   136ccb20-3034-49b6-9f89-d53f86159b0c | liniers
    WIFI-PROPERTIES.WEP:                    yes
    WIFI-PROPERTIES.WPA:                    yes
    WIFI-PROPERTIES.WPA2:                   yes
    WIFI-PROPERTIES.TKIP:                   yes
    WIFI-PROPERTIES.CCMP:                   yes
    WIFI-PROPERTIES.AP:                     yes
    WIFI-PROPERTIES.ADHOC:                  yes
    IP4.ADDRESS[1]:                         ip = 192.168.0.117/24, gw = 192.168.0.1
    IP4.ROUTE[1]:                           dst = 169.254.0.0/16, nh = 0.0.0.0, mt = 1000
    IP4.DNS[1]:                             192.168.0.1
    DHCP4.OPTION[1]:                        requested_routers = 1
    DHCP4.OPTION[2]:                        requested_domain_search = 1
    DHCP4.OPTION[3]:                        network_number = 192.168.0.0
    DHCP4.OPTION[4]:                        requested_broadcast_address = 1
    DHCP4.OPTION[5]:                        requested_time_offset = 1
    DHCP4.OPTION[6]:                        requested_rfc3442_classless_static_routes = 1
    DHCP4.OPTION[7]:                        requested_host_name = 1
    DHCP4.OPTION[8]:                        host_name = ubentu
    DHCP4.OPTION[9]:                        expiry = 1446166555
    DHCP4.OPTION[10]:                       requested_wpad = 1
    DHCP4.OPTION[11]:                       requested_domain_name = 1
    DHCP4.OPTION[12]:                       next_server = 192.168.0.1
    DHCP4.OPTION[13]:                       broadcast_address = 192.168.0.255
    DHCP4.OPTION[14]:                       dhcp_message_type = 5
    DHCP4.OPTION[15]:                       requested_subnet_mask = 1
    DHCP4.OPTION[16]:                       routers = 192.168.0.1
    DHCP4.OPTION[17]:                       ip_address = 192.168.0.117
    DHCP4.OPTION[18]:                       subnet_mask = 255.255.255.0
    DHCP4.OPTION[19]:                       requested_static_routes = 1
    DHCP4.OPTION[20]:                       dhcp_renewal_time = 43200
    DHCP4.OPTION[21]:                       dhcp_lease_time = 86400
    DHCP4.OPTION[22]:                       domain_name_servers = 192.168.0.1
    DHCP4.OPTION[23]:                       requested_domain_name_servers = 1
    DHCP4.OPTION[24]:                       requested_netbios_name_servers = 1
    DHCP4.OPTION[25]:                       requested_ms_classless_static_routes = 1
    DHCP4.OPTION[26]:                       dhcp_rebinding_time = 75600
    DHCP4.OPTION[27]:                       requested_interface_mtu = 1
    DHCP4.OPTION[28]:                       requested_ntp_servers = 1
    DHCP4.OPTION[29]:                       requested_netbios_scope = 1
    DHCP4.OPTION[30]:                       dhcp_server_identifier = 192.168.0.1
    IP6.ADDRESS[1]:                         ip = fe80::<IP6 'wlan0' [IF]>/64, gw = ::
    
    
    GENERAL.DEVICE:                         eth0
    GENERAL.TYPE:                           ethernet
    GENERAL.VENDOR:                         Realtek Semiconductor Co., Ltd.
    GENERAL.PRODUCT:                        RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    GENERAL.DRIVER:                         r8169
    GENERAL.DRIVER-VERSION:                 2.3LK-NAPI
    GENERAL.FIRMWARE-VERSION:               
    GENERAL.HWADDR:                         <MAC 'eth0' [IF]>
    GENERAL.MTU:                            1500
    GENERAL.STATE:                          20 (unavailable)
    GENERAL.REASON:                         2 (Device is now managed)
    GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.1/net/eth0
    GENERAL.IP-IFACE:                       
    GENERAL.NM-MANAGED:                     yes
    GENERAL.AUTOCONNECT:                    yes
    GENERAL.FIRMWARE-MISSING:               no
    GENERAL.CONNECTION:                     --
    GENERAL.CON-UUID:                       --
    GENERAL.CON-PATH:                       --
    CAPABILITIES.CARRIER-DETECT:            yes
    CAPABILITIES.SPEED:                     unknown
    CONNECTIONS.AVAILABLE-CONNECTION-PATHS: 
    WIRED-PROPERTIES.CARRIER:               off
    
    
    SSID     BSSID              MODE   CHAN  FREQ      RATE       SIGNAL  BARS  SECURITY   ACTIVE  * 
    JM       <MAC 'JM' [AC2]>  Infra  1     2412 MHz  54 Mbit/s  32      ▂▄__  WPA1 WPA2  no        
    liniers  <MAC 'liniers' [AC1]>  Infra  6     2437 MHz  54 Mbit/s  57      ▂▄▆_  WPA2       yes     * 
    
    
    ##### NetworkManager.state ##############
    
    
    [main]
    NetworkingEnabled=true
    WirelessEnabled=true
    WWANEnabled=true
    WimaxEnabled=true
    
    
    ##### NetworkManager.conf ###############
    
    
    [main]
    plugins=ifupdown,keyfile,ofono
    dns=dnsmasq
    
    
    [ifupdown]
    managed=false
    
    
    ##### NetworkManager profiles ###########
    
    
    [[/etc/NetworkManager/system-connections/Fibertel WiFi477]] (600 root)
    [connection] id=Fibertel WiFi477 | type=wifi
    [wifi] ssid=Fibertel WiFi477 | mac-address=<MAC 'wlan0' [IF]>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/liniers]] (600 root)
    [connection] id=liniers | type=wifi
    [wifi] ssid=liniers | mac-address=<MAC 'wlan0' [IF]>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/PHI Desarrollo]] (600 root)
    [connection] id=PHI Desarrollo | type=wifi
    [wifi] ssid=PHI Desarrollo | mac-address=<MAC 'wlan0' [IF]>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/ATTEL]] (600 root)
    [connection] id=ATTEL | type=wifi
    [wifi] ssid=ATTEL | mac-address=<MAC 'wlan0' [IF]>
    [ipv4] method=manual
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/ATTEL3]] (600 root)
    [connection] id=ATTEL3 | type=wifi
    [wifi] ssid=ATTEL3 | mac-address=<MAC 'wlan0' [IF]>
    [ipv4] method=manual
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/McDonalds FREE]] (600 root)
    [connection] id=McDonalds FREE | type=wifi
    [wifi] ssid=McDonalds FREE | mac-address=<MAC 'wlan0' [IF]>
    [ipv6] method=auto
    [ipv4] method=auto
    
    
    [[/etc/NetworkManager/system-connections/WLAN_3]] (600 root)
    [connection] id=WLAN_3 | type=wifi
    [wifi] ssid=WLAN_3 | mac-address=<MAC 'wlan0' [IF]>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    ##### iw reg get ########################
    
    
    Region: America/Argentina/Cordoba (based on set time zone)
    
    
    country 00: DFS-UNSET
        (2402 - 2472 @ 40), (N/A, 20), (N/A)
        (2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
        (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
        (5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
        (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
        (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
        (57240 - 63720 @ 2160), (N/A, 0), (N/A)
    
    
    ##### iwlist channels ###################
    
    
    eth0      no frequency information.
    
    
    lo        no frequency information.
    
    
    wlan0     14 channels in total; available frequencies :
              Channel 01 : 2.412 GHz
              Channel 02 : 2.417 GHz
              Channel 03 : 2.422 GHz
              Channel 04 : 2.427 GHz
              Channel 05 : 2.432 GHz
              Channel 06 : 2.437 GHz
              Channel 07 : 2.442 GHz
              Channel 08 : 2.447 GHz
              Channel 09 : 2.452 GHz
              Channel 10 : 2.457 GHz
              Channel 11 : 2.462 GHz
              Channel 12 : 2.467 GHz
              Channel 13 : 2.472 GHz
              Channel 14 : 2.484 GHz
              Current Frequency:2.437 GHz (Channel 6)
    
    
    ##### iwlist scan #######################
    
    
    eth0      Interface doesn't support scanning.
    
    
    lo        Interface doesn't support scanning.
    
    
    Channel occupancy:
    
    
          1   APs on   Frequency:2.412 GHz (Channel 1)
          1   APs on   Frequency:2.437 GHz (Channel 6)
    
    
    wlan0     Scan completed :
              Cell 01 - Address: <MAC 'liniers' [AC1]>
                        Channel:6
                        Frequency:2.437 GHz (Channel 6)
                        Quality=51/70  Signal level=-59 dBm  
                        Encryption key:on
                        ESSID:"liniers"
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                                  24 Mb/s; 36 Mb/s; 54 Mb/s
                        Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
                        Mode:Master
                        Extra:tsf=0000003cbfe9584a
                        Extra: Last beacon: 140ms ago
                        IE: IEEE 802.11i/WPA2 Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (1) : TKIP
                            Authentication Suites (1) : PSK
              Cell 02 - Address: <MAC 'JM' [AC2]>
                        Channel:1
                        Frequency:2.412 GHz (Channel 1)
                        Quality=37/70  Signal level=-73 dBm  
                        Encryption key:on
                        ESSID:"JM"
                        Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                                  9 Mb/s; 12 Mb/s; 18 Mb/s
                        Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
                        Mode:Master
                        Extra:tsf=00000097649bdc7a
                        Extra: Last beacon: 2644ms ago
                        IE: IEEE 802.11i/WPA2 Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (2) : CCMP TKIP
                            Authentication Suites (1) : PSK
                        IE: WPA Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (2) : CCMP TKIP
                            Authentication Suites (1) : PSK
    
    
    ##### module infos ######################
    
    
    [rt2800usb]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko
    license:        GPL
    firmware:       rt2870.bin
    description:    Ralink RT2800 USB Wireless LAN driver.
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     CDB4A56A88AAEC3126F6347
    depends:        rt2x00lib,rt2800lib,rt2x00usb
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    parm:           nohwcrypt:Disable hardware encryption. (bool)
    
    
    [rt2x00usb]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko
    license:        GPL
    description:    rt2x00 usb library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     B51D09F4F13F9196B61EBE4
    depends:        rt2x00lib,mac80211
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    
    
    [rt2800lib]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko
    license:        GPL
    description:    Ralink RT2800 library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com, Bartlomiej Zolnierkiewicz
    srcversion:     491D0D9622C1740D95E8041
    depends:        rt2x00lib,mac80211,crc-ccitt
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    
    
    [rt2x00lib]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko
    license:        GPL
    description:    rt2x00 library
    version:        2.3.0
    author:         http://rt2x00.serialmonkey.com
    srcversion:     7C3B03973B59C2A2A136B6C
    depends:        mac80211,cfg80211
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    
    
    [ath10k_pci]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
    firmware:       ath10k/QCA988X/hw2.0/board.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware-3.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware-2.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware.bin
    license:        Dual BSD/GPL
    description:    Driver support for Atheros QCA988X PCIe devices
    author:         Qualcomm Atheros
    srcversion:     43DC2B7B76ADD3C9899062A
    depends:        ath10k_core
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    parm:           irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
    parm:           reset_mode:0: auto, 1: warm only (default: 0) (uint)
    
    
    [ath10k_core]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/ath/ath10k/ath10k_core.ko
    license:        Dual BSD/GPL
    description:    Core module for QCA988X PCIe devices.
    author:         Qualcomm Atheros
    srcversion:     9FA596B97B37F20B0E1DE44
    depends:        mac80211,cfg80211,ath
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    parm:           debug_mask:Debugging mask (uint)
    parm:           uart_print:Uart target debugging (bool)
    parm:           p2p:Enable ath10k P2P support (uint)
    parm:           skip_otp:Skip otp failure for calibration in testmode (bool)
    
    
    [ath]
    filename:       /lib/modules/3.19.0-31-generic/kernel/drivers/net/wireless/ath/ath.ko
    license:        Dual BSD/GPL
    description:    Shared library for Atheros wireless LAN cards.
    author:         Atheros Communications
    srcversion:     D89F916A5E804AF040C4D29
    depends:        cfg80211
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    
    
    [mac80211]
    filename:       /lib/modules/3.19.0-31-generic/kernel/net/mac80211/mac80211.ko
    license:        GPL
    description:    IEEE 802.11 subsystem
    srcversion:     6AE775D26377F997426A49D
    depends:        cfg80211
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
    parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
    parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
    parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
    parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
    parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
    
    
    [cfg80211]
    filename:       /lib/modules/3.19.0-31-generic/kernel/net/wireless/cfg80211.ko
    description:    wireless configuration support
    license:        GPL
    author:         Johannes Berg
    srcversion:     F28307769349A31F4B24FC2
    depends:        
    intree:         Y
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    signer:         Magrathea: Glacier signing key
    sig_key:        B4:BA:13:D5:CE:C9:3E:1A:F4:B3:4D:36:DA:1B:D4:FC:FF:A5:44:10
    sig_hashalgo:   sha512
    parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
    parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
    
    
    ##### module parameters #################
    
    
    [rt2800usb]
    nohwcrypt: N
    
    
    [ath10k_pci]
    irq_mode: 0
    reset_mode: 0
    
    
    [ath10k_core]
    debug_mask: 0
    p2p: 0
    skip_otp: N
    uart_print: N
    
    
    [mac80211]
    beacon_loss_count: 7
    ieee80211_default_rc_algo: minstrel_ht
    max_nullfunc_tries: 2
    max_probe_tries: 5
    minstrel_vht_only: Y
    probe_wait_ms: 500
    
    
    [cfg80211]
    cfg80211_disable_40mhz_24ghz: N
    ieee80211_regdom: 00
    
    
    ##### /etc/modules ######################
    
    
    ##### modprobe options ##################
    
    
    [/etc/modprobe.d/blacklist-ath_pci.conf]
    blacklist ath_pci
    
    
    [/etc/modprobe.d/blacklist.conf]
    blacklist evbug
    blacklist usbmouse
    blacklist usbkbd
    blacklist eepro100
    blacklist de4x5
    blacklist eth1394
    blacklist snd_intel8x0m
    blacklist snd_aw2
    blacklist i2c_i801
    blacklist prism54
    blacklist bcm43xx
    blacklist garmin_gps
    blacklist asus_acpi
    blacklist snd_pcsp
    blacklist pcspkr
    blacklist amd76x_edac
    
    
    [/etc/modprobe.d/blacklist-rare-network.conf]
    alias net-pf-3 off
    alias net-pf-6 off
    alias net-pf-9 off
    alias net-pf-11 off
    alias net-pf-12 off
    alias net-pf-19 off
    alias net-pf-21 off
    alias net-pf-36 off
    
    
    [/etc/modprobe.d/intel-microcode-blacklist.conf]
    blacklist microcode
    
    
    [/etc/modprobe.d/iwlwifi.conf]
    remove iwlwifi \
    (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
    && /sbin/modprobe -r mac80211
    
    
    [/etc/modprobe.d/mlx4.conf]
    softdep mlx4_core post: mlx4_en
    
    
    ##### rc.local ##########################
    
    
    exit 0
    
    
    ##### pm-utils ##########################
    
    
    ##### udev rules ########################
    
    
    [/etc/udev/rules.d/70-persistent-net.rules]
    # PCI device 0x10ec:0x8168 (r8169)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
    # USB device 0x:0x (rt2800usb)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'wlan0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
    
    
    ##### dmesg #############################
    
    
    [   24.238934] r8169 0000:02:00.1 eth0: link down
    [  379.302035] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
    [  379.311788] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
    [  405.328651] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
    [  405.344194] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
    [  406.596156] wlan0: authenticate with <MAC 'liniers' [AC1]>
    [  406.608588] wlan0: send auth to <MAC 'liniers' [AC1]> (try 1/3)
    [  406.610040] wlan0: authenticated
    [  406.610184] rt2800usb 1-3:1.0 wlan0: disabling HT/VHT due to WEP/TKIP use
    [  406.613578] wlan0: associate with <MAC 'liniers' [AC1]> (try 1/3)
    [  406.615887] wlan0: RX AssocResp from <MAC 'liniers' [AC1]> (capab=0x411 status=0 aid=5)
    [  406.618662] wlan0: associated
    
    
    ########## wireless info END ############}

    Note: Im using an USB Wireless card 148f:5370 Ralink
    Last edited by dr-cono; October 29th, 2015 at 03:14 AM.

  2. #2
    Join Date
    Aug 2011
    Location
    Berlin, Germany
    Beans
    7,306
    Distro
    Ubuntu Gnome 14.04 Trusty Tahr

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Hi, the firmware is already there, please try

    Code:
    sudo iwconfig wlan0 power off

  3. #3
    Join Date
    May 2014
    Location
    /home
    Beans
    6,171
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    I think this is what will work for now
    Code:
    sudo apt-get install build-essential linux-headers-$(uname -r) git
    echo "options ath10k_core skip_otp=y" | sudo tee /etc/modprobe.d/ath10k_core.conf
    wget https://www.dropbox.com/s/6hl52r0krq3wpxf/backports-20150903b.tar.gz
    tar -zxvf backports-20150903b.tar.gz
    cd backports-20150903
    make defconfig-ath10k
    make
    sudo make install
    git clone https://github.com/kvalo/ath10k-firmware.git
    sudo cp -r ath10k-firmware/ath10k/ /lib/firmware/
    sudo cp -r ath10k-firmware/QCA9377 /lib/firmware/ath10k/
    Reboot

    If it doesn't work, run the wireless script again
    Last edited by jeremy31; October 29th, 2015 at 11:17 AM.

  4. #4
    Join Date
    Oct 2015
    Beans
    14

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Thanks for the replies. I tried what jeremy said and didn't work. Also, i cant use the USB Wireless Dongle.
    Here's the wireless-info.txt
    Code:
    
    ########## wireless info START ##########
    
    
    Report from: 29 Oct 2015 14:10 ART -0300
    
    
    Booted last: 29 Oct 2015 11:01 ART -0300
    
    
    Script from: 27 Sep 2015 00:34 UTC +0000
    
    
    ##### release ###########################
    
    
    Distributor ID:    Ubuntu
    Description:    Ubuntu 15.04
    Release:    15.04
    Codename:    vivid
    
    
    ##### kernel ############################
    
    
    Linux 3.19.0-31-generic #36-Ubuntu SMP Wed Oct 7 15:04:02 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
    
    
    Parameters: ro, --verbose, nosplash, debug
    
    
    ##### desktop ###########################
    
    
    sed: can't read /home/cono/.dmrc: No such file or directory
    
    
    Could not be determined.
    
    
    ##### lspci #############################
    
    
    02:00.1 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 12)
        Subsystem: Acer Incorporated [ALI] Device [1025:096a]
        Kernel driver in use: r8169
    
    
    03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0042] (rev 30)
        Subsystem: Foxconn International, Inc. Device [105b:e09a]
        Kernel driver in use: ath10k_pci
    
    
    ##### lsusb #############################
    
    
    Bus 003 Device 002: ID 8087:8001 Intel Corp. 
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 003: ID 04f2:b520 Chicony Electronics Co., Ltd 
    Bus 001 Device 002: ID 0489:e09c Foxconn / Hon Hai 
    Bus 001 Device 004: ID 148f:5370 Ralink Technology, Corp. RT5370 Wireless Adapter
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    
    
    ##### PCMCIA card info ##################
    
    
    ##### rfkill ############################
    
    
    0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
    1: acer-wireless: Wireless LAN
        Soft blocked: no
        Hard blocked: no
    2: acer-bluetooth: Bluetooth
        Soft blocked: no
        Hard blocked: no
    
    
    ##### lsmod #############################
    
    
    ath10k_pci             45056  0 
    ath10k_core           290816  1 ath10k_pci
    ath                    32768  1 ath10k_core
    mac80211              655360  1 ath10k_core
    cfg80211              548864  3 ath,mac80211,ath10k_core
    compat                 28672  4 cfg80211,mac80211,ath10k_pci,ath10k_core
    acer_wmi               20480  0 
    sparse_keymap          16384  1 acer_wmi
    snd_soc_rt5640         94208  0 
    snd_soc_rl6231         16384  1 snd_soc_rt5640
    snd_soc_core          196608  1 snd_soc_rt5640
    snd_pcm               106496  8 snd_soc_rt5640,snd_soc_core,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller,snd_pcm_dmaengine
    video                  20480  2 i915_bpo,acer_wmi
    wmi                    20480  1 acer_wmi
    
    
    ##### interfaces ########################
    
    
    auto lo
    iface lo inet loopback
    
    
    ##### ifconfig ##########################
    
    
    eth0      Link encap:Ethernet  HWaddr <MAC 'eth0' [IF]>  
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:408 errors:0 dropped:0 overruns:0 frame:0
              TX packets:372 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000 
              RX bytes:68085 (68.0 KB)  TX bytes:44405 (44.4 KB)
    
    
    ##### iwconfig ##########################
    
    
    eth0      no wireless extensions.
    
    
    lo        no wireless extensions.
    
    
    ##### route #############################
    
    
    Kernel IP routing table
    Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
    
    
    ##### resolv.conf #######################
    
    
    nameserver 127.0.1.1
    
    
    ##### network managers ##################
    
    
    Installed:
    
    
        NetworkManager
    
    
    Running:
    
    
    root       614     1  0 14:01 ?        00:00:00 /usr/sbin/NetworkManager --no-daemon
    
    
    ##### NetworkManager info ###############
    
    
    GENERAL.DEVICE:                         eth0
    GENERAL.TYPE:                           ethernet
    GENERAL.VENDOR:                         Realtek Semiconductor Co., Ltd.
    GENERAL.PRODUCT:                        RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    GENERAL.DRIVER:                         r8169
    GENERAL.DRIVER-VERSION:                 2.3LK-NAPI
    GENERAL.FIRMWARE-VERSION:               
    GENERAL.HWADDR:                         <MAC 'eth0' [IF]>
    GENERAL.MTU:                            1500
    GENERAL.STATE:                          20 (unavailable)
    GENERAL.REASON:                         40 (Carrier/link changed)
    GENERAL.UDI:                            /sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.1/net/eth0
    GENERAL.IP-IFACE:                       
    GENERAL.NM-MANAGED:                     yes
    GENERAL.AUTOCONNECT:                    yes
    GENERAL.FIRMWARE-MISSING:               no
    GENERAL.CONNECTION:                     --
    GENERAL.CON-UUID:                       --
    GENERAL.CON-PATH:                       --
    CAPABILITIES.CARRIER-DETECT:            yes
    CAPABILITIES.SPEED:                     100 Mb/s
    CONNECTIONS.AVAILABLE-CONNECTION-PATHS: 
    WIRED-PROPERTIES.CARRIER:               off
    
    
    ##### NetworkManager.state ##############
    
    
    [main]
    NetworkingEnabled=true
    WirelessEnabled=true
    WWANEnabled=true
    WimaxEnabled=true
    
    
    ##### NetworkManager.conf ###############
    
    
    [main]
    plugins=ifupdown,keyfile,ofono
    dns=dnsmasq
    
    
    [ifupdown]
    managed=false
    
    
    ##### NetworkManager profiles ###########
    
    
    [[/etc/NetworkManager/system-connections/Fibertel WiFi477]] (600 root)
    [connection] id=Fibertel WiFi477 | type=wifi
    [wifi] ssid=Fibertel WiFi477 | mac-address=<MAC address>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/liniers]] (600 root)
    [connection] id=liniers | type=wifi
    [wifi] ssid=liniers | mac-address=<MAC address>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/PHI Desarrollo]] (600 root)
    [connection] id=PHI Desarrollo | type=wifi
    [wifi] ssid=PHI Desarrollo | mac-address=<MAC address>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/ATTEL]] (600 root)
    [connection] id=ATTEL | type=wifi
    [wifi] ssid=ATTEL | mac-address=<MAC address>
    [ipv4] method=manual
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/ATTEL3]] (600 root)
    [connection] id=ATTEL3 | type=wifi
    [wifi] ssid=ATTEL3 | mac-address=<MAC address>
    [ipv4] method=manual
    [ipv6] method=auto
    
    
    [[/etc/NetworkManager/system-connections/McDonalds FREE]] (600 root)
    [connection] id=McDonalds FREE | type=wifi
    [wifi] ssid=McDonalds FREE | mac-address=<MAC address>
    [ipv6] method=auto
    [ipv4] method=auto
    
    
    [[/etc/NetworkManager/system-connections/WLAN_3]] (600 root)
    [connection] id=WLAN_3 | type=wifi
    [wifi] ssid=WLAN_3 | mac-address=<MAC address>
    [ipv4] method=auto
    [ipv6] method=auto
    
    
    ##### iw reg get ########################
    
    
    Region: America/Argentina/Cordoba (based on set time zone)
    
    
    country 00: DFS-UNSET
        (2402 - 2472 @ 40), (N/A, 20), (N/A)
        (2457 - 2482 @ 40), (N/A, 20), (N/A), NO-IR
        (2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, NO-IR
        (5170 - 5250 @ 80), (N/A, 20), (N/A), NO-IR
        (5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, NO-IR
        (5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, NO-IR
        (5735 - 5835 @ 80), (N/A, 20), (N/A), NO-IR
        (57240 - 63720 @ 2160), (N/A, 0), (N/A)
    
    
    ##### iwlist channels ###################
    
    
    eth0      no frequency information.
    
    
    lo        no frequency information.
    
    
    ##### iwlist scan #######################
    
    
    eth0      Interface doesn't support scanning.
    
    
    lo        Interface doesn't support scanning.
    
    
    ##### module infos ######################
    
    
    [ath10k_pci]
    filename:       /lib/modules/3.19.0-31-generic/updates/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
    firmware:       ath10k/QCA9377/hw1.0/board.bin
    firmware:       ath10k/QCA9377/hw1.0/firmware-5.bin
    firmware:       ath10k/QCA6174/hw3.0/board.bin
    firmware:       ath10k/QCA6174/hw3.0/firmware-5.bin
    firmware:       ath10k/QCA6174/hw3.0/firmware-4.bin
    firmware:       ath10k/QCA6174/hw2.1/board.bin
    firmware:       ath10k/QCA6174/hw2.1/firmware-5.bin
    firmware:       ath10k/QCA6174/hw2.1/firmware-4.bin
    firmware:       ath10k/QCA988X/hw2.0/board.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware-5.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware-4.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware-3.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware-2.bin
    firmware:       ath10k/QCA988X/hw2.0/firmware.bin
    license:        Dual BSD/GPL
    description:    Driver support for Atheros QCA988X PCIe devices
    author:         Qualcomm Atheros
    version:        backported from Linux (next-20150903-0-ga672f92) using backports backports-20150903-0-g7b34ea2
    srcversion:     0318FD37FAE113D949B6EEB
    depends:        ath10k_core,compat
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    parm:           irq_mode:0: auto, 1: legacy, 2: msi (default: 0) (uint)
    parm:           reset_mode:0: auto, 1: warm only (default: 0) (uint)
    
    
    [ath10k_core]
    filename:       /lib/modules/3.19.0-31-generic/updates/drivers/net/wireless/ath/ath10k/ath10k_core.ko
    license:        Dual BSD/GPL
    description:    Core module for QCA988X PCIe devices.
    author:         Qualcomm Atheros
    srcversion:     96FF163DFC19D168839BAB9
    depends:        mac80211,cfg80211,compat,ath
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    parm:           debug_mask:Debugging mask (uint)
    parm:           uart_print:Uart target debugging (bool)
    parm:           skip_otp:Skip otp failure for calibration in testmode (bool)
    parm:           cryptmode:Crypto mode: 0-hardware, 1-software (uint)
    
    
    [ath]
    filename:       /lib/modules/3.19.0-31-generic/updates/drivers/net/wireless/ath/ath.ko
    license:        Dual BSD/GPL
    description:    Shared library for Atheros wireless LAN cards.
    author:         Atheros Communications
    srcversion:     599C4ECEE9D167A7F2EDD5C
    depends:        cfg80211
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    
    
    [mac80211]
    filename:       /lib/modules/3.19.0-31-generic/updates/net/mac80211/mac80211.ko
    license:        GPL
    description:    IEEE 802.11 subsystem
    version:        backported from Linux (next-20150903-0-ga672f92) using backports backports-20150903-0-g7b34ea2
    srcversion:     BEF453E7AC487F911F8EDBF
    depends:        cfg80211,compat
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
    parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
    parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
    parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
    parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
    
    
    [cfg80211]
    filename:       /lib/modules/3.19.0-31-generic/updates/net/wireless/cfg80211.ko
    version:        backported from Linux (next-20150903-0-ga672f92) using backports backports-20150903-0-g7b34ea2
    description:    wireless configuration support
    license:        GPL
    author:         Johannes Berg
    srcversion:     F6775E4370E54D5795E4BE2
    depends:        compat
    vermagic:       3.19.0-31-generic SMP mod_unload modversions 
    parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
    parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
    
    
    ##### module parameters #################
    
    
    [ath10k_pci]
    irq_mode: 0
    reset_mode: 0
    
    
    [ath10k_core]
    cryptmode: 0
    debug_mask: 0
    skip_otp: Y
    uart_print: N
    
    
    [mac80211]
    beacon_loss_count: 7
    ieee80211_default_rc_algo: minstrel_ht
    max_nullfunc_tries: 2
    max_probe_tries: 5
    probe_wait_ms: 500
    
    
    [cfg80211]
    cfg80211_disable_40mhz_24ghz: N
    ieee80211_regdom: 00
    
    
    ##### /etc/modules ######################
    
    
    ##### modprobe options ##################
    
    
    [/etc/modprobe.d/ath10k_core.conf]
    options ath10k_core skip_otp=y
    
    
    [/etc/modprobe.d/blacklist-ath_pci.conf]
    blacklist ath_pci
    
    
    [/etc/modprobe.d/blacklist.conf]
    blacklist evbug
    blacklist usbmouse
    blacklist usbkbd
    blacklist eepro100
    blacklist de4x5
    blacklist eth1394
    blacklist snd_intel8x0m
    blacklist snd_aw2
    blacklist i2c_i801
    blacklist prism54
    blacklist bcm43xx
    blacklist garmin_gps
    blacklist asus_acpi
    blacklist snd_pcsp
    blacklist pcspkr
    blacklist amd76x_edac
    
    
    [/etc/modprobe.d/blacklist-rare-network.conf]
    alias net-pf-3 off
    alias net-pf-6 off
    alias net-pf-9 off
    alias net-pf-11 off
    alias net-pf-12 off
    alias net-pf-19 off
    alias net-pf-21 off
    alias net-pf-36 off
    
    
    [/etc/modprobe.d/intel-microcode-blacklist.conf]
    blacklist microcode
    
    
    [/etc/modprobe.d/iwlwifi.conf]
    remove iwlwifi \
    (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
    && /sbin/modprobe -r mac80211
    
    
    [/etc/modprobe.d/mlx4.conf]
    softdep mlx4_core post: mlx4_en
    
    
    ##### rc.local ##########################
    
    
    exit 0
    
    
    ##### pm-utils ##########################
    
    
    ##### udev rules ########################
    
    
    [/etc/udev/rules.d/70-persistent-net.rules]
    # PCI device 0x10ec:0x8168 (r8169)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC 'eth0' [IF]>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
    # USB device 0x:0x (rt2800usb)
    SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC address>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"
    
    
    ##### dmesg #############################
    
    
    [   23.171290] r8169 0000:02:00.1 eth0: link down (repeated 2 times)
    [   24.855638] r8169 0000:02:00.1 eth0: link up
    [  357.472760] r8169 0000:02:00.1 eth0: link down
    [  558.100552] rt2x00lib: disagrees about version of symbol ieee80211_register_hw
    [  558.100557] rt2x00lib: Unknown symbol ieee80211_register_hw (err -22)
    [  558.100563] rt2x00lib: disagrees about version of symbol ieee80211_get_hdrlen_from_skb
    [  558.100565] rt2x00lib: Unknown symbol ieee80211_get_hdrlen_from_skb (err -22)
    [  558.100571] rt2x00lib: disagrees about version of symbol ieee80211_wake_queue
    [  558.100572] rt2x00lib: Unknown symbol ieee80211_wake_queue (err -22)
    [  558.100583] rt2x00lib: disagrees about version of symbol ieee80211_get_buffered_bc
    [  558.100585] rt2x00lib: Unknown symbol ieee80211_get_buffered_bc (err -22)
    [  558.100591] rt2x00lib: disagrees about version of symbol wiphy_rfkill_set_hw_state
    [  558.100592] rt2x00lib: Unknown symbol wiphy_rfkill_set_hw_state (err -22)
    [  558.100602] rt2x00lib: disagrees about version of symbol ieee80211_queue_delayed_work
    [  558.100604] rt2x00lib: Unknown symbol ieee80211_queue_delayed_work (err -22)
    [  558.100607] rt2x00lib: disagrees about version of symbol wiphy_rfkill_stop_polling
    [  558.100609] rt2x00lib: Unknown symbol wiphy_rfkill_stop_polling (err -22)
    [  558.100612] rt2x00lib: disagrees about version of symbol ieee80211_ctstoself_get
    [  558.100614] rt2x00lib: Unknown symbol ieee80211_ctstoself_get (err -22)
    [  558.100647] rt2x00lib: Unknown symbol ieee80211_rx (err 0)
    [  558.100666] rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces (err 0)
    [  558.100671] rt2x00lib: disagrees about version of symbol ieee80211_free_txskb
    [  558.100673] rt2x00lib: Unknown symbol ieee80211_free_txskb (err -22)
    [  558.100680] rt2x00lib: disagrees about version of symbol ieee80211_tx_status
    [  558.100681] rt2x00lib: Unknown symbol ieee80211_tx_status (err -22)
    [  558.100684] rt2x00lib: disagrees about version of symbol ieee80211_stop_queue
    [  558.100686] rt2x00lib: Unknown symbol ieee80211_stop_queue (err -22)
    [  558.100690] rt2x00lib: disagrees about version of symbol ieee80211_stop_queues
    [  558.100691] rt2x00lib: Unknown symbol ieee80211_stop_queues (err -22)
    [  558.100697] rt2x00lib: disagrees about version of symbol wiphy_rfkill_start_polling
    [  558.100699] rt2x00lib: Unknown symbol wiphy_rfkill_start_polling (err -22)
    [  558.100702] rt2x00lib: disagrees about version of symbol ieee80211_iterate_active_interfaces_atomic
    [  558.100703] rt2x00lib: Unknown symbol ieee80211_iterate_active_interfaces_atomic (err -22)
    [  558.100715] rt2x00lib: disagrees about version of symbol ieee80211_unregister_hw
    [  558.100716] rt2x00lib: Unknown symbol ieee80211_unregister_hw (err -22)
    [  558.100720] rt2x00lib: disagrees about version of symbol ieee80211_beacon_get_tim
    [  558.100722] rt2x00lib: Unknown symbol ieee80211_beacon_get_tim (err -22)
    [  558.100725] rt2x00lib: disagrees about version of symbol ieee80211_rts_get
    [  558.100726] rt2x00lib: Unknown symbol ieee80211_rts_get (err -22)
    [  558.100735] rt2x00lib: disagrees about version of symbol ieee80211_queue_work
    [  558.100737] rt2x00lib: Unknown symbol ieee80211_queue_work (err -22)
    
    
    ########## wireless info END ############
    notice that
    Code:
    ubentu@cono: dmesg | grep 0042
    [   20.922408] ath10k_pci 0000:03:00.0: device 0042 with chip_id 003820ff isn't supported

  5. #5
    Join Date
    May 2014
    Location
    /home
    Beans
    6,171
    Distro
    Ubuntu 18.04 Bionic Beaver

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Might have to wait on another patch and firmware for your version

    Too uninstall the backports so you can use the other wifi
    Code:
    cd backports-20150903
    sudo make uninstall
    Reboot

  6. #6
    Join Date
    Oct 2015
    Beans
    14

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Thanks, the wireless dongle is working now. I'll try to contact the developer. Thanks a lot.

  7. #7
    Join Date
    Oct 2011
    Beans
    31

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    The patch developer talks of the presence of two different versions of QCA9377 and the patch is for V1.0.

    Seems, either the fw is broken (very improbable) or your QCA9377 is V2.0.
    When support for V1.0 is available, V2.0 shouldn't take long.

    BTW, the QCA9377 is a WL-BT combination chip and the wl part is NFA 435.
    https://wikidevi.com/wiki/Qualcomm_Atheros

    Could you please tell us the date of manufacturing of your device. If it's earlier than August 2015AD, it has to be QCA9377 V1.0 and kvolo's patch and firmware 'should' work. If it doesn't work despite being manufactured earlier than Aug. 15, I suggest making it known to kvolo.

    The V1.1 was released on or after Nov. 21, 2014AD.
    http://certifications.prod.wi-fi.org...d?cid=WFA57190

    The V2.0 was released on or after August 6, 2015AD.

    http://certifications.prod.wi-fi.org...d?cid=WFA61568
    Last edited by howefield; November 9th, 2015 at 10:26 AM.

  8. #8
    Join Date
    Oct 2015
    Beans
    14

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Thanks for the reply.


    Found "MFG Date: 2015/04/24" on the bottom of the laptop.
    Last edited by dr-cono; November 2nd, 2015 at 04:52 AM. Reason: Gave wrong info

  9. #9
    Join Date
    Oct 2011
    Beans
    31

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    Device having mfg month 4 of 2015AD should be V1.0 and 'should' work with the given driver/fw. I'll check with kvolo and fw developer to see what the issue can be.
    Now that we've come so far, I think we have the good new waiting around the corner.

    What we call QCA9377 is actually a 'series' of wifi ac devices. There are a total of 11 different chips.

    http://www.wi-fi.org/product-finder-...ywords=qca9377
    Last edited by howefield; November 9th, 2015 at 10:27 AM.

  10. #10
    Join Date
    Oct 2015
    Beans
    14

    Re: QCA9377 and ath10k on Ubuntu 15.04 (Apparently now it's supported)

    I see, i guess im going to have to wait for it.
    WIll post here once i get it working so people googling find it.
    Thank you for the support.

Page 1 of 13 12311 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •